Unable to boot into Recovery!! - Moto E Q&A, Help & Troubleshooting

Currently on a Mokee Build 161005, trying to update to the latest Mokee Build after a looong time..
The phone doesn't get into recovery at all, keeps on rebooting back to the OS..!!
Tried to reboot to recovery from inbuilt reboot menu, from fastboot.. nothing seem to work.. should i flash the recovery again..?
i can't seem to figure out what the problem is, any help is appreciated..

Small_town_boy said:
Currently on a Mokee Build 161005, trying to update to the latest Mokee Build after a looong time..
The phone doesn't get into recovery at all, keeps on rebooting back to the OS..!!
Tried to reboot to recovery from inbuilt reboot menu, from fastboot.. nothing seem to work.. should i flash the recovery again..?
i can't seem to figure out what the problem is, any help is appreciated..
Click to expand...
Click to collapse
Method 1
1. Install flashify from Google play store
2. Download latest twrp 3.x.x.img from official site
3. Open flashify and flash twrp recovery
Method 2
1. Reboot to fastboot/bootloader
2. Flash latest twrp using command
"Fastboot flash recovery twrp-3.x.x.img"

Related

My HTC ONE MAX Blrick, Please help :(

Today, i try to install cm 12.1 rom, so i do something like:
1. Unlock bootloader
2. Install Recovery TWRP v2.6.3.0
3. After install recovery, i boot into recovery and install rom CM 12.1 but i met these error:
E:Error executing updater binary in zip '/sdcard/Trick
Error flashing zip
4. Now i reboot, it say that:
No OS Installed
5. Now when i reboot , the screen stop at logo HTC
6. I try to install Google Play Edition Max,
But i face the same error
What can i do now ? Somebody helppppppppppppppp
try with another twrp, use flyhalf's twrp
itsmelutfor said:
try with another twrp, use flyhalf's twrp
Click to expand...
Click to collapse
I was, then i can install recovery twrp 2.7, it work fine,
But rom cm12.1 always failed, i install google edition, it run ok, but when it start, reboot happens
shadowsoul1986 said:
I was, then i can install recovery twrp 2.7, it work fine,
But rom cm12.1 always failed, i install google edition, it run ok, but when it start, reboot happens
Click to expand...
Click to collapse
Firstly, find your correct variant of TWRP HERE. Currently TWRP 2.8.6.0.Download and flash recovery.
Then, flash ROM.

Couldn't get root access error on miui 8 china developer beta 6.63

getting the following error 'Couldn't get root access-root rom isn't ready,please wait a moment', when trying to use the allow root access tab in security>permissions>allow root access . Is this normal for everyone? Is there another alternate way to enable root?
Yes, you need twrp recovery and BETA-SuperSU-v2.71-20160331103524.zip
If you don't want to flash the custom recovery permanently you can use:
fastboot boot recovery.img
And the twrp recovery will appear. After installing of the zip file and reboot, the stock recovery will take its place.
http://download.chainfire.eu/supersu-beta
This version is 2.74. I can't find 2.71, but it may do the job
tried it, after flashing the zip ,the phone got struck in the mi icon during boot. had to flash my backup.
jipkai123 said:
tried it, after flashing the zip ,the phone got struck in the mi icon during boot. had to flash my backup.
Click to expand...
Click to collapse
With 2.71 there is no problem with this.
Obviously not every version works with every phone.
For example mi 4 is rootable only with 2.65
hmm everytime i try to enter twrp, even if i dont do anything and reboot it will boot struck at mi logo......maybe the dev rom beta just dont work well with twrp.....
Check to see if the bootloader is locked again.
Code:
fastboot oem devices-info

[CM13 post-MM] Flashing in TWRP auto-reboots phone into recovery - help!

I was running the 8/3 update of Cyanogenmod 13 just fine on my L24. I downloaded the 8/13 nightly from the CM website and tried to flash it, but for some reason it returned error 7, which shouldn't happen because I already updated to EMUI4/MM firmware two weeks ago (as evidenced by me running the 8/3 version with no problems). However, when I then tried to boot back into system, the phone instead booted back into TWRP. Trying to boot into system in any way (from TWRP menu, through bootloader --> fastboot reboot, et cetera) just reboots the phone right into TWRP again. -_-
Now, I can access only TWRP and bootloader, but whenever I try to flash a .zip in TWRP it immediately reboots back into TWRP. I've tried reflashing TWRP (newest version and older versions), flashing the Cyanogenmod recovery for kiwi, factory resetting, and even reflashing the stock recovery and trying to return to stock EMUI. None of these have worked. (And yes, of course I've tried clearing cache/dalvik.)
At this point I'm just looking to actually boot into system...If anyone has any idea how I might be able to fix this, it would be great.
EDIT: to clarify, when I try to flash the ROM in TWRP, I get the following:
updating partition details
full selinux support is present
MTP enabled
and then an immediate reboot. This is very fast - I had to take a video of it and then freeze the frame to see what the message was.
Boot in fastboot and install your crap? Turn phone off connect to your PC hold Power and volume down until it boots.
Thanks for responding!
Could you explain what you mean? I can easily get into fastboot, but I'm not sure what I should be installing. Trying to install the ROM gives me the android-info.txt/android-product.txt missing error, which makes sense because it's not a fastboot ROM. What file should I be installing through fastboot?
radiobacter said:
Thanks for responding!
Could you explain what you mean? I can easily get into fastboot, but I'm not sure what I should be installing. Trying to install the ROM gives me the android-info.txt/android-product.txt missing error, which makes sense because it's not a fastboot ROM. What file should I be installing through fastboot?
Click to expand...
Click to collapse
fastboot flash recovery twrp.img
reboot with power + volume up and down
from TWRP
Install / yourRom.zip
Install / gapps.zip (if needed for cm13 based roms)
reboot / system
enjoy
clsA said:
fastboot flash recovery twrp.img
reboot with power + volume up and down
from TWRP
Install / yourRom.zip
Install / gapps.zip (if needed for cm13 based roms)
reboot / system
enjoy
Click to expand...
Click to collapse
Again, the issue is that I can't install any ROM through TWRP, because trying to instantly reboots the phone and brings me back into TWRP. I've tried reflashing TWRP, but it doesn't do anything.
Update: I fixed it! For some reason TWRP was recognizing my SD card up until I started flashing. I just put the ROM in my internal storage instead of the SD card, and then the ROM was flashed with no problems. Thanks to those who tried to help me out!
radiobacter said:
Update: I fixed it! For some reason TWRP was recognizing my SD card up until I started flashing. I just put the ROM in my internal storage instead of the SD card, and then the ROM was flashed with no problems. Thanks to those who tried to help me out!
Click to expand...
Click to collapse
The phone is known to be finicky about sd cards. Try formatting it with TWRP
Sent from my SM-N920T using Tapatalk

Removed OS through TWRP wipe & cant find a ROM to intall through twrp without errors.

Removed OS through TWRP wipe & cant find a ROM to intall through twrp without errors.
Cant get anything to work. Ive tried so many stock firmwares. I try installing .zips through TWRP. Every ROM has some kind of error. Can anyone help with this. Its a Moto E XT1526 Sprint US.
bkhobbs32 said:
Cant get anything to work. Ive tried so many stock firmwares. I try installing .zips through TWRP. Every ROM has some kind of error. Can anyone help with this. Its a Moto E XT1526 Sprint US.
Click to expand...
Click to collapse
Follow step by step
1. Flash stock lollipop using fastboot
2. Flash twrp using fastboot
3. Reboot twrp recovery
4. Copy stock boot.IMG & stock recovery.IMG
5. Flash stock boot.IMG & stock recovery.IMG in twrp recovery
6. Reboot bootloader
7. Now press volume up to normal boot
Rajendran Rasa said:
Follow step by step
1. Flash stock lollipop using fastboot
2. Flash twrp using fastboot
3. Reboot twrp recovery
4. Copy stock boot.IMG & stock recovery.IMG
5. Flash stock boot.IMG & stock recovery.IMG in twrp recovery
6. Reboot bootloader
7. Now press volume up to normal boot
Click to expand...
Click to collapse
I'll definitely try these steps. One of the biggest issues im having is finding the stock Lollipop. Ive tried all the stock firmware at firmware.center. Used twrp to instal from .zip. Where can i find the stock.img? I searched a little today with no luck.
bkhobbs32 said:
I'll definitely try these steps. One of the biggest issues im having is finding the stock Lollipop. Ive tried all the stock firmware at firmware.center. Used twrp to instal from .zip. Where can i find the stock.img? I searched a little today with no luck.
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=745425885120732957
Thanks for that. I actually found one that worked surprisingly last night. Its not the 5.1.1 but im happy it installed without errors.

Can somebody help me please!

So hey! I successfully booted into the TWRP and used it to flash the DISABLEFORCEENCRYPTION file, right after. I decided to reboot to recovery (Cause I think that would be great just after you flash something in TWRP) but then after it finishes showing the pocophone booting screen rather than showing TWRP recovery. It showed the stock MIUI recovery! someone please help! I just finished flashing magisk and a custom rom by using the method of: Everytime I need to flash something using TWRP I would just open adb and fastboot boot recovery it again so that I could use the TWRP!
Thank you in advance!
GGerniWhite said:
So hey! I successfully booted into the TWRP and used it to flash the DISABLEFORCEENCRYPTION file, right after. I decided to reboot to recovery (Cause I think that would be great just after you flash something in TWRP) but then after it finishes showing the pocophone booting screen rather than showing TWRP recovery. It showed the stock MIUI recovery! someone please help! I just finished flashing magisk and a custom rom by using the method of: Everytime I need to flash something using TWRP I would just open adb and fastboot boot recovery it again so that I could use the TWRP!
Thank you in advance!
Click to expand...
Click to collapse
I decided to fix this problem after I flashed a rom cause I think I would run into future problems involving magisk and it's use of the TWRP recovery.
GGerniWhite said:
I decided to fix this problem after I flashed a rom cause I think I would run into future problems involving magisk and it's use of the TWRP recovery.
Click to expand...
Click to collapse
If you already have the ROM installed, use adb to flash TWRP and without booting flash Magisk and then boot to system. If you are on stock ROM, follow THIS.
For entering into TWRP, use the key combination of volume up + power buttons.
You can use the encryption compatible TWRP (search for it) instead of the official one.

Categories

Resources