i was able to unlock my moto e 2nd gen 4g lte....... - E 2015 Q&A, Help & Troubleshooting

so i guess the next step would be to root and install custom recovery. so i have 2 very important questions, the first being is there an easy one click root option and if so what is it? ive downloaded king root but dont want to use it if its not going to work. The second question is can someone point me in the direction of a custom recovery for this phone? please and thank you!! note- this is my primary phone so im trying to be extra careful but i have looked everywhere and am running out of patients with this whole processs and am on the verge of trial and error

update: rooted with kingroot on first try....so far so good. now if someone could if possible point me in that same direction i asked to be pointed in in the post above?

heathurrlovelynn said:
update: rooted with kingroot on first try....so far so good. now if someone could if possible point me in that same direction i asked to be pointed in in the post above?
Click to expand...
Click to collapse
Which model is your phone?
Surnia or otus?
For surnia twrp recovery:https://forum.xda-developers.com/mo...quid-twrp-recovery-moto-e-lte-t3137649/page38

I don't think you looked hard enough.
The typical topics you need are right there..
There is no 1 click solution either.. you have to learn this stuff.
It's better that way though.
Until you know how to fix things don;t meddle with anything.
I would advice looking at unlocking your bootloader first.
Then install TWRP (so you can make a backup ASAP)
Then look at custom stuff like Logo's / animations + Root etc.
Random INFO:
Hold down power + volume down to get into Bootloader mode.
Marshmallow needs a patched Bootloader that SuperSu "systemless" can do for you.
Marshmallow needs MTPEabler on XDA i think LOL
Learn Fastboot and driver installs and how to flash the stock firmware by cmd line.
I would bet everyone one of us has bricked their phone so get ready for it.
Your phone needs to be in Android mode to connect normaly with MTP on windows etc.
That will let you have ADB access and move stuff on and off the SDCard or internal storage.
That is an easy driver to install.. sometimes the 2nd driver needs to be installed manually via windows etc.
That Fastboot driver is needed for Fastboot.. which you will have to start the phone in Bootloader mode to use stuff like fastboot flashing firmware commands.
2 major modes and 2 drivers for different purposes.
Take notes ..i did

Related

lg l9 p769 - droid 4.0.4 - i'm lost, could use help, linux user

i have been seeing a lot of threads about rooting this phone, but, they all have windows scripts, even the thread that is said to have a runme.sh does not have it in any of the links that i unzipped - only a runme.bat, but yet, people keep mentioning a runme.sh in it... also, i really don't see any one lying out the steps for doing this with linux.
i'm a noob, and dont really know much about this stuff, but i've done this ONCE before with a galxy exhibit, but it was very easy, i just copied a file to the phone (stock rom?), rebooted into recovery, told it to recover from that file, and i was done.
i have no idea how to do it with my new phone, and so i'm wondering:
1: where can i find the files i need to do this with linux - i just want root, nothing special
2: where can i find the steps necessary to do it - in the easiest manner possible?
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
any help is appreciated.
sentientsystem said:
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
Click to expand...
Click to collapse
Your phone is running ICS 4.0, that is the version which it shipped with. Pretty much everyone on here has upgraded to JB either with software update on the phone or they have manually updated with the offline KDZ flash method.
I dont have any experience in linux so I cant help. I hope you can get your phone rooted!
Sent from my LG-P768 using xda app-developers app
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
sentientsystem said:
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
Click to expand...
Click to collapse
You would need wine and then set it up...
Sent From My Xperia Themed P769
well, i tried that "LGpwn" and it didn't work, as well as a fake lg-recovery app. i figured out that i've got a "10g" phone (P769 V10G ICS). i'm not sure what the next step is. some one mentioned downgrading to JB... is there some where you can point me to for that???
i've GOT to get this t-mobile junk off my damned phone... i've even TRIED to install cyenogenmod, but i can't figure out how to get my phone to go into recovery mode (NOT factory rest) - i've tried volup+power+home and volup+power, and neither seem to be working.
Setup a sandbox, windows xp. LG uses windows, no other way to root as of right now for the t-mobile version.
Sent from my LGMS769 using xda app-developers app
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrade to a samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
sentientsystem said:
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrad to an samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
Click to expand...
Click to collapse
Option #1
If you are rooted on stock T-Mobile 10e or 10g ROM and have the CWM installed from this thread:http://forum.xda-developers.com/showthread.php?t=2095825 follow my instructions.
Place one of these CWM ROM images on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2136204
Place this JB radio firmware from T-Mobile 20d ROM on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2256350
Power off the device.
After power on the back/menu capacitive buttons will flash repetedly. Press Volume down while the lights are flashing and the phone should go into recovery.
Flash the ROM first.
Flash the radio second.
Reboot.
***Notes***
1.) 20d is the latest T-Mobile, 21b is the latest Wind Mobile. Both work.
2.) 21b is lighter/faster but has no wifi-calling.
3.) 21b will require you to manually enter your APN settings for cellular data and MMS. Be sure to write down your APN settings before flashing this ROM.
4.) Some users say battery life sucks on JB. I notice that 21b is better on battery life than 20d.
Option #2.
In Linux install a Windows VM and follow the standard instructions here:
http://forum.xda-developers.com/showthread.php?t=2173465
Use KVM with a GUI or even easier use VirtualBox.
I'm a die hard linux geek too. I even run linux at work while all of our msp software was written for windows. You are better off just running an old copy of xp inside virtualbox trust me its just easier that way. You can use adb if you like (its the same thing the windows users use in their batch files and just rewrite the bash script, but you will save yourself lots of headaches just using virtualbox. -- my .02
Sent from my LG-P769 using xda premium
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
# what's the difference between unlocked boot loaders and being rooted?
# do you have to unlock the bootloader to get root access?
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
My bad. I should have read through your original question all the way before posting. I see that you are not rooted.
If you are on 10e ROM you can root in Linux:
http://forum.xda-developers.com/showthread.php?t=1990705
It will require rewriting the batch script as a Linux shell script. It is possible but nobody has done it yet.
If you are on 10g you will need Windows. I have also answered your questions below.
sentientsystem said:
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
It allows you to boot an un-signed kernel. You can boot custom ROMs basically.
# what's the difference between unlocked boot loaders and being rooted?
Root allows you to `su -` to the root user and own the whole system.
# do you have to unlock the bootloader to get root access?
No.
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
Click to expand...
Click to collapse
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
sentientsystem said:
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
Click to expand...
Click to collapse
Welcome!
I know that a long time ago when I ran VirtualBox in Ubuntu there was something I had to do to allow USB access to the VM.
Here are the current instructions directly from Ubuntu:
https://help.ubuntu.com/community/VirtualBox/USB
Good luck.
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
sentientsystem said:
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
Click to expand...
Click to collapse
Yes you can flash a pre-rooted image. They are available. Use the search?
I posted instructions on the first page showing how to boot recovery.
that's great news - that's all i really needed - i didn't see them before, at least, not conspicuously, but i'll search around again.
and, i must have some how missed your instructions, i'll look again.
thanks!
kevev said:
I posted instructions on the first page showing how to boot recovery.
Click to expand...
Click to collapse
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @everyone for your help.
sentientsystem said:
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
Click to expand...
Click to collapse
I've decided to help you out This page will give you some more info on the P769 and several kdz (roms) for the P769
The fastest way to root is to flash the V21B kdz (this is the Jelly Bean version for Canada) using this guide, http://forum.xda-developers.com/showthread.php?p=36351786
The reason why you want this rom is because it has a vulnerability that is easy to exploit with Jcase apk
Once your followed everything (and rooted), install Super Su and Busybox
Next install artas182x second init CWM (in case you can't find it on his page, the link is here )
Note: you will see blinking led lights when you see the LG logo (booting up) appear after a couple of seconds. To enter the CWM press the vol (-) when the lights start flashing.
After you installed Artas182x CWM you can recover from someones clockworkmod backup.
following info from Cmahendra's thread
Note: only restore CWM backups from P769 versions or MS769!!!!
Or check out the V10B (MetroPCS "JellyBean") CWM backup
Now the only 2 reasons to unlock the bootloader are:
1. Install a safer and better CWM
The reason why is because Artas182x CWM is a second init (bootstrap), so if you mess around with a busybox apk and something goes wrong or you remove a file that is required (for CWM), it will stop operating. You will have to reflash the kdz or fix what you changed to get it working again.) I've had this problem several times while messing around with different busybox apps and etc.
2. Custom roms
(which you stated you are not looking for) not worth talking about right now.
Answer to questions
The only pre rooted roms are clockworkmod backups, lol
The default recovery is useless to us (unless you feel like solving the problem)
Flashing back and forth (ice to jelly) comes with risk, the program used on Windows to flash is buggy at times. The best way (in my opinion) is to flash only when really required and mostly restore from clockwormod backups. The device is actually hard to hard brick, but it will require at lot more knowledge to get your device running again.
---------- Post added at 07:23 PM ---------- Previous post was at 07:16 PM ----------
sentientsystem said:
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @all for your help.
Click to expand...
Click to collapse
So what version are you on right now
Ice? Jelly?
i'm still on ICS for the moment. still trying to understand what i need to do next. re-reading your post for the 2nd time, and all the threads it references. making sure i don't screw any thing up. thinking about upgrading to JB, and trying this CWM. and looking into this "cyanogenmod" some more, to understand why i never see any one on this site mention it, and what all these "other roms" are about. lmao, like i said, i'm way new to this . it's a lot to take in, even for a web developer .
thanks \m/ (>_<) \m/

Need help with root for Galaxy SM-J320VPP / android 6.0.1

i know this is a newer phone but i'm still pretty surprised i haven't been able to find anyone that's rooted it yet. i've been all over the internet it seems. this is the :
Samsung Galaxy J3(6)
SM-J320VPP
Android 6.0.1 Marshamllow
Verizon pre-paid plan/network
i see lots of videos and guides for other j320f or j320p (close but no cigar) and nothing works. what i've tried so far:
- Dev mode enabled, USB debugging and OEM unlocked.
- any/all 1 click root apps. none worked, and i'd like to avoid these anyway unless you know it works 100% for my version. at this point i'll try anything.
- recovery / flash superSU. only i haven't even gotten past flashing a recovery. i've tried several different versions of Odin with several different versions of recovery .tar's and for each combination i've tried Odin simply fails. big red FAIL button in upper left corner. sadness. this seems like what i need help with. i have SuperSU downloaded so if i can just get a custom recovery working for my phone i'm hoping it's a simple process from there of booting into the custom recovery and then installing the SuperSU. presto.
is there no hope? is there no tested, confirmed working recovery that i can flash to my phone using Odin? i've tried Odins 3.07, 3.09, and 3.11.1. various custom recovery .tars but the only one i know for sure is the J2 version official from TWRP's website (yes i know it says J2 but someone on another thread said it's similar enough to someone ELSE's model "j320f" or something so i gave it a shot) the other recovery .tars i tried are suspect since they had generic names "recovery.tar" and were downloaded from links provided in many different "guides" that i've googled.
internet, you have failed me. thus do i issue this challenge to all those mighty phone hackers of the land. come forth and slay the evil giant that is my phone's ludicrous security (seriosuly how is this even a thing still in 2016. my phone can do so much more, so much better but for these shenanigans).
thanks so much in advance!
EDIT: not sure about the bootloader. i may be a complete idiot. yes. ok. i'm onto something. gonna post this anyway for any other poor soul that has this version phone, but i think Odin's probably failing because the bootloader is still locked. and Samsung doesn't make this easy like motorola or HTC. T_T. once more into the fray! i'll see if i can't track down a method for unlocking the bootloader on my phone. should i return victorious i'll go ahead and share my steps with the rest of the class.
EDIT2: there is no waking from this nightmare. i dig and dig and dig and can find no root. *sigh*
-- i've got android studio installed. and the java SDK platform-tools which contains the adb.exe, fastboot.exe, etc.
-- something i should explain here: in all these guides whenever there's a step that requires the phone to be connected to the PC, it simply says to, you know...connect your phone. but MY phone by default only uses the cable for battery charging. i have to (on my phone) swipe down from the top, select the "connected for charging" message bringing up "Use USB For" options, then select "Transferring media files" option. THEN my phone shows up both in my windows explorer and displays as a device when i run "adb devices".
--when i run "adb reboot bootloader" this does the same thing as holding down pwr/home/vol down - phone boots up into a blue (teal?) background with a large down arrow in center, below that it says "downloading...do not turn off target". in the upper left are several lines of system font style text:
ODIN MODE
PRODUCT NAME: SM-J320VPP
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: OFF*
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A1, P1*
SECURE DOWNLOAD: ENABLE
*the R's above may be A's or vice versa...hard to read font. sorry
--but as soon as i've rebooted into this mode, my phone disappears from adb devices' list of devices attached. regardless when i run the "fastboot oem unlock" command from the adb shell on my PC at this point i get the infamous "waiting for any device" message and then, of course, nothing....forever. i've also installed PDAnet but i think it's hitting the same road block where my phone is only using the cable for battery charging and i can't toggle that option from ODIN MODE. there's also a "USB Configuration" choice under development options on the phone that has the same options as "Use USB for" but this doesn't stick when booting into ODIN MODE. sadness. i need to retire my brain thoughts at this point. will post TL;DR. you're a saint of geeks if you've made it through my WoT to here.
EDIT3: just an observation - the only thing (so far) that will detect my phone in ODIN MODE is ODIN itself. is there a way to use ODIN to unlock the bootloader?
TL;DR: i think odin is failing when attempting to flash because of locked bootloader. need help with unlocking bootloader first? phone defaults to use USB cable for charging only so i CAN change that to MTP while phone is on normal and then run "adb reboot bootloader" but then phone vanishes from adb devices list once it reboots (and cable is then only charging). thus, cannot run "adb fastboot oem unlock" cuz it hangs displaying "waiting for any device" -- can i unlock the bootloader on this phone? or did i buy a phone that's IMPOSSIBLE TO ROOT!?!?
I have the same problem! I need to root it to install the Patch to change from CDMA to GSM! Because I tried without root and it tells me "E: Signature verification failed"
Thanks
Still nothing?
This is starting to look hopeless
we need the stock recovery.img to be able to mod it and flash it through odin. the recovery for the verizon version does not match so odin wont allow it. i asked on sammobile and they said verizon only releases ota on the device. so idk what to do. perhaps someone with knowledge on this will help.
so far what ive figured out our situation is:
we need root to get root.
more specifically we need root to pull the recovery and then mod that recovery with twrp and use twrp to gain root. The root methods that worked for the other variant SM-J320P dont appear to work for ours, probably due to having android 6.0.1
till we get root we are stuck. the rest is easyish
News?
There is nowbody that had been rooted his J3 Verizon yet?? We need help with this trouble!
In this forum (http://forum.xda-developers.com/android/help/galaxy-j3-sm-j320vpp-configuring-cdma-t3414049) Sergio said:
" try root with this root is only for Snapdragon 410 MSM8916
http://forum.gsmhosting.com/vbb/f723...t1994-1946985/ "
The J320VPP has a "1.2 GHz, Quad-Core". There is no place that sais it's a "Qualcomm Snapdragon 410 Msm:8916" processor. You think this suggestion could work?
NerdmastaX said:
we need the stock recovery.img to be able to mod it and flash it through odin. the recovery for the verizon version does not match so odin wont allow it. i asked on sammobile and they said verizon only releases ota on the device. so idk what to do. perhaps someone with knowledge on this will help.
so far what ive figured out our situation is:
we need root to get root.
more specifically we need root to pull the recovery and then mod that recovery with twrp and use twrp to gain root. The root methods that worked for the other variant SM-J320P dont appear to work for ours, probably due to having android 6.0.1
till we get root we are stuck. the rest is easyish
Click to expand...
Click to collapse
I think I've managed to get the recovery.img with KIES... However flashing the image I've extracted doesn't work but if anyone is ready to help me port a recovery I might try !
Whusky said:
I think I've managed to get the recovery.img with KIES... However flashing the image I've extracted doesn't work but if anyone is ready to help me port a recovery I might try !
Click to expand...
Click to collapse
im gonna try and do a reflash with kies and grab that file myself, ill work a bit on it because i love this phone but no basic root is driving me insane. if you can beat me to posting tell me how you got the file, otherwise ill post here once i find out. I'm not a top of the line developer but i can work my way around and try my best since nobody else is offering to help.
wish me luck.
sorry for the double post but got the files via the verizon software assistant no problem. it ended up in C:\Users\YOURNAME\AppData\Roaming\Verizon_AR\SM-J320VPP_J320VPPVRU1APC3_FACTORY for me, and even decrypted and unzipped itself for me, now we just need to mod a custom thingy into those files and we can work towards rooting. so as i sit here and watch my phone finish flashing back to factory i will look into how we can mod the recovery. if someone is capable of doing it faster i can upload the files very quickly as its only 1.4 gb
well turns out verizon locks the flashing with signature verfication. so unless verizon changes or root is found for marshmellow there will be zero possible root for this phone.
NerdmastaX said:
sorry for the double post but got the files via the verizon software assistant no problem. it ended up in C:\Users\YOURNAME\AppData\Roaming\Verizon_AR\SM-J320VPP_J320VPPVRU1APC3_FACTORY for me, and even decrypted and unzipped itself for me, now we just need to mod a custom thingy into those files and we can work towards rooting. so as i sit here and watch my phone finish flashing back to factory i will look into how we can mod the recovery. if someone is capable of doing it faster i can upload the files very quickly as its only 1.4 gb
Click to expand...
Click to collapse
Hi I'm currently rooted with TWRP 3.0.2 recovery and mabey this might help http://forum.xda-developers.com/general/help/samsung-galaxy-j3-sm-j320fn-how-to-root-t3369511
Sparko612 said:
Hi I'm currently rooted with TWRP 3.0.2 recovery and mabey this might help http://forum.xda-developers.com/general/help/samsung-galaxy-j3-sm-j320fn-how-to-root-t3369511
Click to expand...
Click to collapse
verizon blocks flashing of modified recoveries. so unless someone finds a root exploit for marshmallow we will have no luck.
Has the kingroot method worked for root on your device ??
NerdmastaX said:
we need the stock recovery.img to be able to mod it and flash it through odin. the recovery for the verizon version does not match so odin wont allow it. i asked on sammobile and they said verizon only releases ota on the device. so idk what to do. perhaps someone with knowledge on this will help.
so far what ive figured out our situation is:
we need root to get root.
more specifically we need root to pull the recovery and then mod that recovery with twrp and use twrp to gain root. The root methods that worked for the other variant SM-J320P dont appear to work for ours, probably due to having android 6.0.1
till we get root we are stuck. the rest is easyish
Click to expand...
Click to collapse
Hi to all, im new here and i am having the exact same problem! You say that there has to be a root specifically for the 6.0.. So i found that in the Chainfire page they have this https://download.chainfire.eu/986/CF-Root/CF-Auto-Root/CF-Auto-Root-j3lteusc-j3lteusc-smj320r4.zip already (i dont know if i can post links, so if i cant, sorry), it is marshmallow but the model is J320R4, so i was wondering if this could be the solution. i'll be waiting here for a response, i seriously love this phone :c
MetAJFA said:
Hi to all, im new here and i am having the exact same problem! You say that there has to be a root specifically for the 6.0.. So i found that in the Chainfire page they have this https://download.chainfire.eu/986/CF-Root/CF-Auto-Root/CF-Auto-Root-j3lteusc-j3lteusc-smj320r4.zip already (i dont know if i can post links, so if i cant, sorry), it is marshmallow but the model is J320R4, so i was wondering if this could be the solution. i'll be waiting here for a response, i seriously love this phone :c
Click to expand...
Click to collapse
No, this is not the solution. When using a utlity like CF Auto Root, it must be specific to your model / carrier. Trying to install that will do 1 of 2 things.
1) Just fail in Odin
or
2) Soft brick your device
Since VZW doesn't bother to put out the full firmware files to reflash the device, it's not worth attempting without having the backup plan of the original firmware to flash via Odin.
an twrp is already available for j320p u can try to root your device using it
es0tericcha0s said:
No, this is not the solution. When using a utlity like CF Auto Root, it must be specific to your model / carrier. Trying to install that will do 1 of 2 things.
1) Just fail in Odin
or
2) Soft brick your device
Since VZW doesn't bother to put out the full firmware files to reflash the device, it's not worth attempting without having the backup plan of the original firmware to flash via Odin.
Click to expand...
Click to collapse
Understood, thank very much you for clearing that out. Since all this is pretty much a kick in the butt, do you think there will be some kind of solution to this or should we just lose hope? :/
can Someone here help me with this.
someone wrote:
I have the same problem, I already got 4G LTE data with the correct APN and also I change to lte/gsm with the help of a network app and with commands in adb shell :
pm clear com.android.providers.telephony
settings put global preferred_network_mode 9
settings put global preferred_network_mode1 9
settings put global preferred_network_mode2 9
Click to expand...
Click to collapse
but i dont know how to initiate this adb mode in the phone. anyone?
anyone fix ?
i have few units J320VPP same problem .. searching for service .
That's a Verizon device with a locked bootloader, you cannot try twrp or modified files meant for 320f or other models on this one.
Sent from my SM-N920G using Tapatalk
So has anyone found any luck with this device? It's driving me crazy not having root

Trying to root htc m8

I have an at&t variant HTC m8, I recently stitched to cricket wireless. SIM swap went fine. I've been wanting to gain root to remove att bloatware. I'm on android version 5.0.2. My main issue is I've gotten nowhere unlocking boot loader using a pc. Tonight I resorted to using kingroot from Google play,which worked on third attempt. However supersu said it needs an update.
So basically I'm lost and trying to find away to gain root without a computer if possible.
I've never used kingroot. What happens if you try to update the root binary?
May be a bit irrelevant. I think you'll need to unlock the bootloader to do what you want (delete bloatware). I don't think kingroot alone will get it done. Reason being, you can't modify the system partition with root alone. You need kernel mod wp_mod, which is flashed with custom recovery TWRP. And you need an unlocked bootloader to flash custom recovery.
What issues did you have exactly when trying to unlock the bootloader?
I believe my main issue was that my pc is out of date running an unauthorized widows 7 lol. I was unable to obtain adb or any twrp files to unlock boot loader hence my attempt at a one click type solution. I think I'm going to read up more and try the whole process over this weekend, but any tips guides or instructions would be helpful. The more I have looked into this the more conflicted things have become.
Lewis715 said:
I was unable to obtain adb or any twrp files to unlock boot loader hence my attempt at a one click type solution.
Click to expand...
Click to collapse
Not sure what "unable to obtain adb" means if you don't explain what happens exactly, where you are trying to get the files, etc. So all I can do is assume, and hope that I don't suggest you do things you already tried.
If you want an adb/fastboot installer, the following should work, and decently up to date: http://forum.xda-developers.com/showthread.php?t=2317790
Otherwise, there are other adb installers if you just type "easy adb" into the XDA search function.
No such thing as TWRP files that can help you unlock the bootloader. By definition, you can't install custom recovery until the bootloader is unlocked, and TWRP is a custom recovery. So nothing can be done with or by any TWRP files until you unlock the bootloader.
Lewis715 said:
I think I'm going to read up more and try the whole process over this weekend, but any tips guides or instructions would be helpful. The more I have looked into this the more conflicted things have become.
Click to expand...
Click to collapse
Again, can't really help with what is "conflicted" unless you give some specific details.
Its understandable that a lot of the threads may be confusing, as the info is often outdated. This is getting to be an old device, and a lot of folks that wrote the various guides have moved on, and not updating the guides.
The following is a pretty good AT&T specific guide: http://forum.xda-developers.com/showthread.php?t=2799796
But as mentioned, some things are outdated:
1) The driver package is old. You can get updated drivers by downloading HTC Sync from the HTC website. After installing (which will also install HTC drivers) you can uninstall Sync, but keep the drivers; if you don't want Sync (but I haven't had any problems keeping it).
2) I believe the Dropbox link for adb installer is dead, but I already gave an alternative above.
3) The TWRP version is really old, don't use it! Get TWRP 3.0.2 from here: https://dl.twrp.me/m8/
The exception might be in the stock Android version on your phone is old, but if you tell me what it says for OS number on the bootloader screen, I can advise more specifically.
4) TWRP version is old, again, don't use it! v2.76 is the latest "stable" version, and you can get it here: https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
Everything else in the guide should still apply.
Vomer's guide is also a good one:
http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
Again, the TWRP version is out of date (use the current one linked above).
You only need to do Sections 0 and 1, as the remainder of the guide (S-off, SuperCID) doesn't apply for what you are doing (unlock bootloader, custom recovery, and root).
Also, highly recommended to make a TWRP backup of the stock ROM, before you root.
After root, flash wp_mod with TWRP to enable system partition changes to stick (and deleting bloatware is a system change). What wp_mod depends on your Android version. But for Marshallow, the wp_mod can be found here (you just need the zip wp_mod, not the whole ROM): http://forum.xda-developers.com/htc-one-m8/development/rom-stock-unlocked-developer-sense-7-t3262894
Thanks for the help I'll give it another try, honestly have no real need to mess with device. I know the phone is old but I still have it and it works better than others I've had.
Lewis715 said:
Thanks for the help I'll give it another try, honestly have no real need to mess with device. I know the phone is old but I still have it and it works better than others I've had.
Click to expand...
Click to collapse
Of course, the vast majority of us don't have any real need to mess with the device. But we do, nonetheless!

Kogan Agora 6 Plus root method? one click root style apps not working, any others?

Kogan agora 6 plus.
android 6.0
i tried, kingoroot, towelroot and kingroot.
All failed, i am now asking around the community on a way to root it for various reasons.
will provide more info about it when it charges.
edit:
Model number: Kogan Agora 6Plus
android version: 6.9
baseband version: MOLY.LR11.W1539.MD.MP.V10.P6, 2016/07/29 14:46
kernal version: 3.18.22
Build number: M1_PLUS_N_AU_KG_M_MT6755_65U_V1.8
custom build version: alps-mp-m0-mp7-v1.5_mlt6755.65u.m_p11
In the developer options, there is a toggle called OEM unlocking. Try toggling it and try rooting again.
I got my device rooted... it's an algerian clone of your device and you can check by yourself (google "iris next e"
At first, I thought that this device is unrootable as I tried every rooting sofrware out there and no one sorked, then I tried some adb methods and neither worked also, but then I tried the last bullet in my gun and that worked
I repacked a TWRP recovery to be compatible with the device and rooted systemlessly with supersu... now I even have exposed and magisk working
If you can make the recovery yourself then do it, if you don't I can share my repacked TWRP with you and show you step by step what to do
On the technical side, what I discovered was that there is no adbd neither adb bridge in stock recovery mode (I even looked for it in the ramdisk and found out it's not loaded) so the repacked TWRP recovery (I got the source TWRP from a Xiaomi m3 forum, the M3 has the same SoC -mt6755- which made it easy to port), I booted the recovery from fastboot and it worked like a charm
p.s: if you dont know what all I said means, don't try it, you might brick your phone!! and please don't try the m3 recovery without porting it cause it will brick your phone for sure!!
I can confirm they device looks identical, I am not very familiar with repacking TWRP, but would be appreciative if you were happy to share.
Jimmy Mossiba Floyd said:
I got my device rooted... it's an algerian clone of your device and you can check by yourself (google "iris next e"
At first, I thought that this device is unrootable as I tried every rooting sofrware out there and no one sorked, then I tried some adb methods and neither worked also, but then I tried the last bullet in my gun and that worked
I repacked a TWRP recovery to be compatible with the device and rooted systemlessly with supersu... now I even have exposed and magisk working
If you can make the recovery yourself then do it, if you don't I can share my repacked TWRP with you and show you step by step what to do
On the technical side, what I discovered was that there is no adbd neither adb bridge in stock recovery mode (I even looked for it in the ramdisk and found out it's not loaded) so the repacked TWRP recovery (I got the source TWRP from a Xiaomi m3 forum, the M3 has the same SoC -mt6755- which made it easy to port), I booted the recovery from fastboot and it worked like a charm
p.s: if you dont know what all I said means, don't try it, you might brick your phone!! and please don't try the m3 recovery without porting it cause it will brick your phone for sure!!
Click to expand...
Click to collapse
ok then: what you'll need to download is:
1. adb minimal drivers (you can find it here on xda)
2. supersu latest systemless zip (2.79 I think it's the latest version) after you've downloaded it, put it in the device's internal memory (yeah just right-click the zip file, chose "send-to" then chose your device)
3. the recovery file which is compressed in zip (unzip it and put the img file in the folder where you've installed adb - c:\adb\ )
after that, when you've got everything set, restart your device in fastboot mode: shut down the phone then put it on by hitting the power button and volume up button.. you're gonna have a three-choices menu that you're gonna scroll with the volume up button, when you've got the cursor on "fastboot" press the volume down button... the device will be put on fastboot mode.
Now back to your pc, open a command prompt, then brows to c:\adb. When you have your command prompt on adb, write this (including the quotes):
fastboot boot "TWRP 3.0.2 by Jemmini.img"
Hit enter... wait a little (while the recovery boots) and then... voila!! all you've got to do is to flash the supersu zip through the recovery and reboot: congratulations your device is now rooted
p.s: I suggest you make a full backup for all the partitions from TWRP before you do anything... you'll thank me for that
Thanks for the elaborate explanation,but I am stuck on:
Jimmy Mossiba Floyd said:
fastboot boot "TWRP 3.0.2 by Jemmini.img"
Click to expand...
Click to collapse
Cmd says that it successfully pushed and booted the image
Code:
downloading 'boot.img'...
OKAY [ 0.717s]
booting...
OKAY [ 0.070s]
finished. total time: 0.799s
...but after a couple of seconds, it reboots to system.
Any Ideas what is happening?
Long time no see hhhhh
ummm really have no idea since it works flawlessly for me but ummmm tell me: do you care if you lose the stock recovery?
I would like to try to flash it but there is a chance that it would not work , therefore having no recovery. I have unlocked my bootloader though.
Ok so instead of:
fastboot boot "TWRP 3.0.2 by Jemmini.img"
Try:
fastboot flash boot "TWRP 3.0.2 by Jemmini.img"
This is only if you're gonna take the risk... If not, just give me time maybe I'm gonna find something for you
Sorry, but I don't want to take the risk. I think the problem is that I am running Android 7.0 which differs from other versions. I have contacted Kogan to see if I can access the source code, but judging by previous threads on Kogan, it is not going to be easy.
Ah ok then I must be wrong! Because my device runs on Marshmallow 6.0 and ther must be a difference between the two (software-side)
I don't know if you can do it but, can I have a system dump so that I can bring you a fix for rooting the device?
P.S: I can assist you to make one if you want!
I am not quite sure how to dump the system (Is it "adb pull /system <whatever path>"). I have run the command, and it seems that adb can't access the /system/bin folder. Is it required for recovery porting? If not I will upload the system.
Sorry for being late, I have no DSL where I live and my data plan came to an end!! I will look for a method to dump the whole system for you. Stay tuned
Kogan has replied back and the kernel is released to the public.
https://assets.kogan.com/files/support_files/KAPHN4G6PA_Kernel/kernel-3.18.tar.gz
I am not very experienced with compiling from the kernel so some help would be nice.
I'm not really into compiling kernels... I wish I could... Gonna see with some developers in the samsung forums may be they'll be willing to help
P.S: I'm really really sorry for being late to help you with rooting the phone.. my only pc is bricked and I need it to send you the files I used to pull and push recovery to the phone
In case it's not much asking, is there a possibility to have the link for the stock firmware from kogan?
Unfortunately, Kogan did not release the stock firmware, just the kernel. I'll too go to the other forums and see if they can help.
Thank you very much for your help, and I hope that you can un-brick your pc.
Installed TWRP but it can't read internal storage.
Also wanting to root my agora 6 plus BUMP
looking for help to root
Goals:
Installing a custom recovery like trwp
Rooting
Flashing Xposed.
its on Nougat (7.0)
I can access the bootloader, fastboot and the default installed "recovery" which when loaded say something macros the lines of no commands give by booting the phone and holding both vol up and the lock/power buttons.
I'm available to talk on discord to speed things up.
I've got a bit of experience rooting the z2 and an old htc pico back in the day but i'm consider me a noob as i haven't done this kinda thing in years and don't even know where to begin.
Cryptic Bore said:
looking for help to root
Goals:
Installing a custom recovery like trwp
Rooting
Flashing Xposed.
its on Nougat (7.0)
I can access the bootloader, fastboot and the default installed "recovery" which when loaded say something macros the lines of no commands give by booting the phone and holding both vol up and the lock/power buttons.
I'm available to talk on discord to speed things up.
I've got a bit of experience rooting the z2 and an old htc pico back in the day but i'm consider me a noob as i haven't done this kinda thing in years and don't even know where to begin.
Click to expand...
Click to collapse
The thing is that I have a similar (identic) phone but Algerian brand that makes the phone is still on marshmallow!
I've still got the phone, but I don't know if my TWRP would work for you!
Quick questions:
0. Is it your daily driver phone? do you have a backup for your photos/data/important files on internal storage? just to put you in the image: I lost all my internal storage as I was playing with ramdisk modifications, hopefully my photos were cloud backed up. So be warned
1. Is your phone's bootloader unlocked?
2. Are you familiar with flashing or booting recoveries or kernels from fastboot?
after you answer I'll guide you through it
Hey thanks for the reply im thinking of teaching myself to build my own port of trwp.
0. It is my daily driver but i only just got it the other day ie. nothing important on there besides two factor authentication which even that i can reset up fairly easily. or just take the sim card out and use sms for that.
I also like to live on the edge a bit place austinpowers.jpg here(my first smart phone i got for my birthday from my rents: i got into a boot loop through flashing with in a week of receiving it and fixed on the fly at uni using the libary computers without my rents knowing my phone was broken xD)
1. Is the boot loader unlocked not sure how to check it on this phone, I do however have dev options unlocked with usb debuging etc turned on aswell as tickbox for "OEM Unlocking" with the description: allow the bootloader to be unlocked which i just have turned on .
2. Yes i do but im a bit out of practice its been years since ive messed around with root on android. Ive got logcat dumps through adb and have got fast boot working (as far as i can tell with the "fastboot" devices query) Got some help from a FB friend who is also going to try helping me make this happen. My previous experience was a HTC pico (the first smart phone i referenced earlier) and a Sony z2 which recently died dropping it which had a duel boot setup with carbon rom being the daily driver/rom.
Jimmy Mossiba Floyd said:
The thing is that I have a similar (identic) phone but Algerian brand that makes the phone is still on marshmallow!
I've still got the phone, but I don't know if my TWRP would work for you!
Quick questions:
0. Is it your daily driver phone? do you have a backup for your photos/data/important files on internal storage? just to put you in the image: I lost all my internal storage as I was playing with ramdisk modifications, hopefully my photos were cloud backed up. So be warned
1. Is your phone's bootloader unlocked?
2. Are you familiar with flashing or booting recoveries or kernels from fastboot?
after you answer I'll guide you through it
Click to expand...
Click to collapse

First smartphone first week Please help install rom

So i just decided to join the rest of the world and get myself a rectangle. so i researched the 1 to 200 dollar range for weeks until i found my new shiny metal friend with great specs and a price that wouldn't keep me up at night. the le max 2 x829. but i love tech and was really looking forward to pushing this phone and learn about all it could do! i was really excited.
Until i started to learn about the many confusing programs needed to install custom roms or make a recovery file. things like that All of which need like 6 different programs all of which seem to need some other program in order to functional. I can't seem to even find a starting point! I HAVE NEVER FELT THIS STUPID IN MY ENTIRE LIFE. Someone please help. what programs do i need for a new os ? How does adb fit into the chain of programs needed to mod android? is twrp the first program needed? how does it all sort...fit to gather? Thanks for any help!
Man, honestly this forum is made to help people, but also people should use the search button. This question has been answered a million times already.
Long story short:
- Connect the phone to the PC and install the drivers (including ADB)
- Unlock bootloader (usually it's already unlocked)
- Download TWRP on your PC
- Install TWRP following the developer's steps
- Download your custom ROM
- Put the ROM on the internal memory
- Boot into TWRP
- Install the new ROM according to the instructions given by the developer and you're done...
valy_cta said:
Man, honestly this forum is made to help people, but also people should use the search button. This question has been answered a million times already.
Long story short:
- Connect the phone to the PC and install the drivers (including ADB)
- Unlock bootloader (usually it's already unlocked)
- Download TWRP on your PC
- Install TWRP following the developer's steps
- Download your custom ROM
- Put the ROM on the internal memory
- Boot into TWRP
- Install the new ROM according to the instructions given by the developer and you're done...
Click to expand...
Click to collapse
including adb? what other drivers do i need? xposed? supersu? ...i have done my research by the way...its just not making alot of sense..thats all. i know all you old pros have probably been at it for years but i never even held a smartphone until 6 days ago ha ha
valy_cta said:
Man, honestly this forum is made to help people, but also people should use the search button. This question has been answered a million times already.
Long story short:
- Connect the phone to the PC and install the drivers (including ADB)
- Unlock bootloader (usually it's already unlocked)
- Download TWRP on your PC
- Install TWRP following the developer's steps
- Download your custom ROM
- Put the ROM on the internal memory
- Boot into TWRP
- Install the new ROM according to the instructions given by the developer and you're done...
Click to expand...
Click to collapse
Also how do you download twrp on you're pc ? it won't let me i have it on my phone but it just keeps leading me to a website to download again.
Serialjwalker said:
Also how do you download twrp on you're pc ? it won't let me i have it on my phone but it just keeps leading me to a website to download again.
Click to expand...
Click to collapse
Do you have it installed on the phone or just downloaded? If it's installed, jump over that step. If it's just downloaded, connect the phone to the pc by cable, transfer the files :cyclops:
I understand your concern. It's because there are a few ways of doing it, and so novices might be confused when comparing two different tutorials.
This one is very complete: https://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
1. Connect your phone, it is supposed to install drivers automatically.
1.1 If not, you'll need to google it, but I believe this toolkit will help you. In fact, this tool is capable of doing all the process for you by simply clicking on some buttons.​2. Install ADB Drivers. There are a few options and it is basically
2.1 @greenManGaming recommends 15 seconds ADB installer.
2.2 (Alternative) Minimal ADB and Fastboot. I've used this one.
2.3 (Alternative) ADB and Fastboot (newer) or Universal ADB and Fastboot (older) from the same dev.
OBS: I'm not sure if the toolkit requires or not one of these options to work properly or if it already does this task.​3. Download TWRP (on your computer).
3.1 Follow the instructions from the official page. In short, put the img into the ADB folder.​4. Follow the commands in the the tutorial mentioned.
4.1 In short, unlock the bootloader, boot twrp, complete backup, reboot into the system, copy the backup to your PC/Cloud service, get back to fastboot mode, flash twrp, then flash your ROM.
OBS: Suggestion for only booting TWRP at the first time is perfectly optional, you can flash it since the beginning but in this case you wouldn't be able to backup the original recovery and everything as the phone came, in case you need go back to request an RMA.​
razmth said:
I understand your concern. It's because there are a few ways of doing it, and so novices might be confused when comparing two different tutorials.
This one is very complete: https://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
1. Connect your phone, it is supposed to install drivers automatically.
1.1 If not, you'll need to google it, but I believe this toolkit will help you. In fact, this tool is capable of doing all the process for you by simply clicking on some buttons.​2. Install ADB Drivers. There are a few options and it is basically
2.1 @greenManGaming recommends 15 seconds ADB installer.
2.2 (Alternative) Minimal ADB and Fastboot. I've used this one.
2.3 (Alternative) ADB and Fastboot (newer) or Universal ADB and Fastboot (older) from the same dev.
OBS: I'm not sure if the toolkit requires or not one of these options to work properly or if it already does this task.​3. Download TWRP (on your computer).
3.1 Follow the instructions from the official page. In short, put the img into the ADB folder.​4. Follow the commands in the the tutorial mentioned.
4.1 In short, unlock the bootloader, boot twrp, complete backup, reboot into the system, copy the backup to your PC/Cloud service, get back to fastboot mode, flash twrp, then flash your ROM.
OBS: Suggestion for only booting TWRP at the first time is perfectly optional, you can flash it since the beginning but in this case you wouldn't be able to backup the original recovery and everything as the phone came, in case you need go back to request an RMA.​
Click to expand...
Click to collapse
more questions....twrp will only load onto my phone and not my pc? also there are no adb driver folders just an exe. what do i do about that?
someone tell me how to delete this thread...i am just going to sell my smartphone i can't look at it anymore. every thing i try to do with it it resists every single inch of the way. nothing works according to instructions. i thought this would be fun but its hell... i give up! ...it wins going to trade this thing for the first 30 dollar burner phone i can find
Huge drama for nothing. Sell the thing, it's obviously not for you. If you can't follow some simple instructions, then it's better to sell it to some guy who likes to try at least.
valy_cta said:
Huge drama for nothing. Sell the thing, it's obviously not for you. If you can't follow some simple instructions, then it's better to sell it to some guy who likes to try at least.
Click to expand...
Click to collapse
maybe they are laid out to be simple but nothing is working as instructed. i have been at it for a week . so far installing firefox is the best i can seem to do lol simple? theres nothing simple about the gangbang of programs you need to do stuff on these phones. none of which can actually be compelled to function under any circumstances at least for me.
Serialjwalker said:
maybe they are laid out to be simple but nothing is working as instructed. i have been at it for a week . so far installing firefox is the best i can seem to do lol simple? theres nothing simple about the gangbang of programs you need to do stuff on these phones. none of which can actually be compelled to function under any circumstances at least for me.
Click to expand...
Click to collapse
If you are not familiar with giving commands with command prompt, installing drivers and needed software (android studio or minimal adb install) then you are in for a challenge, if you are not willing to learn its better to sell the phone or use it with de preinstalled android.
i find myself quite skilled( have flashed several brands of phoned in the last 5 years) and it took me a couple of days to figure out what to do and how to install twrp and my first rom, there are no one click shortcuts for this phone
Why need to install rom? It already work.
Serialjwalker said:
more questions....twrp will only load onto my phone and not my pc? also there are no adb driver folders just an exe. what do i do about that?
Click to expand...
Click to collapse
Did you try watching different videos to have a big picture of the process? It would be the first step. Even if you don't understand English, simply watch it. You'll see what would happen after each action.
Then check the written tutorial. Not a big issue at all. Really. Even for newbies, I've been one when I had a Galaxy 5, my first android that doesn't even needed to flash a custom ROM.
Whether you think you can, whether you think you can't, you're right.
The command to load the TWRP will be done on your PC, however, only your phone will load it. In short, you'll be commanding your phone through your PC.
When you install Minimal ADB and Fastboot, it will install its files in a default folder. Inside its default folder is where you should place the TWRP image.
Sent from my Le X820 using Tapatalk

Categories

Resources