Hello guys, I have run into a serious problem here! Please help me out..
I have a GFive President G9 Android running stock Jelly Bean 4.2.1 (ROOTED). I tried to install a boot animation through ROM Toolbox app, when I rebooted it, it didnt show any boot animation and booted straight to the home screen. So I just went into the ROM ToolBox app and restored the bootanimation backup I had created earlier to get the original GFive boot animation back.
However, when I rebooted, my phone showed the GFive Logo, and after it the screen went dark( The screen is backlit but doesnt display anything). It just stops there and doesnt do anything. Ive tried removing the battery but to no avail. For some reason I CAN'T ACCESS the RECOVERY or the DOWNLOAD MODE, as holding the power button and vol up etc still ends up in the same situation - Black backlit screen after logo. The phone isnt in a reboot loop or anything, it just stops at the black screen for eternity.
THE WORST PART, this phone probably has a damaged USB port, since I was previously able to charge it via the PC, but it wasnt detected in the PC. So I CANNOT CONNECT IT TO THE PC.
So is there anyway I could get this phone back alive? Is a factory reset possible? Please help me experts!! :crying:
P.S Custom TWRP is installed, but I cant access it
So there's no expert in this whole forum who has a solution for this? Because no reply means no one has an answer..
Incase theres no way out of this, please mention that.
Related
Hi everyone,
I am stock at boot on my atrix 4g, it keeps rebooting when it reaches the home screen. This happened after I tried to change the font with motomizer app.
The phone is rooted, using stock motoblur 4.9.12(I am not sure of version maybe 4.5.12) I have cwm recovery up to date but android recovery is unresponsive, I am not familiar with the fastboot and rsd lite (which I already bricked one before with) I booted in to recovery several times with and without sd card it just doesn't go after loading the adroid man and the warning sign. There is no progress bar it stays in that state forever.
Does anyone has any idea what might be the problem here, any help would be appreciated to get it working again.
Thank you.
Hi everyone, I have this weird problem with my S6500, or rather my younger brother has.
He tried to put on his S6500 (not D, this phone is with NFC) Cyanogenmod 10.1, after some ups and downs, he finally got it to work, but... camera wasn't working, it was said on the cyanogenmod page to flash with the newest update, he did that, phone worked good... almost, after he was blocking his screen, he couldn't unlock it, because there was some kind of white screen stuff, weirder was the thing, that he could hear all the *clicking* sounds as he was trying to unlock. He had to restart the phone every time after he blocked the screen, so he wanted the phone to function normally and tried to put his stock ROM back again. Well the flashing went well (as Odin showed) but the phone stucked in bootloop.
The phone showed the Orange logo (he is using his original stock rom from Orange Poland, downloaded from sammymobile) and then it quickly changed to Samsung logo, after that the phone vibrates once, and after that it vibrates 3 times really fast and restarts from the Orange logo.
He tried to get into Recovery mode, but coul;dn't (the phone doesn't react to any of the combinations we found - vol+,vol-, home and power and many others), and as I forgot to mention before, after every flash (while the recovery was working) he cleared data in menu of the recovery.
We also tried the different method to boot the phone into recovery mode (put it in Download mode, which works and then instead of going further by pressing vol+ we pressed the down button and held vol+,vol- and home button, but instead of going into recovery the phone booted in weird screen with small letters RAMDUMP MODE (ARM9 mode).
We tried several times to flash new recovery with Odin, but it doesnt work, the PIT file also doesn't work, or can someone provide me with the stock s6500 PIT file as I couldn't find one, because I read in the Polish forum, that screen mentioned before only shows up if there is a SuperUser app in the phone, so we need the PIT file to flush it.
So the problem is after flashing it with numerous cwm and original stock roms we couldn't get it to boot or to get into recovery menu, or get it working.
Also the hardware is all ok, as the phone is almost brand-new ( he got it from the Orange few months ago).
So help plz?
I have the very SAME problem with my S6500D. Same as described above.
Anyone has managed to fix this problem ? I have all needed tools.
hello everyone
this phone is NOWHERE... i cant believe how few people have this phone in the hacking community.
I've used a guide seen here
https://www.youtube.com/watch?v=BCiq21WsFEc
essentially I rooted it in KK successfully. Then I installed TWRP through the twrp app... installed successfully. no error.
Went to reboot, phone does not get past splash. Recovery instantly goes to black (powered off) screen with red LED (tells me the phone is kind of on.. but some serious hardware misunderstanding taking place.)
How can I restore the stock recovery? While it is in this no-display-red-light mode it appears on my computer in DFU... so I know it is possible to still get in there, but I cannot find anything about the stock recovery for this phone.
Can't believe ZTE has little to no support for this phone...
Possible solution
That video seemed to be for the newer model of the zte grand x, thats why its called grand x plus. I had tried it on my phone and it was like stuck in a power up loop, what i did to get out of it is to go into recovery mode by pressing and hold the power button plus the up volume button. One i got in there i just rebooted it. Try that out and see if it works. Im still looking around for a solid root for this phone
Hi guys, i need help.
was using my phone this morning and suddenly it restarted itself.
the phone passed through boot icon and went to "almost" into launcher screen.
my phone is rooted and thought that it might be due to software, hence i flashed stock firmware into it.
so now it is in stock rom and stock recovery.
but the phone still restarts.
it will still pass through the boot icon and since it is fresh installed, it goes to the setup screen, but from the the phone restarts again.
it seems like it restarts everytime it finish boot.
thinking that it might be screen issue, so i go into (stock)recovery mode, i try to navigate around in it by going to wipe phone, install from storage, and the phone doesnt restart.
please advise what might be the cause or issue since i had already flashed stock rom, so i guess rom isnt a problem, and phone doesnt restart when it is in recovery mode...
Hey Community,
i´ve got some problems after i tried to fix my Galaxy S5 (SM-G901F). One day i accidentally dropped my phone and purple spots started to show up on my screen until eventually all of it was covered and the phone was therefore unuseable. So i thought my screen was the issue, which is why i bought a third-party screen. After i installed the screen i tried to boot up my phone, which is when i first started to notice the problem.
My phone won´t boot. It´ll show the screen, which says "Samsung Galaxy S5/ Powered by Android), but then it just goes black for a few seconds and then it starts all over again. So i thought it would help to wipe the cache by going into recovery mode, but it turned out that i have no access to the recovery mode, whereas i still have access to the download mode. I tried to flash a new recovery using odin, but the problem stays the same.
Then i had the idea, that the logic board might have a problem, which is why i bought a new logic board. After i installed it i tried to boot the phone up, but then the same problem appeared as i described above. This time i didn´t even have any access to the recovery and the download mode.
I would appreciate any help i could get.
Please contact me if you have any further questions.
ROVERXDADEVELOPERS