Related
Im trying to use Tasker app, but it needs to enabled on "Accessibility" android config
The problem is my Accessibility cannot be accessed because a long time when i removed some lg g2 bloatwares but i removed some wrong system apps
So.. can i enable Tasker on accessibility using ADB?
Any tip?
Thanks!
Please any tip?
Hello. Just for references, as it is one of the first results shown in DuckDuckGo, this worked for me:
Code:
adb shell settings put secure enabled_accessibility_services packagname/servicename
Source: https://stackoverflow.com/a/38939299
Hi Guys,
A lot of us are getting new devices that are not yet supported by developers or will never be supported and rooting new devices now a days is getting harder, that's why methods requiring no root are essential.
I was pointed to by @EMJI79 to the original thread of this method by @luisshnyder. Great thanks to both of them. :good:
Requirements:
* ADB and Fastboot installed on PC or Mac.
Instructions:
Type without quotations in CMD or Windows PoweShell(use ".\"before command in PowerShell):
"adb shell wm overscan 0,0,0,-202"
Notes:
1. Make sure to use an alternative navigation app before doing this.
2. To change the height change the values between (0 to -210)see what suits your screen best(for me it was -202).
3. The effect sticks after reboot.
4. To return to normal type without quotations: "adb shell wm overscan 0,0,0,0"
5. This works on all Android versions Oreo and before, it also works on many devices.
6. There are minor bugs stated by the original thread so check them out if you have any, i haven't encountered any yet except you wouldn't be able to see the camera & voice shortcuts in the lock screen.
Finally it's best to combine this with hiding the status bar too, so type afterwards without quotations:
"adb shell settings put global policy_control immersive.status=*"
-If you want to customize on per app basis follow my other guide.
Good Luck!
I can confirm that using the old method of disabling the navigation bar(qemu.hw.mainkeys=1) from the build.prop is working fine with the April security update, also Google now on tap works fine without getting the force close error message.
This guide is rendered useless for users that can access the build.prop. ?
Thank you so much for sharing this, I've been searching for a way to completely hide the navbar without Root. Now Gesture Control can actually be used as intended. ?
My gesture non root setup I wish Google will implement.
Rashad83 said:
I can confirm that using the old method of disabling the navigation bar(qemu.hw.mainkeys=1) from the build.prop is working fine with the April security update, also Google now on tap works fine without getting the force close error message.
This guide is rendered useless for users that can access the build.prop. ?
Click to expand...
Click to collapse
is there any command that enables the navbar on navbar disabled devices?
zohaibahd said:
is there any command that enables the navbar on navbar disabled devices?
Click to expand...
Click to collapse
Use this app https://play.google.com/store/apps/details?id=tw.com.daxia.virtualsoftkeys
For Redmi S2
adb shell wm overscan 0,0,0,-82
ishtiaqe22 said:
For Redmi S2
adb shell wm overscan 0,0,0,-82
Click to expand...
Click to collapse
Im also on redmi s2 running lineage os and 0,0,0,-97 works better for me
is there a way to do the same thing as : "adb shell wm overscan 0,0,0,-202" but for the status bar.
this worked great for my nav bar- but i dont wnt to completely remove the status bar, just move it up a little.
thanks for the respond.
Dear @Rashad83 and other Contributors!
Thank your for this little summary thread, I hope I am not necrobumping right now. I just wanted you to know, that this method is still working flawlessly. My settings for the Umidigi S5 Pro (Android 10): ,,wm overscan 0,0,0,-48"
have anyone tried this on umidigi bison?
infelizmente esse comando não funciona no galaxy s20 android 13
no meu s8 android 10
funciona bem
I'm using the Chinese Find X, and when I try to give permission to an app to use WRITE_SECURE_SETTINGS via ADB.
I enter this:
adb shell pm grant it.simonesestito.ntiles android.permission.WRITE_SECURE_SETTING
and am met with:
Operation not allowed: java.lang.SecurityException: grantRuntimePermission: Neither user 2000 nor current process has android.permission.GRANT_RUNTIME_PERMISSIONS.
I have never had this problem with a phone, Chinese ROM or not.
I also tried enabling immersive mode, and received:
Security exception: Permission denial: writing to settings requires:android.permission.WRITE_SECURE_SETTINGS
I couldn't find anything on Google. Can anybody help me out?
tyia
The more you dig into Chinese rom, the sooner you will find that Chinese android sys is not android, it's AnZhuo......
Apparently, the permission is removed for this operation.
You have to turn off the last security option in dev mode on your X. Did not remeber the name.
dragon-tmd said:
You have to turn off the last security option in dev mode on your X. Did not remeber the name.
Click to expand...
Click to collapse
hi, same problem here. Where can I find the "last security option" - what does it mean? Don´t have any idea to solve it
In developer options, enable "USB Debugging (Security settings). If you do not know how to enable developer options in android, search google.
last option in dev mode : Disable permission monitoring
abidalishakir.khan said:
In developer options, enable "USB Debugging (Security settings). If you do not know how to enable developer options in android, search google.
Click to expand...
Click to collapse
Thank you, sir. Spot on!
Worked on realme 3 pro too.!!
stutoni said:
last option in dev mode : Disable permission monitoring
Click to expand...
Click to collapse
Thanks sir/ma'am ??
stutoni said:
last option in dev mode : Disable permission monitoring
Click to expand...
Click to collapse
Thanks! Worked on my Reno 10x Zoom.
stutoni said:
last option in dev mode : Disable permission monitoring
Click to expand...
Click to collapse
Thanks, you save my day
Thanks
abidalishakir.khan said:
In developer options, enable "USB Debugging (Security settings). If you do not know how to enable developer options in android, search google.
Click to expand...
Click to collapse
This has helped all the devices running ColourOS like my Realme U1. Thanks anyway
stutoni said:
last option in dev mode : Disable permission monitoring
Click to expand...
Click to collapse
cheers man i was wondering why i kept having issues with battery_stats for my reno z and this fixed it.
abidalishakir.khan said:
In developer options, enable "USB Debugging (Security settings). If you do not know how to enable developer options in android, search google.
Click to expand...
Click to collapse
thanks. It worked on a Mi Note 10 lite
erase & format....
Good morning/noon/afternoon and evening... Just asking if there is a easy way to activate the oppo find x PAFM00 version after erasing data and reformat then the device lock and forgot the oppo id to activate? thanks...
thanks from oppo F9 users
stutoni said:
last option in dev mode : Disable permission monitoring
Click to expand...
Click to collapse
Thank you so much.
stutoni said:
last option in dev mode : Disable permission monitoring
Click to expand...
Click to collapse
Thank you. Spot on!
I kept getting this error, despite enabling USB debugging, and able to connect with adb shell. And by disabling the permission monitoring setting, I can change the Android settings now, and this is for Realme C2.
adityakar said:
Thanks! Worked on my Reno 10x Zoom.
Click to expand...
Click to collapse
Didn't work for my oppo f9 pro ,COLORos ,also have disable permission monitoring but still same issue I don't know why I tried to grant permission once before after enabling that disable permission monitoring option and it worked but am doing that again after a couple of days but idk why it doesn't work even after enabling that option now,btw I am trying to use root tiles in quick settings and through adb I wanna grant the permissions to use root needing tiled to be enabled
Kang saab6 said:
Didn't work for my oppo f9 pro ,COLORos ,also have disable permission monitoring but still same issue I don't know why I tried to grant permission once before after enabling that disable permission monitoring option and it worked but am doing that again after a couple of days but idk why it doesn't work even after enabling that option now,btw I am trying to use root tiles in quick settings and through adb I wanna grant the permissions to use root needing tiled to be enabled
Click to expand...
Click to collapse
did you find a solution?
Version for Marshmallow is available here: https://forum.xda-developers.com/t/...zation-for-old-touchwiz-mm-framework.3372401/
Version for Nougat is available here: https://forum.xda-developers.com/t/...stomization-for-touchwiz-n-framework.3692391/
Version for Oreo is available here: https://forum.xda-developers.com/t/...stomization-for-touchwiz-o-framework.3749479/
Version for Pie is available here: https://forum.xda-developers.com/t/...-14-customize-samsung-oneui-24-05-20.3908114/
Version for Q is available here: https://forum.xda-developers.com/t/...customize-samsung-oneui-2-0-30-12-20.4044757/
Version for R is available here: https://forum.xda-developers.com/t/...customize-samsung-oneui-3-x-14-03-21.4212051/
Firefds Kit [ S ]
Xposed module for Samsung S devices.
Known working devices:
Galaxy S20
Galaxy S20
Galaxy S10
Features
The module has the following features:
Fake system status to Official
Custom advanced power menu options:
Power off
Restart
Emergency mode
Recovery (with custom text)
Download
Data mode switch
Screenshot
Switch User (when multi user is enabled)
SystemUI restart
Flashlight
Screen Recorder (requires Samsung screen recorder app installed)
Disable restart confirmation
Enable performing power menu reboot / power off actions only after unlocking secure lock screen (stock behavior)
Disable display of power menu when secure lockscreen is locked
Change default behavior of reboot to reboot to recovery
Replace Reboot to Recovery icon with system default restart icon
Enable call recording and call recording settings
Replace add call button instead of call recording and adding record by menu option
Clock Size option
Enable Call ID and spam protection option
Enable Screen Record tile and Settings options
Enable screen record while in call
Enable additional advanced hotspot settings option
Hide VoLTE icon in status bar
Hide persistent USB connection notification
Hide persistent charging notification
Enable block phrases in messages app settings
Enable native blur on notification panel pull down
Enable multi user toggle
Set max user value selector
Show seconds in status bar clock toggle
Show AM/PM for seconds on clock toggle
Show clock date on right of clock toggle
Add date to status bar clock options
Enable fingerprint unlock on reboot toggle
Enable biometrics unlock on reboot toggle
Add network speed menu to show network speed in the status bar
Data icon symbol selection (4G, LTE, 4G+, 4.5G)
Show Data usage view in quick panel
Double tap for sleep
Hide NFC icon
Disable Bluetooth toggle popup
Disable sync toggle popup
Disable high level brightness popup
Hide carrier label
Carrier label size selection
Disable loud volume warning
Disable volume control sound
Disable low battery sound
Screen timeout settings
NFC behavior settings
Auto MTP
Disable camera temperature check
Enable camera shutter sound menu
Disable call number formatting
Disable SMS to MMS threshold
Force MMS connect
Bypass exchange security (currently not working)
Disable signature check
Disable secure flag
Attention
This version was tested by the community and not by me, as I don't have an Android 12 Samsung device.
THERE COULD BE BUGS/CRASHES/BOOTLOOPS, but it's pretty stable.
Please upload any xposed logs when you encounter any issue. I can't help you without the logs!
Installation
To install this module you need the following apps and modules installed on your device:
Magisk v24.0 and above - https://github.com/topjohnwu/Magisk/releases
Option 1 - Zygisk
LSPosed Magisk Zygisk Release module v1.8.2 and above - https://github.com/LSPosed/LSPosed/releases
Option 2 - Riru
LSPosed Magisk module v1.8.2 and above - https://github.com/LSPosed/LSPosed/releases
Riru Magisk module v25.0.0 and above - https://github.com/RikkaApps/Riru/releases
Download
Directly from LSPosed Manager or from Github : https://github.com/Xposed-Modules-Repo/sb.firefds.s.firefdskit/releases
Source Code
https://github.com/Firefds/FirefdsKit/tree/S
Known Issues
A lot has changed since Android 11. Since I don't have an Android 12 device all tests have been done with various testers. THERE MAY BE UNKNOWN ISSUES!!
Some features are removed on purpose. Since GravityBox has been working on Samsung Oreo devices without much issues, I only implemented features that need special Samsung coding.
Reporting Issues
When reporting an issue, please include Xposed logs and screenshots if any. Reporting should be done through Github - https://github.com/Firefds/FirefdsKit/issues
External Libraries
The project uses the following libraries:
https://github.com/rovo89/XposedBridge
https://github.com/rovo89/XposedMods/tree/master/XposedLibrary
Samsung framework libraries which are used for compile only
EdXposed Whitelisting
Users who want to use EdXposed's whitelist feature should whitelist the following apps:
Android System - android
Call - com.samsung.android.incallui
Call Settings - com.samsung.android.app.telephonyui
Camera - com.sec.android.app.camera
Contacts - com.samsung.android.contacts
Email - com.samsung.android.email.provider
Firefds Kit - sb.firefds.s.firefdskit
Messaging - com.samsung.android.messaging
MTP Application - com.samsung.android.MtpApplication
NFC - com.android.nfc
One UI Home - com.sec.android.app.launcher
Settings - com.android.settings
Smart Capture - com.samsung.android.app.smartcapture
Software Update - com.wssyncmldm
System UI - com.android.systemui
Credits
This module wouldn't have been here without the following people:
RikkaW - Creator of Riru Magisk module, which provides a way to inject codes into zygote process
@rovo89 - Creator of the original Xposed framework APIs
solohsu and MlgmXyysd - Creators of the EdXposed Magisk module and Installer that made all of this possible
@C3C076 - Creator of GravityBox Xposed modules, which I learnt a lot from
@wanam - Creator of the original XTouchWiz module, which this module is based on.
@topjohnwu - Creator of Magisk
@AbrahamGC - For the Extended Power Menu - Pie - Odex framework Smali guide
Big thank you to @m8980 and @ianmacd for testing countless versions and sending xposed logs
Telegram
Announcements and pre release versions - https://t.me/firefdskit
This is a moded version of Wanam's XTouchWiz:
https://github.com/wanam/XTouchWiz
Hi @firefds, thanks a lot for releasing your module for Android 12! Highly appreciated!
Also thanks to @m8980 and @ianmacd for doing the testing!
The module is working very well on my S10e, although I have to admit that - since I'm on a custom ROM - I don't need all features and only use the Double Tap For Sleep function and the Advanced Power Menu.
There's one optical issue in the Advanced Power Menu that I would like you to fix: The additional icons for Recovery Mode, Download Mode and Restart SystemUI don't match the style of the original Samsung icons for Power Off and Restart, i.e. they have a different line thickness and use a font that's not consistent with the look of One UI 4.0.
I made a screenshot of how it looks with the current icons and an edited version of the screenshot of how IMHO it should look like, please see attached files.
For this I extracted the three PNG images from the res folder of your APK and edited them to match the look of One UI 4.0: I combined the shape of the restart icon, the colour of the original icons and added the Letters "R", "D" and "UI" with the Google Sans font, which is the standard system font of Android 12.
I attached the edited PNG images, so you can easily put them into your module.
I hope that you like the new icons and am looking forward for an updated version of your module. Thanks!
okij said:
Hi @firefds, thanks a lot for releasing your module for Android 12! Highly appreciated!
Also thanks to @m8980 and @ianmacd for doing the testing!
The module is working very well on my S10e, although I have to admit that - since I'm on a custom ROM - I don't need all features and only use the Double Tap For Sleep function and the Advanced Power Menu.
There's one optical issue in the Advanced Power Menu that I would like you to fix: The additional icons for Recovery Mode, Download Mode and Restart SystemUI don't match the style of the original Samsung icons for Power Off and Restart, i.e. they have a different line thickness and use a font that's not consistent with the look of One UI 4.0.
I made a screenshot of how it looks with the current icons and an edited version of the screenshot of how IMHO it should look like, please see attached files.
For this I extracted the three PNG images from the res folder of your APK and edited them to match the look of One UI 4.0: I combined the shape of the restart icon, the colour of the original icons and added the Letters "R", "D" and "UI" with the Google Sans font, which is the standard system font of Android 12.
I attached the edited PNG images, so you can easily put them into your module.
I hope that you like the new icons and am looking forward for an updated version of your module. Thanks!
Click to expand...
Click to collapse
Thanks! This looks great! I'll add it to the next version
firefds said:
Thanks! This looks great! I'll add it to the next version
Click to expand...
Click to collapse
Thanks! I'm glad you like it and look forward to the next version.
IIRC Firefds Kit 11 uses the same icons (I have been using it until I switched to Android 12 two months ago), so you might use the new icons there too.
Thanks.
All my devices now bootloop with NoClassDefFoundError: com.android.systemui.BasicRune
Any chance we could add those whitelists to LSposed "Recommended"? Exactly the most important call recording check is missing.
Btw if LSposed 1.7.2 is installed, Riru can be uninstalled? -> looks like Sui uses Riru, so no switching.
In the end, I could leave Firefds enabled if I don't change anything, luckily call recording is on by default.
Thanks for the update for Android 12. Everything working good on my A52s 5g. Hope that one day you can add the ability to adjust the height of the navigation bar. That was available in the gravitybox app but there is no upgrade for 12 yet and not sure there will be which is why I've asked here... appreciate your efforts though.
Is there an easy way to fix bootloop in case something went wrong?
donkeyman1234 said:
Is there an easy way to fix bootloop in case something went wrong?
Click to expand...
Click to collapse
You can go in twrp to /data/ app/ then sort folder of date and first one should be folder with firefds app and for me delete it worked and I didn't have to disable lsposed modules or the magisk
Kuba1996 said:
You can go in twrp to /data/ app/ then sort folder of date and first one should be folder with firefds app and for me it worked and I didn't have to disable lsposed modules or the magisk
Click to expand...
Click to collapse
Thanks, but I mean if no twrp I can't boot into the phone, only stock recovery . Is there anything I can do( not factory reset)?
donkeyman1234 said:
Thanks, but I mean if no twrp I can't boot into the phone, only stock recovery . Is there anything I can do( not factory reset)?
Click to expand...
Click to collapse
Do You have oem unlock and debbuging on? If yes You can install twrp. Or mabye try sideload something like recovery arome file manager (possible working only in twrp). How You root without custom recovery?
How to disable Magisk modules without Magisk and TWRP recovery
Hi, I installed an incompatible Magisk module in the past, which cause bootloop of my phone. Co I dirty flashed my ROM (Pixel Experience) to get my phone work again. My current situation is that I cannot flash Magisk because an incompatible...
forum.xda-developers.com
You can look at last post here and try do something like that. Mabye try in recovery choose "update from adb" and try erase with adb command (your directory: riru-core). Or try use this but I dont think it will work
[Tool][Aroma] Magisk Manager Recovery Tool V2.5
Warning: It's not a Magisk module! Description This is a Magisk module management tool that can be used in Recovery mode. It's based on Aroma Installer. You can manage almost everything in Magisk with this tool. You can manage installed modules...
forum.xda-developers.com
Kuba1996 said:
Do You have oem unlock and debbuging on? If yes You can install twrp. Or mabye try sideload something like recovery arome file manager (possible working only in twrp). How You root witchout custom recovery?
Click to expand...
Click to collapse
I used magisk patched AP file to root. There is no twrp for s22u.
donkeyman1234 said:
I used magisk patched AP file to root. There is no twrp for s22u.
Click to expand...
Click to collapse
Also You can flash in odin patched ap and rest of file but with HOME_CSC not CSC
Check this:
donkeyman1234 said:
I used magisk patched AP file to root. There is no twrp for s22u.
Click to expand...
Click to collapse
Had the same issue with my s22u. I reflashed through odin. Gonna try and flash this module again with magisk bootloop protector. fingers crossed.
Update
Did try flashing it 2 more times, it is causing bootloop after enabling any option and restarting.
Recovered by disabling all magisk modules from adb.
Hope there will be a fix soon.
Hello,
Thank you for A12 update.
So nice to have your magic on this version.
I would also love to see the ability to adjust navbar, and the possibility to move cursor with buttons in navbar like in GravityBox.
For me, Force MMS to connect isn't working on BeyondRom 4.1.
Is it working for others ?
I am using LSPosed zygist latest version and safety net 2.2.1
nishantgupta107 said:
Update
Did try flashing it 2 more times, it is causing bootloop after enabling any option and restarting.
Recovered by disabling all magisk modules from adb.
Hope there will be a fix soon.
Click to expand...
Click to collapse
Yup, currently the rule is don't do any change. I tried do partial changes, but no luck. I simply keep it running with default settings. Also bootloop recovery wasn't that fun, it did kill some OS settings I hardly noticed - i had to walk through all the settings.
doggydog2 said:
Yup, currently the rule is don't do any change. I tried do partial changes, but no luck. I simply keep it running with default settings. Also bootloop recovery wasn't that fun, it did kill some OS settings I hardly noticed - i had to walk through all the settings.
Click to expand...
Click to collapse
Yes, some os settings did get reset. Not sure why. But now I'll wait for a stable release (I have reflashed it now 5-6 times)
Arobase40 said:
You can install Magisk Bootloop Protector module...
It will disable Magisk modules when bootloop occurs.
Click to expand...
Click to collapse
Thanks. I did install, but it did not work, the phone kept rebooting, reflash was my last resort.
Bootloop
S10 plus UI 4.1 A12
LSPosed-v1.8.0-6482-zygisk
Hi,
Can anyone confirm this feature is still supported on Android 12.
The guide to ADB command to activate feature is no longer available via the app.
Can anyone provide the instructions.
Many thanks,
Andy