Hello..
I have a problem with my J7 Prime after flashing ROM GHAKOP version B i can't adjust brightness, it always like 100% bright i can lower it but no change still 100%bright, out door untick.
Before it happen i use GHAKOP ROM versi A and it run like what Dev post about bug. And then there is latest update firmware j7 prime so i flash back with Stock rom j7prime and update from OTA after update to the latest firmware i flash new rom update GHAKOP ROM B
and it run good without bug brightness.. but when standby about 2 minute, and turn on screen the brightness turn so bright adjusting it is no effect..
I flash to stock rom J7 prime the problem still there, flash another costum rom still have brightness bug, but this bug will gone if i flash the latest update j7 prime firmware with base band G610FDDU1AQB3 indonesia.
And now i still use GHAKOP ROM B with this bug and make battrey so fast draining hahaha.. please dev or mod who can help me to fix it
Sory for long text and thank you before.
Ara Hyde said:
Hello..
I have a problem with my J7 Prime after flashing ROM GHAKOP version B i can't adjust brightness, it always like 100% bright i can lower it but no change still 100%bright, out door untick.
Before it happen i use GHAKOP ROM versi A and it run like what Dev post about bug. And then there is latest update firmware j7 prime so i flash back with Stock rom j7prime and update from OTA after update to the latest firmware i flash new rom update GHAKOP ROM B
and it run good without bug brightness.. but when standby about 2 minute, and turn on screen the brightness turn so bright adjusting it is no effect..
I flash to stock rom J7 prime the problem still there, flash another costum rom still have brightness bug, but this bug will gone if i flash the latest update j7 prime firmware with base band G610FDDU1AQB3 indonesia.
And now i still use GHAKOP ROM B with this bug and make battrey so fast draining hahaha.. please dev or mod who can help me to fix it
Sory for long text and thank you before.
Click to expand...
Click to collapse
Did you find the solution I also have the same problem, please
Same problem here...
Facing this problem too on my J7 Prime. The most recent security patch and update practically screwed my brand new, non rooted phone over, so I flashed it back to the stock ROM, and the brightness bug appears. Tried upgrading it with the new patch again, and the problem stayed. Also tried rebooting, factory reset, flashing again with other versions of ROM for the phone, but all failed. Please help!
Try seeing if "automatic brightness" is enabled - if so, disable it and try adjusting brightness.
If that doesn't work, some people reported that installing this app fixed the same issue on another Samsung model https://play.google.com/store/apps/details?id=com.velis.auto.brightness and it remained fixed after they uninstalled the app
have you fixed your phones yet?
Related
Hello
I installed the KANG ROM found in the following thread [ROM][KANG]CM9 ICS 10.1 WiFi Preview 02/08/12 and the boot screen seems to refresh/scroll endlessly. Once the lock screen comes up (which scrolls endlessly as well), if I press the power button to turn screen off and then switch it back on, the display is stable.
I use the Korean Version SHW-M380W (Galaxy Tabl 10.1 Wifi 32GB). I tried Galaxy Task Slim 13.1 and other ICS Roms found on XDA, but the result is same.
Can someone please let me know a fix for this?
Thank you so much.
Ping
Ping...
Doesn't anyone else face this issue?
I don't think it supports the korean tab
Hmm I saw that if I restore /boot from stock image backup in HC 3.2 this issue was solved. Tried and tested it and worked fine. But when I upgrade to ICS, there is no /boot to restore from. Just tried it with the Hc 3.2 /boot and the system hanged.
Probably different ramdisks as ics kang is based of devices they own and custom via the model as the Korean tab is not part of it you may need to request or hope someone donates one to them, and if it was the official update of ics it would work but these are custom made builds based off the source ics package given by Google so it isn't an official update like HC3. 2
Sent from my GT-P7500 using Tapatalk
Thanks
Thank you for your reply.
have you tried romans?
Romans
You mean the AOKP one right? Yeah, I have tried it, but the same issue
I mean, the one from here: http://forum.aokp.co/page/releases
Build 28 to be specific. Strangely, the same (screen jumping) issue was there with CWM as well. And pershoot was kind enough to make a new CWM just for Korean tab. I wonder what changed though (Am quite a newbie to rooting and stuff, so dont really know where to go to)
The pershoots CWM which fixed a screen jumping issue for CWM (not for boot screen though) is found here: http://forum.xda-developers.com/showthread.php?t=1360588
Thanks bro.
So its all fixed?
Oops, I missed the whole point Actually, I had tried that after the [ROM][KANG]CM9 ICS 10.1 WiFi Preview 02/08/12 version, but the issue persisted. Its only with the bootscreen that this issue exists. Once we go to the lock screen, the issues still exists, but a screen off -> screen on (using the power key) quickly restores the screen back to the non-fluctuating version.
Wait, why havent you used kang by Roman? Its already coming to 4.0.4
Build 29
Thanks Misledz: I tried out Build 29 located in the following page:
http://forum.aokp.co/page/releases
Still the problem persists
I think you need a clean wipe, like generally wipe everything off it, a factory reset and stock firmware flash, then see if it persists.
Only this solution worked for me on EU version:
http://forum.xda-developers.com/showthread.php?t=1555984
Tried that but still no luck
snpetit said:
Only this solution worked for me on EU version:
http://forum.xda-developers.com/showthread.php?t=1555984
Click to expand...
Click to collapse
I guess I have the same recovery. The issue is not with the scrolling recovery, but with the scrolling lock screen. Did it get fixed for you as well? Am using AOKP build 30.
Thank You!!!!
snpetit said:
Only this solution worked for me on EU version:
http://forum.xda-developers.com/showthread.php?t=1555984
Click to expand...
Click to collapse
Thank you so very much!! The issue which was bothering me for the last three months is now solved. Life saver..
Dear all,
I noticed that my P7510 running on ICS 4.0.4 (XWLP5) has an unstable WiFi connection when the received WiFi signal strength is not maximum (2 or 3 out of 4 bars). Connection often disappears and when trying to reconnect to the WiFi network manually, the there is no response. Turning off / on Wifi on my Tab is no solution to the problem either. Even a full reboot does not always help. I updated from HC 3.2 to ICS 4.0.4. after full flasing HC 3.2 first.
Is this a known issue? I cannot find any decent info on this. Or is there a ROM that fixes this? Please help. Thanks in advance.
I had no problem with the WiFi what so ever not with 4.04 and not with cm 10 jelly bean
Did you have that problem on 3.2?
Try and flash the official ICS from sammobile with odin
Thankfor replying. I did not have this issue HC 3.2. I went back to stock HC3.2 and updated via WiFi to official ICS v4.0.4. No official releases for my country for P7510 are available for my Tab, but other official ICS v4.0.4 versions I tried from Sammobile have same issue.
I'm thinking to go to CM 10 release, but since wiping is required and my P7510 has brick bug, I'm hesitating to do this operation.
Try the sammobile UK version that's what iam running and it had no problems
Cm10 is faster than official ics and gives u much more options It's a better experience at least for me except for a bug or tow but some people don't even notice them
About the brick bug I don't know what that is cause I had no problems wiping data so i can't help u their sorry
Sent from galaxy tab 10.1
atsamoon said:
Try the sammobile UK version that's what iam running and it had no problems
Cm10 is faster than official ics and gives u much more options It's a better experience at least for me except for a bug or tow but some people don't even notice them
About the brick bug I don't know what that is cause I had no problems wiping data so i can't help u their sorry
Sent from galaxy tab 10.1
Click to expand...
Click to collapse
I already tried UK version from Sammobile, same WiFi issue when signal strength is not maximum. Regarding the brick bug: check this out: http://forum.xda-developers.com/showthread.php?t=1879941
Dead Silence said:
I already tried UK version from Sammobile, same WiFi issue when signal strength is not maximum. Regarding the brick bug: check this out: http://forum.xda-developers.com/showthread.php?t=1879941
Click to expand...
Click to collapse
I don't know what it's not working for you every thing oky with me
About the brick bug....... I just checked and as it turned out I too have the brick bug and I have actually ran EXPERIMENTAL-p4.zip
I have wiped the data and installed custom roms more than I can count......i don't know maybe it's over-rated or iam just lucky!!
Iam afraid to do it again now but he says here "Avoiding brick:
The only danger now seems to bi if you are on stock ICS ROM and you execute factory/data reset in Samsung recovery.
If you are using custom ROMs and CWM you should be safe because all custom ROMs/krenels have now removed mmc_cap_erase() from list of capabilities."
Iam running a custom rom so I don't know.....
hi, i just want help with my samsung Galaxy S2 I9100... For no reason the acelerometer and vibration of my phone stop working and it started to have software issues, if i am on stock JB 4.1.2 the lockscreen wake up takes like 10 seconds, and when im about to write someting or use the keyboard it freezes for like 10 seconds too, and then the keyboard appears, but this happen everytime i will use the keyboard. Why does this happen on stock JB but not on CM11, CM10.2 or stock ICS 4.0.3?
Note: I think acelerometer and vibration are hardware issues but i dont know why the keyboard freeze and wake up delay just happen on stock or stock based roms but not on CM11, CM10.2 and stock ICS 4.0.3? I already try to flash another stock JB rom from sammobile but the bug remains.
With the keyboard is a problem of rom....Try flash another rom..i recommended neatrom which this custom rom doenst have bugs...And also of your accelometer that smells hardware problem!
HannibalLec said:
hi, i just want help with my samsung Galaxy S2 I9100... For no reason the acelerometer and vibration of my phone stop working and it started to have software issues, if i am on stock JB 4.1.2 the lockscreen wake up takes like 10 seconds, and when im about to write someting or use the keyboard it freezes for like 10 seconds too, and then the keyboard appears, but this happen everytime i will use the keyboard. Why does this happen on stock JB but not on CM11, CM10.2 or stock ICS 4.0.3?
Note: I think acelerometer and vibration are hardware issues but i dont know why the keyboard freeze and wake up delay just happen on stock or stock based roms but not on CM11, CM10.2 and stock ICS 4.0.3? I already try to flash another stock JB rom from sammobile but the bug remains.
Click to expand...
Click to collapse
It's a software problem. Maybe the stock JB roms that you are flashing are defective or have been poorly made. Try neatrom v6.4 by sale, I don't have any issues so far
gsstudios said:
It's a software problem. Maybe the stock JB roms that you are flashing are defective or have been poorly made. Try neatrom v6.4 by sale, I don't have any issues so far
Click to expand...
Click to collapse
But i did try with fusion rom (s5 style) and the stock software from samsung wich comes with the phone preinstaled, i will give a try then, thanks..
New info
Well, i just found that the software issues are caused by hardware issues, with a test i just doscovered that the vibratión doesn't work from hardware, and both acelerometer and ambient light sensor, so the system try to deal with it, wich causes the freezes and laggs with keyboard and lockscreen. How can i disable the three hardware components totally in stock Jb to avoid this freezes? I dont feel that vibration is hardly necesary for me. Thanks in advance.
I in the past did not have the issue where the camera keeps making sound and can't focus at all, I've seen that devs have made special kernel for such users, is this issue permanent for all roms that I install henceforth or just on the current rom, if I flash a focus Fix kernel will its effect be on my current rom only or on all the roms I install after that? does focus Fix kernel restore it back to original state or you still have slight issue and hardware clicks? I'd appreciate answers!
kewlest22 said:
I in the past did not have the issue where the camera keeps making sound and can't focus at all, I've seen that devs have made special kernel for such users, is this issue permanent for all roms that I install henceforth or just on the current rom, if I flash a focus Fix kernel will its effect be on my current rom only or on all the roms I install after that? does focus Fix kernel restore it back to original state or you still have slight issue and hardware clicks? I'd appreciate answers!
Click to expand...
Click to collapse
Hi
Just like you I didn't have focuse issue but after I flashed a ROM with the fix now i have clicking sound and refocusing in videos. And I have this problem now in every ROM even the ROMs without the fix.
Now I'm trying to solve this problem, I hope rolling back to the official stock ROM will help me.
I don't recommend to install a ROM with the fix!
Xlipton said:
Hi
Just like you I didn't have focuse issue but after I flashed a ROM with the fix now i have clicking sound and refocusing in videos. And I have this problem now in every ROM even the ROMs without the fix.
Now I'm trying to solve this problem, I hope rolling back to the official stock ROM will help me.
I don't recommend to install a ROM with the fix!
Click to expand...
Click to collapse
install pixel experience++ unofficial rom, you won't have the focus issue on that, it has no bugs except for the fact that volte doesn't work on it after reboot yet.
Xlipton said:
Hi
Just like you I didn't have focuse issue but after I flashed a ROM with the fix now i have clicking sound and refocusing in videos. And I have this problem now in every ROM even the ROMs without the fix.
Now I'm trying to solve this problem, I hope rolling back to the official stock ROM will help me.
I don't recommend to install a ROM with the fix!
Click to expand...
Click to collapse
install pixel experience++ unofficial rom it won't have focus issue, you won't have volte on that after reboot though. it doesn't have any other bug that I know of
Does the Focus Issue problem work with Pixel Experience++ ?
Because i have the problem since i flashed a rom and the problem is still alive
i have tested many different camera apps but none fix the blurry pictures.
the focus works on a very low distance, but when you go outside and want to take a picture, they are always blurry..
I had the focus issue (blocked at 20 cm) and installing Resurrection Remix (RR-N-v5.8.5-20171006-x2-Final.zip), worked for me
Dear All,
Has anyone get problem as title say, after flash ONEUI ROM as the thread say, when I flash back to PE Caf ROM the problem happen even when I try clean install
Edit : fix by boot back to MIUI Rom and flash all region Zip.