I have the following problem: had android 6.0 properly rooted and with TWRP installed. I upgraded to 7.0 and the phone entered a bootloop. I used TWRP to flash two images (fool): a boot and a recovery. (within the android 7 zip file) I was able to get into the system and the phone seems to work fine. However nmy UMI MAX was without root and I do not have access to recovery (the icon appears and the message: "no command"). Such a bummer. When I try to access the factory mode, I actually access the menu but can not do anything and I have to force the phone off.
To add the mobile phone is not recognized by the computer in download mode. I have tried several methods and o.s. (Xp, w7, and w10). I can not get the drivers to install successfully. So I can not use the SP Flash tool. What can I do to reset root and recovery? Please help. Thank you, guys.
I ve got same problem.... I guess u hv to flash twrp wt d latest .rar scatter file of ur current Android 7 rom to gt d twrp bk on ur device then root ....because i flashed twrp wt the scatter file i used on Android 6 nd i gt a 100% wt red background which didn't work......now getting ur fone to be recognized jst run driver's installer then wen u done wt d whole blah blah of flashing twrp nd u plug ur fone jst try ro shake d usb after clicking download until d system notices ur umi max nd download complete dts how i do mine i hope dt works
I finally got the computer to recognize the phone. Then it was a matter of flashing S.O. and then the TWRP. With android 6.0 the mobile phone works perfectly.
Question: Can I install android 7 (nougat) via OTA without having to tinker with TWRP? Or do I have to update / flash TWRP too? Is there a compatible version with android 7?
Thanks!!
Upgrade to android 7.0 through ota
Download any latest max v.7.0 ROM file flash twrp
Then root
I jst dd that and I got twrp and rooted my max 7.0
Phenomenali'm said:
Upgrade to android 7.0 through ota
Download any latest max v.7.0 ROM file flash twrp
Then root
I jst dd that and I got twrp and rooted my max 7.0
Click to expand...
Click to collapse
Hi.
First of all: "Thank you" for your reply.
Second: I've the following doubt: after upgrading via OTA don't I already have O.S. 7.0?
The "Download any latest max v.7.0 ROM file flash twrp" is to use the "scatter" file of this ROM to be able to flash recovery with twrp?
Thanks again!
Yes after upgrading thru ota u already HV d 7.0 o.s
And yes downloading any latest ROM max v.7.0 file is to gt the scatter file to be able to flash recovery with twrp
Heyo Jorge are experiencing ghost touches on ur umi max?
Related
hello
i downloaded the marshmallow ROM 1.6 GB and flash it also unlocked the boot-loader and install twrp recovery and everything is perfectly fine !
i remember that my devices do not support OTG , so i follow a post here and install a custom kernel to enable it and then the devices go into boot loop
so i open the twrp recovery and flash the update.zip and su.zip in the same time , and after that the devices opened ! but it last about 15 sec and shutdown and no wife or cell is available !
i can open fastboot
i can flash twrp recovery , but it wont open
HELP :'(
update : i managed to boot into twrp from fastboot and install the update.zip , but the same problem . it says that it has low battery and shutdown immediately
update 2 : i wiped the system from twrp in order to install the update.zip from start , but now i think i have no OS , and the device wont start and the twrp wont to flash the update.zip !
update 3 : i managed to get into EMUI recovery mod and do factorey reset but it freeze on 99%
update 4 : i've been able to install Resurrection ROM and it worked but i want the stock marshmallow back ! no shutdowns and wifi works fine
Arobase40 said:
You made too many errors as the OTG kernel is only for Lollipop, NOT for Marshmallow !
Then all stock updates or stock firmwares are to be flashed with a stock recovery NOT with TWRP !
Now you're on Resurrection ROM I can't help you much but you could try to either flash a stock MM firmware with a stock recovery or the MM downgrade firmware with a stock recovery, and then a stock Lollipop !!!
Click to expand...
Click to collapse
thanks !
ok where i can get these files and how to do it , :/ help plz ..
Arobase40 said:
Then all stock updates or stock firmwares are to be flashed with a stock recovery NOT with TWRP !
Lollipop !!!
Click to expand...
Click to collapse
it works and i have the marshmallow running with everything fine and working smoothly
up up
I have the same problem I hope in writing the steps to repair
Arobase40 said:
Okay, okay, if all is fine you then just need to press the Thank button... lol
Click to expand...
Click to collapse
no man xD i want to get back to the stock rom , i need the files and how to do it xD
i meant that the rom is working smoothly xD
i need to get back to the stock room
Guys i have lava x50
I m in big trouble i flashed wrong twrp into it vai fastboot.
And so i m not able to reboot into recovery.and fastboot mode too.
After that i mwas able to boot in system
But problem increased while i reset my device it is asking for previously used google account that i forgot that account...
Now i think now the single step is remaining.to flash stock rom again but not have anything to flash plz help me guys. I need stock rom and flasger tool and procedures to do this ....
Help me guys
Search on Google....you'll get flash file from repairmymobile website....flash it through SPD flash tool
Flash lollipop stock rom
sangwan420 said:
Guys i have lava x50
I m in big trouble i flashed wrong twrp into it vai fastboot.
And so i m not able to reboot into recovery.and fastboot mode too.
After that i mwas able to boot in system
But problem increased while i reset my device it is asking for previously used google account that i forgot that account...
Now i think now the single step is remaining.to flash stock rom again but not have anything to flash plz help me guys. I need stock rom and flasger tool and procedures to do this ....
Help me guys
Click to expand...
Click to collapse
Flash the stock rom here
follow the instructions here:good:
Need CWM/TWRP Recovery for Lava Iris X50/X50 Plus
Hello,
Can I get the Recovery for lava X50/X50 plus, I am sharing the phone details here below. As it is a spreadtrum device I tried all the recoveries mentioned in this Thread by using adb fastboot method, but unfortunately nothing has worked for me.
I am enclosing the stock recovery of lava X50 plus here
About Phone
CPU-Z Soc
CPU-Z Device
CPU-Z System
Thanks in advance, hope I am expecting working cwm/twrp for this device asap!.
Why
Why u need custom recovery instead of stock recovery
Custom recovery needed to root my device
sangwan420 said:
Why u need custom recovery instead of stock recovery
Click to expand...
Click to collapse
I want to root my device, I tried various rooting softwares including kingroot but failed in each case. so finally decided to change the stock recovery as it is not allowing me to flash the supersu file. As it is Spreadtrum device SC8830 I tried flashing all the 9 recoveries mentioned here in this thread but none worked!! so I have no hope unless and untill I get specific custom recovery to this device.
Thanks in advance.:good:
TWRP for LAVA X50
Hello, friends I am very happy to share the TWRP for LAVA X50 which I ported using XDA kitchen today!!.
Also if any one want to root their lava X50 device use supersu zip version 6.0 or higher if not it will be in boot loop.
TWRP Recovery for Lava X50 working 100%.
Also u can root with this version of supersu v2.82 here
Note: For first boot phone might restart/takes time to boot so be patient and enjoyy:good::good:
sangwan420 said:
Guys i have lava x50
I m in big trouble i flashed wrong twrp into it vai fastboot.
And so i m not able to reboot into recovery.and fastboot mode too.
After that i mwas able to boot in system
But problem increased while i reset my device it is asking for previously used google account that i forgot that account...
Now i think now the single step is remaining.to flash stock rom again but not have anything to flash plz help me guys. I need stock rom and flasger tool and procedures to do this ....
Help me guys
Click to expand...
Click to collapse
can you please tell me how you flashed the recovery via fastboot. My computer is not able to even detect the device in adb. No device is detected. I have installed all the drivers. If you have anything to tell can you please tell me.
thanks
Here is the Solution watch this video
https://www.youtube.com/watch?v=kTdKmceC5xU
am not able to update twrp
twrp-3.1.0-0-onyx.img
twrp-3.0.3-0-onyx.img
twrp-3.0.2-1-onyx.img
when i flashed these files using twrp and rebooted my device i was stuck in one plus logo.
Even i cant flash any of above 3 twrp files using fastboot adb method i am getting an error "remote dtb not found" pls check screenshot
then i reinstalled twrp-3.0.2-0-onyx.img using adb fastboot method , but i cant not install or update version above 3.0.2.0 plz help
Hi guys if anyone facing same problem Read this
PROBLEM
1)Error Code 7 while flashing new ROM (like Nogut ROMS ).
2)Remote dtb not found while updating old twrp to new (eg. twrp 2.8 to twrp 3.1.0.0)
Cause of problem
Users who have already flashed and rooted their phone and using custom ROMs like CM12 CM 13 or any other from past year will likely to face this problem
while updating twrp recovery or while updating to new custom ROM Nogut cm14 .
Because new custom ROMs have bootloader in diffrent partition (something like this) so you wont be able to flash your phone with new ROMs i.e cm14 or nogut or you wont be able to flash new twrp recovery which is 3.1.0.0
Please keep in mind if you are using following twrp version then you should flash your phone with old twrp 2.8.7.0
twrp-3.0.2-0-onyx.img 14.4M 2016-04-04 23:04:23 EDT
twrp-3.0.1-0-onyx.img 14.5M 2016-04-01 04:24:54 EDT
twrp-3.0.0-1-onyx.img 14.5M 2016-02-15 23:17:25 EST
twrp-3.0.0-0-onyx.img 14.4M 2016-02-06 09:18:41 EST
above point is important look at the solution now
Solution
Step
1)flash your phone with old twrp version TWRP 2.8.7.0 using fastboot method(because we are going to install stock recovery in my case stock recovery of oneplus X lollipop version)
2)after installing stock recovery install 2.14 ver of stock ROM of oneplus X (for oneplus x devices) (for other brands eg samsung look for ur old stock recov and ROM)
3)install old Stock ROM in ur device
4)now again boot into stock recovery and install latest stock ROM (for oneplus X i installed latest oneplus X oxygen OS 3.1.4).
5)after doing above step you can install latest twrp-3.1.0-0-onyx.img without any "remote dte not found error" using fastboot.
6)once you flash twrp-3.1.0-0-onyx.img flash your phone with latest CM14 or any latest android N or nogut ROM without any problem
Note : For error code 7 some people suggested to edit udatescrip file which is not good solution and it is temporary and it wont work for all so do it as i suggested
Comman ERRORS :
1) if you are on twrp 3.x.x.x you will face Remote dte not found while booting your phone in stock recovery using fastboot
so first of all flash your phone with old twrp 2.8.7.0.
2)Do not wipe your internal storage in frustration it will create more problems because you wont be able to transfer files into your phone to flash it (Use OTG cable or SD card if u did it already).P.S you can do it afterwards
Do i need to install stock recovery of stock ROM ? some help would really be appreciated
i can install all twrp upto "twrp3020 " version
but if i try to flash greater version like twrp3021 or twrp3100 m getting same error
i need new twrp because i am not able to flash Android N custome roms i am getting an error code 7 when i am installing ROM
Follow the mega unbrick guide, then update your bootloader then flash latest twrp.
@Joshwin Aranha
CheckYourScreen said:
Follow the mega unbrick guide, then update your bootloader then flash latest twrp.
@Joshwin Aranha
Click to expand...
Click to collapse
thanx for replay but i found solution
Hi guys if anyone facing same problem Read this
PROBLEM
1)Error Code 7 while flashing new ROM (like Nogut ROMS ).
2)Remote dtb not found while updating old twrp to new (eg. twrp 2.8 to twrp 3.1.0.0)
Cause of problem
Users who have already flashed and rooted their phone and using custom ROMs like CM12 CM 13 or any other from past year will likely to face this problem
while updating twrp recovery or while updating to new custom ROM Nogut cm14 .
Because new custom ROMs have bootloader is diffrent partition (something like this) so you wont be able to flash your phone with new ROMs i.e cm14 or nogut or you wont be able to flash new twrp recovery which is 3.1.0.0
Please keep in mind if you are using following twrp version then you should flash your phone with old twrp 2.8.7.0
twrp-3.0.2-0-onyx.img 14.4M 2016-04-04 23:04:23 EDT
twrp-3.0.1-0-onyx.img 14.5M 2016-04-01 04:24:54 EDT
twrp-3.0.0-1-onyx.img 14.5M 2016-02-15 23:17:25 EST
twrp-3.0.0-0-onyx.img 14.4M 2016-02-06 09:18:41 EST
above point is important look at the solution now
Solution
Step
1)flash your phone with old twrp version TWRP 2.8.7.0 using fastboot method(because we aree going to install stock recovery in my case stock recovery of oneplus X lollipop version)
2)after installing stock recovery install 2.14 ver of stock ROM of oneplus X (for oneplus x devices) (for other brands eg samsung look for ur old stock recov and ROM)
3)install old Stock ROM in ur device
4)now again boot into stock recovery and install latest stock ROM (for oneplus X i installed latest oneplus X oxygen OS 3.1.4).
5)after doing above step you can install latest twrp-3.1.0-0-onyx.img without any "remote dte not found error" using fastboot.
6)once you flash twrp-3.1.0-0-onyx.img flash your phone with latest CM14 or any latest android N or nogut ROM without any problem
Note : For error code 7 some people suggested to edit udatescrip file which is not good solution and it is temporary and it wont work for all so do it as i suggested
Comman ERRORS :
1) if you are on twrp 3.x.x.x you will face Remote dte not found while booting your phone in stock recovery using flashboot
so first of all flash your phone with old twrp 2.8.7.0.
2)Do not wipe your internal storage in frustration it will create more problems because you wont be able to transfer files into your phone to flash it (Use OTG cable or SD card if u did it already).P.S you can do it afterwards
mhmm.. the unbrick guid dosnt help.. followd the guidé - now my bootloader is locked and stuck locked so no 2.8.7.0 flashing.. Ideas? i`m working now 24h this issue..
Wagner.B said:
mhmm.. the unbrick guid dosnt help.. followd the guidé - now my bootloader is locked and stuck locked so no 2.8.7.0 flashing.. Ideas? i`m working now 24h this issue..
Click to expand...
Click to collapse
are you on stock recovery right now ?
Finaly the Lv.2 support got it back working via "our" msm unbrick tool (Still got it on my drive =D)
but learned nothing - trying to get lineageOS again.
The recovery is now TWRP v3.1.0-0 for E1003_15_161107 (it works for now on a backup..)
But... i must say - I'm very worried that i cant flash lineage again..
I dont know what the trick is...
Here is the Solution watch this video
https://www.youtube.com/watch?v=kTdKmceC5xU
Yes!!
I ve been looking for a solution the past days since i got stuck in older twrp versions and could only upgrade to android 6.
Thanks man!! You rock!!
Hello, I updated to Q and can't get it rooted.
It bootlooped.
How can I root Android Q?
visit: h t t p s : / / twrp.me/site/update/2019/10/23/twrp-and-android-10.html
As, if now you cannot. For Android Q, it's still in research.
------------------------------------------------------------------------
Never tried but: ClockworkMod Recovery – a past alternative to TWRP custom recovery.
h t t p s : / / en.wikipedia.org/wiki/ClockworkMod#ClockworkMod_Recovery
Research over it & let me know if anything worked for you-!
I successfully roote Q with this ?
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
I just flash TWRP, format and flash custom rom. Rooted.
First of all. What device do you have and what exactly have you tried? Include references.
Remember first step is to search before asking.
Guys need to re root my device on android 10 cuz i had it root under android 9 and cannot use s health
Need to root to chanfe the build prop command to use s health
Also missing the heart monitor pressure
Please help me
G965f
StonebridgeGr said:
Guys need to re root my device on android 10 cuz i had it root under android 9 and cannot use s health
Need to root to chanfe the build prop command to use s health
Also missing the heart monitor pressure
Please help me
G965f
Click to expand...
Click to collapse
I would recommend you flashing custom firmware, like the one in my signature. Everything is working, including Security Folder.
Rooting S9 +
sarjarim said:
I just flash TWRP, format and flash custom rom. Rooted.
Click to expand...
Click to collapse
Which TWRP version you used and how did you install TWRP on a non-rooted phone? Do you not have to use Magisk to root the phone first?
xectis said:
Which TWRP version you used and how did you install TWRP on a non-rooted phone? Do you not have to use Magisk to root the phone first?
Click to expand...
Click to collapse
I just used the 3.3.1.1 from the TWRP site.
Flash TWRP is to root, so I did it b4 root.
1. OEM unlock
2. Flash TWRP with odin then boot to TWRP, samsung will restore if u normal boot.
3. Backup EFS
4. Format data wipe all
5. Dm verity, search newest from dr ketan
6. Flash custom ROM.
Magisk usually comes with the custom ROM.
sarjarim said:
I just used the 3.3.1.1 from the TWRP site.
Flash TWRP is to root, so I did it b4 root.
1. OEM unlock
2. Flash TWRP with odin then boot to TWRP, samsung will restore if u normal boot.
3. Backup EFS
4. Format data wipe all
5. Dm verity, search newest from dr ketan
6. Flash custom ROM.
Magisk usually comes with the custom ROM.
Click to expand...
Click to collapse
Magic! Thanks bro.
For Android 10 U9 bootloader, is not more possible flash custom binaries... even twrp!
G965FXXU9ETF5
hi im new to this but what do you mean by Q??
i have sprint s9+ sm-g965u1, can i root my phone now ?
Devilix said:
For Android 10 U9 bootloader, is not more possible flash custom binaries... even twrp!
G965FXXU9ETF5
Click to expand...
Click to collapse
This isn't true I flashed Twrp 3.5.091 via Odin, S9+ exynos android 10, then flashed Magisk 21.4.
When I got phone it was android 10 June 2020 security update. It then updated again to 21/02/2021 ota.. I was able to flash recovery twrp and root/debloat. Only problem I did find is that I cannot flash lineage 18.1 or any custom roms.
Regards
JeyKul said:
Hello, I updated to Q and can't get it rooted.
It bootlooped.
How can I root Android Q? No root method root android Q.
Click to expand...
Click to collapse
hey ,
1.install magisk manager on your phone
2.download the firmware from samfirmware for your model of phone to pc
3.download 7zip with lz4
4. use 7zip lz4 to extract boot img from AP(firmware)
5. send the xtracted boot.img to phone sdcard and use magisk manager to patch said image .
6. send the patched img to pc and use 7zip to create archive as boot.tar file
7. one you install the firmware as normal via odin (disable auto reboot ) go back and disconnect/reconnect usb from phone so it appears as added in odin once more.
8. add the boot.tar file to AP in odin and flash the phone , reboot system and install magisk manager again , go into magisk and it will reboot again to fix the root.
there is a video somwhere on youtube showing you better than ive tried to here.
this is by far he best way as you can still take ota updates because stock recovery is still present .
regards
For whatever reason I can't budge the tool to flash the latest fastboot ROM on my Xiaomi Mi 8 Lite that I plan to sell since my new phone arrived today. A custom ROM from the last year is currently installed on the device.
I installed the latest Universal ADB drivers, installed the latest Mi Flash tool (2020.3.14.0), put the phone in fastboot mode, connected to PC via USB 2.0 port and tried to flash the latest fastboot stable ROM via the tool with "clean all" option and most of the time what happens when I hit the flash button, the fastboot logo on the phone disappears and in the left top corner a small white text "hit any button to restart" or something like that appears. Only once a progress bar appeared with $fastboot bla bla bla II echo missmatching image and device" and that was it... no progress, again the white text prompting me to hit any button to restart appeared on the screen.
Any ideas what I am doing wrong? cmonBruh
Phone: Xiaomi Mi 8 Lite 64/4 Global (platina with custom ROM installed) Windows 10 Pro 1909, MSI B350M Bazooka with AMD Ryzen 5 2600.
Hello.. I will try to help you.. And tell me if you fixed that..
Can you install a custom recovery? Twrp?
Id you can do that fallow my steps..
First download the fallowing twrp from here :
https://drive.google.com/file/d/14cRc4UG4hzL45cDhdFZ7odr5Kb8LSai0/view
It can support ota update and your phone will boot I used it to flash my mi 8 lite without pc. And works!
Download and flash that twrp using mi flash tool. I hope your bootloader is unlocked if you already have other twrp installed simply flash the twrp zip file. And update your recovery. If you don't have any twrp installed simply rename. Zip file into .img file and flash it with flash tool. If you can't flash it using flash tool try to install any other twrp and then install the zip and update the twrp
After you installed twrp go and download recovery Rom from here :
https://mirom.ezbox.idv.tw/en/phone/platina/
Download the first rom called : V11.0.2.0.QDTMIXM (1.8GB zip file)
( Recovery
miui_MI8LiteGlobal_V11.0.2.0.QDTMIXM_5574e03233_10.0.zip
Filesize
1.8G
MD5
5574e032330450c44c34d7f054de477b
Link
Download (Download to Mi Router)
Press download. Not download to mi router and don't forget.. Download the recovery zip file not the fast boot update!
After you downloaded boot in to twrp which I gave you above, wipe system / data / vendor / cache/dalvik and flash the zip file.
You can flash it with and without to wipe anything. But it is recommended to wipe. Pls go try and install it without to wipe anything, if it works ( for me works!) after flash done boot the phone and see if there is any problem. If u got any bugs or problems perform a clean flash wipe all and then flash!
Id you want root.. Fallow this :
You can root your phone with latest magisc manager using the same twrp. After you flash the boot.img with twrp press restart phone. If it won't restart go again to recovery and format only your data. And your will phone will boot again and you will get root acces. It's the only way to root android 10.
Please let me know if you fixed that problem.. And you flashed successfully the Rom..
DON'T FLASH THE ROM USING ANOTHER TWRP! ONLY THAT RECOVERY I GIVE SUPPORT OTA UPDATE AND CAN BYPASS THE XIAOMI Verification FOR THE STOCK ROM.. IF YOU USE ANY OTHER TWRP YOUR PHONE WILL BE STUCK IN Boot! Orange fox or any other twrp won't work!
I used this method and works like a charm