Hello, im in terrible situation, my huawei y300-0100 is stucked in bootloader, i can access the recovery but it doesnt flash any firmware that i tried . including 175 and 189 general firmware. i knew the bootloader is locked so i requested the unlock code from huawei but in fastboot oem unlock code restarts the mobile and it gets stucked in tho the bootloader again.
the emmc is readonly and hence cant update. please tell me what to do.
is there a way to flash the firmware by adb, ? the adb , fastboot and sideload all are working but it doesnt write any changes to the emmc.
if the post is in wrong category please forgive me, although i have been a regular user , this is my first post.
Thank you , any help is appreciated.
Hello.
I have one soft bricked Huawei G526-L11 with locked bootloder. I try to unlock bootloader, but I don't know what is product ID for this model.
I calculate bootloader password on web page, I enter product ID of different model. Last time it worked. Now I enter calculated password but not work.
So, what is product code for this model? Or maybe someone generate me right code.
my phone IMEI is: 860286020552000
and S/N: J7Q0214117001736
I calculated this password: 8119052225239128.
i also need help
Guys please help me
Myphonedoes not boot it is in fastboot mode
It hangs at logo
I can't obtain the product ID from
Webpage Bootlodre Unlocking
Requesting help from company owner
Whom we expect to stand by their products
please send me the product ID or
Bootloader code
details;
Model: Huawei Ascend G630-U10
IMEI1: 867256029325206
IMEI2: 867256029360211
Serial NO: H3L7S15925003594
Please send me the product ID
i cant obtain it by sending email on huawei
support website
Hello everyone!
My Huawei Mediapad 10 Link+ (S10-231u) has stuck on the boot logo, and I can only access fastboot mode (no recovery, not even dload installation). However, the bootloader is locked, preventing me from flashing new images and fixing the tablet.
I have, of course, the Serial Nr. and the IMEI, but Huawei's Unlock Page doesn't let me proceed without the Product ID, which I can't find, since I can't boot into System. Is there any way to find the Product ID, or to get the bootloader unlock code without it?
Thanking you in advance for any help!
uriaman1 said:
Hello everyone!
My Huawei Mediapad 10 Link+ (S10-231u) has stuck on the boot logo, and I can only access fastboot mode (no recovery, not even dload installation). However, the bootloader is locked, preventing me from flashing new images and fixing the tablet.
I have, of course, the Serial Nr. and the IMEI, but Huawei's Unlock Page doesn't let me proceed without the Product ID, which I can't find, since I can't boot into System. Is there any way to find the Product ID, or to get the bootloader unlock code without it?
Thanking you in advance for any help!
Click to expand...
Click to collapse
same problem here i can only enter on fastboot mode
Did you find any solution
traumakom said:
same problem here i can only enter on fastboot mode
Click to expand...
Click to collapse
Hi: I'm still stuck in the same problem, but with S10-231L device. Were you able to find any solution for this?
Much appreciated.
Hello experts i am facing a real problem with my huawei y6 pro.
i want to Root my phone for this propose i setup adb on my PC,i connect my device in fastboot mode open cmd in adb,then i write the command as below,
fastboot oem unlock .....code here..
After pressing enter a confirmation was on the mobile screen about unblocking bootloader i Confirmed it then in cmd it shows that unlock successful.when i boot the phone my whole data was erased, so i was hopeful that now Root apps will work on my phone i tried kingroot app but it was still showing "Root strategy unavailable"
After it i planned to install custom recovery( i had a recovery for mtk devices)via fastboot mode ,i copy the recovery.img file to my adb folder rebooted my phone to fastboot and tried this command
"fastboot flash recovery recovery.img"
It shows succeeded,
But when i tried to boot into recovery it was stock recovery,
Please experts help me what can i do now??
Sent from my HUAWEI TIT-AL00 using XDA Forums
prior the flash try
fastboot erase recovery
then flash it
yasitoo said:
prior the flash try
fastboot erase recovery
then flash it
Click to expand...
Click to collapse
Thanks for reply i tried it ,
It shows ,
"Erasing ,recovery,...
Failed <remote: unknown command>
Finished. Total time:0.009s"
Sent from my HUAWEI TIT-AL00 using XDA Forums
Tajamal said:
Thanks for reply i tried it ,
It shows ,
"Erasing ,recovery,...
Failed <remote: unknown command>
Finished. Total time:0.009s"
Sent from my HUAWEI TIT-AL00 using XDA Forums
Click to expand...
Click to collapse
i'm not pro but you may have bad drivers or device is not completely unlocked,
try to completely uninstall any adb/device driver on your pc and install those ones,
besides that, check if device is detected with this command
Code:
fastboot -l devices
then try again with
Code:
fastboot erase recovery
fastboot flash recovery recovery.img
goodluck.
yasitoo said:
i'm not pro but you may have bad drivers or device is not completely unlocked,
try to completely uninstall any adb/device driver on your pc and install those ones,
besides that, check if device is detected with this command
Code:
fastboot -l devices
then try again with
Code:
fastboot erase recovery
fastboot flash recovery recovery.img
goodluck.
Click to expand...
Click to collapse
I guess my phone's bootloader is not unlocked actually i was unable to find unlock code because huawei website was showing an error i ask about this problem in open forum a person ask me to provide him imei+product ID i give it to him then he give me unlock code and i think problem is caused by wrong code the command is just erasing my memory but bootloader is still locked,
So can you help me to find unlock code?
Here is my mobile information
Serial Number
#AVY9KA9631123629
IMEI#******************
Product ID #11680402
Sent from my HUAWEI TIT-AL00 using XDA Forums
Tajamal said:
I guess my phone's bootloader is not unlocked actually i was unable to find unlock code because huawei website was showing an error i ask about this problem in open forum a person ask me to provide him imei+product ID i give it to him then he give me unlock code and i think problem is caused by wrong code the command is just erasing my memory but bootloader is still locked,
So can you help me to find unlock code?
Here is my mobile information
Serial Number
#AVY9KA9631123629
IMEI#***********
Product ID #11680402
Sent from my HUAWEI TIT-AL00 using XDA Forums
Click to expand...
Click to collapse
don't give your imei like that for anyone asking for it, besides that, ican't help you with the unlock code, you would better contact huawei to get the code or resolve the error,
PS : i suggest you to remove your imei from post.
yasitoo said:
don't give your imei like that for anyone asking for it, besides that, ican't help you with the unlock code, you would better contact huawei to get the code or resolve the error,
PS : i suggest you to remove your imei from post.
Click to expand...
Click to collapse
Bundle of thanks brother i will try again from huawei website,
Actually i am from Pakistan & here is a lot of websites are blocked that why i was asking to you,if you could try it for me from your internet it will resolve my issue,
Sent from my HUAWEI TIT-AL00 using XDA Forums
Bootloader unlock failed in my huawei y6 pro TIT-AL00 plzzz help me
00saravana said:
Bootloader unlock failed in my huawei y6 pro TIT-AL00 plzzz help me
Click to expand...
Click to collapse
How did you try to unlock your phones bootloader?
There is no need of unlocking code just command " fastboot oem unlock" and that's it now check your boot loader status with command on fastboot and it Will show you unlocked,
But there is no benefits to unlock this phone you will never find a Root solution for this phone,so it is recommended from me that stay with locked phone,& if you found any suitable custom ROM just flash it with PC without backup,other then that so far i didn't found any safe solution.
Sent from my HUAWEI TIT-AL00 using XDA Forums
hi i am from india and huge fan of huawei i got this phone from usa(mt2-l03) i rooted the phone using some one click root tool and tried to flash twrp which ended in saying recovery image failed,please update to the authorized images.however as there was was root i changed the dpi(think 420) now the phone screen is blank(only in the system ui not the boot image or vendor image(huawei)) i am having the imei and s/n at the battery but i dont have the product id so is there any way i can get the product id and unlock the bootloader of my phone or is there any way to repair my phone