Related
This is the method I discovered to root and install Custom ROMs on my Micromax A34..
I hope this will help you well...
There are 3 steps for your destination to root and install Custom ROMs on your Micromax A34..
Step 1> Root Your Model..
Step 2> Flash/Install Custom Recovery module for your Model..
Step 3> Flash/Install Custom ROM for your Model....
I am discussing all of these steps by this post here.. Please read carefully...
Step 1>>>> ( To Root Your Android Phone ) ( Any Android Phone is Supported For ROOT by this Method )
Components: A PC, Your Android phone, Your Original Data Cable, RootMaster.exe, Moborobo PC Suite..
A. Firstly Install Moborobo PC Suite from Here and install...(Download MOBOROBO PC SUITE
B. Then install Rootmaster from link given on file attached.. (Download ROOTMASTER from link given on file attached..)
C. Now connect your Android Mobile by Data Cable and make sure that Debugging mode is turned on from your handset..
( Debugging mode can be turned on from your mobile from Settings>Development or Settings>Applications>Development )
D. Make sure that your model is now detected by Moborobo PC Suite..
E. Now click on root button on Rootmaster (Make sure that your Model is now detected on Root Master )
F. That's all.. Your Phone is Now Rebooted..
YOUR PHONE IS NOW ROOTED AND YOU CAN CHECK YOUR PHONES ROOT STATUS FROM ROOT CHECKER APPLICATION...(Download ROOT CHECKER Apk here)
Step 2>>>> ( To Flash Custom Recovery Module on Your Phone (Micromax A34 only) )
Components: Mobile Uncle Tools, Recovery Module..
A. Firstly install Mobile Uncle Tools on your phone..(Download Mobile Uncle Tools By links on file attached below )
B. Then place the Recovery file on your sdcard.. (Download Recovery Module By links on file attached below )
(Don't place it in any subfolder. Otherwise it will not be detected)
C. Now open Mobile Uncle Tools and click on Recovery Update and then click on the file you havre loaded to your sdcard i.e recovery.img file..
D. Your phone is now restarted. and a white screen is displayed.. Dont afraid.. Your phone's Recovery is now replaced with Custom recovery Module..
E. Your phone will be auto Restarted..
( Recovery Module is now replaced )
Step 3>>>> ( To Flash/Install Custom ROM for your Model (Micromax A34) )
Components: Custom/Official ROM specially designed for your phone..
A. Download Custom ROM zip file from any source and place it on your sdcard.. Don't try to extract this zip file.. ( One Custom ROM for MICROMAX A34 is given here) (Download Now)
B. Open Mobile Uncle Tools on your phone..
C. Click on Update tool. And choose your flash file or Custom ROM downloaded from any source.. And click on next..
D. You can find that your phone's Software is changed to your new Custom ROM based software..
Links File:View attachment Links.txt
ENJOY>>>>>>>
IDEA GENERATED BY SKR
after flashing recovery via mbl uncl tools . my recovery is showing a white blank after doing so many reboots also
michel¥¥ said:
after flashing recovery via mbl uncl tools . my recovery is showing a white blank after doing so many reboots also
Click to expand...
Click to collapse
Yes. Thats happens to me also. Dont worry. Your recovery is working fine.
Do flash your custom rom with mobile uncle tool app. The link to download apk is available on links.txt file given with the post. Install that tool and try to flash rom by that.
Hi everyone,
This is what I have done to root my Teclast T8 with Magisk (based on this chineese forum: http://tieba.baidu.com/p/5449087481)
1-First download the official firmware from Needrom.com (You need to register): https://www.needrom.com/download/teclast-t8-e8c1/
2-Go to the Firmware folder and copy the “boot.img” file to the root directory of your tablet
3-Download and install MagiskManager on the tablet, click on Install, then choose to patch the boot image file. Choose the boot.img you’ve just uploaded to your tablet and it will start to automatically patch it.
Then go into the File Manager and go to the MagiskManager folder and find the “patch_boot.img“ and copy it to the root directory (without copying it to the root directory, you can not find the file from your pc…), then sends the file from the tablet to your computer.
4-For me the method with SP Flash Tool don’t work, because it says the scatter file is wrong (don’t know why…)
So i have to do it with adb and unlock the bootloader first:
-connect the tablet to pc, (first you have to enable OEM unlocking and USB debugging in Developer options)
-reboot the tablet in fastboot mode, hold buttons “power+Vol +” at startup, choose fastboot mode with Vol+ button, valid with Vol-
- open a command prompt in adb folder, then “fastboot devices”, then “fastboot oem unlock”, it should say “OKAY, finished”
Your bootloader is now unlock.
-then copy the “patched_boot.img” in the adb folder and tap in command prompt “fastboot flash boot patched_boot.img”, then “fastboot reboot”.
Your tablet should be rooted.
I think you can relock bootloader after... don't try yet.
PS: This is my first thread, so be indulgent ?
Don’t ask me technical questions because I am not a developer , just a simple user …
Hope this will help.
If someone find a way to find and flash a TWRP or how to install Xposed, please tell me, thx.
Rooted using same method but SP Flash Tools worked in my tablet.
Waiting for a TWRP ....
Yes, can confirm that method works for root.
Also tried the T10 TWRP and it's not working on the T8, just a black screen.
Don't need TWRP yet, some bugs in the ROM are more annoying than that
hi all
somebody tried the new rom v1.10 on needrom ??
marinero57 said:
hi all
somebody tried the new rom v1.10 on needrom ??
Click to expand...
Click to collapse
Hi guys i jus download v1.10 rom but have no idea how to flash, everything in chinesse... even recovery, how do you flash? the tablet have a TelcastOTA apk installed, this have a local update option allow to load firmware from sd, anyone used this app? what files should i put in SD?
thanks in advance
HI quick question what rom have u installed in ur T8, mine came with 1.01, i see in needrom have 3 versions: 1.06. 1.08, 1.10, have u updated to any of these?
Thanks
Polo19 said:
Hi everyone,
This is what I have done to root my Teclast T8 with Magisk (based on this chineese forum: http://tieba.baidu.com/p/5449087481)
1-First download the official firmware from Needrom.com (You need to register): https://www.needrom.com/download/teclast-t8-e8c1/
2-Go to the Firmware folder and copy the “boot.img” file to the root directory of your tablet
3-Download and install MagiskManager on the tablet, click on Install, then choose to patch the boot image file. Choose the boot.img you’ve just uploaded to your tablet and it will start to automatically patch it.
Then go into the File Manager and go to the MagiskManager folder and find the “patch_boot.img“ and copy it to the root directory (without copying it to the root directory, you can not find the file from your pc…), then sends the file from the tablet to your computer.
4-For me the method with SP Flash Tool don’t work, because it says the scatter file is wrong (don’t know why…)
So i have to do it with adb and unlock the bootloader first:
-connect the tablet to pc, (first you have to enable OEM unlocking and USB debugging in Developer options)
-reboot the tablet in fastboot mode, hold buttons “power+Vol +” at startup, choose fastboot mode with Vol+ button, valid with Vol-
- open a command prompt in adb folder, then “fastboot devices”, then “fastboot oem unlock”, it should say “OKAY, finished”
Your bootloader is now unlock.
-then copy the “patched_boot.img” in the adb folder and tap in command prompt “fastboot flash boot patched_boot.img”, then “fastboot reboot”.
Your tablet should be rooted.
I think you can relock bootloader after... don't try yet.
PS: This is my first thread, so be indulgent
Don’t ask me technical questions because I am not a developer , just a simple user …
Hope this will help.
If someone find a way to find and flash a TWRP or how to install Xposed, please tell me, thx.
Click to expand...
Click to collapse
Flashing ROM with SP flashtool - Teclast Master T8 (E8C1)
Fossxp13 said:
Hi guys i jus download v1.10 rom but have no idea how to flash, everything in chinesse... even recovery, how do you flash? the tablet have a TelcastOTA apk installed, this have a local update option allow to load firmware from sd, anyone used this app? what files should i put in SD?
thanks in advance
Click to expand...
Click to collapse
Hi! I haven't used in built update app so I'll try to explain how to update using flashtool. Follow the steps with your device disconnected from the pc and take into account your files will be erased.
First of all, I recommend you to install ADB and fastboot drivers: 15 seconds ADB Installer
As OP said download the rom from NeedRom and unzip it: You will have three folders:
升级工具, which contains flashtool
固件程序, with the rom
驱动程序, with the drivers
Rename all of them as flashtool, rom and drivers, for example. If you don't, you may have troubles launching flashtool or loading the scatter file.
Launch flashtool as administrator (升级程序, you could rename it too), if you get the message "The scatter file cannot found, please make sure the file exist before download" ignore it. In flashtool make sure MTK_AllInOne_DA.bin is selected as Download-Agent and select the scatter file inside rom folder as Scatter-loading file. Choose firmware upgrade from the list and click the Download button (the one with the green arrow).
Finally, switch off your device and connect it to your pc. Flashtool should do the rest, wait untill "Download Ok" message is displayed. Close flashtool, disconnect your device and switch it on.
IF your computer doesn't load needed drivers automatically, flashtool won't start the process as expected. You will need to open device manager on windows, right click on your device - update driver - choose manually - browse "inf" folder inside drivers folder (choose x86 or x64 according to your OS).
Hope it works! Good luck.
Prevent Brick and Xposed for Teclast Master T8 (E8C1)
Polo19 said:
OP
Click to expand...
Click to collapse
Hi Polo19!
Thanks for your post, I rooted my tablet following it! But since I encountered some issues in the process I wanted to share my experience.
IMPORTANT: For a few hours I thought I hard bricked my device, so I hope I could help somebody.
When patching boot.img with MagiskManager IF the app automatically tics "Keep force encryption" choose "Keep dm-verify" aswell!
I don't know why but this was the only way to make it work on my device, I kept getting a encryption error after flashing the patched boot.img, despite the fact that I have never encrypted my device.
After getting that error I tried to flash the clean rom again, but flashtool gave an error and the tablet completely died! Well, it seemed so.
It's pretty stupid but the only way to make it work again was pushing the reset button on the top right corner of the tablet for a few seconds and flashing the rom again.
About Magisk: use the OFFICIAL MAGISK XDA THREAD to download it, as https://magiskmanager.com/ is NOT the official website.
In step 3, I couldn't find the patched_boot.img file even after moving it to the root directory. So I had to (let the patched_boot.img file in the default directory):
Install ADB drivers in the computer: https://forum.xda-developers.com/showthread.php?t=2588979
Enable USB debugging in developer options in the tablet, connect it to the computer and accept the connection.
Open command prompt / powershell: "shift + right click" wherever you want to copy the patched_boot.img and open cmd or power shell.
Run the command:
Code:
adb pull /sdcard/MagiskManager/patched_boot.img
In step 4: you won't encounter that problem if you rename downloaded folders and get rid of chinese characters. Simply open flashtool, choose the scatter file, untick all options except boot and change the default boot.img with the patched one (I renamed it to boot.img, I don't know if it's necessary)
Xposed: you can install xposed using MagiskManager.
Install Xposed Installer for Magisk, go to download tab in MagiskManager and install Xposed SDK24 (for android 7.0) and reboot
Sources:
15 SECONDS ADB INSTALLER
MAGISK
SYSTEMLESS XPOSED
CHINESE FORUM
Just need TWRP and I'm happy.
There's a chinese TWRP but it's not working decently.
Rotiaiso said:
Hi Polo19!
Thanks for your post, I rooted my tablet following it! But since I encountered some issues in the process I wanted to share my experience.
IMPORTANT: For a few hours I thought I hard bricked my device, so I hope I could help somebody.
When patching boot.img with MagiskManager IF the app automatically tics "Keep force encryption" choose "Keep dm-verify" aswell!
I don't know why but this was the only way to make it work on my device, I kept getting a encryption error after flashing the patched boot.img, despite the fact that I have never encrypted my device.
After getting that error I tried to flash the clean rom again, but flashtool gave an error and the tablet completely died! Well, it seemed so.
It's pretty stupid but the only way to make it work again was pushing the reset button on the top right corner of the tablet for a few seconds and flashing the rom again.
About Magisk: use the OFFICIAL MAGISK XDA THREAD to download it, as https://magiskmanager.com/ is NOT the official website.
In step 3, I couldn't find the patched_boot.img file even after moving it to the root directory. So I had to (let the patched_boot.img file in the default directory):
Install ADB drivers in the computer: https://forum.xda-developers.com/showthread.php?t=2588979
Enable USB debugging in developer options in the tablet, connect it to the computer and accept the connection.
Open command prompt / powershell: "shift + right click" wherever you want to copy the patched_boot.img and open cmd or power shell.
Run the command:
In step 4: you won't encounter that problem if you rename downloaded folders and get rid of chinese characters. Simply open flashtool, choose the scatter file, untick all options except boot and change the default boot.img with the patched one (I renamed it to boot.img, I don't know if it's necessary)
Xposed: you can install xposed using MagiskManager.
Install Xposed Installer for Magisk, go to download tab in MagiskManager and install Xposed SDK24 (for android 7.0) and reboot
Sources:
15 SECONDS ADB INSTALLER
MAGISK
SYSTEMLESS XPOSED
CHINESE FORUM
Click to expand...
Click to collapse
Yes, i also install Xposed using MagiskManager and it works. Now i am able to use all fonctions of Greenify, Amplify, Powernap and get a pretty decent standby batterylife.
marinero57 said:
hi all
somebody tried the new rom v1.10 on needrom ??
Click to expand...
Click to collapse
Hi, I tried to follow the procedure but in ROM 1.10 doesn't work
---------- Post added at 01:37 PM ---------- Previous post was at 12:44 PM ----------
With the news roms doesn't work...
What is the rom that was working this WA??
Thanks!
I just did this to a tablet that had OTA'd the 1.10 - using the 1.10's downloaded boot and latest Magisk Manager 5.5.4 / Magisk 15.3 beta
OEM Unlock, patching boot image and patched boot image flashing worked
BUT - the included Magisk Manager does not launch after installing upon reboot...
HOWEVER - V5.5.3 of the manager did work.
$ adb -s 0123456789ABCDEF install MagiskManager-v5.5.3.apk
Success
$ adb -s 0123456789ABCDEF shell
t8_e8c1:/ $ su
t8_e8c1:/ #
Notes
1. Tablet is wiped
2. Boot delay of 5 seconds is added with "can't be trusted" warning in white text
3. Fails safetynet
Letting MagiskManager update itself to 554 also worked - so I think my method of just installing the apk from the Magisk zip's common folder was wrong.
Kerrnel said:
I just did this to a tablet that had OTA'd the 1.10 - using the 1.10's downloaded boot and latest Magisk Manager 5.5.4 / Magisk 15.3 beta
OEM Unlock, patching boot image and patched boot image flashing worked
BUT - the included Magisk Manager does not launch after installing upon reboot...
HOWEVER - V5.5.3 of the manager did work.
$ adb -s 0123456789ABCDEF install *************-v5.5.3.apk
Success
$ adb -s 0123456789ABCDEF shell
t8_e8c1:/ $ su
t8_e8c1:/ #
Notes
1. Tablet is wiped
2. Boot delay of 5 seconds is added with "can't be trusted" warning in white text
3. Fails safetynet
Letting ************* update itself to 554 also worked - so I think my method of just installing the apk from the Magisk zip's common folder was wrong.
Click to expand...
Click to collapse
Hi,
My T8 arrived yesterday and I've used OTA to update to 1.10.
Is the sptools method working with 1.10 or do I need to use this process?
Also where to the numbers 0123456789ABCDEF come from in the instructions I've quoted?
Thank is advance
i have the ota 1.10 update and the rooting was successful. magisk and xposed working flawlessly.
another point:
i have closed the bootloader after flashing the patched boot.img with "fastboot oem lock".
the device boot up is faster and the warning "...5 seconds" is gone.
now, i wait for twrp.
You dont need to unlock bootloader.
Just flash patched_boot with flash tool.
Zaphodb69 said:
Hi,
My T8 arrived yesterday and I've used OTA to update to 1.10.
Is the sptools method working with 1.10 or do I need to use this process?
Also where to the numbers 0123456789ABCDEF come from in the instructions I've quoted?
Thank is advance
Click to expand...
Click to collapse
I had multiple devices attached to the PC.
No -s ABC... needed if you only have the one.
Sent from my T8(E8C1) using Tapatalk
The suggested worked for me. I will also mention that you must be connected to the internet to patch the boot.img file with magisk manager (otherwise, the option will not be presented in the magisk manager GUI).
Were there made any changes for the fingerprint? Soimebody mentioned, it isn´t that good. Maybe the last updates change something...
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here
Big Thanks to @N3OMOD :good::good::good:
EDIT: NO FORMAT DATA REQUIRED BUT BACKUP ALWAYS RECOMMENDED
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Magisk Manager
- Internet Connection
- Your PC already installed adb&fastboot driver
- Boot.img from your current MIUI version (EXTRACTED FROM MIUI FULL RECOVERY ROM)
- vbmeta.img
Known Limitation:
- Can't modify system partition
- Maybe cause selinux problem
How to:
STEP 1
- Backup Always Recommended
- Install Magisk Manager
- Turn ON Internet Connection and Open Magisk Manager
- Press install button > select method patch a file > choose boot.img from your current miui version > WAIT UNTIL DONE
- Open download folder and copy magisk_patched.img to your PC (adb tools usually in C:\ADB and Fastboot)
- Download vbmeta.img in attachment and copy to C:\ADB and Fastboot
STEP 2
- Go to fastboot (press and hold >>> power+volume down)
- open command prompt in C:\ADB and Fastboot then type this code one by one carefully
Code:
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_redmi9.img (WARNING: if not successful cause bootloop)
fastboot flash boot magisk_patched.img
fastboot reboot
- Open Magisk Manager (Internet Connection required for download some magisk files and will automatically reboot in 5 minutes)
- DONE....ENJOY ROOT ACCESS :good::good::good:
NOTES
Tested on MIUI 11.0.3.0-11.0.6.0 GLOBAL ID, 11.0.7.0-11.0.8.0 GLOBAL
Use your own magisk patched boot from your current miui version, click here for miui full recovery rom
Q&A
Q: How to completely uninstall magisk?
A: Flash miui fastboot rom via Mi Flash or Flash full recovery rom
Q: Bootloop?
A: Disable vbmeta not successful, use adb fastboot in my comment or flash stock boot.img
Credit :
Alloh SWT
@topjohnwu for magisk
@N3OMOD for root guide xiaomi mediatek
Me for tester
i can't boot vbmeta.img
Fastboot : unrecognised option ' --disable-verity'
AstroKkngTool said:
i can't boot vbmeta.img
Fastboot : unrecognised option ' --disable-verity'
Click to expand...
Click to collapse
download my attachment adb_fastboot.zip
extract & copy folder to C:/ then try again
How did you unlock the bootloader on global rom?
Or you have non NFC version of Redmi 9?
afah_me said:
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here
Big Thanks to @N3OMOD :good::good::good:
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Magisk Manager
- Internet Connection
- Your PC already installed adb&fastboot driver
- Boot.img from your current MIUI version (EXTRACTED FROM MIUI FULL RECOVERY ROM)
- vbmeta.img
Known Limitation:
- Can't modify system partition
- Maybe cause selinux problem
- Must have stock boot.img
How to:
STEP 1
- BACKUP ALL YOUR DATA BECAUSE IT WILL FORMAT DEVICES
- Install Magisk Manager
- Turn ON Internet Connection and Open Magisk Manager
- Press install button > select method patch a file > choose boot.img from your current miui version > WAIT UNTIL DONE
- Open download folder and copy magisk_patched.img to your PC (adb tools usually in C:\ADB and Fastboot)
- Download vbmeta.img in attachment and copy to C:\ADB and Fastboot
STEP 2
- Go to fastboot (press and hold >>> power+volume down)
- open command prompt in C:\ADB and Fastboot then type this code one by one carefully
Code:
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_redmi9.img
fastboot erase userdata
fastboot erase cache
fastboot flash boot magisk_patched.img
fastboot reboot
- Setup your phone again
- Reinstall Magisk Manager and open it (Internet Connection required for download some magisk files and will automatically reboot)
- DONE....ENJOY ROOT ACCESS :good::good::good:
NOTES:
Tested on MIUI 11.0.3.0 GLOBAL
Use your own magisk patched boot from your current miui version, click here for miui full recovery rom
Credit :
Alloh SWT
@topjohnwu for magisk
@N3OMOD for root guide xiaomi mediatek
Me for tester
Click to expand...
Click to collapse
It WORKS. I'm on MIUI 11.0.4.0 GLOBAL. Huge Thanks :fingers-crossed:
Thanks it works my phone .
I am on miui 11.0.2 v. (Redmi 9 prime)
There is no update sill now,
There no Firmware 11.0.2 what I am using
What can I do further????
Can I flash the latest Global Rom on my phone using Fastboot mode????
Why Аndroid is 10 oreo? (pictured)
afah_me said:
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here
Big Thanks to @N3OMOD :good::good::good:
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Magisk Manager
- Internet Connection
- Your PC already installed adb&fastboot driver
- Boot.img from your current MIUI version (EXTRACTED FROM MIUI FULL RECOVERY ROM)
- vbmeta.img
Known Limitation:
- Can't modify system partition
- Maybe cause selinux problem
- Must have stock boot.img
How to:
STEP 1
- BACKUP ALL YOUR DATA BECAUSE IT WILL FORMAT DEVICES
- Install Magisk Manager
- Turn ON Internet Connection and Open Magisk Manager
- Press install button > select method patch a file > choose boot.img from your current miui version > WAIT UNTIL DONE
- Open download folder and copy magisk_patched.img to your PC (adb tools usually in C:\ADB and Fastboot)
- Download vbmeta.img in attachment and copy to C:\ADB and Fastboot
STEP 2
- Go to fastboot (press and hold >>> power+volume down)
- open command prompt in C:\ADB and Fastboot then type this code one by one carefully
Code:
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_redmi9.img
fastboot erase userdata
fastboot erase cache
fastboot flash boot magisk_patched.img
fastboot reboot
- Setup your phone again
- Reinstall Magisk Manager and open it (Internet Connection required for download some magisk files and will automatically reboot)
- DONE....ENJOY ROOT ACCESS :good::good::good:
NOTES:
Tested on MIUI 11.0.3.0 GLOBAL
Use your own magisk patched boot from your current miui version, click here for miui full recovery rom
Credit :
Alloh SWT
@topjohnwu for magisk
@N3OMOD for root guide xiaomi mediatek
Me for tester
Click to expand...
Click to collapse
Why Аndroid is 10 oreo? (pictured)
Mantipallykrishna said:
I am on miui 11.0.2 v. (Redmi 9 prime)
There is no update sill now,
There no Firmware 11.0.2 what I am using
What can I do further????
Can I flash the latest Global Rom on my phone using Fastboot mode????
Click to expand...
Click to collapse
Are you from India? I wanted to ask, is a model with NFC officially sold in your country?
iYowo said:
Why Аndroid is 10 oreo? (pictured)
Click to expand...
Click to collapse
Good catch, I missed this information when I had a look!
It seems to be a issue with the app he's using!
DevCheck by Flar2 (who does the ElementalX kernel for years on many different devices) reports the android version correctly - and I personally trust rather Flar2's App then anything else!
Should be just a bug in the App that OP uses...
Edit: also selinux appears to be disabled in OPs screenshot, I wonder if he did this on purpose or what the deal is (another App bug?) because usually Magisk patches selinux but doesn't disable it, at least from my experience...
Sent from my galahad using XDA Labs
afah_me said:
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here
Big Thanks to @N3OMOD :good::good::good:
REQUIREMENT :
- Already UNLOCK BOOTLOADER
- Magisk Manager
- Internet Connection
- Your PC already installed adb&fastboot driver
- Boot.img from your current MIUI version (EXTRACTED FROM MIUI FULL RECOVERY ROM)
- vbmeta.img
Known Limitation:
- Can't modify system partition
- Maybe cause selinux problem
- Must have stock boot.img
How to:
STEP 1
- BACKUP ALL YOUR DATA BECAUSE IT WILL FORMAT DEVICES
- Install Magisk Manager
- Turn ON Internet Connection and Open Magisk Manager
- Press install button > select method patch a file > choose boot.img from your current miui version > WAIT UNTIL DONE
- Open download folder and copy magisk_patched.img to your PC (adb tools usually in C:\ADB and Fastboot)
- Download vbmeta.img in attachment and copy to C:\ADB and Fastboot
STEP 2
- Go to fastboot (press and hold >>> power+volume down)
- open command prompt in C:\ADB and Fastboot then type this code one by one carefully
- Setup your phone again
- Reinstall Magisk Manager and open it (Internet Connection required for download some magisk files and will automatically reboot)
- DONE....ENJOY ROOT ACCESS :good::good::good:
NOTES:
Tested on MIUI 11.0.3.0 GLOBAL
Use your own magisk patched boot from your current miui version, click here for miui full recovery rom
Credit :
Alloh SWT
@topjohnwu for magisk
@N3OMOD for root guide xiaomi mediatek
Me for tester
Click to expand...
Click to collapse
Any bootloop Risk? Please helpme, i am noob
Modelo M2004J19G no NFC
MIUI GLOBAL 11.0.4 STABLE QJCMIXM
Android 10
Sam Nakamura said:
Good catch, I missed this information when I had a look!
It seems to be a issue with the app he's using!
DevCheck by Flar2 (who does the ElementalX kernel for years on many different devices) reports the android version correctly - and I personally trust rather Flar2's App then anything else!
Should be just a bug in the App that OP uses...
Edit: also selinux appears to be disabled in OPs screenshot, I wonder if he did this on purpose or what the deal is (another App bug?) because usually Magisk patches selinux but doesn't disable it, at least from my experience...
Click to expand...
Click to collapse
idk sir, i just download root check app & open it after root successfully ??
KevinTM93 said:
Any bootloop Risk? Please helpme, i am noob
Modelo M2004J19G no NFC
MIUI GLOBAL 11.0.4 STABLE QJCMIXM
Android 10
Click to expand...
Click to collapse
Yes, definitely bootloop risk!
Make sure you understand the instructions in this post and to have the stock kernel stored close to you, in theory you should be easy able to restore the device from bootlooping by flashing the unmodified stock kernel...
And you'll need to unlock the bootloader which will factory reset the device, so before playing around you'll probably want to backup your important files and do the unlocking process, which takes a while on xiaomi phones
Sent from my galahad using XDA Labs
Deleted...already explained
Sam Nakamura said:
Yes, definitely bootloop risk!
Make sure you understand the instructions in this post and to have the stock kernel stored close to you, in theory you should be easy able to restore the device from bootlooping by flashing the unmodified stock kernel...
And you'll need to unlock the bootloader which will factory reset the device, so before playing around you'll probably want to backup your important files and do the unlocking process, which takes a while on xiaomi phones
Click to expand...
Click to collapse
Thank you very much, I understand that there is always a risk of bootloop, but I wanted to know if with those specifications I could perform this method ... another question, where can I download the specific stock rom for my device? I appreciate your help, un MI Page i found MIUI global 11.0.5.0 QJCMIXM, and my device is MIUI global 11.0.4.0 QJCMIXM...
KevinTM93 said:
Thank you very much, I understand that there is always a risk of bootloop, but I wanted to know if with those specifications I could perform this method ... another question, where can I download the specific stock rom for my device? I appreciate your help, un MI Page i found MIUI global 11.0.5.0 QJCMIXM, and my device is MIUI global 11.0.4.0 QJCMIXM...
Click to expand...
Click to collapse
you can find the lancelot miui full recovery rom in here :
https://xiaomifirmwareupdater.com/miui/lancelot/
11.0.5.0 > global stable beta
11.0.4.0 > global stable
if you want 11.0.5.0 so update your rom first,,, if not, you can download miui 11.0.4.0 rom there and ready to patch boot.img...
I can't boot vbmeta.img
Fastboot : unrecognised option ' --disable-verity
Zeppelin_Elevation said:
Are you from India? I wanted to ask, is a model with NFC officially sold in your country?
Click to expand...
Click to collapse
There is no NFC in Redmi 9 Prime Lancelot (INDIA)
ممكن اتواصل معاك فديو شرح
Hamoo kamshto said:
ممكن اتواصل معاك فديو شر [\QUOTE]
PLEASE use english as required by the forum rules, so everyone can understand and contribute, also you'll get help much faster!
Sent from my Google Pixel 3 XL
Click to expand...
Click to collapse
Please read this guide fully before attempting to follow it. It requires some knowledge of how to use a Terminal and basic ADB/Fastboot operation. I don't think this guide is thorough enough for a person who's modifying their phone for the very first time. Feel free to ask for help though!
I am not reliable for any adverse effects this guide might have on your phone. If something breaks, that's your responsibility. However: if your phone doesn't boot anymore, but you can still get into fastboot, you should be able to flash the Stock Firmware OFP using the Realme Flash Tool. To get into fastboot, power off your phone, wait a few seconds, and hold power and volume down until you see the fastboot logo.
This guide was cobbled together using various other tutorials and my own attempts. I've used it on my RMX2075. It should also work for the RMX2076. The files Realme provides for the RMX2075 are named "RMX2076", so I assume they're the same device. I have no idea how the RMX2071 fits into this. Curiously, the TWRP version used here is intended for the RMX2071, although it works flawlessly on my RMX2075. However: if you're using it on an RMX2075/2076 TWRP thinks you're using an RMX2071, so it won't flash packages intended for the RMX2075/2076. Hence the following warning:
!!! YOU WON'T BE ABLE TO INSTALL OTA UPDATES AFTER INSTALLING TWRP !!!
If you attempt to install an OTA Update downloaded from within the Settings.app, the phone will reboot, TWRP will attempt to install the OTA Update and fail with an error. This does not break anything, it just doesn't update.
DOWNLOADS:
- Realme Flash Tool
- Stock Firmware OFP
- OTA Update OZIP
- TWRP 3.4.1b for RMX2071 by wzsx150 and LR. Team
Spoiler: further details
The licensing of this TWRP is pretty unclear, so I can't provide a download link. If you search for it Online, make sure to find a version that includes both "recovery.img" and "misc.bin"
- Realme DeepTesting App
- Magisk Manager by topjohnwu
- oppo ozip decrypt
PREPARATION:
- install ADB & Fastboot on your computer
- enable "USB debugging" on your phone
- install the oppo ozip decryption tool by following the instruction on the GitHub page
UNLOCKING
- follow the unlock instructions provided by the official Realme Tutorial
RESTORING AND UPDATING - if you're on firmware A42, skip this step
- follow the restore instructions provided by the official Realme Tutorial
- go to the Realme Software Update page, click on "How to update?" and follow the instructions
FLASH TWRP
- open a Terminal window and cd into the folder that holds recovery.img and misc.bin
cd /path/to/folder
- enter the following commands and hit enter after each
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot flash misc misc.bin
fastboot reboot recovery
- your phone should now reboot into TWRP
- enter your phones unlock code if you have one
- go to "Advanced" -> "Disable Replace TWRP"
- reboot phone
ROOTING
DO NOT use "Install Root" in TWRP, it'll "destroy" the bootloader and you'll have to flash the stock firmware
Follow this instead:
- decrypt the OTA .ozip using the oppo ozip decrypt tool (instructions on its GitHub page)
- unzip the resulting decrypted file
- copy "boot.img" onto your phone
- copy "/firmware-update/vbmeta.img" into a folder of your choice
- install Magisk Manager on your phone
- open Magisk Manager, tap on "Install" followed by "Select and Patch a File"
- select the "boot.img" you've previously copied onto your phone and let Magisk do its thing
- the patched "boot.img" is called "magisk_patched_XXXX.img" or something similar. Make note of the resulting file name which is specific to you.
- copy the patched "magisk_patched_XXXX.img" into the same folder that holds your "vbmeta.img"
- open a terminal and cd into the folder that holds the patched "boot.img" and "vbmeta.img"
- enter the following commands and hit enter after each
adb reboot bootloader
in the following step, replace "magisk_patched_XXXX.img" with whatever your patched "boot.img" is called
fastboot flash boot magisk_patched_XXXX.img/ICODE]
[ICODE]fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot
- your phone should now be rooted
I have also uploaded the stock boot.img along with the rooted version as well as vbmeta.img here. They were created using the method described above with OTA update A42. I would recommend creating your own though, since this has a higher chance of success.
Another method to get the stock boot.img and vbmeta.img is creating a TWRP backup, renaming "boot.emmc.win" to "boot.img", and "vbmeta.emmc.win" to "vbmeta.img". I have NOT TESTED this method.
I don't know if this will work for Android 11 / ColorOS 2.0. My theory is that if you can get the RMX2076PU_11.C.16.ozip somewhere, you could just follow this guide using it instead of the A42 one. Again, I have NOT TESTED this method.
Unfortunately does not work with Android 11. The result is that the phone stays in the fastboot. The Realme flash tool doesn't work anymore. The phone is now bricked. Let's see if I can reach the service now. Isn't the first time they haven't answered. Now actually needs the MSM tool. But haven't found a working one yet.
corneo said:
Unfortunately does not work with Android 11. The result is that the phone stays in the fastboot. The Realme flash tool doesn't work anymore. The phone is now bricked. Let's see if I can reach the service now. Isn't the first time they haven't answered. Now actually needs the MSM tool. But haven't found a working one yet.
Click to expand...
Click to collapse
Android 11twrp brush Android 10, and then brush Android 10twrp, you can boot
can u using volte with stock ofp eu version?
Hello everyone hope you are all keeping well.
Since I believe that many of you don't know about this, I've decided to share the steps I've done in order to root the OP 11R ( ACE 2 )
I cannot be responsible if you brick your device. Your phone, your choices, your responsibility!
1 - Unlock the bootloader (if you haven't done it already...beware that this will erase all of your user data). To do so, you must:
Enable developer options
Enable the "OEM unlocking" option
Enable USB debugging
Have both adb and fastboot, from SDK Platform Tools available on your PC
Connect your phone to your PC using the USB cable and run the following commands:
adb devices
adb reboot bootloader
(so your phone will reboot into fastboot mode)
fastboot flashing unlock
(device should now unlock)
fastboot reboot
(device reboots with an unlocked bootloader and data partition wiped so set up the device from scratch again)
2 - Download OP 11R stock boot.img that you may find later on this post, that matches your current build.
Copy the boot.img to your devices internal memory
Leave a copy of it on your PC (on the same folder you have adb and fastboot...you never know if you will need to use it again in the future...to restore the stock boot.img, aka revert to stock...)
Indian Boot.img A_0.8 - download
3 - Download latest Magisk Manager from HERE and install it on your phone
4 - Open Magisk Manager App and press:
Install
Select and Patch a File
Browse to the path where you saved stock boot.img and select it
Magisk Manager will now patch the boot image and store it in [Internal Storage]/Download/magisk_patched.img
5 - Copy the patched boot image from your device to your PC (Store it on the same folder where you have adb and fastboot)
6 - Flash the patched boot image to your phone by running these commands (remember, you must have patched boot image on the same folder you have adb and fastboot and, of course, your device must be connected to your PC...)
adb reboot bootloader
fastboot flash boot magisk_patched.img
fastboot reboot
7 - After the phone boots up, hopefully with a normal boot (almost feels like nothing happened....), install/open Magisk Manager App again and watch Magisk doing it's magic!
8 - Enjoy!
All credits goes to topjohnwu and his incredible work with Magisk.
Why title says NORD 2T?
firoz3321 said:
Why title says NORD 2T?
Click to expand...
Click to collapse
MB ... typo
Thank you for detailed steps.
Is there any benefit with KernelSU over this method ?
I always used Magisk on OP8, but recently saw an article for OP11 with Kernel SU.
Also is there MSM tool support to recover softbriked device ?
firoz3321 said:
Thank you for detailed steps.
Is there any benefit with KernelSU over this method ?
I always used Magisk on OP8, but recently saw an article for OP11 with Kernel SU.
Also is there MSM tool support to recover softbriked device ?
Click to expand...
Click to collapse
Sorry but there is no msm tool available for new OnePlus devices. + You can use Fastboot enhance tool from github to recover softbrick , magisk is always recommended for rooting because of ease of steps and simple to use
Hello, thanks for the detailed instructions. Today I updated to A. 10, and unfortunately lost my root access. Without the root cannot extract the boot image. If you're already updated and have a backup of A. 10 boot, can you please share?
saifsohel said:
Hello, thanks for the detailed instructions. Today I updated to A. 10, and unfortunately lost my root access. Without the root cannot extract the boot image. If you're already updated and have a backup of A. 10 boot, can you please share?
Click to expand...
Click to collapse
i didn't got the update yet ... + oxygen updater also showing A.08. i will update this post soon as I got update
shiki_senpai said:
i didn't got the update yet ... + oxygen updater also showing A.08. i will update this post soon as I got update
Click to expand...
Click to collapse
Then remember to take a backup of the boot before rebooting. I messed up big time.
Thanks for the detailed information man. Can I know if bootloader unlock decreases widevine L1 to L3? As this was case with my OP6