Related
I pretty much screwed my phone so bad, and I can't seem to the find any solution anywhere...
Here's what I did in order:
-tried rooting it with this guy's guide [link taken down since im a new member, but it's on htconeroot dot com//htc-one-root/how-to-root-htc-one-windowsmaclinux/]
[keep in mind it's S-On with HBoot 1.55]
-found out TWRP wasn't updated so I replaced it with a newer one (2.6.3)
-now rooted device
-wanted to restore to normal stock settings so I downloaded the Guru Reset M7 1.26.502.15 and put it in my root folder
-went to recovery to install the guru reset ZIP
-things install, but touch screen doesn't work
problems now:
-can't turn off phone on main screen (tried holding down power, but doesn't restart phone past the 3 second mark)
-can't boot into bootloader from restart
-ruu doesn't work
can anyone provide me with help? please and thank you
EDIT: few things to keep in mind
-everytime i use RUU 3.17.502.3, it loads up black screen with HTC logo int he middle, then I can turn off the phone.
-when loading up, i can load into bootloader
-when choosing recovery/factory reset, it brings up the software update screen, but then goes to red triangle
-at red triangle screen, i can reboot system through android recovery system.
-back at square 1, touch screen doesn't work, etc.
All I can say is that I am in the same waters, phone stuck in bootloop, or goes to triangle of death, and PC WILL NOT recognize phone at all so without driver support, I am screwed too.
Added: All I did was unlock through HTCDev, and all hell broke loose, loaded up AIO, and phone freaked upon flashing TWRP. 1.55 HBoot, 4.3 ATT update.
hack14u said:
All I can say is that I am in the same waters, phone stuck in bootloop, or goes to triangle of death, and PC WILL NOT recognize phone at all so without driver support, I am screwed too.
Added: All I did was unlock through HTCDev, and all hell broke loose, loaded up AIO, and phone freaked upon flashing TWRP. 1.55 HBoot, 4.3 ATT update.
Click to expand...
Click to collapse
Here's a solution:
-get into bootloader mode
-fastboot
-plug usb in
-open cmd, then get to where your HTC One rooting stuff is (for example, everything was in a folder on my desktop)
-type "fastboot oem lock"
-your phone should say "relocked"
-open the latest RUU you have
-run things normally
that's how i fixed mine, lemme know if you have any more questions.
i also don't know why your phone has to be "relocked" in order to update it's software.
pztrixwsup said:
Here's a solution:
-get into bootloader mode
-fastboot
-plug usb in
-open cmd, then get to where your HTC One rooting stuff is (for example, everything was in a folder on my desktop)
-type "fastboot oem lock"
-your phone should say "relocked"
-open the latest RUU you have
-run things normally
that's how i fixed mine, lemme know if you have any more questions.
i also don't know why your phone has to be "relocked" in order to update it's software.
Click to expand...
Click to collapse
A thousand thanks, you are my new hero! And if you run the RUU, then go back and re-unlock the bootloader, it only says "unlocked" not tampered.
That's why we need to wait for the issue with Rumrunner S-off for our phones to get squared away. So we can flash other carrier or older software.
---------- Post added at 06:51 PM ---------- Previous post was at 06:40 PM ----------
Has anybody had success with Rumrunner for 3.17.502.3 yet? I have been hitting a wall and am not the only one. The phone is freezing on adb at test 2.1. We have tried flashing the RUU and doing it again, but it fails every time in the same way.
Here's what I get:
Code:
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
[PN0712000-1.55.0000]
Test 2 (ALT): Booting device
Rebooting from fastboot
Waiting for ADB (22/120)
Test 2.1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Waiting for ADB (120/120)
ADB connection failed!!
FIX IT, yes, YOU fix it no!!!FIX IT NOW!!!!!
Reboot command failed!!
Bootloader unlock failed?
Press ENTER to exit
Specifically looking for somebody with 3.17.502.3 to chime in if they've tried it, or one of the most awesome devs that work tirelessly so we common folk may find new ways to nearly-brick our phones :silly:
hack14u said:
A thousand thanks, you are my new hero! And if you run the RUU, then go back and re-unlock the bootloader, it only says "unlocked" not tampered.
Click to expand...
Click to collapse
Yea no problem bro, i was in your position for the whole day and i stumbled upon a billion sites and eventually trial and error'd the whole way through
Check the discussion in other thread about 4.3 and s-off. We have tried quite a few different things with no luck so far. I even posted in HTC one forums in the support thread. Hoping they will release something soon for our hboot 155.
Sent from my HTC One using xda app-developers app
Hello, I've ran into some trouble with my nexus 9. After the last update my device seems to be bricked, just stuck on the white "google" logo during start up.
I'm trying to flash OEM android on my device and have been unsuccessful because my bootloader seems to be locked, and the only way I can find online is to do it through developer options which I cannot access now since my device is bricked. I've tried the fastboot command oem unlock and permission is denied. Prior to this I have not enabled developer option or usb debugging because I was ok with using stock software.
I can get into bootloader mode and access fastboot USB but I cannot flash my device due to bootloader being locked!
I've also tried Recovery -> wipe all data, and my device is still bricked afterwards!
Is there anything I can do at this point?
I've been running stock software the whole time! Never rooted / unlocked my device.
Forget about it.
Talk to the vendor (google / amazon / etc) the device is FUBAR
I am getting a new one, since there is no way to fix this.
period.
sorry for everyone affected, but google said, that there is no way to fix it.
damn..just called google and they said they will get back to me next week. this is pretty sad
doanb666 said:
Forget about it.
Talk to the vendor (google / amazon / etc) the device is FUBAR
I am getting a new one, since there is no way to fix this.
period.
sorry for everyone affected, but google said, that there is no way to fix it.
Click to expand...
Click to collapse
Ariadust said:
damn..just called google and they said they will get back to me next week. this is pretty sad
Click to expand...
Click to collapse
It seems, I have the same problem. I tried to wipe it several times, it is no use.
Maybe I am completely dumb, but could one not sideload from 5.1.1. to 5.0.2.?
adb sideload <>
is about the only thing that is working. I don't know, how ota-files are created.
Have you tried this?
http://forum.xda-developers.com/nex...-disabling-t2951312/post60702161#post60702161
Put Device in Fastboot mode:
Power and Volume down,
then in the bootloader, go to fastboot.
With the fastboot tool (google), type:
fastboot format cache
fastboot format:ext4 userdata
It fixed it for some users, because wiping the userdata is apparently different from a factory reset in the boot loader.
For me, it did not work out: I did not end in a boot loop but in a neverending boot sequence.
Trying to flash 5.1.1 on my N6; now stuck on colored dot bootloop. Tried fastboot format cache and fastboot format userdata; both fail because the bootloader is locked.
Google has completely ruined this. I've owned the Galaxy Nexus, Nexus 4, and Nexus 5, and I *never* had a single issue doing simple **** like this on those phones. Here, everything fails. All the time. This time it's failed hard enough, evidently, to cause a permanent brick. Thanks a lot, Google.
Hey everyone, so I woke up Saturday morning to a wonderful surprise, and am just getting around to letting everyone know and maybe throw their suggestions my way!
Device: Tmo LG V10, H901
Recovery: [TWRP] Recovery: V10_H901_pplus [V3.0.2-0] [08/16/2016]
ROM: [ROM] [STOCK] [H901] V10_H901_V20J_Stock_Custom_2e [08/15/2016]; V10_H901_V20J_Stock_Custom_2e-signed
Root: Systemless Instructions - How to - 08/08/2016
Xposed: Systemless Xposed, see root guide above
Friday night, I was using my T-Mobile V10 like normal. No recent modifications, no new apps, adjustments, etc... Plug it into the charger and go to bed for the night. No issues right?
I wake up Saturday and the screen is blank. The phone isn't responding to the power button, so I hold the Vol-Down+Vol-Up+Power down to reboot it.
The phone won't reboot. So I pull the battery, and throw it back in.
Phone hits the LG logo, yey!
But it never moves from the LG logo
So at this point, I try booting into Recovery (TWRP) and the phone seems to not be responding to my button commands. It hits the boot logo and never does anything else.
I tried to boot into Download mode, nothing, just sitting on the logo.
After messing with the phone, with and without a USB cable attached to my laptop, I finally get the device into Fastboot.
In fastboot, I can run commands, but since I am on V20J, I am unable to flash or boot TWRP
I was also able to get into download mode when plugged into my PC only.
So down below, I will go over all the stuff I have tried.
Modes I can enter-
Fastboot
Download Mode (USB)
Stuff I tried-
LG Bridge Update
Update says it succeeds
Still does not boot
When I reconnect LG Bridge again, it says an error occurred and wants to update again
Direct .img flash via Fastboot
Using the steps from this post
Unable to flash, FAILED (remote:unknown command) due to V20J I believe
Flash V20J .tot via LGUP
It seems to flash successfully, but the phone still doesn't boot
So I left for the T-Mobile store Saturday, phone not booting, just stuck on the logo.
They are Warrantying the phone, so I am just waiting on a back-ordered replacement now.
EDIT: The Plot Thickens....
So I thought I would fire up the phone this morning, maybe try some other updates/flashes again, maybe something will happen.
Now I cant even get into Download Mode (USB) anymore.
It shows Download Mode on the screen, then the phone just reboots.
Additionally, on first boot I received some sort of error on the screen, but it went away so fast I couldn't read it.
Now I can't get that error to come back for the life of me...
I am just so confused now. The phone has a mind of its own.
My brother had 2 V10's that did that. Replaced under warranty.
Exact thing happened to me back on pre mm.. I got into twrp after many many many tries.. Flashed an old back up and phone booted. I was able to get into the phone long enough to relock bootloader before it started the same crap... Warrantied it out and that was that..
Yikes. Making me scared once this warranty is up.... Would hate to just lose a phone randomly for no reason!
Swizzle82 said:
Exact thing happened to me back on pre mm.. I got into twrp after many many many tries.. Flashed an old back up and phone booted. I was able to get into the phone long enough to relock bootloader before it started the same crap... Warrantied it out and that was that..
Click to expand...
Click to collapse
Can you plz guide how you relocked bootloader? I am rooted and using custom rom. Should I first install stock kdz and then give command via fastboot or it must be done with root? Thanks
Waxim1 said:
Can you plz guide how you relocked bootloader? I am rooted and using custom rom. Should I first install stock kdz and then give command via fastboot or it must be done with root? Thanks
Click to expand...
Click to collapse
You can relock via fastboot using the command
Code:
fastboot oem lock
Use the below command to check your current status
Code:
fastboot getvar unlocked
I believe it even says these commands on the screen when in fastboot.
Fenopy said:
You can relock via fastboot using the command
Code:
fastboot oem lock
Use the below command to check your current status
Code:
fastboot getvar unlocked
I believe it even says these commands on the screen when in fastboot.
Click to expand...
Click to collapse
Thnks I jav read these but need to know if i should b on stock rom before locking or what? And any known issue while trying relocking it?
What's needed:
latest Android Pie firmware for Xperia XZ1 (I used 47.2.A.4.41_R4C UK or any version of the 47.2.A.6.30) from XperiFirm
newflasher_v13 tool here
Minimal ADB and Fastboot
TWRP Recovery here
last Magisk.zip here
first copy Magisk.zip to the sd card and insert it into the device
Install TWRP:
launch flashtool and download the latest firmware 47.2.A.4.41_R4C with XperiFirm ....
follow the path C: users / name / .flashTool / firmwares / Download
locate the unzipped firmware, open the folder and delete all the .ta files; then open the boot and partition folders and do the same thing
search the internet or XDA newflasher_v13 tool and place all 7 files in the C: users / name / .flashTool / firmwares / Download / 47.2.A.4.41_R4C folder
connect the device in flash mode
launch the .exe command
press "n" and again "n"
finished the firmware flash unplug the phone
When the first ignition is finished, open the debug and connect the mobile phone to the PC
open the folder Minimal in the path C: Program / Minimal and paste in the folder the recovery.img, run cmd.exe type the following commands
Code:
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery namerecovery.img
fastboot reboot
finished the start of the phone, turn it off and go into recovery mode (volume down + power button)
flash Magisk from the sd
turn on the cell phone and the root is done
Special thanks
oF2pks for the TWRP
munjeni for the newflasher
So, what do we lose in this process? Granted it's been reported that the camera is working without the need for a DRM fix, but do we lose other things like video and sound enchantment options?
I have pie stock...can i start guide from point 10 ?
lilbrat said:
So, what do we lose in this process? Granted it's been reported that the camera is working without the need for a DRM fix, but do we lose other things like video and sound enchantment options?
Click to expand...
Click to collapse
look at this thread for backup/restore your DRM keys
lilbrat said:
So, what do we lose in this process? Granted it's been reported that the camera is working without the need for a DRM fix, but do we lose other things like video and sound enchantment options?
Click to expand...
Click to collapse
In my experience I can tell you that nothing is lost on the camera neither in the sound effects nor the color effects on the photos ...
ilblago81 said:
I have pie stock...can i start guide from point 10 ?
Click to expand...
Click to collapse
Absolutely yes
From the use I note that the recovery doesn't read the internal data, but only the sd card. I still don't understand if it's the firmware that has bugs or the twrp that still isn't calibrated for Adroid Pie.
Edit: I found in the XDA site the recovery for the new firmwre and everything works fine here
Would this work on SOV36 (AU XZ1)?
sinkoo1979 said:
Would this work on SOV36 (AU XZ1)?
Click to expand...
Click to collapse
Honestly I don't know, but if in your device install the firmware that we install in the g8341 means that you can. I'm thinking it's the same thing!
Sorry, but the requirement is always with unlocked bootloader?Thanks
Wait... I'm confused. I need an unlocked bootloader for this correct? Also, am I missing a step? I can't seem to unlock the bootloader. I have the key from Sony, but whenever I turn off the phone and try to enter bootloader mode (volume up + usb charger), the notification light turns blue, and that's it. Nothing appears on my screen, if I type fastboot devices, no devices appear as listed. And if I try to run the line of code, I'm just stuck "waiting for device" and nothing happens? Am I being stupid and missing something? Don't remember having this many issues with my htc m9.
dwang040 said:
Wait... I'm confused. I need an unlocked bootloader for this correct? Also, am I missing a step? I can't seem to unlock the bootloader. I have the key from Sony, but whenever I turn off the phone and try to enter bootloader mode (volume up + usb charger), the notification light turns blue, and that's it. Nothing appears on my screen, if I type fastboot devices, no devices appear as listed. And if I try to run the line of code, I'm just stuck "waiting for device" and nothing happens? Am I being stupid and missing something? Don't remember having this many issues with my htc m9.
Click to expand...
Click to collapse
Are your drivers properly installed reason I am asking is you're not getting a return when you type in fastboot devices, go back to you developer setting, revoke your debugging , then reinstall your drivers turn on USB debugging and see what happens?
lilbrat said:
Are your drivers properly installed reason I am asking is you're not getting a return when you type in fastboot devices, go back to you developer setting, revoke your debugging , then reinstall your drivers turn on USB debugging and see what happens?
Click to expand...
Click to collapse
Hmm, I think I know why it wasn't working? I got the xperia xz1 drivers off of the sony developer website, and I went to device manager and tried to do the legacy driver install, but I keep getting "This device cannot start (code 10)" Maybe that's the issue? And if so, am I installing it wrong or something?
dwang040 said:
Hmm, I think I know why it wasn't working? I got the xperia xz1 drivers off of the sony developer website, and I went to device manager and tried to do the legacy driver install, but I keep getting "This device cannot start (code 10)" Maybe that's the issue? And if so, am I installing it wrong or something?
Click to expand...
Click to collapse
What OS is on your computer?
lilbrat said:
What OS is on your computer?
Click to expand...
Click to collapse
Windows 10
dwang040 said:
Windows 10
Click to expand...
Click to collapse
Did you disable the driver verification signature?
(https://www.howtogeek.com/167723/ho....1-so-that-you-can-install-unsigned-drivers/) then reinstall min adb fastboot drivers and Sony companion and let it detect your phone..
chiacla said:
Sorry, but the requirement is always with unlocked bootloader?Thanks
Click to expand...
Click to collapse
you have to unlock the bootloader
dwang040 said:
Wait... I'm confused. I need an unlocked bootloader for this correct? Also, am I missing a step? I can't seem to unlock the bootloader. I have the key from Sony, but whenever I turn off the phone and try to enter bootloader mode (volume up + usb charger), the notification light turns blue, and that's it. Nothing appears on my screen, if I type fastboot devices, no devices appear as listed. And if I try to run the line of code, I'm just stuck "waiting for device" and nothing happens? Am I being stupid and missing something? Don't remember having this many issues with my htc m9.
Click to expand...
Click to collapse
did you install flashtool? did you install the drivers from the flashtool "drivers" folder? Did you unlocked the bootloader? ther'is no need to work on win10 signature
theflanker said:
did you install flashtool? did you install the drivers from the flashtool "drivers" folder? Did you unlocked the bootloader? ther'is no need to work on win10 signature
Click to expand...
Click to collapse
I was under the impression that flash tool is used to get the latest version of the pi (which I already have as the update rolled out a few days ago)? Not for unlocking the bootloader? As for my bootloader, I'm stuck on that step. I'm following sony's steps on unlocking the bootloader, however, I'm stuck on the fastboot as my device isn't recognized. I guess I'll try again from the top, uninstall all the current drivers and reinstall them again.
I also want to add, whenever I plug my phone in into bootloader mode, the pc does recognize that a device is connected as the notification pops up, but again, "fastboot devices" returns nothing. Is there supposed to be a screen for the bootloader? Or is it just a black screen with the blue led?
theflanker said:
you have to unlock the bootloader
Click to expand...
Click to collapse
He won't be able to unlock his bl till he figures out the issues with his drivers.. whether he uses the ones in flashtool, installs min adb and fastboot drivers or the android sdk..
---------- Post added at 05:34 PM ---------- Previous post was at 05:29 PM ----------
dwang040 said:
I was under the impression that flash tool is used to get the latest version of the pi (which I already have as the update rolled out a few days ago)? Not for unlocking the bootloader? As for my bootloader, I'm stuck on that step. I'm following sony's steps on unlocking the bootloader, however, I'm stuck on the fastboot as my device isn't recognized. I guess I'll try again from the top, uninstall all the current drivers and reinstall them again.
I also want to add, whenever I plug my phone in into bootloader mode, the pc does recognize that a device is connected as the notification pops up, but again, "fastboot devices" returns nothing. Is there supposed to be a screen for the bootloader? Or is it just a black screen with the blue led?
Click to expand...
Click to collapse
Once you get your driver's fixed, just follow the directions given by Sony.. Your phone screen will remain black as all info will be done on your computer..
dwang040 said:
I was under the impression that flash tool is used to get the latest version of the pi (which I already have as the update rolled out a few days ago)? Not for unlocking the bootloader? As for my bootloader, I'm stuck on that step. I'm following sony's steps on unlocking the bootloader, however, I'm stuck on the fastboot as my device isn't recognized. I guess I'll try again from the top, uninstall all the current drivers and reinstall them again.
I also want to add, whenever I plug my phone in into bootloader mode, the pc does recognize that a device is connected as the notification pops up, but again, "fastboot devices" returns nothing. Is there supposed to be a screen for the bootloader? Or is it just a black screen with the blue led?
Click to expand...
Click to collapse
Absolutely no, flashtool doesn't need to unlock the bootloader, rather serves to re-lock it in some xperia devices. To unlock it you have to use cmd commands in adb & fastboot, but you can find it here in the XZ1 section.
The cell screen remains black and a blue led appears if you connect in fastboot mode, if you connect in flash mode the screen remains black, but a green LED appears.
if you have problems with the recognition of the device on your PC I can link my guide, it's in italian but if you use google translator you understand it well here
arslancn said:
look at this thread for backup/restore your DRM keys
Click to expand...
Click to collapse
I've checked out the thread but it appears only a few with the xz1 have tried it and they didn't report the outcome, well except one who somehow managed to turn his device in an expensive paperweight.. But I will check it out this weekend..
the idea is to simply deggogle my a10. i found a few videos on how to do it. however i took the liberty of making a note of the base build number and after searching the internet, i found a firmware farchive that contained several md5 files. i figured i may need this in case anything went wrong.
so i went into settings and developer mode, turned on unlocking oem and usb debugging and attempted to flash the phone by booting into rescue mode (power off phone then power on while holding the volume up button) then selecting boot into bootlader from the menu before using a toll called odin on my pc, which given the threads i've seen on here, most of you are aware odin. i tried to flash the tar file reccomended on the site. odin reported failure. so without rebooting i flashed the firmware that matched my phone my selcting the respective md5 files and telling odin to do it. it reported neither success nor failure but gave a message of something like cs select. i have no idea what that means. however on rebooting the phone it booted fine. no errors or anything, just a completely reset phone. I like to add that this is not may main phone as i am a newbie on this area and wouldn't be so reckless as to experiment on my main phone. hower there is an app on there now called lazade which i beleiv is a shopping app based in the asian continent which isn't where i'm from. i unlocked developer mode once again as it had reset and found that the unlock oem option is missing. is it becasuse of the firmware i burned on it and to i need to reburn another? or is ther another way to get it back?
the baseband version is a105gdxu8cvg2
android 11
one ui 3.1
Your post isn't very clear....have you been able to unlock your bootloader?
The OEM Unlock toggle often disappears if 1) the bootloader is already unlocked, or 2) the system has not yet verified whether OEM unlocking is allowed. This is most likely not a firmware issue.
V0latyle said:
Your post isn't very clear....have you been able to unlock your bootloader?
The OEM Unlock toggle often disappears if 1) the bootloader is already unlocked, or 2) the system has not yet verified whether OEM unlocking is allowed. This is most likely not a firmware issue.
Click to expand...
Click to collapse
it's an old phone. i've had it for a number of years, but i got a new phone recently so i took the oppounity to attempt to degoogle my old one. apparently there's more than one way to do this One is to replace android with other operating system. if youtube is to be beleived. i doubt the phone needs veryfying as it's an old phone although the firmware is fresh. perhaps it is unlocked. in tairness i don't know how to determine that.
fjb59 said:
it's an old phone. i've had it for a number of years, but i got a new phone recently so i took the oppounity to attempt to degoogle my old one. apparently there's more than one way to do this One is to replace android with other operating system. if youtube is to be beleived. i doubt the phone needs veryfying as it's an old phone although the firmware is fresh. perhaps it is unlocked. in tairness i don't know how to determine that.
Click to expand...
Click to collapse
The best I can suggest is to flash a LineageOS GSI without Gapps. There are other custom ROMs available that are sanitized of all Google services.
V0latyle said:
The best I can suggest is to flash a LineageOS GSI without Gapps. There are other custom ROMs available that are sanitized of all Google services.
Click to expand...
Click to collapse
are they available here?
fjb59 said:
are they available here?
Click to expand...
Click to collapse
Just Google LineageOS, they have a website. You should be able to flash a GSI image via TWRP.
V0latyle said:
Just Google LineageOS, they have a website. You should be able to flash a GSI image via TWRP.
Click to expand...
Click to collapse
that's my next goal. i haven't got twirp on there. none of the methods i saw on youtube worked.
fjb59 said:
that's my next goal. i haven't got twirp on there. none of the methods i saw on youtube worked.
Click to expand...
Click to collapse
i found the site for it but the a10 is not listed on thier choice of phones
Assuming your bootloader is already unlocked, here is the TWRP thread for your device., which you probably could have found by searching. Instructions for flashing are in that thread. And here is the LineageOS 19.x GSI thread.
If you haven't unlocked your bootloader yet, that's your first step. Some devices are not bootloader unlockable.
V0latyle said:
Assuming your bootloader is already unlocked, here is the TWRP thread for your device., which you probably could have found by searching. Instructions for flashing are in that thread. And here is the LineageOS 19.x GSI thread.
If you haven't unlocked your bootloader yet, that's your first step. Some devices are not bootloader unlockable.
Click to expand...
Click to collapse
i don't know if i have yet. i went though a process and now the oem unlocking option disappeared ffrom the developer menu. i can boot into the bootload from the rescue menu. I assume that's what you mean.
fjb59 said:
i don't know if i have yet. i went though a process and now the oem unlocking option disappeared ffrom the developer menu. i can boot into the bootload from the rescue menu. I assume that's what you mean.
Click to expand...
Click to collapse
When you're in download mode, you should see OEM LOCK among the text in the upper right of the screen. If this says ON, your bootloader is locked.
V0latyle said:
When you're in download mode, you should see OEM LOCK among the text in the upper right of the screen. If this says ON, your bootloader is locked.
Click to expand...
Click to collapse
oem lock onu1)
looks like it's on. how do i disable it for this phone?
Turn the phone completely off, and leave it off for a few minutes. Then, while holding both Volume buttons together, plug in the USB cable. The device should start in Download mode. Hold Volume + until the bootloader unlock screen appears, then follow the prompt to unlock your bootloader. This will wipe data.
V0latyle said:
Turn the phone completely off, and leave it off for a few minutes. Then, while holding both Volume buttons together, plug in the USB cable. The device should start in Download mode. Hold Volume + until the bootloader unlock screen appears, then follow the prompt to unlock your bootloader. This will wipe data.
Click to expand...
Click to collapse
never shows up. i get to the download screen but pressing the vol up keys doesn't do anything. not even adb can see the device. use debugging is turned on. and usb mode is set to file transfer mode. it weorked finde before i reflashed it. perhaps i need another version of the firmware
development, i noticed the wifi wasn't turned on. i turned it on the went into the development mode. unlock oem was there and ticked
so i did what you said again, this time the option for unlocking oem in download was present. i followed the instructions. it booted and came telling me the oem is unlocked and won't be able to verify the intergrty of the os. now it's doing a reset. i think we got here. what next? you you said twrp?
fjb59 said:
never shows up. i get to the download screen but pressing the vol up keys doesn't do anything. not even adb can see the device. use debugging is turned on. and usb mode is set to file transfer mode. it weorked finde before i reflashed it. perhaps i need another version of the firmware
Click to expand...
Click to collapse
ADB only works in Android or in recovery mode. Samsung devices don't have a fastboot mode.
fjb59 said:
development, i noticed the wifi wasn't turned on. i turned it on the went into the development mode. unlock oem was there and ticked
so i did what you said again, this time the option for unlocking oem in download was present. i followed the instructions. it booted and came telling me the oem is unlocked and won't be able to verify the intergrty of the os. now it's doing a reset. i think we got here. what next? you you said twrp?
Click to expand...
Click to collapse
Yep. Since you don't already have TWRP installed, follow "Method 2" in the thread I linked.
V0latyle said:
ADB only works in Android or in recovery mode. Samsung devices don't have a fastboot mode.
Yep. Since you don't already have TWRP installed, follow "Method 2" in the thread I linked.
Click to expand...
Click to collapse
yep it does. i had a little bit of trouble between installing the first and second file. it kept reporting a corrupt operating system but i noteiced it cycled a reboot wo i held hte power and volume up buttons together when it cycled. this allowed me into rescue mode. from there i was able to power down the phone so i could reboot it back into download mode then upload the rescue file contained in the zip file mentioned. after that it booted ok but keeps claiming that the operating system isn''t offician but then boots into android ok. i expect installing the disable_drm_very app wil fix that. then i can try installign a new os.
but that's for tomorrow
Jjflick said:
I noticed this thread and would like to keep looking
Click to expand...
Click to collapse
i hope it helps you. i've detailed the steps i took as best as i could.