Related
Ok, so like I was flashing my phone to Cyanogen mod 9 (using CWM port 0.6) and it went wrong. My phone is now bricked. When I try to boot it up now I get the phone to computer warning thingy message
I can get it into download mode and emergency download mode, but Odin either comes up with "FAIL."
I have tried every single thing on the web, NOTHING works (One click unbrick etc, etc, etc). Please help!
One thing that might help is One Click Unbrick, even after i've installed all of the software, reinstalled the drivers, won't recognise my phone!
Is there anything left that I could try???
P.S. On all the other similar threads, the things they suggest don't work
Mad_Guy said:
Ok, so like I was flashing my phone to Cyanogen mod 9 (using CWM port 0.6) and it went wrong. My phone is now bricked. When I try to boot it up now I get the phone to computer warning thingy message
I can get it into download mode and emergency download mode, but Odin either comes up with "FAIL."
I have tried every single thing on the web, NOTHING works (One click unbrick etc, etc, etc). Please help!
One thing that might help is One Click Unbrick, even after i've installed all of the software, reinstalled the drivers, won't recognise my phone!
Is there anything left that I could try???
P.S. On all the other similar threads, the things they suggest don't work
Click to expand...
Click to collapse
One click unbrick wont work on the galaxy 5 (i think ) and the best way to unbrick your phone is to use a JTAG or simply give it to samsung for repairs... Trying something which is not supported may worsen the situation ..
I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Do you have the correct drivers installed? Does adb recognize the device? You're in Odin mode when you try to use Odin to push something? I believe with ME7 you can Odin back to the official stuff.
Sent from my SCH-I545 using Tapatalk 4
TheColdOne said:
I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Click to expand...
Click to collapse
You need to make sure you have the drivers for the phone and have a solid USB connection (I prefer the rear of a tower)
sent from my GE gs4
I ended up getting it to work. I had to go here:
http://www.intel.com/support/chipsets/inf/sb/CS-013541.htm
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
I hate to hijack a thread but I'm stuck here. My GS 4 (Vzw) was supposedly successfully rooted using TWRP, but now I have no way to enter any sort of recovery. The package I downloaded for the root does not have an Odin version to run. I've been getting the endless prompts to install the 4.3 update but there is no way to do this on my phone. I get the same "Could not do normal boot. Odin mode. Write protection enabled" message with the downloading screen. I try to boot into recovery via CWM or Goomanager but it always goes to the same screen. I can't make any backups or restore now either or I would just do a factory reset. Any ideas? I'm on VRUAME7.
Um.... there's no recovery available with ME7.... are you on the MDK bootloader?
Sent from your mom's smartphone
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
BoltsRUs said:
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
Click to expand...
Click to collapse
You're said that you're on ME7 - what you need to do is to flash the "No wipe" ME7 ROM onto your phone. It's in the Development forum.
http://forum.xda-developers.com/showthread.php?t=2301259
You've got to update to MI1 before you can install the 4.3 update (MJ7).
ONLY flash files intended for whatever release you're running. You can't mix and match, can't go backwards, and can't skip updates.
Theres also an ml1 factory image in the dev section.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
TheColdOne said:
I ended up getting it to work. I had to go here:
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
Click to expand...
Click to collapse
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
nyankat said:
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
Click to expand...
Click to collapse
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
TheColdOne said:
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
Click to expand...
Click to collapse
Thanks! Finally Oden recognizes my phone
my amazing method
the same problem was with me 3-4 weeks ago...
follow the url-
dbloo dbloo dbloo dot autoroot dot chainfire dot eu
(i cant post the URL because the website is not allowing me.....understand and use the code)
1) choose your samsung model and download the recovery file
2) download and open odin on a dekstop
3) connect your device to the dekstop
4) press the volume down, home button and power button together till the screen changes
5) press the volume down button again
6) odin will show the message "attatched or connected"
7) click pda
8) attatch the file you downloaded
9) your device will be fixed and will be restarted
ur welcome
hai i am stuck at download mode with message as could not normal boot how to fix it
Hi guys, i was having problems with the stock messaging app, it was keep closing showing the message "Unfortunately, Messaging has stopped". I did factory reset and keeping not working, so i tried to install this rom http://forum.xda-developers.com/showthread.php?t=2468880 ,i got to install it succesful but it was running so slow, i reboot the phone and it keeps running to much slow until it frozen completely, so i removed the battery, then i tried to turn on, but nothing happens, remove the battery again and waited for a minutes and doesnt turn on, i also tried to do a factory reset using the buttons, is the phone bricked ? what can i do ?
Hi andr_oid, you could try this http://forum.xda-developers.com/showthread.php?t=2085344
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
hi bajoPrimate, i have tried to follow those steps but i cant get the omap driver works properly in my co,puter, its installed but when i connect the phone it keeps connecting and disconecting, some guys got it works holding the volume + while connecting the phone,but its not working for me. i have tried on windows 8, 7 and xp, same issue on all of them. i have installed the lg united mobile drivers, need another drivers or program?
Hi andr_oid, did you try with this? http://forum.xda-developers.com/showthread.php?t=2119090
Read carefully, you have to install the omap drivers twice!
Cheers. Good luck
Sent from my LG P76020p-EUR-XX unlocked and rooted
Ok, i got the phone turns on following the steps in the last links you send me, but the phone turns off after 1 o 2 minutes, and even that, i tried to flash the .kdz, but the program doesnt recognize the phone.I dont know what to do, the phone keeps connecting and disconnecting.
I don't know. Perhaps you could try another way with LGFlashTool by sammyz http://forum.xda-developers.com/showthread.php?p=52582562.
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
Edit: Or this way http://forum.xda-developers.com/showthread.php?p=50729855
** In LG Mobile Support Tool Navigate to Update/Tools and there select upgrade recovery.
Cheers . Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
I have tried everything and my phone keeps connecting and disconnecting, it also cant get enter in upgrade mode. Only i got is turn on in fastboot mode, so tried to flash the .zip of the last rom i installed, but after a bit more of 1 minute, the phone turns off, and on the console shows the error message "too many links", i tried with 3 different usb cable, it has to be the oem cable ?.
Also i got extracted the .img files from the kdz for my l9 p769, tried to flash the boot.img and the recorery.img using
fastboot flash boot boot.img
fastboot flash recovery recovery.img
but i get the error in both cases: FAILED (remote: partition does not exist).
Hi andr_oid, did you try this: http://forum.xda-developers.com/showthread.php?p=53407503
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
BajoPrimate said:
Hi andr_oid, did you try this: http://forum.xda-developers.com/showthread.php?p=53407503
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
Hi BajoPrimate, im getting same error, there is a way to recreate the phone partitions using fastboot ?
andr_oid said:
Hi BajoPrimate, im getting same error, there is a way to recreate the phone partitions using fastboot ?
Click to expand...
Click to collapse
Hi and_droid, I think there isn't, but perhaps i'm wrong, I read something about that in one thread by @kuma82 , perhaps he could help you.
Cheers. Good luck.
BajoPrimate said:
Hi and_droid, I think there isn't, but perhaps i'm wrong, I read something about that in one thread by @kuma82 , perhaps he could help you.
Cheers. Good luck.
Click to expand...
Click to collapse
Finally i managed to get the phone in SW upgrade mode, then i tried to flazh the kdz following this tutorial http://forum.gsmhosting.com/vbb/f77...h-any-lg-factory-rom-kdz-offline-fix-1736209/
Everything ok, the program recognize the phone and start to flash, but as before the phone turns of and the process fail.
Considering that the phone stop working after turn it off removing the battery, there is the posibility that the battery or the phone is damaged ?
Hi andr_oid, the link you've provided is just a copy of "our" @cmahendra's link http://forum.xda-developers.com/showthread.php?p=36351786
You could try with other battery, but I think that's not your problem.
Cheers. Good luck.
Sent from my LG P76020p-EUR-XX unlocked and rooted
andr_oid said:
Finally i managed to get the phone in SW upgrade mode, then i tried to flazh the kdz following this tutorial http://forum.gsmhosting.com/vbb/f77...h-any-lg-factory-rom-kdz-offline-fix-1736209/
Everything ok, the program recognize the phone and start to flash, but as before the phone turns of and the process fail.
Considering that the phone stop working after turn it off removing the battery, there is the posibility that the battery or the phone is damaged ?
Click to expand...
Click to collapse
Can you please share with me how did you manage to get your phone in SW upgrade mode, I am undergoing the "Remote partitons does not exist" problem too.
Long story short....in my efforts to flash the 10B TOT file, the flash tool got to 94% and started the phone reboot step, but the phone never rebooted thus the flash was a failure. When I tried to re-do the steps to flash the 10B TOT, I found out that I was no longer able to get into download mode. In my computer's device settings, when the phone is connected with a USB it now shows up as Qualcomm HS-USBQloader 9008. I looked up the threads about this problem and started the process of getting this fixed using the BoardDiag tool, but that process fails at the part where I attempt to run the AP and EMMC tests (gives me a message saying "Device was not found in DLOAD trying to install flasher). I have not found any practical fix for this error.
Am I completely screwed now, or is there a step somewhere I'm missing? I've been at this for 5 hours.
ChiefIlliniwek5 said:
Long story short....in my efforts to flash the 10B TOT file, the flash tool got to 94% and started the phone reboot step, but the phone never rebooted thus the flash was a failure. When I tried to re-do the steps to flash the 10B TOT, I found out that I was no longer able to get into download mode. In my computer's device settings, when the phone is connected with a USB it now shows up as Qualcomm HS-USBQloader 9008. I looked up the threads about this problem and started the process of getting this fixed using the BoardDiag tool, but that process fails at the part where I attempt to run the AP and EMMC tests (gives me a message saying "Device was not found in DLOAD trying to install flasher). I have not found any practical fix for this error.
Am I completely screwed now, or is there a step somewhere I'm missing? I've been at this for 5 hours.
Click to expand...
Click to collapse
Have you installed the correct drivers for the Qualcomm HS-USBQloader for your version of windows?
Look at this guide it works perfectly. http://forum.xda-developers.com/verizon-lg-g3/general/how-to-hardbrick-guide-using-test-t3276928
netookska05 said:
Have you installed the correct drivers for the Qualcomm HS-USBQloader for your version of windows?
Look at this guide it works perfectly. http://forum.xda-developers.com/verizon-lg-g3/general/how-to-hardbrick-guide-using-test-t3276928
Click to expand...
Click to collapse
Just to make sure I was doing everything right, I installed the Qualcomm drivers with the test mode on for driver signing. My phone, when plugged into the computer, still shows up as Qualcomm HS-USB QDLoader 9008. So it's my understanding that I don't need to do the steps which detail how I would need to break into my phone and use wires and solder. Based on everything I've read, I should be able to use the BoardDiag tool, but it keeps telling me in one fashion or another that it can't connect to the phone. Sometimes it will tell me "Check PMIC first and if still boot problem, replace AP", other times it will give me the same message I was getting originally saying "Device was not found in DLOAD trying to flash programmer".
ChiefIlliniwek5 said:
Just to make sure I was doing everything right, I installed the Qualcomm drivers with the test mode on for driver signing. My phone, when plugged into the computer, still shows up as Qualcomm HS-USB QDLoader 9008. So it's my understanding that I don't need to do the steps which detail how I would need to break into my phone and use wires and solder. Based on everything I've read, I should be able to use the BoardDiag tool, but it keeps telling me in one fashion or another that it can't connect to the phone. Sometimes it will tell me "Check PMIC first and if still boot problem, replace AP", other times it will give me the same message I was getting originally saying "Device was not found in DLOAD trying to flash programmer".
Click to expand...
Click to collapse
Have you tried to boot into DL mode remove battery reinsert battery and press vol up while connecting to computer. If you are able to get into that mode you can downgrade to the vs98510b.tot. Can you post a computer screen shot of your setup of your Boarddiag?
netookska05 said:
Have you tried to boot into DL mode remove battery reinsert battery and press vol up while connecting to computer. If you are able to get into that mode you can downgrade to the vs98510b.tot. Can you post a computer screen shot of your setup of your Boarddiag?
Click to expand...
Click to collapse
It won't let me boot into download mode.
I've attached a screenshot of what my BoardDiag screen looks like. I extracted the TOT files that the tool created to my bare C: drive because any time I tried to change the directory for the location of those files it would cause the program to crash.
ChiefIlliniwek5 said:
It won't let me boot into download mode.
I've attached a screenshot of what my BoardDiag screen looks like. I extracted the TOT files that the tool created to my bare C: drive because any time I tried to change the directory for the location of those files it would cause the program to crash.
Click to expand...
Click to collapse
Ok so when you plug in your phone to the computer does it say installing the qualcomm driver or does it just show up as the qualcomm in device manager. I had that when I bricked my phone and had to redo the wire trick. Once I did it the installing qualcomm drivers notice came up and I was able to run the boarddiag with not problem. If all else fails give the wire trick a try. Here's another similar guide that will help too. I turned off driver signing on computer bootup just for reference. http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
netookska05 said:
Ok so when you plug in your phone to the computer does it say installing the qualcomm driver or does it just show up as the qualcomm in device manager. I had that when I bricked my phone and had to redo the wire trick. Once I did it the installing qualcomm drivers notice came up and I was able to run the boarddiag with not problem. If all else fails give the wire trick a try. Here's another similar guide that will help too. I turned off driver signing on computer bootup just for reference. http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Click to expand...
Click to collapse
The first time I plugged it in after installing the Qualcomm drivers the window popped up to show that the device drivers were being installed and it completed successfully.
I'm trying to reach out to tungkick since I've seen in other threads that he has helped people who have run into the same issues I'm having. I'm hoping he can fix it without me having to crack open my phone.
ChiefIlliniwek5 said:
The first time I plugged it in after installing the Qualcomm drivers the window popped up to show that the device drivers were being installed and it completed successfully.
I'm trying to reach out to tungkick since I've seen in other threads that he has helped people who have run into the same issues I'm having. I'm hoping he can fix it without me having to crack open my phone.
Click to expand...
Click to collapse
Does your comm port in qualcomm driver in device settings and boarddiag comm port match?
Also, were you already rooted and wanted to go back to stock or what version of software were you downgrading from ( ex. 46A,47A what).
netookska05 said:
Does your comm port in qualcomm driver in device settings and boarddiag comm port match?
Click to expand...
Click to collapse
Yes it does. As far as I can tell I'm doing everything right based on the tutorials that are out there.
ChiefIlliniwek5 said:
Yes it does. As far as I can tell I'm doing everything right based on the tutorials that are out there.
Click to expand...
Click to collapse
What software are you coming from? That was the second part of my response. Take a look at this if you haven't already. http://forum.xda-developers.com/lg-...lcomm-9008-t3072091/post59881075#post59881075
netookska05 said:
What software are you coming from? That was the second part of my response. Take a look at this if you haven't already. http://forum.xda-developers.com/lg-...lcomm-9008-t3072091/post59881075#post59881075
Click to expand...
Click to collapse
So the long story is that I was originally running 47A stock with root and TWRP recovery. I was having TERRIBLE battery life and it got to the point where I couldn't take it any more so I decided to flash a CM13 nightly. I was going to test the waters to see if I could use a systemless SuperSU version with CM13 so when I flashed CM13 I also flashed SuperSU 2.68 at the same time. It turns out that's a big no-no. So when I tried to reboot, I got the error message that the secure boot failed, or something to that effect. So after looking at posts on XDA I intended on doing the "revert to 10B from 47A" method with a TOT file and the flash tool. Everything with that was working great...it got to 94% complete and got the point in the process where the phone reboots, but when the phone left download mode it never came back and the flash tool never made a re-connection with the phone to complete the end of the process. From that point on, I could not even load into download mode, thus here I am.
netookska05 said:
What software are you coming from? That was the second part of my response. Take a look at this if you haven't already. http://forum.xda-developers.com/lg-...lcomm-9008-t3072091/post59881075#post59881075
Click to expand...
Click to collapse
Ok so I used the androidbrick tool in that link you sent me and the process seems to have gone through correctly. After re-installing my battery the phone booted to the LG screen, then showed the little android guy with a progress bar, but that screen didn''t last long before the phone rebooted again and this time after the LG screen I got a screen that said "miniOS" and following that came a blue screen with the words "Factory Reset Status" and a big red number 2. So that's where I'm at now and I'm going to look up info on that to see what I do next. If you have any experience with this step please let me know.
Boot into download mode Volume up and us lg flash tool and tot again. It should say 3 when successful.
netookska05 said:
Boot into download mode Volume up and us lg flash tool and tot again. It should say 3 when successful.
Click to expand...
Click to collapse
Ok, this is where I was earlier today and when it got to about 94% complete and commanded the phone to reboot, the phone never came back to a state that allowed the flash tool to complete. I've seen some sites talk about having to hold the up volume button at a certain juncture around the time that it failed for me last time. Is there some trick to this?
netookska05 said:
Boot into download mode Volume up and us lg flash tool and tot again. It should say 3 when successful.
Click to expand...
Click to collapse
It did it again! Phone got to 100% on the flash and the tool got to the restart command, but the phone never came back on after leaving the download mode from the reboot command. I even was holding the volume up like another website said when the reboot occurred. I also changed the setting from "Upload DL" to "Board DL" as suggested by others in various threads. The error I'm getting after the tool says it failed is "USB port open FAIL!"
ChiefIlliniwek5 said:
It did it again! Phone got to 100% on the flash and the tool got to the restart command, but the phone never came back on after leaving the download mode from the reboot command. I even was holding the volume up like another website said when the reboot occurred. I also changed the setting from "Upload DL" to "Board DL" as suggested by others in various threads. The error I'm getting after the tool says it failed is "USB port open FAIL!"
Click to expand...
Click to collapse
Ok, we are back up and running! I went through all the steps again going all the way back to the androidbrick tool. This time when the phone boot into miniOS mode and was still on that animation, I hit the power button (something I saw on another post) and it took me to the AAT screen. I had seen a thread about this somewhere and followed those steps to have the phone reboot into the setup wizard and we are all good now! WHEW! The only thing that sucks is throughout this whole process I've lost well over 100 photos of my son . Oh well....I saved myself a few hundred bucks. Thanks for all of your help!!
ChiefIlliniwek5 said:
Ok, we are back up and running! I went through all the steps again going all the way back to the androidbrick tool. This time when the phone boot into miniOS mode and was still on that animation, I hit the power button (something I saw on another post) and it took me to the AAT screen. I had seen a thread about this somewhere and followed those steps to have the phone reboot into the setup wizard and we are all good now! WHEW! The only thing that sucks is throughout this whole process I've lost well over 100 photos of my son . Oh well....I saved myself a few hundred bucks. Thanks for all of your help!!
Click to expand...
Click to collapse
You sure did save and no problem glad to help. Always store photos on ext sd. Enjoy
netookska05 said:
You sure did save and no problem glad to help. Always store photos on ext sd. Enjoy
Click to expand...
Click to collapse
ChiefIlliniwek5 said:
Ok, we are back up and running! I went through all the steps again going all the way back to the androidbrick tool. This time when the phone boot into miniOS mode and was still on that animation, I hit the power button (something I saw on another post) and it took me to the AAT screen. I had seen a thread about this somewhere and followed those steps to have the phone reboot into the setup wizard and we are all good now! WHEW! The only thing that sucks is throughout this whole process I've lost well over 100 photos of my son . Oh well....I saved myself a few hundred bucks. Thanks for all of your help!!
Click to expand...
Click to collapse
I also wanted to add, I use the Mega cloud service app with 50 GB free. I have it configured to automatically back up my pictures and videos whenever I'm connected to WiFi. I save photos and videos to internal storage because it's faster and more reliable than Micro SD cards are.
roirraW "edor" ehT said:
I also wanted to add, I use the Mega cloud service app with 50 GB free. I have it configured to automatically back up my pictures and videos whenever I'm connected to WiFi. I save photos and videos to internal storage because it's faster and more reliable than Micro SD cards are.
Click to expand...
Click to collapse
@roirraW "edor" ehT Good idea I may just do that myself.
Hello Everyone,
I have a questions and hopefully some one can help me out here. My son has bricked my phone and I believe it is a soft brick... could be wrong. However, I need to find away too unbrick it.
I can get into hard reset with out issues. however with everything I do, I can't get into recovery what's so ever. The phone just hangs at the loading screen. I have talked to my son in order to find out what he did and this is exactly what he told me
He installed king root and attempted to replace-kinguser-with-supersu. However when he installed the application, it asked to reboot the phone. Well he rebooted the phone and now it is stuck at the loading screen and wont go any further than that. He also told me that he did not remove kingroot prior too the reboot. Please help! as I need my phone for work.
I am out of options on what too do. I would post the guide he used but I am limited due too the spamming regulations of the board.
Any one have an idea on how to unsoft brick this phone? I am all out of options as the only two options I have are hard boot and download mode.
Lunarman01 said:
Any one have an idea on how to unsoft brick this phone? I am all out of options as the only two options I have are hard boot and download mode.
Click to expand...
Click to collapse
According to the good people here on this thread http://forum.xda-developers.com/general/general/qa-metro-pcs-lg-k7-lgms330-t3331678 there is only a paid solution at the moment.
http://lg-firmware-rom.com/download...330-dll-for-lg-up-unbrick-lg-k330-with-lg-up/
if it is a lg k7 k330 (tmo) i followed this guide http://www.repairshopusa.com/phone/lg-k7-k330-unbrick-method/
Thank you for the information. However the lgup application does not recognize my phone. Indicates that the model is "Unknown"
Guess i am out of luck lol
Not uncommon. Sometimes you need to unplug and replug the device back in or close and reopen the program.
Thank you for the information. Does the USB debugging option need to be enabled because if it does, I don't think it is as the my computer does not recognize my device at all. Under computer, it shows as k7. However when I got into the device manager it indicated "LGE Android MTP device".
No. USB Debugging only works while booted into the system or recovery. You must be in Download Mode for the LG Up tool.
At this time, I am really frustrated as nothing is currently working at this time. Possibly because the phone just went under a hard reset. I have changed the port too 41 and ran the flash tool and that was not able too pick up my phone either. Also, I can't seem to get the lgup to work correctly as it's still not working correctly.
I have uninstalled the applications belonging too lg, rebooted and then reinstalled them and I still get the same thing. I have attached screen shots below. lgup does indicate the firmware I need, however I can't get too it lol
Message me I can fix your phone
Sent from my LG-K330 using XDA-Developers mobile app
Lunarman01 said:
At this time, I am really frustrated as nothing is currently working at this time. Possibly because the phone just went under a hard reset. I have changed the port too 41 and ran the flash tool and that was not able too pick up my phone either. Also, I can't seem to get the lgup to work correctly as it's still not working correctly.
I have uninstalled the applications belonging too lg, rebooted and then reinstalled them and I still get the same thing. I have attached screen shots below. lgup does indicate the firmware I need, however I can't get too it lol
Click to expand...
Click to collapse
If I remember right, you have to make it search for *.kdz otherwise it's looking for .tot files, which is why it's probably not seeing the firmware you need.
es0tericcha0s said:
If I remember right, you have to make it search for *.kdz otherwise it's looking for .tot files, which is why it's probably not seeing the firmware you need.
Click to expand...
Click to collapse
Yes you are correct. However the file that I have downloaded from the link below doesn't actually provide you with a kdz file. The file provided you the files that have been extracted from the kdz file, which are the (LGK330.dz) file
Ah, weird. Never worked on an LG that didn't use .tot, .kdz, or .bin files. I guess just search for *.dz and it should load according to the link the other guy put up.
peteypete206 said:
Message me I can fix your phone
Sent from my LG-K330 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you peteypete206. You have really save my phone. This issue has been resolved.
Lunarman01 said:
Thank you peteypete206. You have really save my phone. This issue has been resolved.
Click to expand...
Click to collapse
i'm having same problem in device manager , LGE android mtp device (yellow triangle with exclamation) & LGUP says device unknown.
The phone is able to go in download mode. any help will be appreciated.
I have a hard bricked k7 (k330) CHIPSET MSM8909 qdload 9008 with no partition, the solution I found here was for LG G2 & G3 because the diag program has those chipsets, please I need help with this
peteypete206 said:
Message me I can fix your phone
Click to expand...
Click to collapse
How's it going man, I need your help I have a ms330 stuck in 9008 mode with an unlocked bootloader. Everything I've tried has failed and I'm stuck. I only owned this phone for 6hrs before I screwed it up any help will be appreciated!!