I had my Oneplus One running Lineage OS and TWRP Recovery. I tried installing Oxygen OS and the device seemed to work but then the screen became all black.
I restarted the device and its been stuck in Bootloop for over an hour.
I've tried rebooting it in recovery mode and fastboot but all that does is restarts the device.
I've also tried using adb but it doesnt recognize the device, I think I have all the drivers installed. When I plug the device to the PC it sounds as when you connect something, but its recognized as Android Device. There is nothing on Computer, no storage no nothing.
The device isn't rooted, but the bootloader was unlocked, as I had to flash TWRP to install Lineage OS.
I need some hElp plz
Related
my device is always booting to fastboot and shows me only a blank screen
i was running android 2.3
i tried to install clockworkmod recovery and i lost my all recovery
then i tried to install twrp recovery trough adb and after that my device went to fastboot and now my device is always at fastboot
i can pull the battery out because its like that like iphone
fastboot commands are working and my android is identified by pc
can you please help me to get my device back to working condition
thanks
Hi,
I have tried Sailfish OS, it shows promise but I cannot use as my daily driver.
I have re-flashed stock ROM successfully using EMMA, flashtool detects my phone but fastboot.exe does not detect it. adb.exe works when phone is loaded. The phone has been given debug permissions for my PC, I have tried reinstalling drivers. Do I need to completely uninstall and reinstall?
If I can't get fastboot working, I can't flash TWRP recovery and install a custom ROM!
Any ideas?
chutch002 said:
Hi,
I have tried Sailfish OS, it shows promise but I cannot use as my daily driver.
I have re-flashed stock ROM successfully using EMMA, flashtool detects my phone but fastboot.exe does not detect it. adb.exe works when phone is loaded. The phone has been given debug permissions for my PC, I have tried reinstalling drivers. Do I need to completely uninstall and reinstall?
If I can't get fastboot working, I can't flash TWRP recovery and install a custom ROM!
Any ideas?
Click to expand...
Click to collapse
Turns out this was a mistake on my part. Every guidance I saw referred to fastboot as being plug cable in + vol down. Using adb I was able to reboot into fastboot proper (power and vol up) and flash TWRP recovery.
Hello all,
I am stuck in this problem. Would appreciate any help.
Working in LINUX ubuntu 18.
Got a MI pad 1 with locked bootloader.
flashed TWRP recovery using fastboot. Booted into TWRP successfully.
Flashed the files from this
https://www.techeia.com/2018/10/best-custom-rom-for-mi-pad-1-2018.html
Everything flashed successfully.
Rebooted only to be stuck into MI logo screen. Bootloop probably because of locked bootloader.
Hence, I decided to wipe the bootloader itself
got the hint from here https://forum.xda-developers.com/mi-pad/how-to/fix-fastboot-bootloop-fix-xiaomi-mi-pad-t4008653
but I didn,t wiped recovery. but erased everything else. Then powered off to boot into previously installed TWRP recovery.
From there, I am trying to boot into fastboot or TWRP but the screen is showing blank. I am using the key pattern for fastboot or recovery and trying to detect the device into any mode through ubuntu terminal using
sudo fastboot devices and
adb devices
but its not detecting the device there also. USB debugging was enabled already.
Any clues for how can I boot into fastboot or TWRP from this.
Regards
Hiteshkartik
@hiteshkartik
A device with erased boot-loader never can work: you simly get a black screen. You no longer can communicate with it - neither via ADB nor via Fastboot.
Can I have a way around ?? I mean installing bootloader or somehow booting into fastboot or TWRP directly with any toolkit or terminal.
Ok so my Xiaomi Mi 8 Lite was (hard??)bricked because I flashed something I shouldn't have so now I can still access recovery mode TWRP but fastboot does not work at all. I've tried flashing lineage but when I boot it back up it just brings me back to TWRP after rebooting again.
By fastboot not working I mean that once I connect the device to a computer, the phone automatically quits fastboot mode. ADB can't even seem to find it in the devices list.
What should I do? Is my phone dead forever?
Thank you!!!
I tried flashing PixelBlaster on my realme 3 pro with no extra reseach (my fault) using TWRP. After flashing, i tried to reboot but it bootloops on realme logo (android). Fast boot is working, unlocked bootloader but turned off USB Debugging i guess because it does not show in adb. Tried other phone and turned on USB debugging and the device is listed. So now I have a realme 3 pro with NO RECOVERY, NO ROM, UNLOCKED BOOTLOADER, USB DEBUGGING OFF. When trying to boot to recovery it boots back to fastboot. When trying to boot normally, shows realme android logo then restarts.
quasar28 said:
I tried flashing PixelBlaster on my realme 3 pro with no extra reseach (my fault) using TWRP. After flashing, i tried to reboot but it bootloops on realme logo (android). Fast boot is working, unlocked bootloader but turned off USB Debugging i guess because it does not show in adb. Tried other phone and turned on USB debugging and the device is listed. So now I have a realme 3 pro with NO RECOVERY, NO ROM, UNLOCKED BOOTLOADER, USB DEBUGGING OFF. When trying to boot to recovery it boots back to fastboot. When trying to boot normally, shows realme android logo then restarts.
Click to expand...
Click to collapse
Also tried flashing twrp using adb but device not showing when used command ./adb devices in powershell