Guys, I really need your help!
I was planning to Install a custom ROM on my s6 edge because in was network locked in Japan.
Everything went smoothly. I rooted it using CF auto root international and it worked fine but after installing TWRP using the Odin, it's stuck there.
Everytime it boots up, it goes to TWRP and the problem about dis is that the TWRP interface can't be touched. Yes, it's stuck on the "swipe to allow modifications".
Please guys. I really need your help.
Did you choose the right TWRP for your model ? No need to root to install TWRP . Did you try to flash TWRP again or start over by flashing your firmware and TWRP again ?
Maybe you didn't flash the right twrp image for s6 edge.. try to flash the right image . If nothing changed then you have to flash the entire Rom from the begin..
Related
Hello,
I have been trying to flash TWRP to my SM-G925F and whenever I boot it says: "Recovery is not SEAndroid enforcing." (If this happens I just flash the stock recovery back and it works)
Is there a way to turn off "SEAndroid" or am I flashing the wrong version of TWRP onto my phone?
Please reply quickly because I would really like TWRP!
NH-Gaming said:
Hello,
I have been trying to flash TWRP to my SM-G925F and whenever I boot it says: "Recovery is not SEAndroid enforcing." (If this happens I just flash the stock recovery back and it works)
Is there a way to turn off "SEAndroid" or am I flashing the wrong version of TWRP onto my phone?
Please reply quickly because I would really like TWRP!
Click to expand...
Click to collapse
As far as I remember, flashing a custom recovery gives you that message. It's been like that for years which points me to the fact you're either new to Samsung or new to flashing a custom recovery on a Samsung
NH-Gaming said:
Hello,
I have been trying to flash TWRP to my SM-G925F and whenever I boot it says: "Recovery is not SEAndroid enforcing." (If this happens I just flash the stock recovery back and it works)
Is there a way to turn off "SEAndroid" or am I flashing the wrong version of TWRP onto my phone?
Please reply quickly because I would really like TWRP!
Click to expand...
Click to collapse
normal..which version you tried..
here is the guide
http://forum.xda-developers.com/showthread.php?t=3144866
Hello, I am using the 2.8.7.1-zeroflte TWRP recovery for the normal S6 not the S6 edge, would that be the problem?
not if it work..that sentence is normal..as it's because of the system write protection / security from 5.1.1 you have to live with that
It's not as intrusive as In past devices eg note series that I have rooted. And it sure doesn't effect functionality. You'll be looking more at the home screen than a reboot screen (unless your a dev lol )
I am having the issue with my phone.... I rooted phone with a 5.0.1 recovery on 5.1.1 rom. Now its stuck in a loop at SAMSUNG Galaxy S6 Edge
Logo. With Recovery is not SEANDROID ENFORCING. Any one please help.
having the same problem! trying to install twrp 2.8.7.1 on my s6 flat g920I, with 5.1.1 stock! installing through odin, when i enter twrp get this message, and after reboot im stucked on a loop
CellularGeek said:
I am having the issue with my phone.... I rooted phone with a 5.0.1 recovery on 5.1.1 rom. Now its stuck in a loop at SAMSUNG Galaxy S6 Edge
Logo. With Recovery is not SEANDROID ENFORCING. Any one please help.
Click to expand...
Click to collapse
Deepblackk said:
having the same problem! trying to install twrp 2.8.7.1 on my s6 flat g920I, with 5.1.1 stock! installing through odin, when i enter twrp get this message, and after reboot im stucked on a loop
Click to expand...
Click to collapse
why you do so..? and not making it as i wrote in the thread
http://forum.xda-developers.com/showthread.php?t=3144866
Alex-V said:
why you do so..? and not making it as i wrote in the thread
http://forum.xda-developers.com/showthread.php?t=3144866
Click to expand...
Click to collapse
Sorry I posted here before I finding the other thread.
How I can repair my smartphone if I already made it or it isn't solved? Please help
Hi All
Need an urgent help. While trying to root my S6 edge,India version! I think, I have bricked my phone. Its stuck on 'recovery is not seandroid enforcing'. Its only getting into the Download mode. But I have tried everything so far on the internet and no luck in fixing it. My variant version is - SM-G925I and the firmware was G925IDVU3DOK9.
Can anyone please help me with the steps to fix this issue!
Appreciate the help.
PS: Attaching the screenshot with the 'About the phone' details. Please let me know, if you need anything from my side.
Regards
Deeptiman
im trying to get my bricked s6 edge back to stock and just up an running again sm-g925f
was given to me in bricked state by my 16 year old cousin whom im trying to fix it for...
not sure if its rooted or what firmware it has on it now...
tried allsorts last 6 days, all new stock firmwares from sammmobile etc.
tried twrp etc
not sure what to do or where im going wrong.
odin wont flash any firmware file?? just gives fail after passing md5 part
Hello guys, i tried to root my G925F using the howto without tripping KNOX.
First i flashed the engineering Bootloader without any error messages in Odin. AFter that i flashed TWRP from the Thread and from there on the phone doesn't boot anymore, only the splash screen appears and nothing further. I tried to install lower versions of the TWRP. 2.8.6 , the stock recovery, other bootloaders....nothing.
My phone does not boot anymore.
Is there any hope i don't need to throw it away? Dammit i bought it yesterday and in the Thread was written it works with 5.0.2 AND 5.1.1 but it doesn't work with 5.0.2.
What can i do? If maybe try to flash a stock rom ? I am really desperate, yesterday my Galaxy ALPHA died and now this..
1. try using twrp 2.8.6.1 flashed through odin
if that doesn't work then
2. download kies 3 and then plug your device in, go to tools at the top and then firmware upgrade and initialisation, enter sm-g925f in the model number and then when it asks for your serial number then enter it from the back of the phone. (its in really faint writing) then follow the onscreen instructions
should sort it out
see at the people that flashed it on 5.0.2 it works..
you are sure having 5.0.2 because if you have 5.1.1 it will not boot if you not flash the kernel and the supersu
you can enter recovery..?
also more info
http://forum.xda-developers.com/showthread.php?p=61576005
hey guys
i need your help
my device is Galaxy S6 Edge G925i
at the moment i'm stuck and i can't do anything as i was trying to ROOT my device and after a long and hard try i manage to flash custom kernel and TWRP but i couldn't log in my device cause
i get bootloop but i can enter to TWRP so i tried to flash CF root.zip and also tried flash Arter Kernel
but.... when i try to install it through TWRP and PhllZ touch recovery when it start installing it will give me Black screen
and i have to hard rest my device to go back to either download mode or recovery mode..
so can anyone kindly help me solve this problem
Does anyone know of a system to root the new samsung marshmallow 6.0.1
i've tried the system with 2 bootloaders,
i've tried carhdrom and the samsung themes in settings is gone and i can't get to root,
so i installed the new marshmallow that samsung just posted but i can't root it with whatever old suggestions
can anyone help please
much appreciated,
sincerely
I'm also struggling.
I've flashed stock 6.0.1 (from 51.1.) and tried to flash TWRP but I get the 'Recovery is not seandroid enforcing'.
Help!
seandroid
this only means you don't have a stock samsung rom and possibly you knocked knox for service, if that keeps up at nite.
i've installed criscross new marshmallow but i lost the samsung themes option in setting,
it has a huge stock of very nice themes for free.
have a hunch that because the rom is very fresh no one has come up with a solution
let me know if you succeed.
good luck
yonster said:
I'm also struggling.
I've flashed stock 6.0.1 (from 51.1.) and tried to flash TWRP but I get the 'Recovery is not seandroid enforcing'.
Help!
Click to expand...
Click to collapse
exlaval said:
this only means you don't have a stock samsung rom and possibly you knocked knox for service, if that keeps up at nite.
Click to expand...
Click to collapse
It's a stock Samsung rom. Getting the message doesn't bother me and neither does tripping knox, but it bothers me that rather than booting into recovery I get the 'Recovery is not seandroid enforcing' and nothing else. I have to boot into download mode and get back the phone back from there.
Download space-x kernel and supersu2.67.apk from
Here -
https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQOWRXazlJU1ZoV00#list
Now flash space-x kernel from odin .
Wait for ur mobile to boot (takes time!)
When boot finished install supersu2.67.APK.
Enjoy.....
ahamed.rafi135 said:
Download space-x kernel and supersu2.67.apk from
Here -
https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQOWRXazlJU1ZoV00#list
Now flash space-x kernel from odin .
Wait for ur mobile to boot (takes time!)
When boot finished install supersu2.67.APK.
Enjoy.....
Click to expand...
Click to collapse
Thanks.
Do I need to flash to boot.img file too? At which point?
Thanks again - appreciate it.
Your welcome....
No not required only flash the tar file ignore the boot.img.....
It worked for me..
Hope it helps..
Is it tripping Knox?
Obvio....
SM G925F???
Hi there will this root method work for the international SM-G925F version?
Greetings Dudes / Dudettes
So I have the kernel flashed and SuperSU installed but still I get "Recovery is not seandroid enforcing" when trying to boot TWRP..also tried Philz same no dicee :< = no custom roms right ?
How can I fix this apart from flashing an older rom....
EDIT:
If somebody else is stuck in the future google OLD_BL_TWRP_2.8.7.2.tar it gave me a working recovery :>
EDIT2:
What appeared to be working was all nice and all but then the current stock marshmallow rom would not boot up.
according to the guys at twrp site, they do not have as yet a formal twrp version for marshmallow for the g925f
i tried just about every version out there none worked
what i want to know is how do i flash a custom rom WITHOUT TWRP - ?
Hello, recently I managed to install TWRP on my Samsung s6 edge (maybe SM-G925F)
Everything works until I flash a rom.
When is done, I click reboot phone.
Let's take an example: Pixel ROM for samsung s6 edge.
It stuck on Google logo, I waited even 1 hour and nothing.
Then I tested another rom that I don't remember the name, same problem. Stuck on loading screen.
Can somebody help me? I can only flash stock rom via ODIN but I can't flash via TWRP other roms.
Thanks.