Related
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Edit :-
Thank you all , i managed to unbtick using test point .!!
I know enough to tell you that I'd you can get fastboot yo work, its not bricked. Honestly I don't own the device. I own lg g3. And it might be different for this device but you can try pushing recovery from fasyboot mode using your PC. You might wanna google how to tbh and ask around ppl with similar device if possible. Pushing through fastboot/adb is most common so pushing recovery will format recovery partition and install/push new one. That will get you working recovery. (I hope). Happy flashing.
In fastboot check if bootloader is locked by running the device info command... It is not locked you have hopes... Use fastboot to flash fastboot rom package with modified emmc file and modded image...
Its locked
Only way is to do test point method or take it to a service center
#BATMAN# said:
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Click to expand...
Click to collapse
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Luiggi79 said:
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Click to expand...
Click to collapse
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
faced the same problem bro better give it in care if dnt wnt to give it to care just go to( http://en.miui.com/thread-235865-1-1.html ) or try ( http://xiaomitips.com/guide/fix-bricked-redmi-note-3-no-unlock-permission/ ) this if all didnt work go to care bro
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Luiggi79 said:
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Click to expand...
Click to collapse
im trying now! hopefully it will work :good::good:
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Stuck at mi logo
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
avrrv3689 said:
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
Click to expand...
Click to collapse
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
avrrv3689 said:
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
Click to expand...
Click to collapse
Read these carefully #DO AT YOUR OWN RISK#
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-instruction-unlock-bootloader-t3355904
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
http://forum.xda-developers.com/redmi-note-3/how-to/redmi-note3-prokenzo-guiderom-global-t3341102
:good: hit thanks if i helped you :good:
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
akhil17kr said:
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
Click to expand...
Click to collapse
Yes i think you can but im not 100% sure :good::good:
#BATMAN# said:
Yes i think you can but im not 100% sure :good::good:
Click to expand...
Click to collapse
Oh Lol , have asked many people but none of them are sure about this .. but i have asked from mi chat they said once bootloader is unlocked you can't lock it back by flashing MIUI roms as it's security feature . SO we can say unofficial method is problem if you like to switch to between ROM's but official one will not create any problems ..still not sure though have to ask who have done through Official method.
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
#BATMAN# said:
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Luiggi79 said:
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Click to expand...
Click to collapse
didn't work for me !:crying::crying:
Guide to root Mi5
First of all you should unlock the bootloader first then only we can root our MI5
If You want to Unlock the bootloader MI5 follow this link :
http://en.miui.com/thread-267361-1-1.html
You can request the unlock code with any rom - Example global or Stable rom it doesnt matter (U should enable the developer options and enable the OEM unlocking and Usb debugging on
You have to create MIUI account and request the code - You have to wait for 3 days for receive the unlock code
after received the code. u can try with MI unlock code with this app . it will say binding time is too less u have to wait some time. It will say like that . (U dont want to wait try older version of Unlocking app ) it may allow u to unlock instantly ..
Follow this guide for unlocking app : http://en.miui.com/thread-536201-1-1.html
After unlocking the bootloader u have to flash twrp recovery
check this link for recovery : https://dl.twrp.me/gemini/ ( always use latest one)
download it and flash through fastboot mode.
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
(Simple - You have TWRP recovery now)
ROOT GUIDE :
After installing TWRP recovery download super su zip file from chainfire
Download it from here : https://download.chainfire.eu/696/supersu/
flash it through TWRP ( Entering procedure for twrp by pressing power button + Volume up button)
Flashing through fastboot :
Step 1 : Connect ur phone to fastboot mode
Step 2 : Download it from this thread MI Flash tool http://xiaomiadvices.com/download-xiaomi-mi-flash-tool/
Step 3 : Download the fastboot rom this thread : http://xiaomiadvices.com/download-miui-8-global-stable-rom-fastboot-recovery-rom/
Step 4 : Flash it through fastboot mode - ( Note fastboot firmware is not in flashable extension - u have to change it the correct extension and it will work only place in C drive only (I mean which drive the os is installed ) - I attach the screenshot guide to change the extension later on - or else Google it
Step 5 : Flash it through the MI FLASH app and select flash all -
thats it
UNBRICK GUIDE: (also Relocking bootloader)
unfortunately ur device is bricked means u cant turn on ur device . any button will not work in ur phone so.. first u connect ur phone in data cable .. u might be see the QC bootloader driver will install in ur computer . After that u cant flash anything in MI flash tool . coz MI flashtool will not recognize ur device .
So .
Step 1 : Download MI5 CHINA PC suite to ur computer and install it ( English version will not work ) china version only updated
Step 2 : http://zhushou.xiaomi.com/ this link china pc suite is available
step 3 : Download firmware for our device http://en.miui.com/download-299.html download it from here (Global or Developer version thats not an issue)
Step 4 : Connect ur phone and open the pc suite . it has the option to select the update file in first menu ( I too dont know wat is written in that pc suite ) coz all is in chinese version ) check all the options u will find the option like select the update file that time u should press shift then only u can able to access the select option after that select the downloaded firmware ) simple u can see green option after selecting firmware. ( If u have doubt u can ask me in pm any time)
Step 5 : Flashing time it will take upto 30 minutes .
step 6 : After flashing it will automatically relock the bootloader .
Thats it . u have successfully unbricked the phone
(In some cases PC also not recognize the QC bootloader also .. that case is needed some hardware knowledge to open it the phone see this video to unbrick the hard stages : https://www.youtube.com/watch?v=ED96PJ-qYMM - See this video
IMPORTANT STEP :
After flashing ur mobile may not be turn on . that time put ur charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes it will on .
Sorry for my bad English
This all stuff i experienced much . So i shared with u all .
Thanks. More guide is coming soon :good:
This subforum is only for development threads..
hi i have a problem i installed custom kernel and after that my phone cannot see a sim card and saying invalid phone id etc.
what can i do now?
i tried to flash official firmware and nothing
After installing twrp is necessary to do any kind of wipes? does this method have any issues with encryption? Thanks
kurpiq said:
hi i have a problem i installed custom kernel and after that my phone cannot see a sim card and saying invalid phone id etc.
what can i do now?
i tried to flash official firmware and nothing
Click to expand...
Click to collapse
Which rom you are using??? flash the correct firmware.. if it is 7.1.2 nougat rom . flash 7.7.6 dev firmware
TheIceDragon said:
After installing twrp is necessary to do any kind of wipes? does this method have any issues with encryption? Thanks
Click to expand...
Click to collapse
No issues with your encryption
i have successfully flashed it, but the phone still cannot turn on, tried to put on charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes still cannot.... how? please help...
mi5
tyikki said:
i have successfully flashed it, but the phone still cannot turn on, tried to put on charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes still cannot.... how? please help...
Click to expand...
Click to collapse
i have this problem too for about too week, the only way you can turn on phone by flashing android 6 roms, such as ""gemini_global_images_V8.1.4.0.MAAMIDI_20161201.0000.00_6.0_global_e30a02e467.tgz"" the phone has problem with nougat.
my bootloader is unlocked but i cant change or update recovery
before two weeks ago i had miui 8.2.2 (nougat) on my phone with twrp but after restart take too long too turn on i flash it again and it is never run again on nougat ((((
---------- Post added at 10:42 AM ---------- Previous post was at 10:40 AM ----------
arunon2013 said:
Guide to root Mi5
First of all you should unlock the bootloader first then only we can root our MI5
If You want to Unlock the bootloader MI5 follow this link :
http://en.miui.com/thread-267361-1-1.html
You can request the unlock code with any rom - Example global or Stable rom it doesnt matter (U should enable the developer options and enable the OEM unlocking and Usb debugging on
You have to create MIUI account and request the code - You have to wait for 3 days for receive the unlock code
after received the code. u can try with MI unlock code with this app . it will say binding time is too less u have to wait some time. It will say like that . (U dont want to wait try older version of Unlocking app ) it may allow u to unlock instantly ..
Follow this guide for unlocking app : http://en.miui.com/thread-536201-1-1.html
After unlocking the bootloader u have to flash twrp recovery
check this link for recovery : https://dl.twrp.me/gemini/ ( always use latest one)
download it and flash through fastboot mode.
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
(Simple - You have TWRP recovery now)
ROOT GUIDE :
After installing TWRP recovery download super su zip file from chainfire
Download it from here : https://download.chainfire.eu/696/supersu/
flash it through TWRP ( Entering procedure for twrp by pressing power button + Volume up button)
Flashing through fastboot :
Step 1 : Connect ur phone to fastboot mode
Step 2 : Download it from this thread MI Flash tool http://xiaomiadvices.com/download-xiaomi-mi-flash-tool/
Step 3 : Download the fastboot rom this thread : http://xiaomiadvices.com/download-miui-8-global-stable-rom-fastboot-recovery-rom/
Step 4 : Flash it through fastboot mode - ( Note fastboot firmware is not in flashable extension - u have to change it the correct extension and it will work only place in C drive only (I mean which drive the os is installed ) - I attach the screenshot guide to change the extension later on - or else Google it
Step 5 : Flash it through the MI FLASH app and select flash all -
thats it
UNBRICK GUIDE: (also Relocking bootloader)
unfortunately ur device is bricked means u cant turn on ur device . any button will not work in ur phone so.. first u connect ur phone in data cable .. u might be see the QC bootloader driver will install in ur computer . After that u cant flash anything in MI flash tool . coz MI flashtool will not recognize ur device .
So .
Step 1 : Download MI5 CHINA PC suite to ur computer and install it ( English version will not work ) china version only updated
Step 2 : http://zhushou.xiaomi.com/ this link china pc suite is available
step 3 : Download firmware for our device http://en.miui.com/download-299.html download it from here (Global or Developer version thats not an issue)
Step 4 : Connect ur phone and open the pc suite . it has the option to select the update file in first menu ( I too dont know wat is written in that pc suite ) coz all is in chinese version ) check all the options u will find the option like select the update file that time u should press shift then only u can able to access the select option after that select the downloaded firmware ) simple u can see green option after selecting firmware. ( If u have doubt u can ask me in pm any time)
Step 5 : Flashing time it will take upto 30 minutes .
step 6 : After flashing it will automatically relock the bootloader .
Thats it . u have successfully unbricked the phone
(In some cases PC also not recognize the QC bootloader also .. that case is needed some hardware knowledge to open it the phone see this video to unbrick the hard stages : https://www.youtube.com/watch?v=ED96PJ-qYMM - See this video
IMPORTANT STEP :
After flashing ur mobile may not be turn on . that time put ur charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes it will on .
Sorry for my bad English
This all stuff i experienced much . So i shared with u all .
Thanks. More guide is coming soon :good:
Click to expand...
Click to collapse
i have problem too for about too week, the only way you can turn on phone by flashing android 6 roms, such as ""gemini_global_images_V8.1.4.0.MAAMIDI_20161201.0000.00_6.0_global_e30a02e467.tgz"", the phone has problem with nougat.
my bootloader is unlocked but i cant change or update recovery
before two weeks ago i had miui 8.2.2 (nougat) on my phone with twrp but after restart take too long (about 2hoursto turn on i flash it again and it is never run again on nougat ((((
tried to flash it with the newest MiFlash201612220 and V8.5.2.0, all successful, but it still cannot turn on.... anyone can help???
Hi after installing twrp via fastboot I am not able to enter twrp in any way, help?
hard brick Mi5
Hi! My phone brick during charge when i was asleep... he gets stuck in Mi logo and I 've tryed everything... no luck
After several types of attempts ...
in ADB window I was looking for the device with the wrong command -> is fastboot device and not adb device ... my device apears on hexadecimal
in mi flash comes the same id of the fastboot ADB (hexadecimal) and not the expectable COM "1"
I tried to flash fastboot rom without success, it says that I have the device locked ...
I have already filled in the form to unlock the bootloader already five months ago and I never received the code
- via fastboot ADB (recognizes the terminal but its designation is hexadecimal and not COM as intended) i already install all drivers , include qualcomm, but it never apears no manager device...
- via EDL (popup mode) is not possible because it is locked
- Mi unluck - blocks us 99% and says that "corrent acount is not bound to this device"
- Mi flash - recognize the device (hexadecimal), try to flash the rom via fastboot and says that the device is locked
I am desperate and without options ...
i think some hardware may be burn...
Hello there
I think I have bricked my phone quite bad. I tried the things you said but still the phone does not switch on. The interesting thing is that the green indicating light switches on and also when I press the power button the phone vibrates. I dont know what else should I do. Can you also tell me if I really have to press power + volume up and down + home button for 5 mins?
Thanks for the reply in advance.
Hii Friends,
I am new to xda as i got an problem with my Redmi Note 3.
Specs Before Dead:
Miui 8.2.4
Android 6.0
32 Gb Rom,3 Gb Ram
I was trying to flash Android 8.0 Rom via Twrp {Flashed Through Mi Flash Tool}. Twrp Flashed Successfully and Then I started with flashing with Oreo Rom.It also got flashed successfully but the problem I think is I forgot to flash Lazy Flasher due to which the phone booted but was lock even though i entered the right password It started to reset the phone. Then the phone turned off never revived from there.
As I tried to power up many times and tried almost all the combination Keys like Power+Vol up,Power+Vol down,Power+Vol up+Vol Down,etc.Only Red Light is blinking while connected to charging or PC. In PC the Port shows Qualcomm 900E and cannot be recognized in Mi Flash Tool. As Mi flash tool detects Qualcomm 9008.Even I manually Tried to change the driver to 9008 but didn't help me to flash the ROM.Shown an error: Device attached is not working; in Mi Flash Tool
Even I showed in a repair center near me but he ended up with no solution even. I have been trying to get it in Edl mode so that i can flash Fast boot Rom but no clue for that.
If any clue for this would be really appreciated!!!
Your Believer
R$(Rishabh Sharma)
Thinker Hour =)
Here you go:
https://forum.xda-developers.com/re...mi-note-3-pro-special-edition-mm-rom-t3453470
Say if it was working
Useless Thread Dude
Maximaro said:
Thinker Hour =)
Here you go:
https://forum.xda-developers.com/re...mi-note-3-pro-special-edition-mm-rom-t3453470
Say if it was working
Click to expand...
Click to collapse
As I mentioned all the problem in the thread....there's nothing wrong with bootloader.
Thanks but no thanks
More info required: Official unlock or Unofficial unlock?
After flashing oreo ROM lazy flasher is not required you need to format data ( apart from wiping data ) to boot the device.
when connected to PC when the red light is blinking that means you're in EDL mode, now try holding power + vol down button, keep holding until you get a vibration & get into fastboot mode.
Then you can use fastboot commands to check if the bootloader is still unlocked & can flash TWRP again if erased.
But, if device is unable to enter fastboot mode then you must flash MIUI fastboot ROM through EDL.
The procedure is the same for flashing but you need appropriate drivers en.miui.com/forum.php?mod=attachment&aid=NzU4MzF8ZWU0ZWM1OTR8MTM5ODc1NDUzM3w2NDg1MDkzM3wxOTY5Nw%3D%3D
look like EDL mode
I can buy ur phone if u want to sell it. Reply if u r interested.
Unofficial Unlock
VaibhavKumar07 said:
More info required: Official unlock or Unofficial unlock?
After flashing oreo ROM lazy flasher is not required you need to format data ( apart from wiping data ) to boot the device.
when connected to PC when the red light is blinking that means you're in EDL mode, now try holding power + vol down button, keep holding until you get a vibration & get into fastboot mode.
Then you can use fastboot commands to check if the bootloader is still unlocked & can flash TWRP again if erased.
But, if device is unable to enter fastboot mode then you must flash MIUI fastboot ROM through EDL.
The procedure is the same for flashing but you need appropriate drivers
I have tried holding all the combination keys as mentioned earlier but no results. So without getting in Fastboot mode i cannot flash the rom and I don't think so that my device is in EDL mode because PC device manager shows Qualcomm 900E instead of 9008.
Thanks for replying to the thread and please provide other solution.
Click to expand...
Click to collapse
OK
forever.parv said:
I can buy ur phone if u want to sell it. Reply if u r interested.
Click to expand...
Click to collapse
ok
Hello,
Is there a solution to this problem? I too have the exact issue now.
Thanks
Rahim.
I am ready to buy the phone + also can help you solve the issue.. which one do you want
Test Point Method
bro just go for test point method, it works for me
for that use have open backcover of your phone
Solution please
evansourav said:
I am ready to buy the phone + also can help you solve the issue.. which one do you want
Click to expand...
Click to collapse
It would be great if u provide a solution for this.
Rishabh Sharma_10 said:
It would be great if u provide a solution for this.
Click to expand...
Click to collapse
Can you turn off the device?
Yudhz® said:
look like EDL mode
Click to expand...
Click to collapse
Yeah his phone in EDL mode. I went through this problem. Now everything is working fine.
---------- Post added at 05:19 PM ---------- Previous post was at 05:15 PM ----------
You're already in EDL mode. So start from edl part. Try this... http://en.miui.com/thread-235865-1-1.html
evansourav said:
Can you turn off the device?
Click to expand...
Click to collapse
The device is already dead.
What happens when you plug charger? What about Qualcomm QHSUSB BULK? Is it showing up in EDL? Vibration Works? LCD Backlight Turns On?
santoshbodake said:
bro just go for test point method, it works for me
for that use have open backcover of your phone
Click to expand...
Click to collapse
Once happened to me this method worked for me
same issue here have you got any solution
This happens to me once...but i got it solved. This is really an edl mode of the phone. Keep trying connecting it to pc and try pressing those volume and power buttons if there is any voice connecting to pc means your phone is not dead. So, keep trying.
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778
Here, this helped me. If you follow the instructions correctly, you will be able to unlock bootloader, boot into twrp and then flash your custom rom. Skip to the part when you will have the red led blinking.
Hope it helps.
it is unlocked with twrp recevory and I flashed the new stabil rom miui_POCOF1Global_V10.1.3.0.PEJMIFI_f05771189d_9.0 zip,via twrp ,before flash new rom It has miui_POCOF1Global_V10.0.6.0.OEJMIFH_c5f0857b02_8.1 rom,twrp and root (magisk), afterthat it is bootlooping ,power off and bricked.no recovery mode,no fastboot mode ,only edl mode working.
I have tried the unbrick it with edl mode(no problem on edl mode win 10 64 bit Pc ).I have used Miflash exe, xiaomi miflash exe,Qualcomm_Flash_Image_Loader,AFTool,Miflash,bla bla what ever I know . I had changed cable,changed usb port,changed programs , no result.
need more idea,please
hope that somebody could you give a some solution
Sent from my [device_name] using XDA-Developers Legacy app
ayhanaykut said:
it is unlocked with twrp recevory and I flashed the new stabil rom miui_POCOF1Global_V10.1.3.0.PEJMIFI_f05771189d_9.0 zip,via twrp ,before flash new rom It has miui_POCOF1Global_V10.0.6.0.OEJMIFH_c5f0857b02_8.1 rom,twrp and root (magisk), afterthat it is bootlooping ,power off and bricked.no recovery mode,no fastboot mode ,only edl mode working.
I have tried the unbrick it with edl mode(no problem on edl mode win 10 64 bit Pc ).I have used Miflash exe, xiaomi miflash exe,Qualcomm_Flash_Image_Loader,AFTool,Miflash,bla bla what ever I know . I had changed cable,changed usb port,changed programs , no result.
need more idea,please
Click to expand...
Click to collapse
Yo any change yet?
RangerSpartan said:
Yo any change yet?
Click to expand...
Click to collapse
yes,found authorized user to flash rom via edl. paid 35$, no problem
I'm facing the same Issue. However, my phone got bricked during an update. Bootloader is locked. Can anyone help. Phone still bricked.
ThunderEmperor said:
I'm facing the same Issue. However, my phone got bricked during an update. Bootloader is locked. Can anyone help. Phone still bricked.
Click to expand...
Click to collapse
Use mi flash tool and flash the phone
rizwm14 said:
Use mi flash tool and flash the phone
Click to expand...
Click to collapse
In brick phone you can't go to fastboot mode
SamyakJ said:
In brick phone you can't go to fastboot mode
Click to expand...
Click to collapse
Is it hard bricked ?
rizwm14 said:
Is it hard bricked ?
Click to expand...
Click to collapse
I don't know because it's not my device
SamyakJ said:
I don't know because it's not my device
Click to expand...
Click to collapse
It's not hardbricked. I'm able to go into Fastboot, but when i try using the Mi tool to Flash it, i get am error message that, " Cannot Flash when Device is locked"
ThunderEmperor said:
It's not hardbricked. I'm able to go into Fastboot, but when i try using the Mi tool to Flash it, i get am error message that, " Cannot Flash when Device is locked"
Click to expand...
Click to collapse
Your device is hard bricked, you cannot access EDL when bootloader is locked. You have to bring your device via nearest Xiaomi service center. I think you will pay for a fee.
---------- Post added at 02:03 AM ---------- Previous post was at 01:26 AM ----------
I made a thread on how unbrick by installing flash stable rom via fastboot (EDL Mode)
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
hello i bricked my poco an no one in my country (iran) can help me . and there is no xiaomi center here. i can not go to fastboot or recovery after update . i can not flash rom by anythings (mi flash tools .box and ............................) itis on edl mode all time . its bootloader unlocked . and when i want to flash rom some errors like port is busy . cannot reccive hello pocket and ...................... please someone help me i am not a person who can buy another one .even i looked for nand flash memory to buy but i couldnt found
please someone help me i will appreciate you all of my life
Zanaxx said:
hello i bricked my poco an no one in my country (iran) can help me . and there is no xiaomi center here. i can not go to fastboot or recovery after update . i can not flash rom by anythings (mi flash tools .box and ............................) itis on edl mode all time . its bootloader unlocked . and when i want to flash rom some errors like port is busy . cannot reccive hello pocket and ...................... please someone help me i am not a person who can buy another one .even i looked for nand flash memory to buy but i couldnt found
please someone help me i will appreciate you all of my life
Click to expand...
Click to collapse
If its on edl mode then its hard bricked. Unfortunately only Xiaomi service center can help you
there is no xiaomi center in iran
Zanaxx said:
there is no xiaomi center in iran
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=g9FvBILowvA
kuto232 said:
https://www.youtube.com/watch?v=g9FvBILowvA
Click to expand...
Click to collapse
i will try it i wish it could help
Zanaxx said:
hello i bricked my poco an no one in my country (iran) can help me . and there is no xiaomi center here. i can not go to fastboot or recovery after update . i can not flash rom by anythings (mi flash tools .box and ............................) itis on edl mode all time . its bootloader unlocked . and when i want to flash rom some errors like port is busy . cannot reccive hello pocket and ...................... please someone help me i am not a person who can buy another one .even i looked for nand flash memory to buy but i couldnt found
please someone help me i will appreciate you all of my life
Click to expand...
Click to collapse
slm dada.xobi?chikar krdi k brick shod??rom eshtebah zadi o bootloader ro basti k injoori shod?
master76rz said:
slm dada.xobi?chikar krdi k brick shod??rom eshtebah zadi o bootloader ro basti k injoori shod?
Click to expand...
Click to collapse
سلام نه رام اشتباه نبودش همین اخرین ورژن بودش که زدم کامل هم فلاش شد و زد موفق نمیدونم چرا بالا نیومد دیگه هیچ واکنشی نداره گوشی فقط رو edl مونده همینجوری
Zanaxx said:
سلام نه رام اشتباه نبودش همین اخرین ورژن بودش که زدم کامل هم فلاش شد و زد موفق نمیدونم چرا بالا نیومد دیگه هیچ واکنشی نداره گوشی فقط رو edl مونده همینجوری
Click to expand...
Click to collapse
az twrp nasb krdi?qaedatan nbyd injoori mishod.mn hftei 2 ta rom miznm
raveshi k balatr yki gft(utube) ro emthan krdi?
@Zanaxx and @master76rz
Please post in English. That is one of the rules of XDA. I know that it is not your mother tongue. Still you have to use English. Please co-operate.
master76rz said:
az twrp nasb krdi?qaedatan nbyd injoori mishod.mn hftei 2 ta rom miznm
raveshi k balatr yki gft(utube) ro emthan krdi?
Click to expand...
Click to collapse
on ravesh baraye zamani hastesh ke beshe raft to fastboot man kollan to edl mod hastam , har bar ke mizanam khata miare
tnsmani said:
@Zanaxx and @master76rz
Please post in English. That is one of the rules of XDA. I know that it is not your mother tongue. Still you have to use English. Please co-operate.
Click to expand...
Click to collapse
ok sorry
kuto232 said:
https://www.youtube.com/watch?v=g9FvBILowvA
Click to expand...
Click to collapse
it does not work this way becuse i can not go to fastboot or recovery and unbricking feature it doesnt available yet in this program
Zanaxx said:
it does not work this way becuse i can not go to fastboot or recovery and unbricking feature it doesnt available yet in this program
Click to expand...
Click to collapse
you can boot into recovery?
Zanaxx said:
it does not work this way becuse i can not go to fastboot or recovery and unbricking feature it doesnt available yet in this program
Click to expand...
Click to collapse
SEND ME PM IN TELEGRAM BRO...I WILL JOIN U SOME GP MAYBE THEY CAN HELP U.ALSO .USE THIS METHOD THAT I RESEARCH FOR U
Probably you have the Anti-Rollback activated and tried to flash another ROM. After a successful installation your phone just went dead.
Here's how you could fix it (or how I fixed it):
1. Windows PC with MiFlash Beta (!) tool
2. Download a Xiaomi Fastboot Rom (ends with *.tgz)
http://bigota.d.miui.com/8.8.30/nitr...66dfc4bb58.tgz
--> Beta (MIUI 10 8.8.30) (ANTI ROLL-BACK ACTIVATED!!!)
3. extract Rom to your PC
4. start MiFlash Beta tool and point to the extracted folder
5. press Vol+ & Vol- & Power on your MiMax3 for 10 seconds and connect it to your PC while holding the buttons another second after plugging it in
6. press refresh button on MiFlash tool
7. if your drivers are installed correct, your phone should be visible on COM-Port XXX
8. press flash and hopefully it will be flashed
9. if not: try several times
10. wait until it boots to the welcome screen (around 5 mins)
now your phone should be useable again.
If you want Treble-Rom to be installed, then go on:
11. turn phone off --> go into fastboot mode (Vol- & Power) --> install TWRP --> boot into TWRP
12. wipe date = yes --> reboot TWRP
13. make yourself a MiRom at https://mi-globe.com/rom-builder-fea...lname=Mi+Max+3
--> I used 8.8.30 version, and choose "advanced settings"--> set Magisk for root and build your zip
14. flash it through TWRP
15. reboot --> you will end up in a bootloop, but thats okay
16. go back to TWRP: swipe factory reset
17. install treble.img + gapps + Magisk and reboot and you're all good
ISHALA K NATIJE BGIRI DADASH TO IN VAZE GROONI
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
Zanaxx said:
it does not work this way becuse i can not go to fastboot or recovery and unbricking feature it doesnt available yet in this program
Click to expand...
Click to collapse
SEE HERE
https://forum.xda-developers.com/mi-max-3/how-to/to-youre-stuck-edl-mode-black-screen-t3837846
IF IT WORKS COME AND SAY IT BRO...ITS VERY IMPORTNAT TO SHARE UR INFO:fingers-crossed:
And just remember that some people observe problems flashing on a system with Ryzen CPU. So if this is your case also, try doing all this stuff on computer with Intel CPU
master76rz said:
SEND ME PM IN TELEGRAM BRO...I WILL JOIN U SOME GP MAYBE THEY CAN HELP U.ALSO .USE THIS METHOD THAT I RESEARCH FOR U
Probably you have the Anti-Rollback activated and tried to flash another ROM. After a successful installation your phone just went dead.
Here's how you could fix it (or how I fixed it):
1. Windows PC with MiFlash Beta (!) tool
2. Download a Xiaomi Fastboot Rom (ends with *.tgz)
http://bigota.d.miui.com/8.8.30/nitr...66dfc4bb58.tgz
--> Beta (MIUI 10 8.8.30) (ANTI ROLL-BACK ACTIVATED!!!)
3. extract Rom to your PC
4. start MiFlash Beta tool and point to the extracted folder
5. press Vol+ & Vol- & Power on your MiMax3 for 10 seconds and connect it to your PC while holding the buttons another second after plugging it in
6. press refresh button on MiFlash tool
7. if your drivers are installed correct, your phone should be visible on COM-Port XXX
8. press flash and hopefully it will be flashed
9. if not: try several times
10. wait until it boots to the welcome screen (around 5 mins)
now your phone should be useable again.
If you want Treble-Rom to be installed, then go on:
11. turn phone off --> go into fastboot mode (Vol- & Power) --> install TWRP --> boot into TWRP
12. wipe date = yes --> reboot TWRP
13. make yourself a MiRom at https://mi-globe.com/rom-builder-fea...lname=Mi+Max+3
--> I used 8.8.30 version, and choose "advanced settings"--> set Magisk for root and build your zip
14. flash it through TWRP
15. reboot --> you will end up in a bootloop, but thats okay
16. go back to TWRP: swipe factory reset
17. install treble.img + gapps + Magisk and reboot and you're all good
ISHALA K NATIJE BGIRI DADASH TO IN VAZE GROONI
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
SEE HERE
https://forum.xda-developers.com/mi-max-3/how-to/to-youre-stuck-edl-mode-black-screen-t3837846
IF IT WORKS COME AND SAY IT BRO...ITS VERY IMPORTNAT TO SHARE UR INFO:fingers-crossed:
Click to expand...
Click to collapse
thanks i will try it i hope it sucsess
master76rz said:
SEND ME PM IN TELEGRAM BRO...I WILL JOIN U SOME GP MAYBE THEY CAN HELP U.ALSO .USE THIS METHOD THAT I RESEARCH FOR U
Probably you have the Anti-Rollback activated and tried to flash another ROM. After a successful installation your phone just went dead.
Here's how you could fix it (or how I fixed it):
1. Windows PC with MiFlash Beta (!) tool
2. Download a Xiaomi Fastboot Rom (ends with *.tgz)
http://bigota.d.miui.com/8.8.30/nitr...66dfc4bb58.tgz
--> Beta (MIUI 10 8.8.30) (ANTI ROLL-BACK ACTIVATED!!!)
3. extract Rom to your PC
4. start MiFlash Beta tool and point to the extracted folder
5. press Vol+ & Vol- & Power on your MiMax3 for 10 seconds and connect it to your PC while holding the buttons another second after plugging it in
6. press refresh button on MiFlash tool
7. if your drivers are installed correct, your phone should be visible on COM-Port XXX
8. press flash and hopefully it will be flashed
9. if not: try several times
10. wait until it boots to the welcome screen (around 5 mins)
now your phone should be useable again.
If you want Treble-Rom to be installed, then go on:
11. turn phone off --> go into fastboot mode (Vol- & Power) --> install TWRP --> boot into TWRP
12. wipe date = yes --> reboot TWRP
13. make yourself a MiRom at https://mi-globe.com/rom-builder-fea...lname=Mi+Max+3
--> I used 8.8.30 version, and choose "advanced settings"--> set Magisk for root and build your zip
14. flash it through TWRP
15. reboot --> you will end up in a bootloop, but thats okay
16. go back to TWRP: swipe factory reset
17. install treble.img + gapps + Magisk and reboot and you're all good
ISHALA K NATIJE BGIRI DADASH TO IN VAZE GROONI
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
SEE HERE
https://forum.xda-developers.com/mi-max-3/how-to/to-youre-stuck-edl-mode-black-screen-t3837846
IF IT WORKS COME AND SAY IT BRO...ITS VERY IMPORTNAT TO SHARE UR INFO:fingers-crossed:
Click to expand...
Click to collapse
it doesnt work this way error the phone can not read com port happened
Zanaxx said:
it doesnt work this way error the phone can not read com port happened
Click to expand...
Click to collapse
read whole page that i gave to u...hope it work man..but if u find soloution send us man
it will be great if i could someone that i can trust him in india or any country that they have xiaomi centers to send him the phoneand that person take it to xiaomi centers and ofcourse i will pay all off is payment
but really is there any one in this bad world that i can trust him?
it seems some people have this problem with last update too
and noone in xiaomi center answer us
and no fukhing one can fix it