USB 3.0 - No MTP connection (charge only) - Verizon LG V10

Any one know how to fix this? or why it won't detect the device on USB 3.0?
USB 2.0 seems to detect and I can copy pictures onto my computer, but I can not copy or cut them from one spot on the SD card to another through the windows OS. i.e. trying to move pictures from the 'camera' folder to a different folder on the phone's SD card.
Thanks!
Aloha.

Troubleshoot;
LG drivers installed
Does the cable support what you're wanting to do(try another USB )
Under developer settings make sure USB debugging is turned off.
These were the first things I checked when I had the same issue and just changed everything ?
Hope this helps.

kaluna00 said:
Any one know how to fix this? or why it won't detect the device on USB 3.0?
USB 2.0 seems to detect and I can copy pictures onto my computer, but I can not copy or cut them from one spot on the SD card to another through the windows OS. i.e. trying to move pictures from the 'camera' folder to a different folder on the phone's SD card.
Thanks!
Aloha.
Click to expand...
Click to collapse
ive ran into this a lot, its usually the usb cord

thank you both. I wish I could try to fix this right now. My V10 just gave me the boot loop of death. I've tried everything. it's toast. going to be putting in for a new one on Monday. (tear).

I was going to suggest.. Activating "Developer Options" in system settings, go to USB and click choosing MTP or whatever. I noticed most newer ROM versions have this annoying issue, mine never stays after a reboot either...

Related

How do I remount the SD?

When I plug my Atrix into a device (computer, car, etc) via USB, the SD card auto-mounts. I would like to be able to adjust when it mounts but the auto-mount isn't a huge problem. My issue is that when I unplug the phone from a device the SD card doesn't automatically remount.
Is there a way to set up the SD card to automatically remount? Is there a manual way to remount besides restarting the phone?
thechump said:
When I plug my Atrix into a device (computer, car, etc) via USB, the SD card auto-mounts. I would like to be able to adjust when it mounts but the auto-mount isn't a huge problem. My issue is that when I unplug the phone from a device the SD card doesn't automatically remount.
Is there a way to set up the SD card to automatically remount? Is there a manual way to remount besides restarting the phone?
Click to expand...
Click to collapse
Did u try mounting in Settings --> SD card and storage
Yes, when I go to that menu it says, "Insert an SD card to mount". I'm not able to click "mount" because it is grayed out with the above message on it.
Any other ideas?
When u plug your phone in, there should be a USB icon @ the top of the screen. Pull that down, and select 'Do Nothing' that should clear up your problem. Always make sure you do this before unplugging your phone if it mounts the SDCard to avoid corrupting the data. Let me know if this fixed your problem.
I have the same exact issue. Selecting "None" for usb mode does nothing for me either. I have to reboot my phone just to get the SD Card and Internal storage to re-mount.
I don't know if this is related but I am also running ADEO ROM.
sstalder said:
I have the same exact issue. Selecting "None" for usb mode does nothing for me either. I have to reboot my phone just to get the SD Card and Internal storage to re-mount.
I don't know if this is related but I am also running ADEO ROM.
Click to expand...
Click to collapse
I'm rooted but running stock otherwise.
Selecting "none" just affects the phone's internal storage, not the SD card. Also, whenever i plug my phone into any device it automounts the SD, I'm never given an option. It is really frustrating when I just want to charge via USB and not mount my SD card.
Any other ideas? Is there an app that would solve this?
EDIT: I'm also having an issue where my PC won't let me "eject" the internal storage of the phone or the storage on the SD (drives F and G) so I have no choice but to just unplug it.
I should add that with my case my phone unmounts internal storage AND the sd card. It's to the point to where I am using adbWireless in order to push or run any other commands needed for adb.
sstalder said:
I should add that with my case my phone unmounts internal storage AND the sd card. It's to the point to where I am using adbWireless in order to push or run any other commands needed for adb.
Click to expand...
Click to collapse
Yeah you and I are having the exact same problems. This is really aggravating. However, I might have found a solution. In the app switchpro, you can set one of the controls (icons) to be "media remount". I have had soem limited success with it. Try it out yourself and let me know if it fixes the problem.
Thanks
I'm having the same problem. I downloaded the SwitchPro app and used the toggle mount/unmout successfully, so i don't have to restart the phone. It's a shame I had to buy an app to fix a problem with a new phone. I believe the first day of owning the phone I may have unplugged from the cpu while in media link mode for the usb connection, but since then I have it set to "none".
I am not rooted, nor am I running adeo rom as mentioned above.
Sam1geois said:
I'm having the same problem. I downloaded the SwitchPro app and used the toggle mount/unmout successfully, so i don't have to restart the phone. It's a shame I had to buy an app to fix a problem with a new phone. I believe the first day of owning the phone I may have unplugged from the cpu while in media link mode for the usb connection, but since then I have it set to "none".
I am not rooted, nor am I running adeo rom as mentioned above.
Click to expand...
Click to collapse
OK I'm glad we've found a fix of sorts at least.
That reload media widget works for my music player. Unfortunately, my widgets (dependent on teh SD card for skins) don't reload properly liek the rest of my media does. I'm still stuck powering on and powering off every time i unplug from a device.
SD Card problem
I think I have the opposite problem. I just rooted using aRoot. Now, when plugging the phone into my computer using a USB cable, the phone says the SD card is ready to be removed. And the Media Link can't read it either. Once I unplug the phone from the computer, the SD card is able to be used by the phone.
Any ideas?
jriverss said:
I think I have the opposite problem. I just rooted using aRoot. Now, when plugging the phone into my computer using a USB cable, the phone says the SD card is ready to be removed. And the Media Link can't read it either. Once I unplug the phone from the computer, the SD card is able to be used by the phone.
Any ideas?
Click to expand...
Click to collapse
My problems started after I used aRoot as well. Unfortunately, I never really found a solutions. I've just been restarting my phone whenever i plug it in. In your case, have you tried switching it into mass storage mode after plugging it in?
thechump said:
My problems started after I used aRoot as well. Unfortunately, I never really found a solutions. I've just been restarting my phone whenever i plug it in. In your case, have you tried switching it into mass storage mode after plugging it in?
Click to expand...
Click to collapse
I've tried every setting with no luck. All I wanted to do is add some music to my SD card. So I ended up taking the card out of the phone and inserting it directly into my computer in order to add the music. Not the best solution to the problem.
No definitely not. At least the files get transferred faster that way

[Q] PC usb connection screen

I'm wondering how to switch between the different screens you see when you click on the USB icon in notification area when connected to PC. One has the android guy and an icon to turn on or off USB storage and the other has the three choices where you pick between charge only htc sync and disk drive, and then click done. I noticed with different roms i get a different one but want to use the one i like, is there a way to do this? thankyou
I don't believe you can. I would say it's based on the software version of the ROM your running.
junny101 said:
I'm wondering how to switch between the different screens you see when you click on the USB icon in notification area when connected to PC. One has the android guy and an icon to turn on or off USB storage and the other has the three choices where you pick between charge only htc sync and disk drive, and then click done. I noticed with different roms i get a different one but want to use the one i like, is there a way to do this? thankyou
Click to expand...
Click to collapse
Only HTC STOCK based ROMs such as the original Eris ROM, xtrSENSE, xtrROM, and other similar ROMs have the one including HTC Sync as an option.
I have no idea if you can change the look of the screen, or how to go about it if you can.
I don't even use the traditional method of mounting the SD card anymore. For many months I've been using, first a widget called SD Share/Dual Mount SD which allows you to mount the SD card to the computer without dismounting it from the phone.
Then Multi Mount SD came along which has an option to automount the SD card to my PC whenever I connect the USB cable. Now I use this. It also has a widget but I don't need or use it since it automatically mounts and dismounts. Note if you reboot either the phone or computer while it's still connected you'll have to disconnect and reconnect it once one or both devices are rebooted before it'll automount again. At least with the current version.
SD Share/Dual Mount SD now apparently has this capability, too.
Also, Windows and Linux programs like QtADB (recommended) and Android Commander (I never personally got it working but I know other people did) allow you to access the system areas of your phone PLUS your SD card through a Windows GUI without mounting the SD card in the usual way. It does this because deep down it uses ADB for everything. I think it comes with the components it requires though, so I don't think you need to install the complete Android SDK though. I don't know for sure since I have the SDK installed anyway.

[Q] Help - USB question under Cyanogen 7

I am a complete noob when it comes to Android, having first got my G-Tab yesterday. I'll give some background before I get to my question.
Yesterday, I sideloaded a couple of apps by essentially copyng them over to the root directory on the G Tab. But, like most others, I found the stock OS very slow and unresponsive. So I installed CyanogenMod 7 as per some simplified directions that I found. Everything went fine. That's not the problem.
My problem is that I cannot sideload anymore. When I plug in my G-Tab through the USB, I hear the Windows two thumps, and nothing happens. I look to see if my tablet is showing up in the Winders Explorer, and it just shows a bunch of memory sticks that when I click on them, I can't access. Also, nothing is showing up on the tablet either (no dialog boxes like under the stock OS, nothing). This is a big problem for me since I don't have access to WIFI at the moment.
Does anyone know how I can make my computer and tablet see each other? If you tell me to do something, please tell me where to find it. For example, on another thread, someone advised someone else to turn on USB debugging for something, but I can't find any option for USB debugging in Cyanogenmod 7 under settings. Thanks in advance for any help you can provide.
Additional info:
Computer: Laptop running Windows Vista
Did you try swiping on the notification area and enabling USB transfer on the tablet?
If you don't do this, your computer will see the USB device but not as mass storage.
For example, on another thread, someone advised someone else to turn on USB debugging for something, but I can't find any option for USB debugging in Cyanogenmod 7 under settings. Thanks in advance for any help you can provide.
Click to expand...
Click to collapse
Here is where this is....
Menu >>Settings >> Applications >> Development. 1st choice, USB Debugging.
Thanks. I did swipe in the notification area, and the only notification there was that USB debugging was activated. But still the G Tablet and computer cannot see each other.
Double check in your device manager (PC) to make sure there are no issues with the drivers.
Thanks. I found it and also found out that it is turned on by default. So I guess that doesn't help.
pgonza02 said:
Double check in your device manager (PC) to make sure there are no issues with the drivers.
Click to expand...
Click to collapse
Does Cyanogenmod 7 require special drivers? The drivers worked fine on the stock build, and nothing changed since then. Everything looks ok.
I plugged my Gtablet (CM7.02 with Pershoots 4/30/11 kernel) in to my computer just now to test. I haven't used it on this computer since installing CM7. I did just work on my boss's Gtablet the other day running both stock TapnTap and VEGAn 5.1.1 and it worked fine on his.
I plugged in the tablet, Windows 7 (32bit) said it was installing drivers, driver install completed successfully.
On my tablet I then swiped up the notification bar and tapped on the selection that said "tap here to mount USB to share files with your computer" (or something like that). The Android mascot screen popped up and I tapped "Turn on USB".
New drive opened up on my computer that was the gtablets /sdcard.
So it works and used the same driver as before.
No special drivers for CM7.
One nice thing about CM7 (or maybe Ginger) is that now when plugging in you get access to both the internal and external SD cards from PC.
tcrews said:
I plugged in the tablet, Windows 7 (32bit) said it was installing drivers, driver install completed successfully.
On my tablet I then swiped up the notification bar and tapped on the selection that said "tap here to mount USB to share files with your computer" (or something like that). The Android mascot screen popped up and I tapped "Turn on USB".
New drive opened up on my computer that was the gtablets /sdcard.
So it works and used the same driver as before.
Click to expand...
Click to collapse
My computer Vista (32 bit) at no point said it was installing drivers after I upgraded to Cyanogenmod 7.
When I swipe the notification area (and I assume that the notification area is the area at the top of the tablet's screen), I get a menu that tells me that USB debugging is activated and that's all. No option to mount USB. And no screens popped up to ask to turn on USB. None of this.
And when I plug in the USB, as I mentioned, I get the two tones from Windows, and 3 new removable disk drives appear. But when I click on each, I get am asked to insert a new disk.
That's all the info I have at the moment.
At this point, I'm so sick of it. I think that probably somewhere a switch is not flipped or a box is not checked, but I have no idea where that could be. I'm seriously considering using ClockWork mod to restore the system. But I'm loathed to do this since I spent 2 hrs. downloading Cyanogen Mod last night (I have a slow internet connection).
I would suggest that you turn off "USB debugging". That setting exists to activate adbd on the tablet, and normal users, usually, never need it. Enable "USB debugging" only if you need to use adb.
After disabling USB debugging, reboot the tablet, and then connect the USB cable to the mini-USB slot on the gTablet. As soon as you do that, on CM7, a USB Mass Storage screen with a green Android will pop-up with a message saying "USB connected" and button to "Turn on USB Storage".
Click the button and a warning that "If you turn on USB storage, some application you are using will stop and may be unavailable until you turn off USB storage.", will appear. Select OK. The green Android will now turn orange and the screen will say "USB storage in use".
Use the "Turn off USB storage" when you're ready to wrap up.
Ok. I think I might have solved the problem, but some intervening events makes me not sure. Basically, I restored to factory and then put in a different ROM, VEGan7. However, while doing this, I think I might have found the solution to my original problem.
It turns out that it does seem to be a problem with Windows, or at least with Vista. I had the same problem with VEGan7. But this time, I right-clicked on the "removeable disk" that appeared under "Computer" (where you see all your drives) when I hooked up the G TAB via USB. After I right-clicked, I selected properties and then clicked on the "Hardware" tab. You will see a list of all possible storage devices to associate with that icon. I chose the one containing the string "Tegra2" and I was off to the races. I was then able to perform the actions mentioned above about activating the USB on the G Tab.
I suspect I could have used this technique with Cyanogen 7. The only thing that I question is that I saw 3 removeable disk drives appear and not just one. I hope this helps someone else who might run into the same problem.
JowBe said:
The only thing that I question is that I saw 3 removeable disk drives appear and not just one. I hope this helps someone else who might run into the same problem.
Click to expand...
Click to collapse
Did you by any chance have an external micro SD card on the tablet?
If so, I'm thinking that you saw the 2 SD cards + the APX debug mode device.
flash this zip (in post #3) to mount the internal storage as an SDcard instead of EMMC. If you run that then you should be able to mount the storage when running CM7
http://forum.cyanogenmod.com/topic/20913-cyanogen-7-viewsonic-g-tab-usb-connection/
also your other option is to boot into Clockwork recovery then go to mounts/storage and mount usb
you should then be able to transfer files back and forth
davidukfl said:
flash this zip (in post #3) to mount the internal storage as an SDcard instead of EMMC. If you run that then you should be able to mount the storage when running CM7
http://forum.cyanogenmod.com/topic/20913-cyanogen-7-viewsonic-g-tab-usb-connection/
also your other option is to boot into Clockwork recovery then go to mounts/storage and mount usb
you should then be able to transfer files back and forth
Click to expand...
Click to collapse
Beat me to it
My post on "the other side"
pgonza02 said:
Did you by any chance have an external micro SD card on the tablet?
If so, I'm thinking that you saw the 2 SD cards + the APX debug mode device.
Click to expand...
Click to collapse
No, just got the tablet. Didn't have time to fool with external Micro SDs.
davidukfl said:
flash this zip (in post #3) to mount the internal storage as an SDcard instead of EMMC. If you run that then you should be able to mount the storage when running CM7
http://forum.cyanogenmod.com/topic/20913-cyanogen-7-viewsonic-g-tab-usb-connection/
also your other option is to boot into Clockwork recovery then go to mounts/storage and mount usb
you should then be able to transfer files back and forth
Click to expand...
Click to collapse
Thanks, I'll give it a try. What are the ramifications of mounting the internal storage as an SD card instead of EMMC? Do I lose performance? I mean, there must be a reason that the default is EMMC.
I wouldn't want to boot into Clockwork every time I want to transfer something, apps or even music and videos. That would be a real pain. Actually, I was surprised at how long this tablet takes to boot up after a complete shut down.
JowBe said:
Thanks, I'll give it a try. What are the ramifications of mounting the internal storage as an SD card instead of EMMC? Do I lose performance? I mean, there must be a reason that the default is EMMC.
Click to expand...
Click to collapse
From what I have read that's the way that Gingerbread does it. Some programs actually have problems with that configuration, that's why people do this.
davidukfl said:
flash this zip (in post #3) to mount the internal storage as an SDcard instead of EMMC. If you run that then you should be able to mount the storage when running CM7
http://forum.cyanogenmod.com/topic/20913-cyanogen-7-viewsonic-g-tab-usb-connection/
also your other option is to boot into Clockwork recovery then go to mounts/storage and mount usb
you should then be able to transfer files back and forth
Click to expand...
Click to collapse
Do you think you might post the file here. When I go to that link I'm not allowed to download it. The irony is that that link says it came from here but I've used the search and I can't find it here. Maybe it is just day after Cinco de Mayo problems I'm having?

[Q] CM9 4.5.1 Atrix 4G SDCard issue

I am running CM9 4.5.1 with GApps v12 on an Atrix 4G. The issue I am having is that when I connect via USB cable to my XP system, my PC detects the two sdcards (internal and external) but I can not access either one of them..."Please insert disk into drive" like they are not formatted.
I did find that the external sdcard is now being seen in the phone as folder EMMC and both of them have data so I don't think it is a format issue.
I have tried to connect via USB using the MTP and Mass Storage Option and rebooted the phone both times after the change was made. Neither attempt worked.
I have searched through the forum as best I could but with the CM9 thread pushing 1000 pages, I'm not sure if anyone has come across this. If so, what was done or are there any suggestions out there? Thanks.
Never mind, I figured it out after installing new USB drivers from Moto and trying everything else. Found out it was a simple/stupid oversight on my part. So if this happens to anyone else....
Even though I had Mass Storage enabled in the settings, when I connected the phone via USB to my XP Pro Pc, I had to pull down the notification bar, select USB storage, and turn it ON. I guess by default it is turned off. Once that was done, I am now able to access the sdcards on my PC.
I did find during all of the research and trial/error that the sdcard-ext is now the sdcard and the sdcard is now emmc in the folders. I believe there is a way to change this (xda thread) but I can live with the way it is.

USB Mass storage?

How do I enable USB Mass storage mode instead of the stupid MTP og PTP?
Regards,
BTJ
Not sure if this works for the SGS3 but it worked for the SGS2:
Bring up Settings.
Click More… (under Wireless and network).
Then select USB utilities ~ Set USB cable connection mode.
Select Connect storage to PC then.
Connect USB cable from phone to PC.
Select Turn on USB storage.
That’s all.
Sorry, no such settings in SGS3, we are stuch with MTP or PTP... Don't understand the logic behind removing USB Mass storage mode!! Both MTP and PTP are slow as hell and there is no support for S3 in libmtp at the moment to make matters worse... If I had known this, I would have reconsidered my choice of buying a SGS3.....
BTJ
Like the Nexus, /sdcard is mounted at /data/media (IIRC, mount point could be different), meaning that internal data and the internal sdcard space share the space, rather than being split. UMS removes access to the device that is mounted from the phone, so it cannot be used when the sdcard is shared in this fashion.
I thought libmtp worked? I've been using adb and a GUI for shifting lots of files, qtadb
Sent from my Galaxy Nexus using Tapatalk 2
Seems to be a problem with both SII and SIII... But I will check out qtadb, thx...
BTJ
So am I reading this right. You can't plug a USB cable in, the SD card appears then in explorer?
I have a sensation XE at moment and use this a lot for transferring files at work/home etc.
So can I not access my files normally now that I copy to SD card, eg docs etc?
Nope... But it sounds like you are using Windows so then MTP will work, kind of like you are used to...
BTJ
The idea about using MTP is it allows you to continue to use your phone without disruption, loading Mass Storage un-mounts the sd from your phone.
However I do think we should still be given a choice
Yes, I guess I understand the idea... What I don't understand is why they have removed the choice we used to have.... :-|
BTJ
I stil don't have an S3, but am a little confused on the MTP etc. Also I use a Mac and a Windows PC.
So when you plug in an S3 on a Windows PC, what does it do in MTP mode? just still allow you to drag/drop files? does the S3 come up as another drive or something in explore?
Also anyone with a Mac, how does this work?
cheers
This might give us some insight on why no USB Storage.
http://www.androidpolice.com/2011/1...behind-galaxy-nexus-lack-of-usb-mass-storage/
fylim said:
This might give us some insight on why no USB Storage.
http://www.androidpolice.com/2011/1...behind-galaxy-nexus-lack-of-usb-mass-storage/
Click to expand...
Click to collapse
I think I got the jist of that article lol but does this mean android developement were looking for devices to have either internal storage or sd storage but because the SG3 has both its sort of screwed things up a bit?
So UMS might be released in a later patch to allow easier access to added SD storage? Or does the current setting allow access to both storage thru windows pc?
Soz if I come across as a noob I havent got sg3 yet but planning to get one in a few weeks for upgrade and Ive been trying to get the low down on positives and negatives before I get the phone
Keep things simple!
Please can someone answer this simply.
Can I plug in the device into my mac/pc and just transfer any file to the micro SD card whilst it is in the phone?
All I want to do is to be able to put avi files on it as samsung kies or doubletwist doesn't seem to suppor them...
A yes or a no with and explanation would be great ta!!
pow001 said:
Please can someone answer this simply.
Can I plug in the device into my mac/pc and just transfer any file to the micro SD card whilst it is in the phone?
All I want to do is to be able to put avi files on it as samsung kies or doubletwist doesn't seem to suppor them...
A yes or a no with and explanation would be great ta!!
Click to expand...
Click to collapse
yes you can easily do that. No issues in that. Simply treat it as a normal pendrive in such a case.
sorted!
toxicthunder said:
yes you can easily do that. No issues in that. Simply treat it as a normal pendrive in such a case.
Click to expand...
Click to collapse
Thanks for the help. Although I figure out what everyone was talking about.
This is how I did it (maybe this will help others noobs as well):
You will need the 'Android File Transfer program' --> google search it!
1.Connect phone to PC (you will see usb icon at the top of the screen)
2. Pull down the notification centre.
3. Touch the usb thing.
4. Click PTP mode
5. Open the file transfer program
BOOM! Rock on nerds!

Categories

Resources