Hi there!
Is there any repository of baseband radio flashable zips, just like we found it for Nexus models?
Right now, I use default baseband version, but LTE data speed is quite slow: less than 15 Mbps. With my last device I was on ~35 Mbps.
Thanks in advanced.
I was going to ask the same question. I'm on Lineage OS and want to update the baseband without reverting to stock and then doing an OTA update. The thread with the "official" firmwares are also quite old.
Is it possible to 'dd' the according partition on a updated device to get a fastboot flashable image?
With the old radio version is a problem while flashing LineageOS that the MAC adress is cloned. We have the problem in our Wlan with two Moto z and the same MAC adress.
I am interested the get the acutel modem version to clear this problem.
now I am flashing ex kernel additionally to solve this problem.
Nothing ?
It should be really helpfull.
Related
Hi i recently had some trouble with my phone sgh1337m and somehow lost my backup , i downloaded this but it is not factory and seems broken , no wifi or phone dial function. .
lluggnut said:
Hi i recently had some trouble with my phone sgh1337m and somehow lost my backup , i downloaded this but it is not factory and seems broken , no wifi or phone dial function. .
Click to expand...
Click to collapse
*sigh* You realize when you say "I downloaded this..." without providing what "this" is is pretty useless for us to help you troubleshoot?
What update WERE you on before you started modifying the phone?
What did you download and install?
What modem / baseband version is installed?
Wifi and phone functions are most likely not working because you either downloaded the wrong thing or didn't follow the installation instructions correctly. Typically this would be because of mismatched modem and kernel or there's a patch that needs to be installed.
Usually I would just say install the newest stock firmware (4.4.2) through Odin, but depending on what update the phone had originally and if you plan on continuing to customize your phone, it might be better to stick on an older system as the newer ones really lock down the ATT version.
Long story short: Help us help you. Provide ALL the details about what's going on and we can probably get you fixed up easily enough.
Sry
I337MVLUFNC1_880525_REV06_user_low_ship_MULTI i installed this rom , i was on kit kat 4.4.2. and i installed gummy rom which did not work , then realized i lost the @#$#@% backup here is what it says under about device: model sgh1337m
android version -4.2.2
baseband -1337mvluamdj
kernel version 3.4.0-517283 [email protected]#1
build number - jdq39.1337mvluamdj
selinux status - permissive
i have data but no wifi and cant dial out . wish i was more careful with my stock rom lol. i dont think the kernel is right ? Think gummy rom did something to it . can i fix or can i get stock rom ? I am on rogers carrier and need canada rom or to fix can you tell me if there is a patch .
I just realized that samsung posts their factory roms so i am thinking to go back to SGH-I337M RWC I337MVLUFNC1 4.4.2 . which is what I had there before , Do i need to do anything special before i flash it , this file is .zip so what is the best way to flash ? ROM Manager?
Hey Guys
Having some trouble with my z2 tab. Might be hardware related not sure yet. Regardless, can anyone tell me if the firmware a sony experia is running before flashing cyanogenmod makes a difference? I am unclear on this being an HTC user for years I know that firmware in HTC land updates modem and wifi drivers etc so base firmware makes a difference. Is this the same in xperia land? Seemingly I have two choices moving forward with my z2 tab as doomlord has stated that there are two firmware versions that are compatible with his root and CWM recovery.
He says:
7.1.1.A.0.402 - v03
17.1.A.2.36 - v01 or roms based on that firmware. Not sure what he means by roms based on that firmware. Can anyone please shed some light?
Thanks
Bump
bacon612 said:
Having some trouble with my z2 tab. Might be hardware related not sure yet. Regardless, can anyone tell me if the firmware a sony experia is running before flashing cyanogenmod makes a difference? I am unclear on this being an HTC user for years I know that firmware in HTC land updates modem and wifi drivers etc so base firmware makes a difference. Is this the same in xperia land?
Click to expand...
Click to collapse
I am running CM11/CM12 since last summer on my SGP512. No problems whatsoever.
To run CM12, you don't need to install a recovery with a stock kernel. Just flash the CM boot. img via fastboot as described in the thread, it contains the recovery and the kernel.
Note that the CM12 recovery has some bugs, so sometimes the CM11 recovery has to be used. Everything is explained in the CM12 thread in the original development section.
Thanks. I too have been running cm11 and now 12 since may. I am more curious if the base firmware before u load cm makes a difference
Hello!
Phone Gt-i9300
So i was happily using omnirom for 1 year until my motherboard died last week
so i ordered a new board. i installed it, it was on 4.1.2 unlocked, and i decided to update it without making a efs backup! so dumb!
So i installed a 4.3 Stock ROM, no signal so i had to install
-Patched XXUFMJ9 kernel
- Patched BUUGMJ3 modem
So i can use my phone with no problems in STOCK....
BUT. I hate STOCK..
I have tried to flash omniroom 4.4.4, but it says unknown baseband, uknown imei.. i tried installing omniroom and then installed again the patched modem buugmj3 and ofcourse nothing happened...
So.. my question is.. Am I forced to stick with this TouchWiz Rom? or is there any way for me to do something to get omniroom detecting my signal?
Oh something i was forgeting.. before i updated to stock 4.3... i installed first omniroom.. but i decided to update to stock 4.3 because i was getting signal but it could take 1 HOUR for the phone to get the signal.. and from there signal would lose at any moment.
anyone? i read the FAQ and did this
Q9: I'm sure I've correctly flashed an SGSIII ROM with the right CSC for my network but why can I still not make calls?
If your phone was running an Android version less than v4.3 before you flashed a new ROM then you may need to install a patched modem and, if you upgraded to a newer stock ROM, a patched kernel too such as the zuluman modem FW/kernel. You will usually not need to install a patched kernel if you install CyanogenMod or a CM-based ROM. A number of kernels and modem firmwares patched for Android 4.3+ are available here.
Click to expand...
Click to collapse
and still nothing
if not, it's because kernel android is monolithic?
if yes, how to do?
I read several posts about update firmware on my P7500XXKI1 ("open europe") but no procedure done detects and updates my modem.
someone notice and wrote it.
I have a f**k of tablet 10 y.o. but a decent firmware, lollipop too, with 3G and wifi I can't find it.
thanks to everyone.
Got a second-hand S III and looked for a ROM. Since my favourite OS was 8.1 Oreo, I decided to install LineageOS 15.1. Installed and so far is great, except I can't connect to WiFi. When I click on the WiFi, it says Connecting and then goes back to Saved, then to Disabled. Before I ROM'ed it, there was no problem with WiFi. MAC address is the same, I checked it. Can anyone help me?
Steamgo said:
Got a second-hand S III and looked for a ROM. Since my favourite OS was 8.1 Oreo, I decided to install LineageOS 15.1. Installed and so far is great, except I can't connect to WiFi. When I click on the WiFi, it says Connecting and then goes back to Saved, then to Disabled. Before I ROM'ed it, there was no problem with WiFi. MAC address is the same, I checked it. Can anyone help me?
Click to expand...
Click to collapse
this is a common bug. just try switching the wifi on the phone on and off with the button or reboot the phone and try again or remove / forget the wifi and add it again. ive had this happen with other roms too, but usually it works after some attempts to connect.
you could also try resetting the phone / factory reset or full wipe and reinstall the rom.
if it doenst work at all flash the latest stock rom in odin complete with all modules (bootloader, ap, modem and csc) to update your modem and csc.
then install your custom rom again.
if it wont work at all try another mod.
you can use samfirmreborn to find the latest stock rom for your model:
Releases · ivanmeler/SamFirm_Reborn
Contribute to ivanmeler/SamFirm_Reborn development by creating an account on GitHub.
github.com
[Q] [SOLVED] How to update baseband version from Custom ROM?
I am currently on CM10.1 for Galaxy Grand (Custom ROM) and right now the baseband version i have is I9082XXAMD1. The latest updates to stock ROM through Samsung, updates the baseband version to I9082XXAME4. How can i update my baseband version...
forum.xda-developers.com
{Guide}{I-9505} How to flash baseband (modem) and Bootloader in Odin
Hi everyone, this is my little Guide how to flash a modem (baseband) or a bootloader, or both together in Odin. Reading many threads in the last weeks, has showed me there are many people who have problems with flashing via Odin. I hope this...
forum.xda-developers.com
or find your firmware here:
Samsung GT-I9300 Galaxy S3 - Sfirmware.com
Download the latest version of Samsung firmware GT-I9300 for your region for free. Please go to the firmware download page.
sfirmware.com