Hi Evryone.
Because I didn't found CWM or TWRP Recovery or any root method for the galaxy J5 J5108 and the J7 J7108, I made a pre-rooted firmwares for those models.
This firmware base on the hong kong firmware which include the Google apps, this a full firmware exactly like the original, except the root.
After flash you will see the SuperSU app in the app drawer.
Also, this firmware contains the bootloader from the china firmware which doesn't have frp lock.
The root include the binary files in the system, and a pathed boot. (from Android 6.0 or samsung 5.1.1 pathing the boot is necessary for the root work properly)
Flashing this firmware will not wipe data automaticly. you should not lose anything.
This file will work on any firmware/baseband/csc. you can always flash it like a stock firmware.
J5 - base on - J5108ZHU1APD2.
Android version: 5.1.1
J7 - base on - J7108ZHU1APD1.
Android version: 5.1.1
Downloads
J5
http://www.mediafire.com/download/o8hfu81j3j4irjt/J5108ZHU1APD2_Rooted_by_avicohh.exe
J7
http://www.mediafire.com/download/z7bh4sdmzqer6nb/J7108ZHU1APD1_rooted_by_avicohh_v2.exe
Installation instructions
Before flashing check the CROM Service status in Download mode, if it locked you will need to unlock the bootloader first with the app attached.
Install samsung usb drivers from here.
Download the self extracting 7z file above and extract it (just double tap) to some folder, you should receive a tar.md5 file.
Open odin 3 (attached in the zip)
Put the tar.md5 file in AP.
Put the device in download mode. (vol down + home + power button, and then click on vol up)
Connect your phone to usb and wait for odin detect the device.
Click start.
After it finish choose reboot system now in recovery.
Enjoy.
If you want to thank me for this work, you can do this by donating.. :good:
Thanks a lot avicohh. This was simple and painless. I now have google services on my mainland China phone. And root too! And like you said - I did not loose anything.
well now i am stuck. I enabled my google account, installed and updated my apps through google play, shutdown and now I can't boot. The message in red on the top of the boot screen is:
"KERNEL IS NOT SEANDROID ENFORCING
Custom Binary blocked by FRP lock."
I also cannot reflash the same HK rooted firmware using Odin
apparently I should have enabled developer options then enabled OEM unlocking before rebooting. But I didn't know that so for now I am bricked
Also apparently, the fix for it is to reflash the original firmware using Odin. I am now downloading the firmware from http://updato.com/firmware-archive-select-model?record=1F170CA05E5611E6B055FA163EE8F90B but it is still another 2-3 hours to complete the download (yes, poor internet connection here.)... So I'll see how that goes...
OK, that didn't work. Now the message on the download mode screen says:
SW REV. Invalid type.
FRP is enabled, not allow download non FRP bootloader binary
Well..
I just recently had the same problem in another device.
I don't think the "Oem unlock" has nothing to do with this. the problem is that when you're adding Google account the frp (factroy reset protection) is automaticly enabled, and then it blocks the pathed boot.
The reason reflash the original firmware didn't work for you is because you tried to flash the china version, that doesn't have google service and also doesn't have frp in the bootloader. (apparently once frp is enabled this kind of operation is not allowed because you are actually trying to remove the frp lock by flashing bootloader..)
I think the solution will be to flash the original hong kong firmware with the frp bootloader and original boot. (or just the original boot)
http://updato.com/firmware-archive-select-model?record=5C13445B54D811E6B055FA163EE8F90B
Then, try to enable the "Oem unlock" option and finally flash the rooted firmware again.
maybe it will work, I'm not sure about it but I would like to know.
If this won't work, I'll try to combine the rooted hong kong firmware with the non-frp bootloader from the china firmware.
Thanks so much for replying avicohh
avicohh said:
Well..
The reason reflash the original firmware didn't work for you is because you tried to flash the china version, that doesn't have google service and also doesn't have frp in the bootloader. (apparently once frp is enabled this kind of operation is not allowed because you are actually trying to remove the frp lock by flashing bootloader..)
Click to expand...
Click to collapse
This makes sense. I was actually suspecting this and was considering trying the 6.01 HK version since that is the only one I could find: http://updato.com/firmware-archive-select-model?record=5C13445B54D811E6B055FA163EE8F90B
Now that you've posted a link to your original 5.1 HK firmware I'll try what you suggest. I'll wait to get home before I start the download.
But I still wonder if the 6.01 would work on my phone?
It's a mistake.
This link above is 5.1.1, not 6.0.1.
There is no 6.0.1 fro this model for now.
yes, I see, the website says its 6.01, but its actually 5.1.1. How do I know? BECAUSE IT WORKED!!! It took 7 hours to download but when I got up this morning it was done, I flashed and it worked!!!
I'm going to read up some more on this FRP business before flashing the rooted version again. My old phone (very old) had no such thing. I'd never heard of it till this unpleasant way of learning about it.
downloading
Same problem downloading the stock firmware from http://forum.xda-developers.com/gal...108-how-to-root-galaxy-j7-2016-model-t3426967
I hope this works....
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
Tukuvai said:
Same problem downloading the stock firmware from http://forum.xda-developers.com/gal...108-how-to-root-galaxy-j7-2016-model-t3426967
I hope this works....
Click to expand...
Click to collapse
I meant http://updato.com/firmware-archive-s...55FA163EE8F90B
Hi guys.
Thanks for your replies.
I've just checked it now on another device.
As it turn out after a several tests, this "custom binary blocked by frp lock" problem occurs only if the oem unlock option is disabled.
Here is what I did, step by step:
First, I enabled the oem unlock option and then I added Google account - nothing happened. frp lock in Download mode is still off and everything working fine.
I removed the google account, turned off the oem unlock option and finally added the google account again - frp lock in download mode immediately switch to on, and when I tried to restart, the device has stuck on the boot. (custom binary..)
I flashed stock firmware (from the link above), the device now bootup normally but the frp lock in download mode is still on. (I didn't remove the google account yet)
Final check - I enabled the oem unlock again, and the frp lock in download mode switch to off.
So..
I can safely say that all you need to do is just enable oem unlock in developer options, and then flash the rooted firmware.
Anyway, to be even more sure, I made a new firmware with the china bootloader, frp now is not even exist in download mode.
You can download the new firmware from here
http://www.mediafire.com/download/z7bh4sdmzqer6nb/J7108ZHU1APD1_rooted_by_avicohh_v2.exe
Good luck!
avicohh said:
Hi guys.
Thanks for your replies.
I've just checked it now on another device.
As it turn out after a several tests, this "custom binary blocked by frp lock" problem occurs only if the oem unlock option is disabled.
Here is what I did, step by step:
First, I enabled the oem unlock option and then I added Google account - nothing happened. frp lock in Download mode is still off and everything working fine.
I removed the google account, turned off the oem unlock option and finally added the google account again - frp lock in download mode immediately switch to on, and when I tried to restart, the device has stuck on the boot. (custom binary..)
I flashed stock firmware (from the link above), the device now bootup normally but the frp lock in download mode is still on. (I didn't remove the google account yet)
Final check - I enabled the oem unlock again, and the frp lock in download mode switch to off.
So..
I can safely say that all you need to do is just enable oem unlock in developer options, and then flash the rooted firmware.
Anyway, to be even more sure, I made a new firmware with the china bootloader, frp now is not even exist in download mode.
You can download the new firmware from here
http://www.mediafire.com/download/z7bh4sdmzqer6nb/J7108ZHU1APD1_rooted_by_avicohh_v2.exe
Good luck!
Click to expand...
Click to collapse
Hey, How do I enable OEM unlock when I can't even boot my device. it simply refuses to boot.
Hi
First flash the original HK firmware from here. the device should boot up normally.
http://updato.com/firmware-archive-select-model?record=5C13445B54D811E6B055FA163EE8F90B
Then, enable oem unlock.
Thanks for making the root version of mainland firmware. I'm going to stick with the HK version as I want to have google services. and thanks for testing the oem unlock
I informed myself some more about FRP and OEM unlock and I am now feel safe to use the rooted HK firmware. Except, I came across one note for which I want further clarification before proceeding. The note is from http://www.androidcentral.com/factory-reset-protection-what-you-need-know and it says:
"A couple notes need added here. This doesn't undo Samsung's (or anyone else's) version of Reactivation Lock. If you've enabled data reset protection through your Samsung account, you'll need to turn that off in your Security settings. You can find the switch under the "Find My Mobile" section."
So, I want to be sure I don't have this samsung Reactivation Lock enabled. and that I am in no danger of it auto-enabling. I believe I am safe but I would like to know if anyone has more clear information.
What I do know is before I flashed to HK ROM, when I went into download mode, there displayed a setting:
"REACTIVATION LOCK: OFF"
now, using the HK ROM, it is gone, but in that exact same location is the setting:
"FRP LOCK: OFF"
I think, that means the mainland version of the FRP lock (Samsung Reactivation Lock), is now replaced with the google FRP lock and as I don't have to worry about the samsung reactivation lock anymore. Is that so?
even so, as the article says, I look in "Settings" >> "Lock screen and security" >> "Find my mobile" >> log into Samsung Account when prompted, then it does not display the "Reactivation Lock" option that is shown in at least one guide that I found. I really think this is further proof I don't have to worry about Samsung Reactivation Lock. Can anyone confirm?
Yes I can confirm.
But pay attention that because of the FRP, is not possible to make a pre-rooted firmware for Android 6.0 and above or 5.1.1 Samsung devices, from firmware contains FRP protection like the HK one.
From those android versions (and above), a pre-rooted firmware (or any root method) must include a patched kernel.
Due to the FRP protection, once it turn on, it detect the custom kernel (boot) and not allow the device to boot. (custom binary blocked by FRP lock)
That's the reason I had to replace the HK bootloader which contain FRP protection, with the China bootloader which contain the Samsung reactivation lock. (instead of FRP, because china firmwares doesn't include any google services)
I don't know what the policy of the Samsung reactivation lock, about custom kernels.
And also I don't know if the Samsung reactivation lock turns on automaticly if you are adding Samsung account. (Like the FRP lock)
And one more thing, I beleive most people don't use Samsung account at all.
So after all this,
If it come to decision what to use, the FRP lock or the Samsung one (depends only in the bootloader), I'm pretty sure that in this case (custom boot), the best is to use the Samsung lock, and just dont add Samsung account, or add Samsung account if needed but turn off the Reactivation lock in the Find my mobile settings.
I hope it help you a bit.
Good luck.
btw, If you can check the Samsung lock after root and report here, it would be great.
avicohh said:
Anyway, to be even more sure, I made a new firmware with the china bootloader, frp now is not even exist in download mode.
You can download the new firmware from here
http://www.mediafire.com/download/z7bh4sdmzqer6nb/J7108ZHU1APD1_rooted_by_avicohh_v2.exe
Good luck!
Click to expand...
Click to collapse
Oh, at first I thought you meant you rooted the mainland firmware. Now, based on your later post, I believe what you did was to put the mainland bootloader in the rooted HK firmware. Is this the case? If so, that means I can still have google services, and root, and no possibility of FRP issues because its a mainland bootloader. OK, I will try tonight. The Samsung reactivation lock is off by default. Even adding a Samsung account does not turn it on, you have to go into "find my phone" to turn it on. So it should be safe. I will confirm tonight after I download your new firmware.
Yes, this is exactly what i did.
Thanks for testing the samsung account. so it is pretty safe.
yes, this new version with mainland bootloader is good. It seems almost impossible to lock.
Now when I go to download mode, there is no more "FRP LOCK: OFF". in its place is "REACTIVATION LOCK: OFF".
Just for fun I tested by going inter developer options and turned off OEM unlock - then I tried to reboot = success. Enter download mode = still "REACTIVATION LOCK: OFF". Of course I turned it back on again after the test.
and in settings, find my mobile, there is still not a setting for "REACTIVATION LOCK". I have seen an example on the web that this reactivation lock setting should be at the bottom of the options under find my mobile. So, actually now I cannot find any way to turn on the reactivation lock - this is good, its what we want.
Of course to even enter the "find my mobile" section I can do nothing at all (in fact it does not even show me what the options are) untill I give my samsung account credentials. Once I give credentials I can see the options but there is no option to turn on reactivation lock. There is just one thing, maybe, is that in "find my mobile", there a place that says: for more information go to findmymobile.samsung.com. When I go there I have 2 options:
-1) FIND - Find, Lock, Wipe my device
-2) PREPARE - Ready device for Find my Mobile
this "prepare" option I am afraid to try, I am afraid it may be the one to enable reactivation lock. Clearly it is not required to actually find my mobile because I just click the "Find" button and it it finds it for me. So, what would be the use of "prepare"?
At any rate, we know that just creating a samsung account does not activate the lock. I never had a Samsung account before. When I set up this new phone I never did enter developer mode to turn on oem unlock but i did create the samsung account. It was after that I flashed version 1 of avicohh's rooted firmware and when I went into download mode, it said REACTIVATION LOCK: OFF, so creating the Samsung account does not turn it on.
avicohh said:
Hi Evryone.
Because I didn't found CWM or TWRP Recovery or any root method for the galaxy J5 J5108 and the J7 J7108, I made a pre-rooted firmwares for those models.
This firmware base on the hong kong firmware which include the Google apps, this a full firmware exactly like the original, except the root.
After flash you will see the SuperSU app in the app drawer.
Also, this firmware contains the bootloader from the china firmware which doesn't have frp lock.
The root include the binary files in the system, and a pathed boot. (from Android 6.0 or samsung 5.1.1 pathing the boot is necessary for the root work properly)
Flashing this firmware will not wipe data automaticly. you should not lose anything.
This file will work on any firmware/baseband/csc. you can always flash it like a stock firmware.
J5 - base on - J5108ZHU1APD2.
Android version: 5.1.1
J7 - base on - J7108ZHU1APD1.
Android version: 5.1.1
Downloads
J5
http://www.mediafire.com/download/o8hfu81j3j4irjt/J5108ZHU1APD2_Rooted_by_avicohh.exe
J7
http://www.mediafire.com/download/z7bh4sdmzqer6nb/J7108ZHU1APD1_rooted_by_avicohh_v2.exe
Installation instructions
Before flashing check the CROM Service status in Download mode, if it locked you will need to unlock the bootloader first with the app attached.
Install samsung usb drivers from here.
Download the self extracting 7z file above and extract it (just double tap) to some folder, you should receive a tar.md5 file.
Open odin 3 (attached in the zip)
Put the tar.md5 file in AP.
Put the device in download mode. (vol down + home + power button, and then click on vol up)
Connect your phone to usb and wait for odin detect the device.
Click start.
After it finish choose reboot system now in recovery.
Enjoy.
If you want to thank me for this work, you can do this by donating.. :good:
Click to expand...
Click to collapse
sir, you are awesome!!
I'll try to install in my J5108. I will give to my daughter. Is there a form to unroot the phone? Thanks!
Yes.
Just install stock rom.
http://updato.com/firmware-archive-select-model?record=A097D215549D11E6B055FA163EE8F90B
Hello guys, i've recently got a Galaxy S6 Edge SM-G925I with Marshmallow 6.0.1 and i'm really pleased with its speed and battery!
I searched how to root it, but from the very first moment i got stuck because i can't find the "Allow OEM Unlock" option in Developer Settings. I have already made a factory reset but remained the same, so i decided to avoid flashing anything just to make sure i don't screw it up. I've looking for similar cases and i found out that if the OEM Unlock option doesn't appear, the phone may have an already unlocked bootloader. But if the phone comes from a carrier, it could be locked.
As i mentioned in the title, my S6 Edge comes with the firmware from our carrier Claro. I suspect this could be the cause.
Please can someone confirm that the firmware from this carrier indeed has a locked bootloader? Is there any way to check this by myself? how can i bypass the lock and root the device? Can i safely flash the official Nougat firmware with Odin even if the bootloader is locked?
I'm leaving below the details from "Software Info" and the Download Mode screen in case it helps.
Android version: 6.0.1 // Compilation number: MMB29K.G925IUBS3QD5 // Base Band: G925IDVU3EPL1
Odin Mode
Product Name: SM-G925I
Current binary: Samsung Official
System Status: Official
Reactivation Lock: OFF
Secure Download: Enabled
Knox Warranty Void: 0 (0x0000)
RP SWREV: B:3 K:2 S:2
Screenshots
Thanks a lot in advance!
alpha-ro said:
Hello guys, i've recently got a Galaxy S6 Edge SM-G925I with Marshmallow 6.0.1 and i'm really pleased with its speed and battery!
I searched how to root it, but from the very first moment i got stuck because i can't find the "Allow OEM Unlock" option in Developer Settings. I have already made a factory reset but remained the same, so i decided to avoid flashing anything just to make sure i don't screw it up. I've looking for similar cases and i found out that if the OEM Unlock option doesn't appear, the phone may have an already unlocked bootloader. But if the phone comes from a carrier, it could be locked.
As i mentioned in the title, my S6 Edge comes with the firmware from our carrier Claro. I suspect this could be the cause.
Please can someone confirm that the firmware from this carrier indeed has a locked bootloader? Is there any way to check this by myself? how can i bypass the lock and root the device? Can i safely flash the official Nougat firmware with Odin even if the bootloader is locked?
I'm leaving below the details from "Software Info" and the Download Mode screen in case it helps.
Android version: 6.0.1 // Compilation number: MMB29K.G925IUBS3QD5 // Base Band: G925IDVU3EPL1
Odin Mode
Product Name: SM-G925I
Current binary: Samsung Official
System Status: Official
Reactivation Lock: OFF
Secure Download: Enabled
Knox Warranty Void: 0 (0x0000)
RP SWREV: B:3 K:2 S:2
Screenshots
Thanks a lot in advance!
Click to expand...
Click to collapse
G925I and G925F have unlocked bootloader by default.
You can flash nougat firmware without issue and keeping knox intact. Beware if you root knox will be tripped permanently.
Good! i may install nougat and then look for the proper root method, but now i feel more confident, i'll let you know once i manage to do it, thanks callumbr1 !
alpha-ro said:
Good! i may install nougat and then look for the proper root method, but now i feel more confident, i'll let you know once i manage to do it, thanks callumbr1 !
Click to expand...
Click to collapse
No worries, and I suggest root with twrp and magisk :good:
Hello everyone,
My S6 Edge is FRP locked because of a hard reset via the standard recovery.
Now is my question, how can I get rid of the FRP lock?
I've already tries multiple things, like:
- Flash a custom recovery (Can't because of RL lock (Reactivation Lock))
- Install factory binary to try a new method (Can't because there's no binary for my binary security level: RP SWREV: B:6 K:2 S:2)
- Install a stock rom with USB debugging enabled (Doesn't work, because for some reason ADB commands do not work...)
Hope you can help me!
same problem here
batlleTOPField3 said:
Hello everyone,
My S6 Edge is FRP locked because of a hard reset via the standard recovery.
Now is my question, how can I get rid of the FRP lock?
I've already tries multiple things, like:
- Flash a custom recovery (Can't because of RL lock (Reactivation Lock))
- Install factory binary to try a new method (Can't because there's no binary for my binary security level: RP SWREV: B:6 K:2 S:2)
- Install a stock rom with USB debugging enabled (Doesn't work, because for some reason ADB commands do not work...)
Hope you can help me!
Click to expand...
Click to collapse
So you have access to the device? In other words, you can use the device (open apps, play videos etc.) and just want to disable FRP but it wont let you? Did I get that right?
CroGamer1 said:
So you have access to the device? In other words, you can use the device (open apps, play videos etc.) and just want to disable FRP but it wont let you? Did I get that right?
Click to expand...
Click to collapse
Thanks for your reply!
But no, I don't have access to ky device. Only the configuration screem which you get when your phone comes new out of the box or after a factory reset.
Within the configuration screen I can't go any further than login of the Samsung account. Because it won't let me login
I need a way to bypass this, otherwise I will not be able to use my phone anymore...
batlleTOPField3 said:
Thanks for your reply!
But no, I don't have access to ky device. Only the configuration screem which you get when your phone comes new out of the box or after a factory reset.
Within the configuration screen I can't go any further than login of the Samsung account. Because it won't let me login
I need a way to bypass this, otherwise I will not be able to use my phone anymore...
Click to expand...
Click to collapse
So you know your credentials but the phone refuses to accept it? If so, open Google on your PC and type in Samsung - Find my mobile. Log into your account, choose your S6 and select Unlock Reactivation lock. Make sure that the phone is connected to the Wi-Fi network.
If you forgot your Samsung credentials click reset password on the login screen (on your PC) and repeat the steps above.
Hope it helps
CroGamer1 said:
So you know your credentials but the phone refuses to accept it? If so, open Google on your PC and type in Samsung - Find my mobile. Log into your account, choose your S6 and select Unlock Reactivation lock. Make sure that the phone is connected to the Wi-Fi network.
If you forgot your Samsung credentials click reset password on the login screen (on your PC) and repeat the steps above.
Hope it helps
Click to expand...
Click to collapse
I'll try when I get home!
I'll come back to you, but thanks in advance!
You need to reset your Google password and then log in.
callumbr1 said:
You need to reset your Google password and then log in.
Click to expand...
Click to collapse
Why should he? The phone is asking for the Samsung account
CroGamer1 said:
Why should he? The phone is asking for the Samsung account
Click to expand...
Click to collapse
FRP lock is Google account....
callumbr1 said:
FRP lock is Google account....
Click to expand...
Click to collapse
I just checked your claims and I don't see an option to disable FRP on my S6 edge using Google's method. It can erase and lock the device but it doesn't have the power to disable FRP. On the other hand Samsung's find my phone site has the FRP disable button. I wish to point out again that the phone explicitly asked for the Samsung account. If it wanted Google's info it would have asked. I could be wrong but I'm just saying what I'm seeing.
CroGamer1 said:
I just checked your claims and I don't see an option to disable FRP on my S6 edge using Google's method. It can erase and lock the device but it doesn't have the power to disable FRP. On the other hand Samsung's find my phone site has the FRP disable button. I wish to point out again that the phone explicitly asked for the Samsung account. If it wanted Google's info it would have asked. I could be wrong but I'm just saying what I'm seeing.
Click to expand...
Click to collapse
Yeah I know it's asking for Samsung account. But FRP lock is down to google. Remove Google account = FRP lock disabled. FRP lock and reactivation lock are different. If he can't get passed Samsung account the very easiest way is to just reset Samsung account credentials.
callumbr1 said:
Yeah I know it's asking for Samsung account. But FRP lock is down to google. Remove Google account = FRP lock disabled. FRP lock and reactivation lock are different. If he can't get passed Samsung account the very easiest way is to just reset Samsung account credentials.
Click to expand...
Click to collapse
Aha, okay then, sorry for the misuse of words. But still in a nutshell FRP and Reactivation lock are the same thing. Both still block the circumvention of the stock ROM if it's enabled. I think that the author of this topic meant to say Reactivation lock tbh
callumbr1 said:
Yeah I know it's asking for Samsung account. But FRP lock is down to google. Remove Google account = FRP lock disabled. FRP lock and reactivation lock are different. If he can't get passed Samsung account the very easiest way is to just reset Samsung account credentials.
Click to expand...
Click to collapse
I've done that already a long time ago. But simply resetting my Samsung account password isn't going to cut it.
My phone has been reset via the standard Samsung recovery menu. After that the phone boots up like it's totally new.
So you have to go through the configuration menu for the phone.
At the part where I have to fill in my Samsung account credentials it fails to advance because of Samsung's FRP lock which I still haven't been able to bypass.
batlleTOPField3 said:
I've done that already a long time ago. But simply resetting my Samsung account password isn't going to cut it.
My phone has been reset via the standard Samsung recovery menu. After that the phone boots up like it's totally new.
So you have to go through the configuration menu for the phone.
At the part where I have to fill in my Samsung account credentials it fails to advance because of Samsung's FRP lock which I still haven't been able to bypass.
Click to expand...
Click to collapse
Did you try the method I suggested on the previous page?
batlleTOPField3 said:
I've done that already a long time ago. But simply resetting my Samsung account password isn't going to cut it.
My phone has been reset via the standard Samsung recovery menu. After that the phone boots up like it's totally new.
So you have to go through the configuration menu for the phone.
At the part where I have to fill in my Samsung account credentials it fails to advance because of Samsung's FRP lock which I still haven't been able to bypass.
Click to expand...
Click to collapse
But if you are entering the correct details then it should pass the reactivation lock. So long as you use the same Samsung account you had logged in before you reset. So if you reset the credentials for that account you should be able to log in and pass the lock after.
CroGamer1 said:
Did you try the method I suggested on the previous page?
Click to expand...
Click to collapse
Not yet, within one hour I'll be home and the results for you.
callumbr1 said:
But if you are entering the correct details then it should pass the reactivation lock. So long as you use the same Samsung account you had logged in before you reset. So if you reset the credentials for that account you should be able to log in and pass the lock after.
Click to expand...
Click to collapse
Never heard that this wasn't possible. But I tried every possible combination.
batlleTOPField3 said:
Not yet, within one hour I'll be home and the results for you.
Click to expand...
Click to collapse
Ok. Keep me posted
CroGamer1 said:
Ok. Keep me posted
Click to expand...
Click to collapse
I will do so sir!
batlleTOPField3 said:
Never heard that this wasn't possible. But I tried every possible combination.
Click to expand...
Click to collapse
You can always try combination firmware.