Folks,
I really need your help.
I bought p9000 a week ago, and did the standard upgrades via OTA.
I read about the Android Nougat version, and I decided to install via Flash Tools, however, due to the various bugs, I decided to go back to Marshmellow version 6.0.
The problem happened after I used the flash tools, it simply bricked.
The process happened correctly, but it just does not start.
I read in other forums to try to remove the plug from the battery, and so I did, but did not solve anything, my computer simply does not recognize the device.
I use Windows 10 x64 ... Please, anyone know how to recover a braided device?
I'm waiting.
Thank you very much.
Regards
Alicio04
SOLUTION
I found the solution.
I used the Nougat version bootloader, and I connected the phone.
I uninstalled all previously installed drivers, (MTK driver) and even dead, I held the volume up button, and the PC recognized the device, installing the bootloader normally via flash tools.
I'm very happy that it worked, if anyone needs help, this is a solution.
Regards
Mind throwing quick guide on how to flash bootloader? I got similar problem. My phone is dead for over a week now and I cant seem to fix it. PC recognize it, drivers are all good. When i Click "Download" on Flashtools and connect my phone, process goes well and everything ends with "ok", but phone is not starting. It just hangs on Elephone logo. Also if this is helpful in order to determine my problem, I rebooted into recovery but recovery is not recognizing my Internal Memory when I try to Wipe Data or Wipe Cache. Even tho I can browse through my Internal and External memories. Please help and thanks in advance!
stewakg said:
Mind throwing quick guide on how to flash bootloader? I got similar problem. My phone is dead for over a week now and I cant seem to fix it. PC recognize it, drivers are all good. When i Click "Download" on Flashtools and connect my phone, process goes well and everything ends with "ok", but phone is not starting. It just hangs on Elephone logo. Also if this is helpful in order to determine my problem, I rebooted into recovery but recovery is not recognizing my Internal Memory when I try to Wipe Data or Wipe Cache. Even tho I can browse through my Internal and External memories. Please help and thanks in advance!
Click to expand...
Click to collapse
thats due to preloader, try using the updated preloader, you can find in lineage thread, it should boot normally after
Ruben Craveiro said:
thats due to preloader, try using the updated preloader, you can find in lineage thread, it should boot normally after
Click to expand...
Click to collapse
I will try that tonight. Thanks for your suggestion. What should be clicked before I click download? Ona preloader or it should be all?
stewakg said:
I will try that tonight. Thanks for your suggestion. What should be clicked before I click download? Ona preloader or it should be all?
Click to expand...
Click to collapse
i guess all except boot partition bevause i think it comes with it too, but might not make it boot if you have a different version of android, if it still doesnt work try flashing latest stock rom with latest preloader and should work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Maybe twrp recovery will work
This picture was taken after following official guide in lineage thread. After this I have flashed stock rom 08.10 but it won't boot
stewakg said:
This picture was taken after following official guide in lineage thread. After this I have flashed stock rom 08.10 but it won't boot
Click to expand...
Click to collapse
Flash stock rom but replace preloader with the lineage os preloader, it should boot
Ruben Craveiro said:
Flash stock rom but replace preloader with the lineage os preloader, it should boot
Click to expand...
Click to collapse
Its a no go... First I flashed 10.08.2016 version and it didn't boot. Then I tried with lineage preloader (checked only preloader without rest of the options) and still won't boot. Flashed latest version 12.01.2017, still wont boot. Tried with preloader from lineage, and it still ain't booting. Am I missing something?
Thanks in advance
stewakg said:
Its a no go... First I flashed 10.08.2016 version and it didn't boot. Then I tried with lineage preloader (checked only preloader without rest of the options) and still won't boot. Flashed latest version 12.01.2017, still wont boot. Tried with preloader from lineage, and it still ain't booting. Am I missing something?
Thanks in advance
Click to expand...
Click to collapse
If it powers on, use johnnys twrp version 8, and flash lineage os, it should boot
---------- Post added at 08:45 PM ---------- Previous post was at 08:36 PM ----------
stewakg said:
Its a no go... First I flashed 10.08.2016 version and it didn't boot. Then I tried with lineage preloader (checked only preloader without rest of the options) and still won't boot. Flashed latest version 12.01.2017, still wont boot. Tried with preloader from lineage, and it still ain't booting. Am I missing something?
Thanks in advance
Click to expand...
Click to collapse
Ill just tell you the partitions i flashed in order to make it boot, i flashed lineageOS using twrp on old Preloader, which made it constantly go on reboot loop, then i used the file named "preloader for updated versions" which flashed Preloader, lk, lk2 and boot partition (i unticked recovery partition) and jt booted lineage normally. You might need to update the twrp to 3.0.2-8 if not already, after you flash the updated preloader.
Updated preloader, installed twrp 0.8 and here are results:
stewakg said:
Updated preloader, installed twrp 0.8 and here are results:
Click to expand...
Click to collapse
Hi.
Did you solved your problem?
greetings
vsrookie
Sent from my P9000 using XDA-Developers Legacy app
vsrookie said:
Hi.
Did you solved your problem?
greetings
vsrookie
Sent from my P9000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Unfortunately not
Hi.
Did you tried to flash stock again with splashtool? With all partitions and begin from scratch?
greetings
vsrookie
Sent from my P9000 using XDA-Developers Legacy app
Kraj, tries that. All the time same result. Phone is not booting. Hangs on elephone logo.
Hi.
Which stockrom did you try?
greetings
vsrookie
Sent from my P9000 using XDA-Developers Legacy app
Latest and 10.08.2016 versions.
stewakg said:
Latest and 10.08.2016 versions.
Click to expand...
Click to collapse
Flash 20160304 preloader and keep trying. It takes a couple of attempts and hold the volume up button. flash only the preloader. Afterwards flash the latest rom
Related
Hey guys,
I'm having a bit of a hard time flashing CM again, everytime I try to flash any ROM TWRP just leaves me with an error 7 (something along the lines of "This file is for e1003, your device is ONE).
I know I can just delete the updater script but can someone give me a permanent solution to this?
(I'm running the official TWRP 3.something, oxygen os and bluespark's kernel)
(Also I was able to flash CM in the past but it is not working now)
(Just one more thing - feel free to leave an explanation on why this happen, I'm a curious and geeky guy
Is it TWRP 3.0.0.1 ?
If not, reflash it by adb or from the TWRP. BE CAREFULL , do a FLASH IMAGE not zip !
https://dl.twrp.me/onyx/
Or try one here :
http://forum.xda-developers.com/oneplus-x/development/recovery-t3295363
I think ROM is for E1003 and your device is E1001 at the back in the bottom it is mentioned check it ☺☺
Kéno40 said:
Is it TWRP 3.0.0.1 ?
If not, reflash it by adb or from the TWRP. BE CAREFULL , do a FLASH IMAGE not zip !
https://dl.twrp.me/onyx/
Or try one here :
http://forum.xda-developers.com/oneplus-x/development/recovery-t3295363
Click to expand...
Click to collapse
Already reflashed TWRP but throw flashify - might that be the problem?
Sultan0274 said:
I think ROM is for E1003 and your device is E1001 at the back in the bottom it is mentioned check it
Click to expand...
Click to collapse
Nope my phone is e1003
pedrof1991 said:
Already reflashed TWRP but throw flashify - might that be the problem?
Click to expand...
Click to collapse
Don't know, I never flash recovery on OPX from Flashify.
Always via ADB or via TWRP directly.
Kéno40 said:
Don't know, I never flash recovery on OPX from Flashify.
Always via ADB or via TWRP directly.
Click to expand...
Click to collapse
I think I've found the problem! I was flashing the first ever build of CM 13 LMAO!
I'm re-downloading the ROM now - whish me luck
Solved!
Yeah the problem was that I was using the first but of CM 13 which one had one device name supported (E1003) now it support our device with three different "code names" (ONE, E1003, Onyx and Oneplus).
Thanks for all the help guys
pedrof1991 said:
Already reflashed TWRP but throw flashify - might that be the problem?
Nope my phone is e1003
Click to expand...
Click to collapse
I always use flashify. I don't even need a PC to switch ROMs anymore haha since the OPX is officially supported by TWRP you can't really do it wrong anymore. download TWRP in flashify and flash. doesn't get easier than that.
Which version supports different "code names" (ONE, E1003, Onyx and Oneplus). ?
pedrof1991 said:
Yeah the problem was that I was using the first but of CM 13 which one had one device name supported (E1003) now it support our device with three different "code names" (ONE, E1003, Onyx and Oneplus).
Thanks for all the help guys
Click to expand...
Click to collapse
Which version of CM 13 should i download that supports all the code names ? If you can paste a link would be very grateful
Thank you
Try this one :
http://forum.xda-developers.com/one...m-kernel-unofficial-cyanogenmod-13-0-t3375221
Start with installing TWRP V > 3
Kéno40 said:
Try this one :
http://forum.xda-developers.com/one...m-kernel-unofficial-cyanogenmod-13-0-t3375221
Start with installing TWRP V > 3
Click to expand...
Click to collapse
Thank you i tried but this shows now "can't install this package on top of incompatible data "
Im having the same kernal version my TWRP is > 3.
Please see this https://s32.postimg.org/mcxs3y98l/IMG_20160712_WA0006.jpg This package is for device onyx, E1003 , your device is ONE
arjun_aj said:
Thank you i tried but this shows now "can't install this package on top of incompatible data "
Im having the same kernal version my TWRP is > 3.
Please see this https://s32.postimg.org/mcxs3y98l/IMG_20160712_WA0006.jpg This package is for device onyx, E1003 , your device is ONE
Click to expand...
Click to collapse
First go to settings in the recovery and disable the zip files verification try to flash again.
Second if 1st don't work : With the 3... TWRP, flash the Sultan's recoveryimg as recovery . Forget that, I read bad your screenshot !
Go to install / install image at the booton right. Click on the . img file and flash as recovery !
Reboot recovery than you should be able to flash everything.
---------- Post added at 04:20 PM ---------- Previous post was at 03:46 PM ----------
Third :
in \META-INF\com\google\android\updater-script
erase tyhe line about the phone verification and it should work !!
But that's weired... It should be fixed now with a recent CM and a uptodate TWRP....
Kéno40 said:
First go to settings in the recovery and disable the zip files verification try to flash again.
Second if 1st don't work : With the 3... TWRP, flash the Sultan's recoveryimg as recovery . Forget that, I read bad your screenshot !
Go to install / install image at the booton right. Click on the . img file and flash as recovery !
Reboot recovery than you should be able to flash everything.
---------- Post added at 04:20 PM ---------- Previous post was at 03:46 PM ----------
Third :
in \META-INF\com\google\android\updater-script
erase tyhe line about the phone verification and it should work !!
But that's weired... It should be fixed now with a recent CM and a uptodate TWRP....
Click to expand...
Click to collapse
Tried all but no luck
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sultan's as well as another build
Sultan's latest build has codename ONE mentioned but no luck here too
Should i wipe all data and redo?
Seriously, whith this new error message, I think something is messed up.
Just to be sure, you unlock the phone with the full procedure. i.e. unlock bootloader, flash custom recovery.... Right?
If so, I think, you should erase all. Install the full OOS 2.2.1-X zip .
http://downloads.oneplus.net/oneplus-x/oneplus_x_oxygenos_2.2.1-x/
And then rewipe and install CM.
If it doesn't work , you will have to format more deeply (just format Cache data & system, not internal data.)
Kéno40 said:
Seriously, whith this new error message, I think something is messed up.
Just to be sure, you unlock the phone with the full procedure. i.e. unlock bootloader, flash custom recovery.... Right?
If so, I think, you should erase all. Install the full OOS 2.2.1-X zip .
http://downloads.oneplus.net/oneplus-x/oneplus_x_oxygenos_2.2.1-x/
And then rewipe and install CM.
If it doesn't work , you will have to format more deeply (just format Cache data & system, not internal data.)
Click to expand...
Click to collapse
Yes im rooting with KingRoot latest and TWRP Recovery latest, Tried HydrogenOS https://forums.oneplus.net/threads/ultimate-guide-for-hydrogen-os.446790/ in between that flashed successfully. (That was buggy for me ) flashed to OOS 2.2.1-x
arjun_aj said:
Yes im rooting with KingRoot latest
Click to expand...
Click to collapse
That's why I think !!
You should have done that :
http://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
Kéno40 said:
Is it TWRP 3.0.0.1 ?
If not, reflash it by adb or from the TWRP. BE CAREFULL , do a FLASH IMAGE not zip !
https://dl.twrp.me/onyx/
Or try one here :
http://forum.xda-developers.com/oneplus-x/development/recovery-t3295363
Click to expand...
Click to collapse
TWRP 3.0 is official and is it working on onyx?
Of course
Hey, I'm using a Oneplus X running the latest CM 13 nightly, and TWRP 3.0.2.0, and I always get error 7. What can I do?
_mikelanda said:
Hey, I'm using a Oneplus X running the latest CM 13 nightly, and TWRP 3.0.2.0, and I always get error 7. What can I do?
Click to expand...
Click to collapse
Which twrp version you are using?
Official or unofficial?
Hi,
I can't get out of the bootloop of my Honor 7. Here below the history:
1) Unlock bootloader: Success
2) Install TWRP: Success
3) Install SuperSU 2.65: Fail
From this point i tried to recover from a new original rom with Multi-tool, but still bootloop. I also wipe all caches but still same issues. I don't know what to do as i have the feeling i tried everything already.
If someones could help me it would be nice. I still have access to bootloader (volume - & power) and I sometimes get access to TWRP but screen freezes, i can't go into any of the settings.
Thanks for your support!
Download full rom 121 if you are in LP or 320/330 if you are in MM.
Put the rom .app file into dload folder in the SDcard
Flash stock recovery,flash the rigth rom with vol+,+,vol-,+,pwr, the flashing will start automatly.
Upgrade to 180 or 330.
The files:
http://www.modaco.com/forums/topic/...ck-rom-images-updated-1st-april-2016-plk-l01/
Flamenawer said:
Download full rom 121 if you are in LP or 320/330 if you are in MM.
Put the rom .app file into dload folder in the SDcard
Flash stock recovery,flash the rigth rom with vol+,+,vol-,+,pwr, the flashing will start automatly.
Upgrade to 180 or 330.
The files:
http://www.modaco.com/forums/topic/...ck-rom-images-updated-1st-april-2016-plk-l01/
Click to expand...
Click to collapse
That won't work sadly, PLK-L01 is totally different than PLK-TL01H in terms of software.
The updates is also named differently compared to the European version, in the EU (and elsewere?) it's 180, 320, 330 etc. but on the PLK-TL01H it's 6.3.16, 6.4.1 etc.
Hi,
indeed Flamenaver the link you post is for PLK-L01 only.
Can i use one of these firmware instead which are original ones for PLK-TL01H?
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=170
How does this VOL UP + VOL DOWN + Power works exactly? Do I need the press the 3 together until i see the upgrade starting or do I relesea as soon as I see HONOR Welcome Screen ?
Because it is not working if i keep the 3 pressed until something happens, because then it is restarting and restarting for ever.
On the other side, just pressing 3 for 10 seconds and couple of seconds after it powers on doesn't work neither.
Thanks for the support.
Tabithalos said:
That won't work sadly, PLK-L01 is totally different than PLK-TL01H in terms of software.
The updates is also named differently compared to the European version, in the EU (and elsewere?) it's 180, 320, 330 etc. but on the PLK-TL01H it's 6.3.16, 6.4.1 etc.
Click to expand...
Click to collapse
Try to install LP or MM full rom (no ota o zip roms),from stock recovery, with the standard process for your phone, is a universal unbrick procedure for soft_bricked phones.
I can't get access to stock recovery. I can reinstall Stock recovery from Honor Multi Tools but i can't get in it.
If i keep vol+ & Power or Vol+, Vol- & Power pressed i get onl the honor welcome screen bootloop, nothing else
Hi, I got into this mode in the end. Is this the Force update mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It was not easy to get in. Keep you informed in a couple of seconds what the results are.
Thanks
Tried twice already and always stuck at 90%...
sebastien_be said:
Tried twice already and always stuck at 90%...
Click to expand...
Click to collapse
If it's stuck at 90% it's not working, believe me, I've had the same problem, I tried to update SuperSU and it bricked. Had to factory reset it and update the phone to the newest version which currently is 6.4.1, THEN go through the process of installing TWRP, SuperSU etc.
If you can't get the updates via the "Updater" option in the options, try to manually downgrade/upgrade it and see if it appears. You have to do some fancy google-translate to chinese to find the update packages on chinese forums.
Why U don't try the Honor 7 Multitool and the huawei update extractor combo???
That must be work!
Hi,
this is the latest status: https://youtu.be/QsPOg4lKkSc
I'm already using Multi-Tools and extracted a PLK-TL01H stock rom. I then used the unbrick option in multi-tools and restores this stock rom. But even though it starts fine, i can enter my pin code but when the language screens comes in, it makes a weird noise and reboots.
I then went into TWRP which works fine and could wipe cache and wipe dalvik cache. But I'm still stuck with welcome crash.
Any idea what to do? As reminder:
1) Bootloader is unlocked
2) Bootloader screen works fine (fastboot works but adb doesn't)
3) TWRP screen also works fine.
Thank you!
Did you try with an older or an other stock rom?
Yes I tried these two versions;
PLK-TL01H-C01B201
PLK-UL-TL-CL_EMUI3.1_Android5.1_5.12.1
Actually this version: PLK-TL01H-C01B201 works fine but only without sim card and SD card. If one of these is inside then i get automated reboot after entering pin code. But if i reboot without these two, then the phone works fine (i can get access to wifi, menu, and so on...).
WEIRD!
Hi,
My Honor 7 is still bricked and i can't get out of it. I tried to unbrick by flashing the following files from a stock rom:
fastboot flash boot .\Unbrick\BOOT.img
fastboot flash cust .\Unbrick\CUST.img
fastboot flash recovery .\Unbrick\RECOVERY.img
fastboot flash system .\Unbrick\SYSTEM.img
The flash of these 4 files works fine. I then get the welcome screen where i can choose the language, HiCloud settings and so on. As long as i do not get out of the flight mode it seems to be stable. But when i enter the pin code of my simcard (amongst others), then i get a crash and reboot.
So i have the feeling that there are still some conflicts. In the stock rom there are many other IMG files. Shouldn't I also flash them? I have the following IMG files: 3RDMODEM, CACHE, CRC, CURVER, DTIMAGE, EFI, FASTBOOT, MODEM, etc etc.
I have the feeling that if i flash them all, then it might work fine. But all files do not have a specific partition, so i don't know how to flash them.
Thanks for the support!
sebastien_be said:
Hi,
My Honor 7 is still bricked and i can't get out of it. I tried to unbrick by flashing the following files from a stock rom:
fastboot flash boot .\Unbrick\BOOT.img
fastboot flash cust .\Unbrick\CUST.img
fastboot flash recovery .\Unbrick\RECOVERY.img
fastboot flash system .\Unbrick\SYSTEM.img
The flash of these 4 files works fine. I then get the welcome screen where i can choose the language, HiCloud settings and so on. As long as i do not get out of the flight mode it seems to be stable. But when i enter the pin code of my simcard (amongst others), then i get a crash and reboot.
So i have the feeling that there are still some conflicts. In the stock rom there are many other IMG files. Shouldn't I also flash them? I have the following IMG files: 3RDMODEM, CACHE, CRC, CURVER, DTIMAGE, EFI, FASTBOOT, MODEM, etc etc.
I have the feeling that if i flash them all, then it might work fine. But all files do not have a specific partition, so i don't know how to flash them.
Thanks for the support!
Click to expand...
Click to collapse
The main problem that you were on MM version (6.3.16-DEV edition of ROM, no official update) of ROM and you're trying to flash Lollipop (B201, 5.12.1). It means that your problems are probably caused by this. Try to flash 5.12.16 then OTA update to 6.1.1 (using WiFi if possible) and then rollback from Emui 4 to Emui 3.1 if you want use Emui 3.1 and Lollipop. it's up to you. It's possible that your will be able to use SIM card when you would update to 6.1.1 (MM)
Sent from PLK-TL01H
SOLVED!
Thank you Lucki_X and Inside!Out ! Indeed i was trying to flash with Android 5.0 while i was already on Android 6.
Consequently I used the unbrick option from Multi-tools by using this version PLK-TL01H_EMUI4.0_Android6.0_6.2.1(B634).zip
Now everything works fine. Can anyone tell me how to install SuperSU? Because it is due to installation of SuperSU through TWRP that it caused the crash. I installed SuperSU 2.65 BETA.
How to do and which version to install to avoid bootloop?
Thanks very much,
Sebastien.
Hi All,
any idea why i now only have 3,87GB available as internal storage?
sebastien_be said:
Hi All,
any idea why i now only have 3,87GB available as internal storage?
Click to expand...
Click to collapse
Probably because you have multiple ghost systems as a result of previous still in memory. Factory reset will help.
Thank you! This is also solved now (Factory reset in TWRP + Calvik & Cache Wipes)!
Last question: Any advice on how to install SuperSU? Because by trying to install 2.65 BETA it caused the bootloop earlier.
Is there any version to propose instead of another one?
Thanks,
To answer my question: There is only the v2.62 that is working with Honor7 ! I Tried 2.49 and 2.65 both creates startup bootloop. Hopefully this time i got a full backup made in TWRP, was pretty easy to comeback to a working version.
i have a similiar brick as you. Flashed from B201 to B352 via the OTA. Had a boodloop, tried to erase cache and factory reset.
Tried to unbrick my phone with multi tool (first with the B201 udpate.app - now with B634 update.app). Now i'm in a bootloop again. What can I do?
EDIT: I'm in the ROM now, but can't enable my SIM card and WIFI is also not working
What can i do?
Unofficial TWRP Recovery for LG Optimus L9.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom “ROM” like OmniROM
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
Use Flashify / Rashr from the PlayStore to flash.
Screenshots::
Download links:
- P60/P765/P768:
twrp-3.0.2-0-p760.img
- P769:
twrp-3.0.2-0-p769.img
XDA:DevDB Information
TWRP 3.0 for LG Optimus L9, Tool/Utility for the LG Optimus L9 P760, P765, P768
Contributors
EdwinMoq
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Created 2016-04-08
Last Updated 2016-04-08
Ohhh my God!!!!!! i can't believe it!!!! Man you are the master.
Really Really thanks for your great works!
Tested,and works perfect!!!
yeah dude awesome :* thanx it"s work great i test it now !!!
Great. This time I was using Rashr instead of Flashify. Can reboot to recovery without problems.
But I haven't got the cojones so far to check, whether the Power-Volume-Menu combo will brick the phone, as happening with the previous version. I will only get to know once the next build of CM13 arrives, and that again won't even work good enough to let me boot into recovery to restore the nandroid...
Can't access my exFAT formatted SD card. How do I fix it?
Casserole said:
Can't access my exFAT formatted SD card. How do I fix it?
Click to expand...
Click to collapse
Huh? I should be able to access any file system. Can you get the recovery.log by getting to Advanced --> Copy log and post it here?
Thank you for this gift but i want to install pa 4.4.4 and it display error 7. How can i resolve? thanks
satiryco said:
Thank you for this gift but i want to install pa 4.4.4 and it display error 7. How can i resolve? thanks
Click to expand...
Click to collapse
Check that the rom You're installing is made is made for your phone. The error 7 usually means that the user is trying to install on an incompatible device.
lecorbusier said:
But I haven't got the cojones so far to check, whether the Power-Volume-Menu combo will brick the phone, as happening with the previous version.
Click to expand...
Click to collapse
I didn't know that issue before today (yep, I bricked my phone). After fixing it and doing software reboots (through adb) I got everything working. Everything else is working perfectly. Thanks, Edwin. Got your TWRP 3.0.2 and CM13 running by now.
So is it even possible to flash back to stock after installing this?
bulletfreak said:
So is it even possible to flash back to stock after installing this?
Click to expand...
Click to collapse
Can't you flash stock using LGFlashTool? I don't see how to twrp would prevent you from doing so.
bulletfreak said:
So is it even possible to flash back to stock after installing this?
Click to expand...
Click to collapse
Yes... if before you do a rom (stock) backup with twrp
I was able to get to TWRP 3.0.2.0 at boot several times, unlike Twrp 2.8.
However, I got a rather serious brick later, with the P760 restarting every 3 seconds, and no access to TWRP and Fastboot. After unbricking, D/L mode still worked, and installing Twrp anew, I haven't tried that again, always rebooting into recovery.
For the Fastboot problem under Win8.1 and 10 it may help to deactivate all powersave settings for usb hubs and host controllers. I haven't tried that yet.
If TWRP's boot screen won't disappear, hit power twice, and you're in TWRPs lockscreen.
I have just rooted my Galaxy Note 2014, which has an official TWRP 3.0.2. I can tell that that one has more issues than this,despite being official.
Can i ask, please, if i want to switch from cwm to twrp, could o just flash this img? I want to flash your marsh rom afterwards
Thanks in advance
Sent from my LG-P760 using Tapatalk
besnaglista said:
Can i ask, please, if i want to switch from cwm to twrp, could o just flash this img? I want to flash your marsh rom afterwards
Thanks in advance
Sent from my LG-P760 using Tapatalk
Click to expand...
Click to collapse
Yes, just flash the img with Flashify or similar.
If Flashify don't work, install Rashr and reboot, for safety. For some people Fastboot don't work, so the option to flash via PC don't exist. This incurs extra circumstances, if something goes wrong.
I had an old version of twrp on my P760. To flash new one I replaced the old one in flashable zip with this new one, then flashed it on twrp like installing a rom. It successfully flashed. I'm sharing the flashable twrp 3.0.2-0 zip file if it helps. It should aslo work on P765 and P768. https://mega.nz/#!LAggTZbR!58cGt1xxGtIXo_AOSXf4w1RNHTm1I4WgTGDQBuq4Vts
Big thanks to @EdwinMoq
I have reverted to stock weeks ago, to use the phone as a mobile AP with a data SIM. So far, probably because of missing SIM, 5ghz wifi and gps don't work. The dead sensors in CM12/13 came back to life.
As Fastboot don't work with L9 & Win10, i had to root using Kingo Root. I don't like the Kingo superuser tool. Days ago, for the second time, the phone bricked while trying to install SuperSu. It's still in that state.
I was using Edwin's TWRP, which worked fine with CM12 & 13. The older Twrp from Artas had the habit to brick the phone while trying to access it at boot. Rebooting from Android to Twrp was no problem, however. If you go further back in time, there was only CWM. I was using CWM along with stock years ago, seems i have to get it again.
Boot to Recovery?
EdwinMoq said:
Yes, just flash the img with Flashify or similar.
Click to expand...
Click to collapse
How to acces with power offe device? Power+ Vol- combination does not work and I have to access using Advanced Reboot
This is the LG G6's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Install APKs
Uninstall APKs
Take a Screenshot
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Good Job!
TheWolfSVK said:
Good Job!
Click to expand...
Click to collapse
Thanks, have you tried it?
mauronofrio said:
Thanks, have you tried it?
Click to expand...
Click to collapse
Downloading it atm
Anyone tried this on LG G6?
This can relock G6 bootloader like for warranty purpose?
Which functions are available/unavailable for G6
The only functions that are not available are flash stock recovery and flash factory image. The others are all available. Locking the bootloader you can brick your phone, the tool will send just a fastboot command. I've tested the bootloader unlocking procedure for lg g6 and twrp flash. There are a lot of others function that i've not tested but they should work (Apk Installer, reboot commands, zip flasher, ....)
mauronofrio said:
The only functions that are not available are flash stock recovery and flash factory image. The others are all available. Locking the bootloader you can brick your phone, the tool will send just a fastboot command. I've tested the bootloader unlocking procedure for lg g6 and twrp flash. There are a lot of others function that i've not tested but they should work (Apk Installer, reboot commands, zip flasher, ....)
Click to expand...
Click to collapse
Hello, sorry i'm a noob at G6 (just got it last week) i came from an easy to unlock/flash Nexus 5X, i have some questions, do i still need the LG Develpoer site to unlock bootloader? or is this done internally in your program?
outlawman007 said:
Hello, sorry i'm a noob at G6 (just got it last week) i came from an easy to unlock/flash Nexus 5X, i have some questions, do i still need the LG Develpoer site to unlock bootloader? or is this done internally in your program?
Click to expand...
Click to collapse
You always need the LG Developer site. This tool is done to simplify processes not to bypass them. With this tool you will never use the terminal anymore.
mauronofrio said:
You always need the LG Developer site. This tool is done to simplify processes not to bypass them. With this tool you will never use the terminal anymore.
Click to expand...
Click to collapse
oh, thank you will try it out when i decide to unlock and flash some custom roms ;D still quite happy with the stock rom it came with ...OR maybee when there is a working option for locking the bootloader, but i guess we will have to wait for that for some time ...
outlawman007 said:
oh, thank you will try it out when i decide to unlock and flash some custom roms ;D still quite happy with the stock rom it came with ,or maybee when there is a working option for locking the bootloader, but i guess we will have to wait for that for some time...
Click to expand...
Click to collapse
The command is there but you can brick your phone. I think you need of a QFIL stock rom to relock bootloader. But i think Lg has a database with all device unlocked...
Awsome tool!
It would be cool if we could lock the bootloader without fear of the dreaded brick
tron4200 said:
It would be cool if we could lock the bootloader without fear of the dreaded brick
Click to expand...
Click to collapse
Yes sure, when there will be a safe guide, it will also be safe to lock the bootloader
Will give this a try once someone has tried it some more.
Just tried to unlock my g6. It works. Then I tried to flash recovery, but, maybe I'd have had to reboot phone prior to flash recovery, infact after reboot the recovery installed was the stock one. So I flashed it via fastboot command manually...
Anyway, simple and working. Gread job!
galerio said:
Just tried to unlock my g6. It works. Then I tried to flash recovery, but, maybe I'd have had to reboot phone prior to flash recovery, infact after reboot the recovery installed was the stock one. So I flashed it via fastboot command manually...
Anyway, simple and working. Gread job!
Click to expand...
Click to collapse
Thanks for feedback, can you please tell me what recovery you have installed through fastboot?? Maybe the recovery in the tool ai wrong or have problems.
Have tried the H870 one, TWRP 3.1.1, the one that the software automatically download from server. The final message saied it was installed correctly, but after reboot, normal recovery was presented (the one that reset phone to factory reset, and infact it has resetted the phone)
---------- Post added at 01:34 PM ---------- Previous post was at 01:15 PM ----------
mauronofrio said:
Thanks for feedback, can you please tell me what recovery you have installed through fastboot?? Maybe the recovery in the tool ai wrong or have problems.
Click to expand...
Click to collapse
Maybe the problem was not your software... Now that I am in twrp I have transferred a rom in the internal storage, I have installed it, but phone is in bootloop. And now, entering in twrp it says the storage is encrypted and asks me for the password.... now, what to do??? Damn...
galerio said:
Have tried the H870 one, TWRP 3.1.1, the one that the software automatically download from server. The final message saied it was installed correctly, but after reboot, normal recovery was presented (the one that reset phone to factory reset, and infact it has resetted the phone)
---------- Post added at 01:34 PM ---------- Previous post was at 01:15 PM ----------
Maybe the problem was not your software... Now that I am in twrp I have transferred a rom in the internal storage, I have installed it, but phone is in bootloop. And now, entering in twrp it says the storage is encrypted and asks me for the password.... now, what to do??? Damn...
Click to expand...
Click to collapse
Format data from twrp
@mauronofrio Ok, I solved and reinstalled from scratch everything. What went wrong, I think, is that after TWRP installation I haven't installed Magisk immediately.
Using a tool like your can induce people to just push a button and not follow every step of a good unlocking procedure. Anyway, it was my fault. Your tool works perfectly
Hey guys,
I've been installing customs without issue on my RN10.
Then one stopped booting freezing on the logo and bootloops.
Reinstalled stock with miflash and Redmi bootloops.
Tried customs again and same thing.
Any suggestions or things to try?
Worried the system_root and vendor errors are my problem.
Thanks in advance for any help or tips.
Cheers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GEoMaNTiK said:
View attachment 5541321
Click to expand...
Click to collapse
Try flashing the super image through recovery.
faced this problem the solution for me was to flash fastboot miui eu rom
SubwayChamp said:
Try flashing the super image through recovery.
Click to expand...
Click to collapse
Tried this and didn't help, thanks for the suggestion
muneeb rizwan said:
faced this problem the solution for me was to flash fastboot miui eu rom
Click to expand...
Click to collapse
Hey there, I've tried flashing via Mi Flash and although it says success, still bootloops on Redmi logo, then eventually to fastboot.
Do you remember which fastboot miui EU rom or have a link ?
I'll try anything at this stage.. think I've killed my first Xiaomi phone.
GEoMaNTiK said:
Tried this and didn't help, thanks for the suggestion
Click to expand...
Click to collapse
Also, you can fix it flashing this ROM xiaomi.eu_multi_HMNote10_V13.0.5.0.SKGMIXM_v13-12-fastboot
SubwayChamp said:
Also, you can fix it flashing this ROM xiaomi.eu_multi_HMNote10_V13.0.5.0.SKGMIXM_v13-12-fastboot
Click to expand...
Click to collapse
Thanks for this, just tried, used the windows_fastboot_first_install_with_data_format.bat and all installed with an OKAY.
No failures or errors during install. Phone bootloops on Redmi and comes back to Mi Recovery screen.
Is there a way with OrangeFox, TWRP and any other tool to fix the file system or help?
Thanks in advance.
GEoMaNTiK said:
Thanks for this, just tried, used the windows_fastboot_first_install_with_data_format.bat and all installed with an OKAY.
No failures or errors during install. Phone bootloops on Redmi and comes back to Mi Recovery screen.
Is there a way with OrangeFox, TWRP and any other tool to fix the file system or help?
Thanks in advance.
Click to expand...
Click to collapse
same with me..but i reset data in recovery ..phone booting normal back
Now I'm getting a failed to mount (block device required) but still not able to get a custom to boot. When I try to reboot, I'm getting a system partition is empty.
Next question I have, do I have to force encryption in Orangefox or turn it off?
Also DM-Verity, should both options be off or on for customs?
GEoMaNTiK said:
Now I'm getting a failed to mount (block device required) but still not able to get a custom to boot. When I try to reboot, I'm getting a system partition is empty.
Next question I have, do I have to force encryption in Orangefox or turn it off?
Also DM-Verity, should both options be off or on for customs?
Click to expand...
Click to collapse
bro im facing the same problem you have... im using rn10sunny twrp will not mount system, and didnt flash custom roms... and if i flash stock rom then it will goes to bootloop... im also in the same condition now.....
can you please contact me on telegram @KAVIKING007 for discuss about the problem.. it will help both we are getting solutions....
GEoMaNTiK said:
Thanks for this, just tried, used the windows_fastboot_first_install_with_data_format.bat and all installed with an OKAY.
No failures or errors during install. Phone bootloops on Redmi and comes back to Mi Recovery screen.
Is there a way with OrangeFox, TWRP and any other tool to fix the file system or help?
Thanks in advance.
Click to expand...
Click to collapse
I assume you are formatting data, no? The long procedure for me was, installing AEX, I couldn't install it with TWRP (in this state), used OFR, boot to the recovery that AEX provides, format data, then boot to system, check that all is ok, enable USB debugging, now go to fastboot and flash the Miui 13.
In other device was fixed just flashing the super image (from the stock ROM) onto the super partition.
Keep the OFR settings as they are.
My theory is that some custom ROMs break the sizes on the super partition and some images are not matching.
Can you please explain about OFR because i couldn't used before....
KAVIYARASU KING said:
Can you please explain about OFR because i couldn't used before....
Click to expand...
Click to collapse
OFR Orange Fox recovery, is available in the forum.
SubwayChamp said:
OFR Orange Fox recovery, is available in the forum.
Click to expand...
Click to collapse
I tried in orangefox also but same problem occurs..... that was system could not mount.... On twrp,OFR the system partition could not be mounted... I tried all the way... But no result
KAVIYARASU KING said:
I tried in orangefox also but same problem occurs..... that was system could not mount.... On twrp,OFR the system partition could not be mounted... I tried all the way... But no result
Click to expand...
Click to collapse
Try, as pointed out in previous posts, format data with AEX recovery, then flash Miui.eu 13 through fastboot.
Also you can try flashing the super image (from the stock ROM through OFR).
And, finally, you can try using Mi Flash tool BUT in EDL mode.
All of these, assuming that you are permanently flashing the custom recovery, not only booting to it.
GEoMaNTiK said:
Thanks for this, just tried, used the windows_fastboot_first_install_with_data_format.bat and all installed with an OKAY.
No failures or errors during install. Phone bootloops on Redmi and comes back to Mi Recovery screen.
Is there a way with OrangeFox, TWRP and any other tool to fix the file system or help?
Thanks in advance.
Click to expand...
Click to collapse
You did not use the correct *.bat file for a complete cleanup. The *.bat you used will leave the original data on your phone even if it is not compatible. If you have a problem and want to install a new clean Miui system, use the flash_all.bat file (in MiFlash this is the "clean all" option)
StaryMuz said:
You did not use the correct *.bat file for a complete cleanup. The *.bat you used will leave the original data on your phone even if it is not compatible. If you have a problem and want to install a new clean Miui system, use the flash_all.bat file (in MiFlash this is the "clean all" option)
Click to expand...
Click to collapse
I had already tried MiFlash before that other rom and it's .bat file.
Just tried this with MiFlash - mojito_global_images_V12.5.2.0.RKGMIXM_20210731.0000.00_11.0_global_ce90f80766.tgz
I selected flash_all.bat. Received a success on completion of flash, used this MiFlash2018-5-28-0 (as I was receiving errors on the new MiFlash versions).
And still my phone bootloops on Redmi. This almost confirms to me this phone is lost now, nothing else I can think of.
However, will wait to see if any other suggestions here.
Thanks everyone for trying to help, much appreciated.
Don't worry yesterday night i get a new solution for these problem..... Almost we will get our device soon..... Today im gonna test few steps and its work i will give the solution dude.... So don't worry....