Hi,
I got brand new Redmi 3 Pro (3/32 GB) which is great device. I wanted to install MIUI 8 on it so I applied for unlock which passed ok.
Then I download a MIUI 8 ROM (cannot remember which one now) and pasted into my device as a .zip file. I went to 'Update' app and I choosed the file. My phone rebooted and it went into some mode (please note that my knowledge of flashing is very poor) where it was installing the package. It did not show any veryfication screen at any point. The phone was in that state for about an hour when I decided to reboot it - I held the power button for few seconds and my phone switched off. Now I am unable to switch it on.
I tried to boot it in Download Mode but nothing works. I was pressing the power button for long time - nothing happened.
I tried to hold Volume Down + Power Button - nothing
Volume Up + Power Button - nothing
Volume UP + Volume Down + Power Button - nothing
Volume UP + Volume Down - nothing
The sceen remains blank and no light is turining on - not even the light when I charge it.
I was using two different comupters with Windows 8 and Windows 7 but no luck. I installed MiFlash and MiSuite. When I connect the phone to the Windows 8 machine it gives me the sound of connected device and MiFlash shows a device that is connected but it cannot communicate with it. It stucks on "Sending Hello Packet" - the phone does not respond back.
I was following many tutorials but none of them solved my problem.
and many other threads but nothing helped me.
Please give me advice what should I do.
You have to work with edl mode and port v7.1.2.0 rom.
Sent from my Redmi Note 3 using Tapatalk
Related
Hello XDA Community,
Sorry I didn't know where to post this...
Two weeks ago I purchased a Lenovo S8-50LC Tablet. It was working fine until last night, I was watching movies on Youtube and chatting with some friends. Then I went to bed and there was still around 50% charge in the battery.
When I woke up, I tired to wake up the device but it didn't respond. I thought it was stuck or something, so I tired to hold the power button for 20 seconds to do a hard reset but still didn't work. After that I plugged it in to a power source with the compatible charger that came with it and the screen light up with no data on it. I tried to power it on then and it showed the Lenovo logo and in a very tiny font underneath the logo it said "Boot Fail, Efi hard drive".
Then it would take me to a screen which says:
"EFI Shell version 2.31 [1.0]
Current running mode 1.1.2
map: Cannot find required map name.
Press ESC in 5 seconds to skip startup.nsh, any other key to continue.
Shell>_"
http://imageshack.com/a/img907/6979/reZJPf.jpg
and that's it!
I don't understand why this screen appears. I mean the tablet was working properly over the night and it had no issues whatsoever, but now it doesn't boot!
Then I tried to power it off and press Volume UP + Volume DOWN + Power Button, it showed a black screen with only one line: "FastBoot Starting...Can't get eMMC Info, revert to default value!"
http://imageshack.com/a/img661/1158/bRg9jj.jpg
That's all what I got...
PS:
1- The tablet does all that only when it's plugged to a power source, but when it's not plugged, it doesn't show anything.
2- When I plug it into the pc via USB, the pc doesn't recognize it.
3- I tried to boot into fastboot mode or recovery mode but it doesn't work either.
Please help me fix my tablet and I hope it's going to be soon. Thank you all in advance!
UPDATE:
1- I left it on the charger for maybe 2 hours and now it's turning on without being plugged in to a power source.
2- When I press Volume UP + Volume DOWN + Power Button, it shows the previous mentioned phrase, but now when I connect it to the pc via USB, windows recognizes it as Lenovo Composite ADB Interface under Android Phone
http://imageshack.com/a/img903/3907/oQdSAB.png
3- Tried to perform some fastboot commands like flash, format and erase, it always fails with the error:
Failed (remote: unknown command)
UPDATE2:
1- When executing ADB commands like adb devices it says "no devices found"
anyone?
Hello. A friend of mine has the same problem. He dropped the device and the screen cracked. After a reboot the tablet is on the same situation. I plugged a keyboard via otg , it stops the countdown in the EFI SHELL, but i can not type anything. I think is an eMMC related problem.
I guess the eMMC is totally fried or something. But, I mean, I didn't leave it on the charger all night or anything, why would it do such a thing!
any solutions or suggestions??
reflash the stock firmware: http://forum.xda-developers.com/showpost.php?p=58934356&postcount=90
mrhamed said:
reflash the stock firmware: http://forum.xda-developers.com/showpost.php?p=58934356&postcount=90
Click to expand...
Click to collapse
Thank you for your reply but it doesn't work .. as I mentioned earlier I don't have a "download mode" because any key combination I try to use just sends me to the shell window .. anymore suggestions would be appreciated!
-unplug usb cable
-turn off
-hold (volum+) and (volume -) towice
-press power button
It should go to fastboot quickly (a black screen with a little text)
Hi guys !!!
I got a newly bought "Lenovo Tab 2 A10-70L".
1. I charged it.
2. I started it to complete the setup procedure.
3. After the setup was completed successfully, I turned the device off by pressing the Power-Button. There was no shutdown screen and no shutdown animation either. The screen immediately faded to black.
So that's what I did. No rooting attempt, no fancy flashing activities ... nothing the like, just these three steps. But nevertheless it seems to be dead now, 'cause it won't boot anymore. Pressing the Power-Button has no effect. What I've already tried to solve the problem:
1. pressing the Power-Button longer than 10 seconds -> no reaction
2. trying to start the recovery menu by pressing [Power + Vol+] , [Power + Vol-] , [Power + Vol+ + Vol-] -> no reaction
3. trying to make the device accessible with my PC (with all the necessary drivers installed) -> Tablet was not recognized (Windows Explorer, MTK Droid Tool, SP Flash Tool)
So I suppose the tablet is deader than dead, isn't it?. But just to be sure: Is there anything left I could try in order to reanimate this device before sending it back to the merchant (and of course without voiding the warranty)?
Greets,
The SphereX
There is nothing else, just send it back
So thanks to Netflix and its implementation of security net I wanted to install Magisk on my Z2.
Im running the stock 6.0 Rom which was just rooted with supersu.
My tab was charged 80+%
I uninstalled SuperSU, went to TWRP and flashed Magisk.
After flashing the screen stayed black. Nothing at all.
Long press power gives me one vibration after 3 seconds but nothing else.
Long press power & vol - gives me the same vibration
Long press power & vol + gives me nothing
Connecting the tab to the computer gives me nothing. No device recognised (no adb, no fastboot)
Connecting the tab to a charger has the LED blinking red.
Long pressing power makes the led turn solid (no blinking)
Power & vol - the same
Power & vol + nothing
Basically I seemed to somehow have turned my tab into a brick oO
I can't even get it to boot to twrp or fastboot
Atm I'm letting it charge just to see if that was an issue (I doubt it)
Otherwise the only thing I can think of is opening it and disconnecting the battery...maybe that will help?
Ok nevermind. I managed to get into flashmode and reflash. tab is now working again!
How did you get it to be recognized and reflash? I flashed mine after rooting and I get similar behavior to what you were getting. It will vibrate once if I press the power button, I can get it to turn the light blue if I hold the up volume and the power button while plugged in. The screen will not turn on at the Emma tool doesn't seem to recognize it.
Same Problem here.
@pseudoheld could you please provide some more info?
I have installed Crdroid Nougat ROM to my LG G2 D802 yesterday, everything was fine. After flashing something via recovery phone went dark. When I boot device it shows only LG logo with secure booting error, then the screen goes black while phone is still on. Download mode and recovery wasn't working. When I plug to usb computer was going crazy with device errors. I tried a lot of solutions like this , with ubuntu and windows 10. Nothing worked for me. After a few hours I found a simple solution in a forum. Worked for me, maybe work for others..
Press Power and Vol Down buttons together for about 10 seconds, When you see LG logo release for a half of second and immediately press and HOLD again Vol Down + Vol Up button. Factory reset screen will come. Select yes with vol down button and press power button to factory reset.
themaster33 said:
I have installed Crdroid Nougat ROM to my LG G2 D802 yesterday, everything was fine. After flashing something via recovery phone went dark. When I boot device it shows only LG logo with secure booting error, then the screen goes black while phone is still on. Download mode and recovery wasn't working. When I plug to usb computer was going crazy with device errors. I tried a lot of solutions like this , with ubuntu and windows 10. Nothing worked for me. After a few hours I found a simple solution in a forum. Worked for me, maybe work for others..
Press Power and Vol Down buttons together for about 10 seconds, When you see LG logo release for a half of second and immediately press and HOLD again Vol Down + Vol Up button. Factory reset screen will come. Select yes with vol down button and press power button to factory reset.
Click to expand...
Click to collapse
This worked beautifully after a few tries to get the timing right! Thank you!!
Hello guys ,please forgive my ignorance, a few days ago ı downloaded an application to my asus k011 and honestly the internal memory was almost full (someting 3,80gb) it got so slow and turned off by itself, now freezes on ASUS Logo never starts, no access to recovery mode, (Pressing home+volume up doesn't get me there either) when ı connect it to a pc, pc recognizes it as android device but not as K011 , ı have tried adb commands(recognizes the device as abcdefg1234567890 on command prompt) it did not work also, ı have heard that it is possible to recover it's recovery mode via xfstk downloader but ı couldn't find it's firmware image file. Sorry for writing too much
Had similar problem look on my post asus fonpad 7 hard bricked .
But first try this:
make sure your device is off if not press long power button. Now press together Vol + and Power button at the same time , it will vibrate but don't release keys , once ASUS logo appear release both keys and fast press just Vol - button several times until you see USB logo and Droid Boot screen and plug back usb cable .