Related
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Turn off the phone --> Run minimal ABD and fastboot as admin--> just write the command for recovery install (don't hit enter yet)--> press volume + and volume - button and connect the phone to pc via usb--> now hit enter and voila. Your phone will boot in recovery.
Click to expand...
Click to collapse
Good luck!
anyone?
f4780y said:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Good luck!
Click to expand...
Click to collapse
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
hientran41 said:
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
Click to expand...
Click to collapse
OK, but did you look at the second link there, to the specific post in that thread? It suggests a process for locked bootloader, which is why I thought it might help...
Anyhoo, I hope you manage to get it fixed somehow!
Is anybody have the droidboot.img file from the VibeZ K910 dualsim, pls upload it for me. i cannot find it anywhere.
I look into the second link as well. that method for user have a working phone but locked bootloader and want to downgrade.
Ah, OK. Sorry I couldn't help.
u fix your phone?
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
hi do u fix your phone?
Geguniukas said:
hi do u fix your phone?
Click to expand...
Click to collapse
i bricked also
dunno what to do..
---------- Post added at 12:13 AM ---------- Previous post was at 12:13 AM ----------
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
did you fixed the phone?
lenovo k910e 4.2.2 bricked after TWRP for 4.4.2 installation
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Solution ( k910 bricked )
Ok here is the solution even if your device ( k910 dual sim ) is completely bricked as was mine.
I was stuck in Lenovo logo with no success in finding right and working drivers ( windows 7 64x ) and i was not able to to get in recovery official ...everything was just - somehow - deleted...
I had locked bootloader **** and was not be able to flash cmw in working mode ****
There was nothing for me that could recover my phone even if the "hard" way with QPST or miflash etc
So....after 3 days....find this solution and hope this will help you because it is soooooooooo easy finally!
Steps:
1) Download lenovo driver ( i think it is useless in fact but ok....just run it you dont have anything more to loose )
https://www.dropbox.com/s/frbpz16udrefoit/LenovoUsbDriver_autorun_1.0.112.exe?dl=0
2a) Download and install Minimal adb
https://www.dropbox.com/s/uvngsu4vz4hvsky/minimal_adb_fastboot_v1.1.3_setup.exe?dl=0
So now you have to use the right recovery image ( this file has to be inside minimal adb folder )....so here it is:
https://www.dropbox.com/s/ge05m1fe8n4qgb1/recovery.img?dl=0
2b)
Download this ROM ( this worked for me - with other i did try i did get an error )
http://www.needrom.com/download/lenovo-k910-vibeui-2-0/
prefer the last updated version ( 1501 )
Put this rom in the same ADB folder and renale zip in VIBE1411.ZIP ( in order to be easier later )
3) Turn off the device open Adb and write : fastboot boot recovery.img ( to have it ready )
4) Push volume + $ volume - at the same time and AFTER connect with usb to your pc - At the time the device will vibrate HIT ENTER in ADB
This will flash the recovery and after 1 minute device will open in a recovery screen with an adb update option ***
SELECT THIS adb update OPTION !
Your device kow it is ready to flash the new rom ! ( you will realize that everything is right from many usb beeps you will hear )
5)In adb console write : adb sideload VIBE1411.ZIP
This will take a little ....after that your device will reboot ! Dont panic if for a few minutes it will stuck in lenovo logo....
IT IS NORMAL AND YOU HAVE TO WAIT!
Hope this will help you.....please feel free to tell me if this worked for you.
C u
Same thing happens to my lenovo vibe z k910
buzzbuzz1 said:
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Click to expand...
Click to collapse
After running twrp recovery it operates 3-4 times but now it flashes on twrp screen and screen goes blank and again flashes . I am unable to on it and as it shows only light and lenovo logo after that blank screen . Please help me in this. Its only detecting in adb recovery not any other mode.
lenove vibe Z k910 locked and stuck in logo
hello all
I ve done every word and many other tutorials but still the problem the same:
adb devices give just nothing
but fastboot devices gives the device
the driver is installed correctly detected in devices of the computer
here is the response for :fastboot boot recovery.img:
~/Desktop/lenovo]$ fastboot boot recovery.img (master✱)
< waiting for device >
downloading 'boot.img'...
OKAY [ 0.536s]
booting...
FAILED (remote: Locked)
finished. total time: 0.538s
thanks for everyone to help
Boot into recovery under bricked condition
Today I bricked K910 after reinstalling GMS apk.
The phone hanged at boot logo.
Nothing can be from here.
I decided to take this risk.
I removed the back cover and disconnected the battery terminal.
After that I plugged back the terminal.
Several tries by power button and volume down to get into the recovery mode. All failed.
Each time it hanged at boot logo.
I have to redo the battery terminal unplug sequence again.
This is correct method to get into recovery mode.
Press power button and volume down till the Lenovo logo appears.
Move the power button finger to the position of the " Home " of the touchscreen position.
Hold till the recovery menu appears. Choose factory reset to erase the phone.
There was two lit small icon below. Make your choice.
The phone will be erased by reset.
Reboot after the process.
I solved my phone bricked problem.
Hope the method will solve your problem.
Good day to all K910 users.
my vibe z cannot access the recovery mode (PWR + VLM DOWN), it only vibrate. If turn on only stuck at Logo. Please help .
guys recently I hard bricked my phone after installing lenovo lollipoprom.I also installed cwm through pc but not opened recovery. Thank to ed300 for providing custom recovery for lollipop I unbricked in very simple way
This will work for you if u are not able to enter into recovery
First install minimal adb and fastboot on your PC
Then connect your phone
Then transfer img file to adb and fastboot folder
Then open command window by right clicking and shift at same time
Disconnect ur phone type fastboot flash recovery 'img file name'
Waiting for device will be seen on CMD
Then enter into fastboot mode and then connect ur phone to PC
It will automatically start installing recovery
Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?
How to enter into fastboot mod
please tell me.
jatin vekariya said:
How to enter into fastboot mod
please tell me.
Click to expand...
Click to collapse
Dude seriously..???!!!
I asked you if you could enter in recovery or fastboo mode, and you said no, my phone just vibrates. If you didn't knew how to boot into fastboot you should've asked me right away.
Btw, here are the different key combos:
1) Recovery - Press VOL UP + VOL DOWN + POWER KEY and release POWER KEY once the lenovo logo shows up.
2) Fastboot - VOL DOWN + POWER KEY
3) Download Mode - VOL UP + POWER KEY
Multiple brick solution threads already exist, please search before posting your own.
Thread closed:
http://forum.xda-developers.com/lenovo-a6000/help/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
http://forum.xda-developers.com/lenovo-a6000/help/recovery-lost-t3395356/post67247279#post67247279
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Edit :-
Thank you all , i managed to unbtick using test point .!!
I know enough to tell you that I'd you can get fastboot yo work, its not bricked. Honestly I don't own the device. I own lg g3. And it might be different for this device but you can try pushing recovery from fasyboot mode using your PC. You might wanna google how to tbh and ask around ppl with similar device if possible. Pushing through fastboot/adb is most common so pushing recovery will format recovery partition and install/push new one. That will get you working recovery. (I hope). Happy flashing.
In fastboot check if bootloader is locked by running the device info command... It is not locked you have hopes... Use fastboot to flash fastboot rom package with modified emmc file and modded image...
Its locked
Only way is to do test point method or take it to a service center
#BATMAN# said:
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Click to expand...
Click to collapse
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Luiggi79 said:
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Click to expand...
Click to collapse
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
faced the same problem bro better give it in care if dnt wnt to give it to care just go to( http://en.miui.com/thread-235865-1-1.html ) or try ( http://xiaomitips.com/guide/fix-bricked-redmi-note-3-no-unlock-permission/ ) this if all didnt work go to care bro
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Luiggi79 said:
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Click to expand...
Click to collapse
im trying now! hopefully it will work :good::good:
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Stuck at mi logo
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
avrrv3689 said:
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
Click to expand...
Click to collapse
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
avrrv3689 said:
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
Click to expand...
Click to collapse
Read these carefully #DO AT YOUR OWN RISK#
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-instruction-unlock-bootloader-t3355904
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
http://forum.xda-developers.com/redmi-note-3/how-to/redmi-note3-prokenzo-guiderom-global-t3341102
:good: hit thanks if i helped you :good:
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
akhil17kr said:
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
Click to expand...
Click to collapse
Yes i think you can but im not 100% sure :good::good:
#BATMAN# said:
Yes i think you can but im not 100% sure :good::good:
Click to expand...
Click to collapse
Oh Lol , have asked many people but none of them are sure about this .. but i have asked from mi chat they said once bootloader is unlocked you can't lock it back by flashing MIUI roms as it's security feature . SO we can say unofficial method is problem if you like to switch to between ROM's but official one will not create any problems ..still not sure though have to ask who have done through Official method.
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
#BATMAN# said:
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Luiggi79 said:
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Click to expand...
Click to collapse
didn't work for me !:crying::crying:
I was using Unofficial Cm13 (kenzo optimized) rom, then I decided to go to miui8 global stable. So, I flashed MIUI8 .zip file using alka twrp.
But after flashing it, my phone didn't boot into system. Mi logo flashed twice with vibration, and that's it. Now I can only go to fastboot mode only.
And when I try to flash fastboot rom using mi suit, it says, " try to connect in normal mode first, then switch.
Please help.!!
Hello, sometimes after installing the new rom the phone slowing on first boot.. try to get on recovery again and then do all format. after this flash the rom. The best way to flash the rom secure is to try fastboost method!!
feikacab said:
Hello, sometimes after installing the new rom the phone slowing on first boot.. try to get on recovery again and then do all format. after this flash the rom. The best way to flash the rom secure is to try fastboost method!!
Click to expand...
Click to collapse
Actually, I am unable to get on to recovery. When I press power+ volume up button, it vibrates, mi logo appears for a second, and then it goes and what is left now is blinking red led light. Also, If I boot into fastboot, and and connect my phone suing usb, The mi pc Suits says, "try to connect in normal mode first, then switch"
shivamg95 said:
Actually, I am unable to get on to recovery. When I press power+ volume up button, it vibrates, mi logo appears for a second, and then it goes and what is left now is blinking red led light. Also, If I boot into fastboot, and and connect my phone suing usb, The mi pc Suits says, "try to connect in normal mode first, then switch"
Click to expand...
Click to collapse
try this http://en.miui.com/thread-235865-1-1.html
if i helped u, please press the thanks button
feikacab said:
try this http://en.miui.com/thread-235865-1-1.html
if i helped u, please press the thanks button
Click to expand...
Click to collapse
Thanks for the support. But I am unable to try this method. because the fastboot download speed is very low.
bro dont take any pressure...go to fstbot mode and check whether your bootloader is relocked or not..i am 99% sure its relocked..just unlock it and you are good to go
ruhul5 said:
bro dont take any pressure...go to fstbot mode and check whether your bootloader is relocked or not..i am 99% sure its relocked..just unlock it and you are good to go
Click to expand...
Click to collapse
yes , it is relocked. But I don't understrand, I have unlocked it with official method. How it can be relocked.?
shivamg95 said:
yes , it is relocked. But I don't understrand, I have unlocked it with official method. How it can be relocked.?
Click to expand...
Click to collapse
just again unlock with the same way you did it first time..means go to fastboot mode..connect the phone to pc..now login on miunlock tool in your pc and unlock...simple
ruhul5 said:
bro dont take any pressure...go to fstbot mode and check whether your bootloader is relocked or not..i am 99% sure its relocked..just unlock it and you are good to go
Click to expand...
Click to collapse
thank you so much.. It worked..
shivamg95 said:
I was using Unofficial Cm13 (kenzo optimized) rom, then I decided to go to miui8 global stable. So, I flashed MIUI8 .zip file using alka twrp.
But after flashing it, my phone didn't boot into system. Mi logo flashed twice with vibration, and that's it. Now I can only go to fastboot mode only.
And when I try to flash fastboot rom using mi suit, it says, " try to connect in normal mode first, then switch.
Please help.!!
Click to expand...
Click to collapse
I was having same situation too bro !!!
flash MIUI rom via MiFlash tool...
install ADB drivers ,
connect usb cable to laptop / pc...
then press both volume buttons at same time (+ and -) and at the same time while pressing keys , insert cable into ur mobile...
this will boot ur phone in EDL mode...
then by using MiFlash tool , flash rom and reboot
I flashed MIUI global 7.1.8 , it worked for me !
rasik107 said:
I was having same situation too bro !!!
flash MIUI rom via MiFlash tool...
install ADB drivers ,
connect usb cable to laptop / pc...
then press both volume buttons at same time (+ and -) and at the same time while pressing keys , insert cable into ur mobile...
this will boot ur phone in EDL mode...
then by using MiFlash tool , flash rom and reboot
I flashed MIUI global 7.1.8 , it worked for me !
Click to expand...
Click to collapse
u dont need to do all these again...just unlock the bootloader and reboot the phone..problem solve
ruhul5 said:
u dont need to do all these again...just unlock the bootloader and reboot the phone..problem solve
Click to expand...
Click to collapse
Ok...
Bro, I'm on official Resurrection Remix based on cm13.
So, if i need to go back to miui 8 (recovery rom of 1.19 gb) i need to
1. Flash miui 8 recovery rom through alka twrp.
2. Boot into fastboot mode.
3. Unlock using mi unlock tool.
4. Switch on my phone (and now its in miui 8)
Am i correct?
Hello everyone,
recently I've been having problems with latest marshmallow update so I wanted to downgrade to lollipop and I followed this thread
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
I installed the rollback package all went just fine and then by mistake I installed BETA UPDATES ANDROID MARSHMALLOW 6.0 ( I know how stupid this sounds :crying: )
now my device is not showing any sings of booting because the huawei logo isn't showing anymore just black screen and sometimes it vibrates
so is there any hope of reviving my device ?
Thank you guys .
tHe_ImPrA said:
Hello everyone,
recently I've been having problems with latest marshmallow update so I wanted to downgrade to lollipop and I followed this thread
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
I installed the rollback package all went just fine and then by mistake I installed BETA UPDATES ANDROID MARSHMALLOW 6.0 ( I know how stupid this sounds :crying: )
now my device is not showing any sings of booting because the huawei logo isn't showing anymore just black screen and sometimes it vibrates
so is there any hope of reviving my device ?
Thank you guys .
Click to expand...
Click to collapse
Have you tried getting into the bootloader?
Do you have twrp?
lionboy33 said:
Have you tried getting into the bootloader?
Do you have twrp?
Click to expand...
Click to collapse
No I don't have twrp and I don't know how to get to the bootloader on this phone (because it is my friend's phone not mine)
tHe_ImPrA said:
No I don't have twrp and I don't know how to get to the bootloader on this phone (because it is my friend's phone not mine)
Click to expand...
Click to collapse
Neither do I .. Try to do power + vol down or vol up
lionboy33 said:
Neither do I .. Try to do power + vol down or vol up
Click to expand...
Click to collapse
If I do get into the bootloader what should I do next ?
tHe_ImPrA said:
If I do get into the bootloader what should I do next ?
Click to expand...
Click to collapse
Use hisuite to reinstall the firmware
Or you can get into fastboot and flash it.
Sent from my PLK-L01 using Tapatalk
tried many combinations to get into the bootloader with no luck
only black screen with vibrations
First you should unlock bootloader, when you unlock bootloader, you can get into fastboot mode and flash system from that mode.
You can find on Huawei site how to unlock bootloader and get boot unlock code, when you do that then you can flash it with fastboot.
FInd Huawei Extractor Tool and extract BOOT.img, CUST.img, RECOVERY.img and SYSTEM.img from update.app which you want to flash. After that you can flash this files via fastboot. To enter into fastboot mode plug in usb and power on phone holding volume - and power button. After that go into adb folder, if you are using windows, copy files which you extracted into platform-tools and then do this commands.
Commands:
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
lakistrike95 said:
First you should unlock bootloader, when you unlock bootloader, you can get into fastboot mode and flash system from that mode.
You can find on Huawei site how to unlock bootloader and get boot unlock code, when you do that then you can flash it with fastboot.
FInd Huawei Extractor Tool and extract BOOT.img, CUST.img, RECOVERY.img and SYSTEM.img from update.app which you want to flash. After that you can flash this files via fastboot. To enter into fastboot mode plug in usb and power on phone holding volume - and power button. After that go into adb folder, if you are using windows, copy files which you extracted into platform-tools and then do this commands.
Commands:
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
Click to expand...
Click to collapse
But this will void the warranty, and its not his own device so that should be the last option
tHe_ImPrA said:
Hello everyone,
recently I've been having problems with latest marshmallow update so I wanted to downgrade to lollipop and I followed this thread
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
I installed the rollback package all went just fine and then by mistake I installed BETA UPDATES ANDROID MARSHMALLOW 6.0 ( I know how stupid this sounds :crying: )
now my device is not showing any sings of booting because the huawei logo isn't showing anymore just black screen and sometimes it vibrates
so is there any hope of reviving my device ?
Thank you guys .
Click to expand...
Click to collapse
Get a sd card, create a folder called "dload" without quotes.
Copy the file update.app from the latest B380 into the folder.
Have your phone turned off and press vol+- and power until the screen turns on. It should update.
tHe_ImPrA said:
Hello everyone,
recently I've been having problems with latest marshmallow update so I wanted to downgrade to lollipop and I followed this thread
http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
I installed the rollback package all went just fine and then by mistake I installed BETA UPDATES ANDROID MARSHMALLOW 6.0 ( I know how stupid this sounds :crying: )
now my device is not showing any sings of booting because the huawei logo isn't showing anymore just black screen and sometimes it vibrates
so is there any hope of reviving my device ?
Thank you guys .
Click to expand...
Click to collapse
If you can not enter fastboot mode (power + vol down or vol down and connect to pc) take it to Huawei customer service center.