Hello,
I have a samsung big neo plus Model GT-I9060I according to theetic which is under battery and imei
mod edit: IMEI removed - for your own saftey, don't post identifying infos
And when I check in Imei.info I find that it is a GT-I9060
Now it remains blocking on the ignition logo and reappears
I have formatted with spflashtool and I wanted to flash it shows me this error "" BROM ERROR: S_DL_PMT_ERR_NO_SPACE (5069) "" now it does not turn on anymore
I have a lot of problems with this kind of error. "" BROM ERROR: S_DL_PMT_ERR_NO_SPACE (5069) "is the size of a file that is larger than the available
And the resolutions are:
1- Ensure that the file (s) you are trying to flash is actually for your exact phone model this is the case Try another stock ROM
(I have already tried more than 7 rom of the clone of my Samsung GTI9060I ca did not solve the problem)
2-Change the phone's emmc chip
(I do not know how to do this I need help for my fake Samsung GT-I9060I
I have already downloaded several versions of sp flash tool but my problem has not been solved I need you ... thanks .. while
Chip info (
Chip name: mt6572
Chip version: 0x0000ca00
Ext Clock: EXT_26M
Extern Ram Type: DRAM
Extern Ram Size: 0x20000000
SRAM Size: 0x00020000) and even now my samsung is off
Related
Whenever I use SP_Flash_Tools v3.xx on my HDC Note, I received the following error messages ..
1 Error message – BROM ERROR : S_UNSUPPORTED_VER_OF_DA (1022)
[DA] DA binary file contains an unsupported version in its header!
2 ‘Cannot initializes scatter file. Please check the name is legal’.
The above messages appears on different version of the SPFlash Tools.
What went wrong?
I flashed a wrong rom, and now have phone N9006 mtk 6572 bricked, it gives this error now , dont turn on and connection takes few second,,
it gives this error now
Flash files count is :12
Action : Firmware update.
Selected Samsung Clone: Note 3 Clone(MT6572)
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM21)
Phone detected...Please wait
Sending DA agent, please wait...
Connect error: S_FT_ENABLE_DRAM_FAIL
Error connect phone, aborting.
All done.
I didnt make backup my fault, before that I read the info of phone which was stuck at logo, the info read via volcano box is this, can some one give a backup or any rom to at least revive this phone,
Version: V3.8
SN:xxxxxxxxxxx
Port:COM57
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM1 COM3 COM8 COM9 COM57
Current Port:COM57
Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6572
Hardware version:CA01
Software version:0000
Boot downloading complete!
EMMC_ID:0x45010053454D3034472805A6827A513B
EMMC_PRODUCT_NAME: SAMSUNG :0x53454D303447
EMMC_BOOT1_SIZE: 0x00200000
EMMC_BOOT2_SIZE: 0x00200000
EMMC_PRMB_SIZE: 0x00200000
EMMC_GP1_SIZE: 0x00000000
EMMC_GP2_SIZE: 0x00000000
EMMC_GP3_SIZE: 0x00000000
EMMC_GP4_SIZE: 0x00000000
EMMC_USER_SIZE: 0x0EC000000(3.69 G)
Analysis of system files...
PRELOADER: addr:0x000000 --length:0x880000
MBR: addr:0x880000 --length:0x080000
EBR1: addr:0x900000 --length:0x080000
PRO_INFO: addr:0x980000 --length:0x300000
NVRAM: addr:0xC80000 --length:0x500000
PROTECT_F: addr:0x1180000 --length:0xA00000
PROTECT_S: addr:0x1B80000 --length:0xA00000
SECCFG: addr:0x2580000 --length:0x020000
UBOOT: addr:0x25A0000 --length:0x060000
BOOTIMG: addr:0x2600000 --length:0x600000
RECOVERY: addr:0x2C00000 --length:0x600000
SEC_RO: addr:0x3200000 --length:0x040000
MISC: addr:0x3240000 --length:0x080000
LOGO: addr:0x32C0000 --length:0x300000
EXPDB: addr:0x35C0000 --length:0xA00000
ANDROID: addr:0x3FC0000 --length:0x28A00000
CACHE: addr:0x2C9C0000 --length:0x17800000
USRDATA: addr:0x441C0000 --length:0x52C00000
FAT: addr:0x96DC0000 --length:0x54340000
BMTPOOL: addr:0xFFFF00A8 --length:0x000000
Format addr:0x481C0000 --Format length:0x4EC00000
>>Read phone information success.
these are the info , so please can some one help me urgently thankyou.
bcnboy
Dear Forum users, please help me with this issue that i have :
I was using this file : pan.baidu.com/s/1ntnI5gH
Now i managed to get into Droidboot,
I am getting errors like :
Result : FAIL(Partition)
ERASE FAILED!
RESULT: FAIL (unable to format)
Result : FAIL(flash_cmds error!)
Thanks.
Hi experts!
Few days ago i rooted my QTab v7 MT6580 using kingroot, then i tried to replace it using super sume. After that my tab stuck on boot loop. I flashed it using sp flash tools but problem was still. Then i used "Format all + download" method after that it didnt get on.. No vibration no charging animation nothing else.. But it still connects with my system and i can flash it again but all invain plz help plzz em not an expert plz help me
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
Device Id = "Unnamed Flash" (83)
Size = 0x200000000 (8192MB/65536Mb)
EMMC:
ERROR: EMMC was not detected!
UFS:
ERROR: UFS was not detected!
edit: should have put 'i get a' before error code lol.
model: pixi 3 3.5.
the current tutorial for rooting this phone in 2016 doesn't work anymore.
the full error code is:
S_SECURITY_SERCURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), ,MS ERROE CODE: 0X00