Hi all,
I'm quite worried. Two days ago my amazfit suddenly switched off. I had more than 50% battery.
Since then I can't swhitch on, even holding the button. If I plug it, nothing on the screen. It just get hot. If i connect it to the pc it seems usb can reconigse sth has been connected, but it can recognize it...
I tried to clean the connections but nothing works.
Any idea? I'm now on Pacefied 1.2.14.
Many thanks in advance,
Same here
This morning (31st May 2017), my Amazfit was also suddenly switched off, and at the time i had around 50% battery, tho. I can't switch on my amazfit anymore, by push and hold the power button or even charge it by using its docking.
I found ur thread here and see no one reply urs. Well, if u have already the solution, please let me know, yes.
Thanks in advance.
i am Ancha, and i am in Jakarta, Indonesia, btw.
Related
Dear friends,
I have solved the problem myself but I want to share the problem I faced to you, so as to contribute a bit of knowledge.
Precondition: I always use a magnetic stand to charge up my z2.
What happened: Last night I was in my grandma's house and I forget to bring my magnetic stand so I used the standard usb charging. That night, a power outage occur. Total blackout. I didn't notice because I was sleeping.
The next day when I unplug the phone, I noticed two things: the battery was at 47%, almost the same as the previous night, which is understandable given the blackout occurred. Secondly, all hardware buttons (the power button, the volume adjuster, and the camera button, as well as the magnetic pins) all fail to work. I was only able to open my phone because I enabled the double-tap-to-awake thing. The usb port also didn;t work, i cannot connect to a pc, and neither can i charge up.
Solution, I pulled out and re-inserted the micro-SIM card while awake, this automatically rebooted the phone. After that, it all worked.
Thanks for reading.
The watch cannot turn on anymore after i forgot to charge it over night.
I try to clean a contact and tried to connect to computer or charger. No any responding on watch.
how to turn it on or reset a watch?
You should put the watches on your charger for 1 day...
jan.stanicek said:
You should put the watches on your charger for 1 day...
Click to expand...
Click to collapse
Thx, i will try to night and let see it after 24 hours charging ..:good::fingers-crossed:
For now, it still dead. Can't turn it on but the screen pretty warm.
I think I had that happened after my five days of use. It didn't turn on even on the charger for few hours. What I did was holding the power button for three or four seconds, and let the watch turn on the boot screen, and then right away put it to the charger. Then you should see the battery charging status image on the watch.
jcyaoo said:
I think I had that happened after my five days of use. It didn't turn on even on the charger for few hours. What I did was holding the power button for three or four seconds, and let the watch turn on the boot screen, and then right away put it to the charger. Then you should see the battery charging status image on the watch.
Click to expand...
Click to collapse
In my case i didn't see any boot screen when i hold the power button. you have any idea to turn it on?
Try plug your charger directly to a power USB switch. and clean the pins on the charger and on the watch.
jcyaoo said:
Try plug your charger directly to a power USB switch. and clean the pins on the charger and on the watch.
Click to expand...
Click to collapse
Yes, i have does like that, no anything on screen....:crying:
I will drain my battery over tonight see if I can charge it. Will let u know
jcyaoo said:
I will drain my battery over tonight see if I can charge it. Will let u know
Click to expand...
Click to collapse
Oh, really. be care ful bro, i so concern your watch will dead as my watch.
My battery is completely 0%. My watch is not turned on even on the charger. I pressed the watch down to the charger and made sure it was touching the pins, and then I pressed the power button the watch (while it is on the charger) for 2 or 3 second; the watch is turned on with battery charging status image. Hope that helps. BTW I use a StartTech USB switch for charging my phone and watches. The switch is not plugging to a PC or laptop; it is only for charging my devices.
After I "fried" some bluetooth headsets with wallchargers ( probably powersurge or similar )
I never ever use them for "small" devices like headphones or the watch.
I always charge with a powerbank.
Since then I didn't have any problems
Try to twist the charging ring
After I twist the charging ring couterclockwise/clockwise, the power was increase. So you should try twist the ring until it got the right position and precise contact. Hope this solution helps yours.
I had this exact same problem with my watch after about 8 days, i had charged it multiple times before but one morning i noticed my watch completely off and thought the battery must of drained completely. I went to plug it in and nothing happened it wont charge (even leaving it on the charger for 24+ hours) . Ive tried everything and it just wont turn on or charge.
OP im afriad yours sounds like same issue, i raised a dispute on Aliexpress and got a complete refund. I have just recieved another one so im hoping i dont have the same issue again.
I still have the old broken one so was tempted to pull it apart and see if i can see anything but tbh i wouldnt know where to start so have not bothered.
Try washing charger and watch contact point
mars_man said:
The watch cannot turn on anymore after i forgot to charge it over night.
I try to clean a contact and tried to connect to computer or charger. No any responding on watch.
how to turn it on or reset a watch?
Click to expand...
Click to collapse
Hey folks, facing the same issue for my amazfit gts 2 watch. The watch is switched off and charging icon doesn't display on screen. I have been charging it since last 15 hours but nothing is happened. Please help me out on this issue.
have some issue with my amazfit gtr 47. have tried all, but still not charging
Hi guys
I think I might have fried my Pace. As I can read in the many threads on the forum a lot of you have seen problems with the Pace not turning on after recharge. On a visit to my family I needed to recharge my watch and I used the cradle with a wall plug power supply. Upon charging I did notice the screen was flickering a bit, but I had to leave the house. When I got back a littel later, the screen was black and the watch would not turn on. I havent been able to turn it on since. Using the USB the pc does not register anny devices nor does ADB or fastboot.
Is the watch dead? or is there something to do?
Space2001 said:
Hi guys
I think I might have fried my Pace. As I can read in the many threads on the forum a lot of you have seen problems with the Pace not turning on after recharge. On a visit to my family I needed to recharge my watch and I used the cradle with a wall plug power supply. Upon charging I did notice the screen was flickering a bit, but I had to leave the house. When I got back a littel later, the screen was black and the watch would not turn on. I havent been able to turn it on since. Using the USB the pc does not register anny devices nor does ADB or fastboot.
Is the watch dead? or is there something to do?
Click to expand...
Click to collapse
Did you try cleaning charging pins with a toothbrush or a toothpick? I had the same problem as you and I solve it with this method.
Hope it works to you, regards.
Thanks arceoxis
After reading all the threads on the subject it was the first thing I did, but unfortunately unsuccesfull.
regards
My battery was about 5% and I tried to recharge it. I put the watch on the recharger but nothing happened. No indication it's charging. Something more - the battery dropped to 2% within a minute. I tried with another USB cable but there's no change.
I updated the watch a week ago to the last available version.
Can you help me, please!
I tried to restart it, but unfortunately while it was starting again, the battery drained and the watch turned off.
This is what happens when it's plugged in the charger and I try to turn it on: the screen lights up and then turns off.
Link to the video.
rimorbod said:
I tried to restart it, but unfortunately while it was starting again, the battery drained and the watch turned off.
This is what happens when it's plugged in the charger and I try to turn it on: the screen lights up and then turns off.
Link to the video.
Click to expand...
Click to collapse
Hi, did you try to clean the electrical contacts ? How do I properly care and clean my Pace device?
Yes, I did. No effect
rimorbod said:
Yes, I did. No effect
Click to expand...
Click to collapse
Check that it's the watch who not working anymore. charging-amazfit-pace-cradle-dock-t3728206
Most probably it's not related to the update... Does the computer recognizes the watch when it's connected to one of its USB ports?
Keep it connected to the computer after making sure the metallic pins are clean and the USB cable is good, then press and hold the button for about 10s. After you release it, the watch should be off and you should see only the battery charging indicator when you press the button briefly again. Leave it this way for 30-45 min and try to press the button briefly to see if it has charged, sometimes when battery goes to zero it takes some time to get charge again (it's bad for the battery when it dies completely by the way). If it doesn't respond, probably it's dead, maybe water damage?
Problem solved. I left the watch connected to the cable with no visible sign of charging. After an hour maybe I pressed the button again and this time it turned on succesfully!
I don't know why it happened but I'm happy it works again.
Thanks for the answers!
I observe a recurring problem with charging. Last few attempts I must plug and unplug the watch to the charger more than 10 times until it starts to charge. I tried turning the watch off and on, but it doesn't help. It's so annoying. Anyone else with the problem?
First of all, sorry if this isn't the right place to post this thread.
Last night i was playing TFT on my Xiaomi Mi 10 as it shut itself down without any warning.
I'm sure i had more than 20% battery left.
This device is about 1 month old, and it crashed one time before, but i could just reboot it with the power button.
This time though, no reaction.
I tried every possible combination of Volume Up/Down and Power button presses, nothing. No vibration, nothing on the screen, just plain nothing.
It literally bricked itself. I did not root it or anything similar, I just used it normally.
Any ideas on what caused this, and more importantly how to fix this? I can't believe this.
PO5T MORTEM said:
First of all, sorry if this isn't the right place to post this thread.
Last night i was playing TFT on my Xiaomi Mi 10 as it shut itself down without any warning.
I'm sure i had more than 20% battery left.
This device is about 1 month old, and it crashed one time before, but i could just reboot it with the power button.
This time though, no reaction.
I tried every possible combination of Volume Up/Down and Power button presses, nothing. No vibration, nothing on the screen, just plain nothing.
It literally bricked itself. I did not root it or anything similar, I just used it normally.
Any ideas on what caused this, and more importantly how to fix this? I can't believe this.
Click to expand...
Click to collapse
I guess, that your battery is totally empty. Put on charger and leave on it few hours long.
krepsz said:
I guess, that your battery is totally empty. Put on charger and leave on it few hours long.
Click to expand...
Click to collapse
I charged it 4 hours in the night and right now since 3 hours
Call service. Sorry. If it doesn't boot into fastboot (vol-&power) things are bad...
Try plugging in your phone to a computer. I had a similar thing happen to another phone a little while ago when out of the blue it just died. I tried charging it, wireless charging it, trying power buttons etc but it instantly fixed itself when I plugged in the phone to my computer via USB. Let us know how it went.
PO5T MORTEM said:
I charged it 4 hours in the night and right now since 3 hours
Click to expand...
Click to collapse
Try different cable or check if the cable you use is working. Then press both volume up, down, and power button for at least five minutes. It might reset the phone. It happened to me once time not on the mi 10 but my rog phone 2 and I press that 3 buttons combination and the phone booted up again. I know the mi 10 might not work the same way as the rog phone 2 but you have nothing to lose to try it.
Yeah I tried using another cable, although I know this cable works (old phone). I also tried charging it via my PC, I even tried to connect to it via ADB, it didn't show up in the device list after installing the drivers.
Pretty sure I'm going to give it to service, I still got warranty and I even have insurance for it.
Because of that I don't want to open it to get the battery out and back in, although I'd really really like to know what caused this. I literally played a game and zap it goes black never to be seen again... I hope the service finds the cause and tells me.
Anyway, thank you really much for the suggestions and the help. Incase I get to know what caused this I will write it here as long as I remember to. Until then Cheers Lads.
Same here. My step-daughter purchased this phone and received it Tuesday morning. Now it won;t respond to anything.
I was handed the phone with "pcsuite.mi.com" on the screen but upon connecting to my laptop the screen went black and now won't respond to anything at all. No Recovery mode, no fastboot mode, no vibrations, nothing.
From reading reports online from other users, it seems like Xiamoi really "dropped the ball"/"shat the bed" with this model
edit2add (just seconds after posting)
I've also performed "lsusb" to see if the device is alive and there's nothing there either