Related
Over a year has passed since the Note PRO came out. Which is the best screen protector as of today? Has any of you used the Anoke Tempered Glass Screen Protectors 9h hardness, 2.5d Rounded Edges, 0.3mm Thickness? It seems to have received very good overall reviews.
I am still using a plastic-like screen protector from Samsung. I got it as a gift from an electronics store. The problem with it is that it is a finger print magnet. Also, as I use the device as a phone, it is easy to see lots of saliva droplets as I talk to the screen sometimes.
petercohen said:
Over a year has passed since the Note PRO came out. Which is the best screen protector as of today? Has any of you used the Anoke Tempered Glass Screen Protectors 9h hardness, 2.5d Rounded Edges, 0.3mm Thickness? It seems to have received very good overall reviews.
I am still using a plastic-like screen protector from Samsung. I got it as a gift from an electronics store. The problem with it is that it is a finger print magnet. Also, as I use the device as a phone, it is easy to see lots of saliva droplets as I talk to the screen sometimes.
Click to expand...
Click to collapse
I wont recommend a tempered glass as the extra thickness will interfere with the S-pen
petercohen said:
Over a year has passed since the Note PRO came out. Which is the best screen protector as of today? Has any of you used the Anoke Tempered Glass Screen Protectors 9h hardness, 2.5d Rounded Edges, 0.3mm Thickness? It seems to have received very good overall reviews.
I am still using a plastic-like screen protector from Samsung. I got it as a gift from an electronics store. The problem with it is that it is a finger print magnet. Also, as I use the device as a phone, it is easy to see lots of saliva droplets as I talk to the screen sometimes.
Click to expand...
Click to collapse
I used a tempered glass that i bought from aliexpress for 4.4 USD
It is good but finger prints are there too
I applied it for protection only
There are no problems with the spen as far as i know
I was going to post the link but the item is already removed
Still perfectly satisfied with my Mime tempered glass screen protector. I have no significant issue with pen use. The only issue is the gap around the bezel but I don't care one iota about that.
Sent from my SM-P900 using Tapatalk
Any glass recommendations for the BLU R1 HD device?
I am looking for the same. I found some on AMZN but dont know if to bite the bullet on them.
Amazon Screen Protectors
Honestly I wasn't going to put one on, because for me it's just a cheap backup, But after one day of use I already have a few very small scratches on the top right hand corner, Gorilla Glass 3 isn't doing great and my OCD is already bothering me.
If I get scratches on the actual screen area I'll lose it lol
On Amazon their are three choices and honestly they very well may all be manufactured by the same company based on the listings
BLU R1 HD Screen Protector [Tempered Glass], Popsky 0.26MM Ultra Thin 9H Hardness High Definition HD Scratch Proof Premium Screen Protector Glass Protective Film $8.50 w/ Shipping
[2 Pack] BLU R1 HD Screen Protector, Nearpow® [Tempered Glass] Screen Protector with [9H Hardness] [Crystal Clear] [Easy Bubble-Free Installation] [Scratch Resist] $9.99 - Free Prime Shipping
BLU R1 HD Tempered Glass Screen Protetor, Vikoo Scratch Proof 0.26MM Ultra-thin 9H Hardness Shatterproof High Definition HD Ultra Clear Screen Protector Glass for BLU R1 HD Phone - $8.30 with shipping
They are all 0.26MM
They all have 2.5D edges (which should match better with the 2.5d screen
They all have oleophobic coating
They all list Anti scratch/shatter/explosion.
My advice would be that if you want a backup protector and have prime go for the second one, otherwise the last one is 20 cents cheaper and most likely they are all the same screen protector just repacked by different companies which is extremely common. For a buck and some change more I'll probably go with the second one and let you know how it goes.
I ordered the one from Nearpow. I will update this when it comes in and I install on my BLU R1 HD.
thirdlobe said:
I ordered the one from Nearpow. I will update this when it comes in and I install on my BLU R1 HD.
Click to expand...
Click to collapse
Looking forward to your review as I'm looking at that one myself.
I got this one early on.
https://www.amazon.com/gp/product/B01I61Y33Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
When I received the product, it didn't look like the one in the picture. Honestly, the shape and the cut outs looked like the other ones you listed. Fit was horrible. The Blu has a lot of curve and the edges weren't able to seal. Lots of lift around all the borders. Hopefully, these other ones are better.
Any updates on best screen protectors, no scratches yet, but i have saw a post or two about how easy this screen scratches.
The one I purchased arrived last night and I took off 6 for a .99$ plastic protector that I bought. That protector never say well so I gave the glass a try. Unfortunately the glass one sat just as poorly. Where the cut outs were for the camera and the LED the glass did not fit flush against the phone and showed as it was lifted.
I have taken both off and am just using the phone naked.
IMO
In my personal experience *most* screen protectors are created equal. My sister bought one off Amazon for 10$ and I bought one for 1.50$ on Ebay, When they arrived her's was in a fancier box but inside the boxes they had almost exactly the same contents. I tried scratching mine with a knife, and it didn't scratch (so it was glass). I'd say it is worth the risk (only 1.50 shipped in the same time as amazon one)
EvoKnvl said:
I got this one early on.
https://www.amazon.com/gp/product/B01I61Y33Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
When I received the product, it didn't look like the one in the picture. Honestly, the shape and the cut outs looked like the other ones you listed. Fit was horrible. The Blu has a lot of curve and the edges weren't able to seal. Lots of lift around all the borders. Hopefully, these other ones are better.
Click to expand...
Click to collapse
I bought the nearpow one and the fit was awful, because of the 2.5D glass it just didn't adhere on the sides at all and it wasn't even close to full coverage. I've chosen not to worry too much about the screen, it's a $60 phone.
I just bought a cheap case that has a bit of a lip to stop the screen from touching stuff. If I place it face down for example.
movielover76 said:
I bought the nearpow one and the fit was awful, because of the 2.5D glass it just didn't adhere on the sides at all and it wasn't even close to full coverage. I've chosen not to worry too much about the screen, it's a $60 phone.
I just bought a cheap case that has a bit of a lip to stop the screen from touching stuff. If I place it face down for example.
Click to expand...
Click to collapse
Same, because the phone screen is not square in the sides the protector don't adhere like it's supposed too
Does anyone like the nearpow ones from amazon? I bought the box with two of them but haven't put one on yet. I'm wondering if it's even worth trying since reports so far don't seem to good. I can see where it might be more challenging to make them for a screen with rounded edges. I have two of the phones now and like them very much so am interested in protecting them.
I purchased this one:
"BLU R1 HD Tempered Glass Screen Protector, Vikoo Scratch Proof 0.26MM Ultra-thin 9H Hardness High Definition HD Ultra Clear Screen Protector Glass for BLU R1 HD Phone"
from amazon.
Does not fit cleanly.
Given all these reports I am beginning to wonder if these are even tested or manufacturers just assume it will work once cut out to size.
Sadly, i'm just joining in the bad news. I purchased the Qosea Ultra-thin 2.5D 9H Hardness Crystal Clear Scratch Resistant Tempered Glass Screen Protector for BLU R1 HD and so far it-s the same result, it doesn-t stick on the edges because of the curvature of the screen. I'm still using it because i don't want to ruin the screen so i'll be waiting for the confirmation of a tempered glass that actually fits the screen properly.
I'm a bit baffled reading all the comments here and on amazon. It truly seems like nobody tested these things. I-m starting to think there are fake commenters because each glass protector have at least one 5 star review telling about how amazingly fits. Followed by nothing but unsatisfied people.
I have had mine since release and it's still in good shape. Don't see a point in getting any protector for such a cheap phone.
Well it's not exactly tempered glass but the reviews are better as to fit. Apparently it's a hard plastic. I'm getting this phone for my kid so something needs to go on there becasue he's not exactly not clumsy.
https://www.amazon.com/dp/B01HQOTA1M/ref=psdc_2407781011_t3_B01N4DEMZY
Hello,
i just received my Nillkin 3D CP+ Max tempered glass two hours ago,
and guess what? it was damaged 10 minutes later because of my casology vault 1 case!
i wonder what should i do to protect my phone's screen from drops?
any ideas about Anything compatible with that case i should use to protect my phone?
seems like all glass protectors are the same with the cases , also other soft protector isn't designed to protect the phone against drops
what should i do?
Honestly i'm giving up!
I break 3 tempered glass screen protectors with small 0.5m drops. Reason is different from yours. Due to our edge screen, temper glass will get cracked easily.
For your case, u should look for " case friendly " screen protectors. Find those which does not cover the edges or/and full screen. Can be tempered glass, PET or healing verison.
I tried without screen protector. The conclusion is very nice screen but gorilla glass 5 is NOT scratch proof. I got some minor scratches.
In Singapore, we have plenty in physical shops, and online shops like q10sg and lazada etc. selling mobile phone accessories. So i have no links to share with you. Just search for some " case friendly " screen protectors.
Ps:
I wasted about sgd100 on screen protectors. Hahah
I gave up on tempered glass. I use spigen neo flex wet apply for now. Going for lifeproof fre when it comes out.
I basically gave up on TGSP's on these types of devices as well. Display is holding up pretty well w/ my rough handling, haven't seen any scratches yet but I'm sure it'll have some sometime down the line. Lol
Ive spent over $100 on screen protectors for the S8 (whitestone dome was $45) and not a single one has worked. The amount of money Ive paid would have paid for 9 months of Samsung Premium care and with the free month Id get 10 months of insurance which is longer than Ill have this phone. Yes Id still have to pay a $99 deductible but Id have a perfect phone in 24 hours if I break it vs no insurance and a box of useless screen protectors.
Ive been able to return all but one protector so Ive decided to focus my money on insurance and peace of mind knowing that when it breaks Ill have a new one.
Skip the screen protectors and get insurance. The headache is just not worth it. If the scratches get to the point of bothering you, start carrying the phone naked. Eventually you're going to need to file a claim.
Here's another one https://forum.xda-developers.com/galaxy-s8+/accessories/type-screen-adhseive-glass-sort-t3618285
Give this one a try. Working flawlessly on my device.
https://www.amazon.co.uk/gp/product/B06XSFTKY1/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I've just got one of those plastic screen protectors from Invisible Shield that doesn't go all the way to the edge. It does the job. Either way, with or without a protector, your phone is still vulnerable to drops.
Praetore said:
I've just got one of those plastic screen protectors from Invisible Shield that doesn't go all the way to the edge. It does the job. Either way, with or without a protector, your phone is still vulnerable to drops.
Click to expand...
Click to collapse
Second that. Using a SKINOMI case friendly one with a Spigen Slim Armour for almost 2 without issue.
Airax
Airax said:
Second that. Using a SKINOMI case friendly one with a Spigen Slim Armour for almost 2 without issue.
Airax
Click to expand...
Click to collapse
Oh yeah, I should've mentioned -- I've got a Spigen Neo Hybrid and it slips on/off without any issues and works with the protector.
I've had the same exact issue. I've bought the Spigen Ultra Hybrid case (perfect case by the way, I love it, had the same on my Nexus 6, showcases the back of the phone while protecting it just as well as the well-known neo hybrid case). I knew that the tempered glass screen protectors won't work with it well and I didn't want to waste my money on them. I looked for something different. I ended up buying the official screen protector for under $10 (you get 2 for the price) (this one, only for S8 instead of S8+: https://forum.xda-developers.com/galaxy-s8/accessories/official-samsung-s8-screen-protector-t3600373 , model number is Samsung ET-FG950CT).
I thought it might fit with the case. But when I came home, after a while I realized that this isn't gonna work. So I was deciding what to do, return the protector? But then I'd have to find another one, which might be long and expensive journey. I didn't want that.
So I grabbed my scissors and started to cut the protector carefully. There was not much I could lose. I cutted it to the point where it doesn't interfere with the case, but covers pretty much the whole display. It isn't the most elegant solution, but it works and I am satisfied with it. And I still got one screen protector to repeat the process in case this one ever gets damaged
MamomaN said:
Hello,
i just received my Nillkin 3D CP+ Max tempered glass two hours ago,
and guess what? it was damaged 10 minutes later because of my casology vault 1 case!
i wonder what should i do to protect my phone's screen from drops?
any ideas about Anything compatible with that case i should use to protect my phone?
seems like all glass protectors are the same with the cases , also other soft protector isn't designed to protect the phone against drops
what should i do?
Honestly i'm giving up!
Click to expand...
Click to collapse
The tempered glass that works for me is the Ankoon tempered glass screen protector. The screen protector just covers up to about where the edge begins to curve. In that way when you put a case on it, it doesn't rub up against it were it bends the tempered glass protector.
I have the GS8 with the Spigen Neo Hybrid case and I do not have any problems with the tempered glass screen protector lifting against the case. If you do get this tempered glass screen protector, I would advise you to get the 2-pack of this screen protector since its not that much more than the single pack and you have a spare screen protector handy to replace the current screen protector if it starts to break down.
https://www.amazon.com/Protector-Te...e=UTF8&qid=1497450827&sr=8-10&keywords=ANKoon
ericdabbs said:
The tempered glass that works for me is the Ankoon tempered glass screen protector. The screen protector just covers up to about where the edge begins to curve. In that way when you put a case on it, it doesn't rub up against it were it bends the tempered glass protector.
I have the GS8 with the Spigen Neo Hybrid case and I do not have any problems with the tempered glass screen protector lifting against the case. If you do get this tempered glass screen protector, I would advise you to get the 2-pack of this screen protector since its not that much more than the single pack and you have a spare screen protector handy to replace the current screen protector if it starts to break down.
https://www.amazon.com/Protector-Te...e=UTF8&qid=1497450827&sr=8-10&keywords=ANKoon
Click to expand...
Click to collapse
i opened the link at amazon and i saw A LOT of angry people reviewing the Protector
Same, I would only trust full adhesive ones and not ones with adhesives on the sides only.
I guess I got lucky on mine. Have the S8 Plus and have had no problems at all with my screen protector. I read up on them beforehand and read plenty of reviews and just decided to not even attempt a glass screen protector.
I ordered two kinds on Amazon. The IQ Shield liquid skin, and the Spigen Neo-flex. I put the IQ Shield on, took maybe 10 minutes, and haven't had a single issue after about a month now, all the edges are still stuck down. It's very clear and seems durable. It reminds me of a Zagg invisible shield but not nearly as "rubbery" feel. It feels like a cross between a Zagg invisible shield and a glass one. I'm still on the first one so haven't had a chance to compare it to the Spigen and I also have a spare IQ Shield.
I also ordered the Caseology coastline series slim transparent cover. Works great with the above screen protector. Like they were made for each other and it protects great. It's taken quite a few drops and at least twice has flown out of my cycling top flying down the road at 23 mph. Barely a scratch!!
MamomaN said:
i opened the link at amazon and i saw A LOT of angry people reviewing the Protector
Click to expand...
Click to collapse
Yes because they are bunch of noobs that do not know how to apply this tempered glass screen protector. Anyways it seems like with these curved screens almost all of the tempered glass screen protectors just have adhesives on the side and you stick it on.
I was like you fed up and almost just gave in to do the wet screen protectors but just the mere thought of having to spray the beautiful phone with the solution and squeegee out the excess AND not to mention that you have to wait like half a day for the thing to dry out before using it made me at least consider trying 1 more tempered glass screen protector which this one talked about having less real estate it covers to provide enough cushion to apply a case and sure it enough it worked for me. I ordered the 2 pack version which is through the link below. For some reason Amazon separated the product reviews so this one has more positive reviews but you are never going to satisfy everyone.
I guess I could post a pic to show what my phone looks like with the screen protector on and the case.
https://www.amazon.com/gp/product/B071XV2LPF/ref=ox_sc_sfl_title_2?ie=UTF8&psc=1&smid=A1GA7VZXJI5IFZ
Skinomi and IQ shield never fail me. Lifetime warranty and full skin protection for somé phones
Sent from my LEX727 using Tapatalk
There is no need to use screen protector in today's phones. I stopped in late 2015 and none of my phones got any scratches on screen (and I put them in my bag with my keys all the time). The gorilla glass 4/5 are super strong and scratch resistant.
I bought a couple from AliExpress dint work as well as needed the screen fully works but bringing the notification panel down was an issue but give the Whitestone dome protector i have a friend who uses it and says its brilliant though its pretty expensive but rather 50 bucks than getting a new screen my Opinion
Just got these in 2 days ago and it works great! They actually have the screen protector just the right width do that the case does not peel up the glass, also my old Spigen case doesn't peel it up either, just throwing that out there if you dont like the cases.
http://www.ebay.com/itm/Samsung-Gal...var=561958065030&_trksid=p2057872.m2749.l2649
My mother and I have had the S8 since release. We have never had an issue with breaking the screens until this phone! The Zagg one on release day absolutely stunk as the adhesive was only on the curved part of the protector leaving the whole screen non responsive to our touch. Since then we have been daring and been going without one. Within the last 3 months my mother dropped her phone twice. The phone was replaced at a $149 deductible the first time. I refuse to pay it again until I can find a screen protector that works!
Please help!
Full adhesive, curved edges, perfect glass cover.. Can be purchased from Home Depot or Amazon!
Samsung Glass Screen Protector - Ultra Thin Tempered Glass with Easy Applicator and Cleaning Kit - Smudge, Fingerprint, Scratch and Shatter Resistant - ProGlass by Tzumi
Doesn't make since to make another thread, but I'm looking for something that's similar. Preferably one that is case friendly, doesn't ruin touch sensitivity, and doesn't have a weird cutout for the sensors at the top. I bought the Pro Glass one in the above post, but it wasn't case friendly.
[email protected] said:
Full adhesive, curved edges, perfect glass cover.. Can be purchased from Home Depot or Amazon!
Click to expand...
Click to collapse
Links?
As far as I know, having tempered glass only won't help when the phone drops.
For myself, I watched several people try drop testing S8 using rhino shield bumper case (can search on YouTube). I too, have one, but since I don't like the glass back getting smeared with fingerprint, I go to otterbox defender (a hefty one), and finally to spigen tough armor (the one I currently use).
For record, I have dropped my phone twice (forgot whether using defender or rhinoshield), without any tempered glass, and the phone is still working without flaw.
GOBUKEE GALAXY S8 Full Glue Tempered Glass
This looks promising GOBUKEE GALAXY S8 Full Glue Tempered Glass
Thanks!
$30 for a screen protector does not look promising!
thevmax said:
$30 for a screen protector does not look promising!
Click to expand...
Click to collapse
Neither is wasting money on cheaper versions that just don't work. If this one actually prevents screen damage without compromising the user experience then it's a good investment.
I bought these.. pretty good in my opinion, for the price
Karlinski said:
I bought these.. pretty good in my opinion, for the price
Click to expand...
Click to collapse
What case are you using with your GOBUKEE?
https://www.amazon.com/gp/aw/d/B074SJV133/ref=ya_aw_od_pi?ie=UTF8&psc=1
I got these. There is about ~1mm gap between top and bottom edges clearance with spigen tough armor on. The sides of the glass are almost right on the edges of the case. I don't recommend using it without a case or with rhino bumper bc it doesn't go to the edges and feels weird bc of the extra gap. It does come with a tool that clips onto the phone to line it up perfect. I'm happy with it.
I'm using a Spigen case. I do have an S8 active, so the case is different, but Spigen makes great stuff
Incipio Plex Plus Shield Edge is awesome, had mine for a couple months and it's still attached lol
I purchased these: https://www.amazon.com/gp/aw/d/B078W2LZM6?psc=1&ref=yo_pop_mb_pd
It may be a PET protector but it does the job and is super thin and case friendly. Another aspect is that it's cheap! 3 for 8 bucks and was easy to install.
Anyone knows a tempered glass that fits with the Spigen Neo Hybrid ?
Knox316 said:
Anyone knows a tempered glass that fits with the Spigen Neo Hybrid ?
Click to expand...
Click to collapse
Whitestone dome...have it on my s8 with that spigen
Sent from my SM-G950F using Tapatalk
The best glass for S8 is Gobukee full adhesive glass. Can be found on Amazon. Quite a new brand but the product is awesome..I am enjoying it.
Knox316 said:
Anyone knows a tempered glass that fits with the Spigen Neo Hybrid ?
Click to expand...
Click to collapse
Spigen offers a tempered curved protector that fits. Mine cracked after 2 months, still usable. Experienced a few spots in the corners where touch responsiveness is decreased.
What is the best Glass Screen Protector for Galaxy S8
I've always admired how my friend’s phone looked so seamless and smooth, it always fooled me thinking that his screen protector came with the phone when he purchased it. To my surprise, he installed it himself. Now I’m not a bad friend, but this guy can get excruciatingly stupid at times. I thought if someone as dense as him had managed to somehow not mess up with wet installation, how hard can it be?
I got the Ounier screen protectors, a squeegee, a tiny piece of cloth, a manual, and a small bottle spray solution. I’m the old-fashioned type, I never even knew that “wet installation” is actually a thing if not for my buddy. All these items looked so weird to me. I’ll never understand how people come up with this stuff but if it works, then it's fine with me.
Is the included clear case tempered glass screen protector friendly, or does it lift it up from corners? Any recommendations for screen protector? And if that included one is no good, also recommendation for clear case is appreciated.
im using the MOFI full screen tempered glass screen protector with the factory case without issue.... just too bad the MOFi looks like a oild slick in the middle of the screen otherwise it would be perfect
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Am I not right in thinking this phone comes with a screen protector already on it.? Mine looks like it does, obv don't want to try and take it off in case it is one lol... Came with a clear case too
Cheap tempered glass + clear case (Huawei case)
I used the clear case which came with the phone as for tempered glass I used a cheap (£1.99) from eBay.
The tempered glass covers the screen almost perfect. It isn't edge to edge, but it is wide as the screen.
The glass hasn't got a good oleophobic coating, but is better than the plastic one and has adhesive on entire surface. (i would add a photo but I've got no clue how?
Hi all, is there any spigen neo hybrid alternative for Huawei P20 Pro?
Hi, any issues getting the tempered glass on with the Spigen case? Thanks
RubyRP62 said:
I bought a Spigen case which is, as usual, nice and protective.
For the tempered glass, i bought a Force Glass ($$$) which is really nice to touch without fingers trails, but finally it's ****. Like all the S8/S9 (not dome glass) it's only glued with the edges and not very well, so it'll become dirty fast . And if you look at it under a bright sun you don't see anything.
I don't recommend to buy this "way too expansive" Force glass! I regret it! 2$ glass will do a better job.
Click to expand...
Click to collapse
I've applied Zabra tempered glass (Amazon purchase) without any bubbles but after applying the Huawei clear case, edges came out, disabling my screen touch features.
Highly not recommended to buy this "Zabra full glue 9H tempered glass screen protector"
On of the best tempered glass for P20 PRO is Nillkin the hall series..
I have try Nillkin amazing H (3mm cover real screen leave 2mm at the edges case friendly) Nillkin amazing H+ (2,6mm cover real screen leave 2mm at the edges case friendly best clarity) & Nillkin CP-MAX 3D (3mm Full Cover edge to edge full adhesive full glue)
They are all fit perfect with excellent fit & clarity
No bubbles, no rainbow effect, no halo effect, no dot matrix, no fingerprints
I prefer CP-MAX 3D for full protection with original clear silicone case or ipaky case
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
those side adhesive screen protectors suck!!!
whitestone is loca based and because of that full adhesive and it will be released in a week or so on amazon. great feel to the proctector, just like the original screen, no 3d dot matrix, no problems with touch sensitivity, almost no fingerprints and if they are gone with one wipe and so on.
i will get it asap since it's doing fantastic on my note 8 for over 9 months now.
i got the spigen rugged armour and i love it. Feels great in your hands. its like velvety soft. Using this with the stock screen protector, which i feel is sufficient for me
i just wish spigen released the ultra hybrid clear case with a built in kickstand for this phone.
I've never used a protector on my previous phones but opted for the Spigen and think it's great. Had it in five days now, doesn't get too messy from fingerprints and only issue with haloing was my fault, had to take it off a couple times as I want happy with how I put it on. Used it in direct sunlight and was amazed, after one Samsung and two Sony's I can actually read my phone outside"
TheRedIndian said:
I have bought the Spigen tempered glass screen protector and Spigen Ultra Hybrid Crystal Clear case recently
Click to expand...
Click to collapse
I bought the Spigen Slim Armor case ( £15 ) and Spigen Tempered Glass ( about £8 ) and am very happy with both. I moved from Otterbox a few years ago when I couldn't see a decent case that I liked. I've had 4 Spigen cases for various phones so far and have never been let down to date
ESR products for me fits perfectly
It looks like there are not much good options for this phone (compared to my last one), I have ordered the spigen ultra hybrid (transparent) & tempered glass combo.
I'll post photos with the result
Do some regions not get an included case? I just bought this device yesterday in Canada and there was no case with it.
Spigen crystal clear case and Nillkin Amazing H+ for tempered screen. Trust me, this glass protector is the only one I have found to not retain fingerprints and to stick perfectly and evenly on the 20 pro. If you correctly align it with the edges of the screen, there will be no air pocket whatsoever. It's impressive.
Anybody know the brand of this screen protector and where I can get one? I'm most interested because, well, it's full screen and not just adhesive around the edge. But also the guy mentioned it works with the case I'm going to be using ( UAG ) .
https://www.youtube.com/watch?v=FymSOb_3vOs