[ROOT] (NEED MOVING, ADMINS) C6 Clone (MT6580, Android 5.1) - Android Q&A, Help & Troubleshooting

Hello people. After a long time searching and trying, I finally get this model rooted. The problem was, basicly, the bootloader. After unlock it, I was able to root the device. I'll tell you the steps, but be warned:
UNLOCK BOOT LOADER IS RICKY, AND YOU MAY KILL THIS DEVICE. FOR NOW WE DON'T HAVE ANY ROM FOR DOWNLOAD, SO WE CAN'T UNBRICK IT WITH SP FLASH TOOLS.
YOU MAY LOOSE ALL YOUR DATA AFTER BOOTLOADER UNLOCKED!! TAKE A BACKUP!!
ME AND/OR XDA CANNOT BE RESPONSABLE FOR ANY BRICK TO YOUR DEVICE.
YOUR ARRANTY WILL BE VOID.
THIS METHOD IS SOMEHOW FAIL. MAYBE YOU MAY HAVE TO DO IT AFTER A RESTART.
YOU WAS WARNED!!​
This sayed, you will need the USB drivers, adb, fastboot. I made the hardwork for you, and the files I used are attached bellow. Unpack it to a folder, let's use C:\C6 to be easyer. You need also Kingo Root For PC (not King Root), you can download from https://www.kingoapp.com/. Install it, but don't run. Make sure you have enought battery, as the process can take a long time (for me, all procedures taked 30 eternal and nervous minutes). The process I made was on Windows 10 64bits, so, some steps maybe differ if you use a different system.
Once prepared, let's go again.
Phase 1: Preparing the field:
Set screen timeout to 30min, and remove any PIN, password or secure lock screen settings.
If USB Debug is disable, you must go to Settings > About Phone > Tap Build Number until "You are a developer" appears.
Now, go Settings > Developer Options > Check USB Debugging. Accept the warning.
Now, go Settings > Security > Check OEM Unlocking. Accept the warning.
Now, connect the phone with PC
It will install the drivers. If it don't install, go to Device Manager, look for "Android MT65XX" or something similar, and update the drivers with the ones I give to you. FOR NOW ON, DON'T REMOVE THE CABLE FROM PHONE OR PC.
If all are correct, the phone will ask for a confirmation after installing the drivers. Check "Always allow", and tap OK. To re-confirm everything is ok, open a command prompt as administrator, and type the following commands (remember to hit ENTER on PC keyboard for each command for now on):
Code:
cd\c6
cd "adb fastboot"
adb devices
You MUST see something like:
Code:
List of devices attached
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
XXXXXXXXXXXXXXXXXXXX device
Where 'X' is the device serial number. If you don't see this, the drivers don't work for your device. You must search and find another somewhere. If everything is correct, keep fingers of one hand crossed and let's continue.
Phase 2: Unlock the bootloader:
In the same command prompt, type the following:
Code:
adb reboot bootloader
The phone will reboot, more drivers are installed, and you are presented with a black screen with "FASTBOOT mode" at bottom. To test if the drivers are ok, type:
Code:
fastboot devices
You MUST see something like this:
Code:
XXXXXXXXXXXXXXXX fastboot
Again, if you don't see, you must browse internet and find the drivers. If everithing is OK, type:
Code:
fastboot oem unlock
Go to the phone, you will see a warning. Accept it by hiting VOL+ key. The phone will change the screen, and your command prompt will confirm the unlock. CHECK TO SEE THE CONFIRMATION. Now, type:
Code:
fastboot reboot
The phone will reboot again, will appear "Erase data" (you lost your data here), and reboot again, new as hard reset. Let's confirm it is unlocked. Repeat the steps 1 to 3 from phase 1, and type:
Code:
adb reboot bootloader
Wait for the phone's black screen and type:
Code:
fastboot getvar all
In the results, search for "(bootloader) unlocked: yes". If you not find, or appears "no", stop reading now, and don't try anything else: this tutorial will not help you.
If you find, congratulations! You can now uncross your fingers and go to final phase! First, we need to reboot again. Type:
Code:
fastboot reboot
And wait the phone bootup.
Phase 3: Root!
Open Kingo Root as administrator
UNCKED install suggested apps
Click "ROOT"
Some seconds after, the phone will present a "Kingo Link" error. Just tap ok, and you can now go drink coffee or watter if your prefer. It will take a time, don't touch the phone.
If everything was OK, Kingo Root will present "Root Success" both on phone and PC. On the PC, you have a donate button. Why not?
Well, thats it. You can now disconnect your phone, close command prompt and use your root powers, but be warned: DON'T MESS WITH SYSTEM TOO MUCH, AS WE DON'T HAVE A ROM DOWNLOAD FOR NOW. UNINSTALL OR INTEGRATE MAY BE RISCKY, AS WELL DELETING FILES.
OBS.: Don't get fired, configure on the alarm NOW!
Don't forget to hit thanks if I help you.
MODS: Move this topic to the right section, please!

After root, I freezed the following, without any issues until now:
Android Live Wallpapers (I don't use)
arProcess (The annoyng move to page in settings. Disable it before freeze, as it comes with error after freeze)
Backup and Restore (I have my own backup)
Bagan keyboard (????)
Black Hole
Bubbles
Calculator (I have my own app)
Calendar (I have my own app)
cam.android.wallpaper.holospiral (I don't use)
DeskClock (I don't use)
Email (I don't use)
Exchange Services (I don't use)
Facebook (Know as memory drainer)
FWUpgrade (As this model hardly will have updates, I freeze it)
Google App (Know as memory drainer)
Internet (I prefer Chrome)
Maps (I don't use)
Music (I don't use)
MusicFX (I made some tests, and it is buggy or don't work. Disable audio enhancements in settings before freeze)
Phase Beam
Photo Screensavers
PicoTTS
Search (You may have to unfreeze, restart, and freeze again if your Google account desappears)
System Software Updates (Same as FWUpgrade above)
Todo (I don't use)
Updater (Same as FWUpgrade above)
Videos (I don't use)
Voice Recorder (I don't use)

Me dê uma ajuda por favor
Oi, sou brasileira e acredito que você também, então vou mandar essa mensagem em português.
Eu tenho um aparelho
Modelo: C6 Ultra
Fabricante: Sony
Dispositivo: gxq6580_weg_l
Hardware: mt6580
Quero muito instalar uma ROM pra ver se corrijo um erro que eu acabei cometendo, ele está funcionando normalmente, exceto o meu acesso ao Google Play e ao Google Play Service que acabei excluindo sem querer, tentei baixar os dois normalmente por arquivos apk jogados no celular e de nada adiantou.
Queria saber se tem e se é possível instalar uma ROM nova e se você poderia explicar o procedimento, se não, se tem algum jeito de baixar os gapps pro meu aparelho. Obrigada.

Related

Fake GPS location problems.

Hi, so sometimes i use the app called Fake GPS location that spoofs your real location.
But then one day i couldn't get my default location back that is calculated trough cellular tower and is shown trough other apps (Weather, Foursquare etc.)
I tried deleting data/cache to Fake GPS location and Google Maps even tried deleting Dalvik cache to no avail.
So does anyone have any solution to this thing please?
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5lY2xpcHNpbS5ncHNzdGF0dXMyIl0.
Try resetting your aGPS data and download the assistance data.
AlexWekell said:
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5lY2xpcHNpbS5ncHNzdGF0dXMyIl0.
Try resetting your aGPS data and download the assistance data.
Click to expand...
Click to collapse
Already have this app and tried reseting and then redownloading A-GPS data then reset my phone but still shows that fake location.
Do you think this is the problem with A-GPS data ?
Where the heck is even location data like for spoofing location stored in Android ?
I have no problem with the location sets, but i've another problem..
I use samsung galaxy mega 6.3 lte...my device keep turn on gps itself even i've already disable it on location svc setting on my device when i turn on wifi or mobile data..any chance to disable it or prevent it from auto run/run by itself?
I am with the same problem...
Followed this tutorial (http://windowspcguide.com/play-poke...-ios-iphone-ipad/comment-page-3/#comment-7144) and now I can't go back...
Someone could help me please?
Same problem here. Now fixed on Android.
Go to Settings > About the phone, then tap SEVEN times on "Compilation Number". Now you are in "Developer Mode". Go to Settings > Dev Options. Look for GPS "locations" and deselect "test/fake locations". That's it.
In Spanish:
Deshabilitar ubicaciones de prueba. Para Androides solamente, vaya a "Acerca del telefono" y luego pulse sobre el numero de compilacion 7 veces. Esto permitira entrar en las opciones de desarrollador. A partir de ahi vaya a Ajustes > Opciones del desarrollador, y abajo, donde pone "ubicaciones de prueba" desactivar ubicaciones de prueba. Eso es todo!
Friends this will work... First go to google maps then go to "you are place" option and in top right u have settings symbol.u will have " delete all locations history" select that and u will get u r original gps... Thank you...
Can anyone tell me which phns support fake GPS?
I never had an issue like that with this app bit.ly/gpsfaker It is the easiest app i've found out there to fake gps locations or routes.

[Q] G2-mini D625 LATAM, Development

I see that the development right now is focused on D620, D618, etc.
Here in Uruguay we have the D625 version -I think in Brazil, Chile, Mexico and Russia too- , I want to know if anybodie is working on this device, porting the work of Zaaap or something like this
Thank you in advance
Post your boot.img at @Zaaap72 's thread and he should be able to port CWM, TWRP and PhilZ to your device.
Sent from my D620R [Stock 4.4.2]
Thank you for your answer. I don't know the procedure to obtain that file but i am reading and trying to learn
EDIT: should Iobtain the boot.img from the .kdz file or directly from the device? could you suggest any good tutorial?
Thank you very much.
Sent from my GT-P5100 using XDA Free mobile app
You will need:
1. Root
2. Working adb (if you want to do this from your PC)
3. LG United drivers installed (Windows only)
Run the following (# are notes):
Code:
adb devices
#Make sure your device is in the list
adb shell
su
#Accept the prompt [b]on your device[/b]
dd if=/dev/block/platform/msm_sdcc.1/by-name/boot of=/sdcard/boot.img
exit
exit
#Yes, twice
Now, your boot.img is at your device's internal sd.
Sent from my D620R [Stock 4.4.2]
Thank you very much, i'm going to try next weekend
Vagelis1608 said:
You will need:
1. Root
2. Working adb (if you want to do this from your PC)
3. LG United drivers installed (Windows only)
Run the following (# are notes):
Code:
adb devices
#Make sure your device is in the list
adb shell
su
#Accept the prompt [b]on your device[/b]
dd if=/dev/block/platform/msm_sdcc.1/by-name/boot of=/sdcard/boot.img
exit
exit
#Yes, twice
Now, your boot.img is at your device's internal sd.
Sent from my D620R [Stock 4.4.2]
Click to expand...
Click to collapse
I'm having an error with this command:
Code:
[email protected]:/ # dd if=/dev/block/platform/msm_sdcc.1/by-name/boot of=/sdcard/boot.
img
cc.1/by-name/boot of=/sdcard/boot.img <
/dev/block/platform/msm_sdcc.1/by-name/boot: cannot open for read: No such file
or directory
As I can see in root explorer, I don't have that directory. Instead I have "/dev/block/platform/sdhci-tegra.3/by-name/" and in this folder I have some archives: APP, CAC, CST, DRM, DTB, FOT, LAF, LNX, MDA, MDM, MOS, MPT, MSC, PST, RCT, SEP, SNS, SOS, UDA, USP (somehow, this files have somekind of second name, like mmcblk0p8 in stuffs like that).
As you can see, I'm not close to be a developer so I really need help with this lol
cripii5 said:
I'm having an error with this command:
Code:
[email protected]:/ # dd if=/dev/block/platform/msm_sdcc.1/by-name/boot of=/sdcard/boot.
img
cc.1/by-name/boot of=/sdcard/boot.img <
/dev/block/platform/msm_sdcc.1/by-name/boot: cannot open for read: No such file
or directory
As I can see in root explorer, I don't have that directory. Instead I have "/dev/block/platform/sdhci-tegra.3/by-name/" and in this folder I have some archives: APP, CAC, CST, DRM, DTB, FOT, LAF, LNX, MDA, MDM, MOS, MPT, MSC, PST, RCT, SEP, SNS, SOS, UDA, USP (somehow, this files have somekind of second name, like mmcblk0p8 in stuffs like that).
As you can see, I'm not close to be a developer so I really need help with this lol
Click to expand...
Click to collapse
Sorry but I don't have your device so I don't know which one of these is the kernel. If there is a BOOT file, then thats it
The mmcblk0p* are the actual files, the files in /by-name/ are symlinks to those files
Well I found in another forum a way to obtain boot.img
Code:
dd if=dev/block/mmcblk0p5 of=/mnt/sdcard/boot.img
I did it and now I have a boot.img
https://www.dropbox.com/s/ws3rye41sierzq6/boot.img?dl=0
but I don't know if is the right one. I can't see a way to know how get it right for myself
Hi!
Did you have a unbanded firmware for our phone?
Mine is "VIVO" branded, i live in Brasil...
And the room is too laggy...
Thanks!
Sent from my LG-D625 using XDA Free mobile app
Its on lg's website, its posted around the forum also, i recommend you to root
it and take the crap apps out
Did you have the donwload link?
I've searched but dont found!
Thanks!
Sent from my LG-D625 using XDA Free mobile app
http://forum.xda-developers.com/showthread.php?p=55169575
vileladelima said:
Did you have the donwload link?
I've searched but dont found!
Thanks!
Sent from my LG-D625 using XDA Free mobile app
Click to expand...
Click to collapse
Take a look here http://forum.xda-developers.com/showpost.php?p=55804110&postcount=12
I'm using on my D625 VIvo.
joaolevysa said:
Take a look here http://forum.xda-developers.com/showpost.php?p=55804110&postcount=12
I'm using on my D625 VIvo.
Click to expand...
Click to collapse
What flsh totorial did you follow?
I tryed two, but none works!
Thanks
Que tutrial vc usou amigo?
Ja tentei dois, e outros não tive coragem de tentar (to meio azarado com celular esses dias e não quis arricar!).
Foi um q tem aqui no xda?
Flashear SAMSUNG é mais facil q LG viu! kkkkk
Valeu...
Obrigado!
joaolevysa said:
Take a look here http://forum.xda-developers.com/showpost.php?p=55804110&postcount=12
I'm using on my D625 VIvo.
Click to expand...
Click to collapse
Man, 4G working with this rom? I'm brazilian and i'm using vivo rom too. There are many unnecessary apps. which tutorial you followed for flashing? Thank you!
Cara, a conexão 4g está funcionando com essa rom? Eu uso a rom da VIVO também. São muitos apps desnecessários. Qual tutorial você seguiu para flashear? Aliás, depois que fazer root o aparelho não atualiza mais né? Basta flashear essa rom novamente caso saia alguma atualização importante? Obrigado!
anyone knows about the lollipop update for the d625?? I'm getting hopeless :crying::crying::crying:

Coolpad Rogue 3320A Stock Rom needed

I root my coolpad 3320A and added a custom boot animation and now it won't load past the animation is just shuts off. I can access the System Recovery menu but I need the stock rom to get it working again. Can someone help me please?
I'm bricked.
Softbricked my Coolpad Rogue 3320a with SuperSU.
My only options to fix are:
1. Finding someone with a 3320a who is willing to dump their working system.img and upload it for me, so I can download it and fastboot flash the working system.img, to overwrite my corrupted system.
2. Waiting for stock rom to be released.
3. Smashing it with a Hammer.
Someone please be kind/Knowledgeable enough to help.
I'm also in need of a stock rom for this phone!
I ordered a new one from Amazon yesterday,will upload some dumps if someone can help me through the process. Still waiting on mail though.
Update: Phone arrived 5 minutes ago!!!.
Uploading System.img (easily relflashable with fastboot)
ZepyhrHD said:
I root my coolpad 3320A and added a custom boot animation and now it won't load past the animation is just shuts off. I can access the System Recovery menu but I need the stock rom to get it working again. Can someone help me please?
Click to expand...
Click to collapse
You MAY be able to fix this without the entire stock ROM,you should be able to connect it to a pc via fastboot cable,and reflash whatever IMG you corrupted via adb/fastboot in CMD... Once I get the new phone in the mail,I will post a download link here in this thread. (May also include some instructions on the process for future rogue users)
Here ya go XDA,maybe this will help some of you.
(Might upload other partitions later,but not today)
Download System.IMG here:
http://ow.ly/Gx8t3042SMg
Instructions Included (Requires a basic understanding of adb)
Hi everyone.
Stock +KingRoot'ed Partition Dump as well as the OTA UPDATE zip available here:
https://www.androidfilehost.com/?w=files&flid=126528
(this is rooted w/KingRoot, if you want to tinker you may need to grab the stock install-recovery.sh (as trying to install update fails for this file among other things, just a side-effect of using KingRoot to root.
Another thing to work out for that could brick you - Kingroot does a chattr +ia on install-recovery.sh - If you try to install the update and immutable attributes are present the update will fail and you may be left with a boot loop.
Since there's no custom recovery, and I couldn't get this thing to goto fastboot (didn't try very hard though), may be out of luck if you get bricked...
I strongly recommend NOT taking/using the OTA, but I have provided it here since I know some people may want to inspect/manually install it. If you do want updated apps I'd pull them from the update manually...
I returned this phone after I did the dump, so I'll be of no further use with it... but I hope this helps.
-tronik
Guide please
Can you please guide me how to reflash stock image? My coolpad rogue is stuck at ''Download package'' And whenever I press the c=volume down button to ''cancel'' it restarts phone and goes right back to it
I'm having toubles flashing the system.img. I tried doing this:
fastboot flash system system.img
I get this error: target reported max download size of 268435456 bytes
Invalid sparse file format at header magi
and just hangs there and does nothing more
I had tried to redownload the file and re flashing but keep getting this error. If anyone is on please assist me on how to fix this if possible. I don't know if its the phone or fastboot that is having troubles.
*UPDATE* It sent its just takes a few minutes to send the system:cowboy
BIG BIG thanks to ApatheticEuphoria for the system.img i got my phone unbricked and working again
Phone
AustinGarrick1818 said:
I'm having toubles flashing the system.img. I tried doing this:
fastboot flash system system.img
I get this error: target reported max download size of 268435456 bytes
Invalid sparse file format at header magi
and just hangs there and does nothing more
I had tried to redownload the file and re flashing but keep getting this error. If anyone is on please assist me on how to fix this if possible. I don't know if its the phone or fastboot that is having troubles.
*UPDATE* It sent its just takes a few minutes to send the system:cowboy
BIG BIG thanks to ApatheticEuphoria for the system.img i got my phone unbricked and working again
Click to expand...
Click to collapse
How did you get yours to work? -VON
coolpad road 3320A sistema arruinado
Alguien que me pueda ayudar ise root en mi telefono, y luego actualize el software y se me arruino solo enciende en modo recovery ayudemme a ver si ago algo mal al poner la imagen por medio de fastboot ya que solo me aparece asi
Microsoft Windows [Versión 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Reservados todos los derechos.
C:\Program Files\Minimal ADB and Fastboot>fastboot devices
4348a67b fastboot
C:\Program Files\Minimal ADB and Fastboot>fastboot flash system system.img
error: cannot load 'system.img'
C:\Program Files\Minimal ADB and Fastboot>fastboot update system.img
W/ ( 1276): Unable to open 'system.img': No such file or directory
error: failed to open zip file 'system.img': I/O Error
bigguccivon said:
How did you get yours to work? -VON
Click to expand...
Click to collapse
Just download the system.img file and reboot to fastboot mode (it will show on screen information mode or similar) and run:
fastboot erase system
fastboot flash system system.img
jose1914 said:
Alguien que me pueda ayudar ise root en mi telefono, y luego actualize el software y se me arruino solo enciende en modo recovery ayudemme a ver si ago algo mal al poner la imagen por medio de fastboot ya que solo me aparece asi
Microsoft Windows [Versión 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Reservados todos los derechos.
C:\Program Files\Minimal ADB and Fastboot>fastboot devices
4348a67b fastboot
C:\Program Files\Minimal ADB and Fastboot>fastboot flash system system.img
error: cannot load 'system.img'
C:\Program Files\Minimal ADB and Fastboot>fastboot update system.img
W/ ( 1276): Unable to open 'system.img': No such file or directory
error: failed to open zip file 'system.img': I/O Error
Click to expand...
Click to collapse
Or do you have the system.img avalable ??

[Help] ADB Sideload: 'Cannot read update.zip'

I'm trying to flash stock and official firmware for my phone (axon7). I boot into the stock recovery where I select the option "ADB sideload".
My phone then says on the screen: "Usage: adb sideload <filename>".
When I run 'adb devices' the phone is recognized. There is only one phone connected to the computer so it's that one. However, when I try to sideload the update.zip file I get the really annoying message: Cannot read zip file.
ADB simply won't load the zip file and send it to the phone.
I run Windows 10 and use the minimalistic ADB tools. I've been trying for a few days now to get adb to work. Because my bootloader is locked and my phone is in bootloop. This means I can only sideload official zips that have the ZTE keys, or are signed by ZTE.
What I've tried:
- different adb drivers. (naked/google/universal etc...)
- different pc (also win10).
- renaming the file, putting file in same folder as adb.exe, trying 'update.zip.zip'.
- 'unblock' zip file in Richt-click -> properties of the file.
- drag and dropping the file into the command prompt.
- Elevated command prompt.
I really have no clue why this will not load the zip file. I must've done it a 100 times on my Oppo Find 7a, same way: right-clock to open CMD. 'adb devices', 'adb sideload update.zip'.
Online there are numerous topics about this dating from 2013 to about yesterday. No one seems to know the solution (for me). I'm hoping anyone here does.
Thanks in advance.
Eu tentei muitas coisa quebrei muito a cabeça tentando de tudo então renomeei o arquivo para rom.zip e depois iniciei o adb então digitei "adb devices " depois "adb sideload rom.zip.zip e deu certo :laugh:

Ultimate guide for K1 DVB-S2 S805 1G/8G + SlimROM

( I am not responsible for anything that goes wrong with your device if you flash this. I have taken as many steps possible to ensure top quality and am running this myself, but you have been warned!!)
This thread is for device K1 DVB-S2 S805 Quad Core 1G/8G
I created this guide to cover most important points regarding Root, Recovery and Installing custom roms. I also included my custom rom (SlimROM_k1_s805).
Rooting:
Download root file (M8_root_update.zip)
Copy file (M8_root_update.zip) to root directory of sd card or usb flash drive
Install the file though one of two methods:
A) Though Device update service:
Open Settings----Other----System Update----Update Locale----Select File
Browse to your file (M8_root_update.zip) and select it
Click on update button
Wait until finished and device reboot
B) Through Device Recovery:
Copy file (M8_root_update.zip) to root directory of sd card or usb flash drive
Unplug the tv box from electricity
Use a pin to press on reset button on the back of the device
Continue pressing on reset button and connect the electiricity cable (Do not release your finger yet)
Wait for about 10 seconds and release your finger
The device should boot into recovery now
Choose (install update from Ext)
Browse to root file on sd card ( M8_root_update.zip) and choose it
After finished installing click on (Reboot device now)
Installing TWRP Recovery:
Actually I did not find the exact twrp file for our device. So, I used another file for another model (S82b) . Use it under your responsibility. I confirmed it working with me in sections (Wipe, Mount and Install).
To install this recovery you need to follow these steps:
Make sure the device is rooted
Install Terminal emulator from google play
Download the recovery file (twrp-s82b.zip) and extract it to the root of your internal storage (Recovery.img)
Open terminal emulator and type the following commands:
su
dd if=/sdcard/recovery.img of=/dev/block/recovery
exit terminal emulator
you may now try the booting into recovery as mentioned before to make sure it works.
Installing Custom ROMs:
For developers, the most important step is to remove device identification from the rom script (updater-script).
Because the TWRP revovery is not for (K1). we must change the following line in updater-script:
getprop("ro.product.device") == "k1" || getprop("ro.build.product") == "k1" || abort("This package is for "k1" devices; this is a "" + getprop("ro.product.device") + "".");
replace (k1) with (s82b). it will be like this
getprop("ro.product.device") == "s82b" || getprop("ro.build.product") == "s82b" || abort("This package is for "s82b" devices; this is a "" + getprop("ro.product.device") + "".");
After that the rom can be installed easily from twrp recovery as mentioned before.
My Custom ROM (SlimROM_k1_s805)
Finally, I introduce my custom rom (SlimROM_k1_s805) which is built from stock rom for K1 DVB-S2 released 26 Jan 2016. I integrated root in my rom and removed too many apps that I do not use. Also, some build.prop tweaks.
If you need any file not included in my rom, go ahead and download the full rom and extract it to get what you want.
List of the files I have deleted:
system/kodipack.tar.gz
system/app/BasicDreams.apk
system/app/GenieWidget.apk
system/app/Gmail2.apk
system/app/GoogleCalendarSyncAdapter.apk
system/app/GoogleContactsSyncAdapter.apk
system/app/GoogleTTS.apk
system/app/Hangouts.apk
system/app/MediaBoxLauncher.apk (replaced with Nova Launcher)
system/app/MediaBoxLauncher.odex
system/app/PicoTts.apk
system/app/PicoTts.odex
system/priv-app/CalendarProvider.apk
system/priv-app/Contacts.apk
system/priv-app/ContactsProvider.apk
system/priv-app/Launcher2.apk
system/priv-app/talkback.apk
system/priv-app/Velvet.apk
system/preinstall/AirPin_LITE.apk
system/preinstall/anmaple.apk
system/preinstall/CloudTV.apk
system/preinstall/com.facebook.apk
system/preinstall/com.twitter.android.apk
system/preinstall/Crackle.apk
system/preinstall/FilmOn.apk
system/preinstall/flickr_3.1.2.apk
system/preinstall/hulu.plus-116.apk
system/preinstall/kodiapp-armeabi-v7a-debug.apk
system/preinstall/mobdro.apk
system/preinstall/Netflixv3.1.1build1112.apk
system/preinstall/sports.apk
system/preinstall/tdo.apk
Download Links:
Root:
https://drive.google.com/open?id=0B-Ki1hUVdsyYTzRlNVh2VW1sZzA
Recovery:
https://drive.google.com/open?id=0B-Ki1hUVdsyYYkFlRTZac3hSV2M
Stock ROM:
https://mega.nz/#!qJV2TCgQ!trCuhEodouMdRfY7GzeUTWxfhj1Z5wrCeN9_2StoPnA
My ROM (SlimROM):
http://www.mediafire.com/file/wd4w9bqgaizjes8/SlimROM_k1_s805.zip
XDA:DevDB Information
Ultimate guide for K1 DVB-S2 S805 1G/8G /SlimROM, ROM for the Android Stick & Console Computers
Contributors
akabawy
ROM OS Version: 4.4.x KitKat
Version Information
Status: Testing
Created 2016-09-28
Last Updated 2016-09-27
After installing TWRP Recovery, I can install SlimROM or required to install a custom ROM? That does not quite understand what to do here: Installing custom ROMs
Davids7777 said:
After installing TWRP Recovery, I can install SlimROM or required to install a custom ROM? That does not quite understand what to do here: Installing custom ROMs
Click to expand...
Click to collapse
After installing TWRP you can enter recovery by pressing reset button for 20 sec while booting
then you can do whatever you want ...
You can wipe data or do factory reset
or you can erase the whole system and install new custom rom
Does the recovery work with K1+ too?
Hi, is your SLIM ROM good for the DVB-T2 too? thank you
Hey my friend k2 dtv apk are very happy with your plans. Version with power vu. Please
This is version please added slim rom
http://s3.dosya.tc/server10/7r06ts/k2_dtv.zip.html
Cannot find root file on SD card or UDisk
Hi,
I know it's not a recent post but... it doesn't work
Point A : I reboot automatically to the recovery mode.
Point B : If I browse the SD Card, by "apply update from EXT", "SD CARD", I can't find the M8_root_update.zip file.
Please, can you help me ?
Matt.
Matelot_fr said:
Hi,
I know it's not a recent post but... it doesn't work
Point A : I reboot automatically to the recovery mode.
Point B : If I browse the SD Card, by "apply update from EXT", "SD CARD", I can't find the M8_root_update.zip file.
Please, can you help me ?
Matt.
Click to expand...
Click to collapse
re-download the root file
Try replacing your sd card and check it is formatted as fat32
hi
have ou test this rom, android 5.1 for k s805
http://freaktab.com/forum/tv-player...ols-ar/595768-rom-lollipop-acemax-vs-ki-abdul
can you add dtv?
thnks
akabawy said:
( I am not responsible for anything that goes wrong with your device if you flash this. I have taken as many steps possible to ensure top quality and am running this myself, but you have been warned!!)
This thread is for device K1 DVB-S2 S805 Quad Core 1G/8G
I created this guide to cover most important points regarding Root, Recovery and Installing custom roms. I also included my custom rom (SlimROM_k1_s805).
Rooting:
Download root file (M8_root_update.zip)
Copy file (M8_root_update.zip) to root directory of sd card or usb flash drive
Install the file though one of two methods:
A) Though Device update service:
Open Settings----Other----System Update----Update Locale----Select File
Browse to your file (M8_root_update.zip) and select it
Click on update button
Wait until finished and device reboot
B) Through Device Recovery:
Copy file (M8_root_update.zip) to root directory of sd card or usb flash drive
Unplug the tv box from electricity
Use a pin to press on reset button on the back of the device
Continue pressing on reset button and connect the electiricity cable (Do not release your finger yet)
Wait for about 10 seconds and release your finger
The device should boot into recovery now
Choose (install update from Ext)
Browse to root file on sd card ( M8_root_update.zip) and choose it
After finished installing click on (Reboot device now)
Installing TWRP Recovery:
Actually I did not find the exact twrp file for our device. So, I used another file for another model (S82b) . Use it under your responsibility. I confirmed it working with me in sections (Wipe, Mount and Install).
To install this recovery you need to follow these steps:
Make sure the device is rooted
Install Terminal emulator from google play
Download the recovery file (twrp-s82b.zip) and extract it to the root of your internal storage (Recovery.img)
Open terminal emulator and type the following commands:
su
dd if=/sdcard/recovery.img of=/dev/block/recovery
exit terminal emulator
you may now try the booting into recovery as mentioned before to make sure it works.
Installing Custom ROMs:
For developers, the most important step is to remove device identification from the rom script (updater-script).
Because the TWRP revovery is not for (K1). we must change the following line in updater-script:
getprop("ro.product.device") == "k1" || getprop("ro.build.product") == "k1" || abort("This package is for "k1" devices; this is a "" + getprop("ro.product.device") + "".");
replace (k1) with (s82b). it will be like this
getprop("ro.product.device") == "s82b" || getprop("ro.build.product") == "s82b" || abort("This package is for "s82b" devices; this is a "" + getprop("ro.product.device") + "".");
After that the rom can be installed easily from twrp recovery as mentioned before.
My Custom ROM (SlimROM_k1_s805)
Finally, I introduce my custom rom (SlimROM_k1_s805) which is built from stock rom for K1 DVB-S2 released 26 Jan 2016. I integrated root in my rom and removed too many apps that I do not use. Also, some build.prop tweaks.
If you need any file not included in my rom, go ahead and download the full rom and extract it to get what you want.
List of the files I have deleted:
system/kodipack.tar.gz
system/app/BasicDreams.apk
system/app/GenieWidget.apk
system/app/Gmail2.apk
system/app/GoogleCalendarSyncAdapter.apk
system/app/GoogleContactsSyncAdapter.apk
system/app/GoogleTTS.apk
system/app/Hangouts.apk
system/app/MediaBoxLauncher.apk (replaced with Nova Launcher)
system/app/MediaBoxLauncher.odex
system/app/PicoTts.apk
system/app/PicoTts.odex
system/priv-app/CalendarProvider.apk
system/priv-app/Contactos.apk
system/priv-app/ContactsProvider.apk
system/priv-app/Lanzador2.apk
system/priv-app/talkback.apk
system/priv-app/Velvet.apk
sistema/preinstalación/AirPin_LITE.apk
sistema/preinstalar/anmaple.apk
sistema/preinstalación/CloudTV.apk
sistema/preinstalación/com.facebook.apk
sistema/preinstalar/com.twitter.android.apk
sistema/preinstalación/Crackle.apk
sistema/preinstalación/FilmOn.apk
sistema/preinstalación/flickr_3.1.2.apk
sistema/preinstalación/hulu.plus-116.apk
sistema/preinstalación/kodiapp-armeabi-v7a-debug.apk
sistema/preinstalación/mobdro.apk
sistema/preinstalación/Netflixv3.1.1build1112.apk
sistema/preinstalación/deportes.apk
sistema/preinstalación/tdo.apk
Descargar enlaces:
Raíz:
https://drive.google.com/open?id=0B-Ki1hUVdsyYTzRlNVh2VW1sZzA
Recuperación:
https://drive.google.com/open?id=0B-Ki1hUVdsyYYkFlRTZac3hSV2M
ROM de stock:
https://mega.nz/#!qJV2TCgQ!trCuhEodouMdRfY7GzeUTWxfhj1Z5wrCeN9_2StoPnA
Mi ROM (SlimROM):
http://www.mediafire.com/file/wd4w9bqgaizjes8/SlimROM_k1_s805.zip
[NORMAL]XDA:Información de DevDB[/NORMAL]
Guía definitiva para K1 DVB-S2 S805 1G/8G /SlimROM, ROM para Android Stick & Console Computers
Colaboradores
akabawy
ROM OS Versión: 4.4.x KitKat
Información de versión
Estado: Prueba
Creado 2016-09-28
Última actualización 2016-09-27
Click to expand...
Click to collapse
Ha te agradezco lo anterior, pero lastimosamente no me da desde la memoria sd, ya que este se quedo apagado, lo que si es que me lo detecta el pc con el programa usb burner tool, pero no he encontrado la imagen ya que este es un dispositivo q maneja tdt, si depronto lo tienes te lo agradezco, quedo atento
Mod translation: I thank you for the above, but unfortunately it does not give me from the sd memory, since it was turned off, what if the pc detects it with the usb burner tool program, but I have not found the image since this is a device that handles tdt, if you suddenly have it, I'll thank you, I'll stay tuned
fercho1024 said:
Ha te agradezco lo anterior, pero lastimosamente no me da desde la memoria sd, ya que este se quedo apagado, lo que si es que me lo detecta el pc con el programa usb burner tool, pero no he encontrado la imagen ya que este es un dispositivo q maneja tdt, si depronto lo tienes te lo agradezco, quedo atento
Mod translation: I thank you for the above, but unfortunately it does not give me from the sd memory, since it was turned off, what if the pc detects it with the usb burner tool program, but I have not found the image since this is a device that handles tdt, if you suddenly have it, I'll thank you, I'll stay tuned
Click to expand...
Click to collapse
KI Pro DVB-S2/T2/C [Android] - 4PDA
KI Pro DVB-S2/T2/C [Android], [ТВ-ресивер][AMLogic S905D]
4pda.to

Categories

Resources