OnePlus seems to have enabled aptX codecs in the new OB5/14 for the OnePlus 3/T.
For those of you who don't want to wait until the stable release and also would rather not flash the open beta, @Chaosgod27 has extracted the related files for use in the stable release. These files can be placed within OOS 4.1.X to enable aptX mode. These files are different from the old aptX-enabling files that were broken in OOS since updating to 7.1.1.
Edit: It seems there's some issues with the stacks. Playback does use aptX, but music is playing at a slightly higher pitch and faster than it should be.
I've dug around through the files in the new open beta and found the files myself. It seems there were a few missing before. The issue with the raised pitch and fast playback should be gone now.
Flashable Zip (through custom recovery, does not require Magisk): View attachment 4121507
Magisk Module (same thing, just systemless): View attachment 4121508
There was an issue before with some missing files that caused playback to run too fast and with a higher pitch. That has been fixed now. If anyone flashed the old Magisk module, I would advise you to download the new one in the OP and flash over it. I've also included a flashable zip for those of you who aren't using Magisk.
Anova's Origin said:
There was an issue before with some missing files that caused playback to run too fast and with a higher pitch. That has been fixed now. If anyone flashed the old Magisk module, I would advise you to download the new one in the OP and flash over it. I've also included a flashable zip for those of you who aren't using Magisk.
Click to expand...
Click to collapse
Thanks a million
Thank you, I have installed it but it seems to have a lot more problems (noise/cracking as in packets lost or something) than the previous version that I was using and which I got from here:
https://forum.xda-developers.com/oneplus-3/themes/mod-aptx-codec-t3521228
Is there any way to uninstall this version and return to "old default" (from where I can get back to the aptx version from above)?
xclub_101 said:
Thank you, I have installed it but it seems to have a lot more problems (noise/cracking as in packets lost or something) than the previous version that I was using and which I got from here:
https://forum.xda-developers.com/oneplus-3/themes/mod-aptx-codec-t3521228
Is there any way to uninstall this version and return to "old default" (from where I can get back to the aptx version from above)?
Click to expand...
Click to collapse
If you used the Magisk module, simply delete the module and reboot.
If you flashed the regular zip, you'll have to dirty flash your ROM to restore to default.
Hi @Anova's Origin, how do i know if this mod is working or not?
Vixiebalistic said:
Hi @Anova's Origin, how do i know if this mod is working or not?
Click to expand...
Click to collapse
Use a logcat app (Catlog / Matlog) and search for an aptx entry in the recorded logs after you connected your aptx capable device via Bluetooth to your aptx enabled phone...
You should be able to find something if it's working, otherwise it wouldn't show any aptx entry
Sent from my OnePlus3T using XDA Labs
Edit 2: Nevermind, it's working now. Idk what the problem was.
Didn't work for me on OOS 4.1.6 on Oneplus 3T I can't turn on Bluetooth. Anyone else having this problem? Also, have the drivers been updated in a newer OB?
Edit: I am using magisk v13.3
vini2710 said:
Didn't work for me on OOS 4.1.6 on Oneplus 3T I can't turn on Bluetooth. Anyone else having this problem? Also, have the drivers been updated in a newer OB?
Click to expand...
Click to collapse
Nope... Working fine here with op3t 4.1.6. Did u make back up before flashing?
Vixiebalistic said:
Nope... Working fine here with op3t 4.1.6. Did u make back up before flashing?
Click to expand...
Click to collapse
I used magisk so no worries (v13.3)
Edit: It's working. Yay! Thank you for the good work with this module!
how about op3T 4.1.7? Is it work?
qwealan said:
how about op3T 4.1.7? Is it work?
Click to expand...
Click to collapse
It works flawlessly for me on OOS 4.1.7 on my op3t
Sent from my ONEPLUS A3003 using Tapatalk
Anyone, test Magisk module with lineageOS Rom ?
vinicentus said:
It works flawlessly for me on OOS 4.1.7 on my op3t
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
I use Magisk Module on OOS4.1.7 but i cant use aptX (use catlog search "aptx" ). are you use zip flash or use Magisk too?
qwealan said:
I use Magisk Module on OOS4.1.7 but i cant use aptX (use catlog search "aptx" ). are you use zip flash or use Magisk too?
Click to expand...
Click to collapse
I am using magisk (v14)
Working on OP3T with OOS 4.5.1 + Magisk 14.0. Those libs where updated to show battery for devices in OB15, update needed.
Thanks very much! Looking for this about a week long and finally solved
My device is OP3T, with H2OS V3.5 stable, no magisk
can I share this to oneplusbbs.com?
Related
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
MaxtremePL said:
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
Click to expand...
Click to collapse
Can you share the audio mods you used?? Thanks
---------- Post added at 10:43 PM ---------- Previous post was at 10:42 PM ----------
shakaraja said:
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
Click to expand...
Click to collapse
Thanks for the detailed guide... Will test now thanks
anees167 said:
Can you share the audio mods you used?? Thanks
Click to expand...
Click to collapse
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Did you disable boot to stock recovery and also you may have to fastboot recovery
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
I have distorted sound using the v4a. How fix it?
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
It dosent work getting distorted sound
viper4android install than sound break problem is fix?
mohamm3edadam said:
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Click to expand...
Click to collapse
You need the TWRP version meant for H2OS. You will find it in any H2OS based ROM thread.
Skick3 said:
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
Click to expand...
Click to collapse
Yes, there are options. Find gain controls and tweak them to your preference.
ras_fyah said:
I have distorted sound using the v4a. How fix it?
Click to expand...
Click to collapse
Akhil701 said:
It dosent work getting distorted sound
Click to expand...
Click to collapse
If you still are on OOS 2.2.x then V4A will not work. This fix is specifically meant for OOS 3.
If you are on OOS 3, then try reflashing OOS 3 with a clean flash. This might fix it, but only if you are on OOS 3.
mvha said:
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Click to expand...
Click to collapse
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
locxFIN said:
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
Click to expand...
Click to collapse
Search XDA Forums for V4A profiles and use a preferred profile according to your type of music.
whwhdtk5689 said:
viper4android install than sound break problem is fix?
Click to expand...
Click to collapse
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
arch_geek said:
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
Click to expand...
Click to collapse
yes. i'm oos 3.0 MM.
wow i'm install now viper4android !
thank you !
arch_geek said:
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
Click to expand...
Click to collapse
You've Got a Point. I have installed wrong version of V4A. Now working all. Thank You
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
shakaraja said:
Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Click to expand...
Click to collapse
Hm i had the same problem. Driver Status was false.
My Workaround was i clicked in Viper many Menus up an down. Lock Effect Mode disable to speaker. UI Setting to Expert and suddenly the Driver Status was True.
No cleaning data. I didn´t installed google play music.
With Viper4Anroid on OO2 Oxygen3 the sound are definitly noiser and better. (Master Gain (Limiter) / Output Gaine -20db)
Thx for the hint with these app.
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
How to root your phone. You find it in these guide
> http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
MaxtremePL said:
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
Click to expand...
Click to collapse
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
If you flashed OOS 3, it is highly likely that the build was not a pre-rooted build. To root follow this guide at this link :
http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
anees167 said:
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
Click to expand...
Click to collapse
Actually V4A can be tweaked to sound better than MaxxAudio. Try XtremeMUSIC mod by androidexpert35. It includes V4A as an addon.
Link to the above mod is here: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
&roid said:
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
Click to expand...
Click to collapse
Try XtremeMUSIC mod. Link: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
This is a collection of small changes to fix things on my Moto G4 XT1626 that others may find useful.
ElementalX 1.02 with DTV driver:
This is the great and stable ElementalX Kernel from flar2, without any code changes, but with the ISDBT TV kernel driver that he didn't include in the official version, useful for XT1626 owners that want root but need the DTV receiver working.
Disable esdfs:
This is a magisk module (can also be flashed if you don't use magisk) to disable ESDFS and use FUSE instead, so apps like apps2sd work properly on the moto G4 or G4 Plus.
MotoG4 incall record enabler:
This is a magisk module (can also be flashed) that changes the mixer controls mapping to allow incall recording using any playstore app(even without root). Tested with ACR, works fine. This was made for Stock Nougat, untested on other roms.
I will add more quirks and mods I develop in the future to this thread.
Working Fine ?
_wyrm said:
This is a collection of small changes to fix things on my Moto G4 XT1626 that others may find useful.
ElementalX 1.02 with DTV driver:
This is the great and stable ElementalX Kernel from flar2, without any code changes, but with the ISDBT TV kernel driver that he didn't include in the official version, useful for XT1626 owners that want root but need the DTV receiver working.
Disable esdfs:
This is a magisk module (can also be flashed if you don't use magisk) to disable ESDFS and use FUSE instead, so apps like apps2sd work properly on the moto G4 or G4 Plus.
MotoG4 incall record enabler:
This is a magisk module (can also be flashed) that changes the mixer controls mapping to allow incall recording using any playstore app(even without root). Tested with ACR, works fine. This was made for Stock Nougat, untested on other roms.
I will add more quirks and mods I develop in the future to this thread.
Click to expand...
Click to collapse
Anyone tried the call recording on custom room?
Waycloud said:
Working Fine ?
Click to expand...
Click to collapse
On stock ROM?
How can I get the DTV driver or the last ElementalX with DTV driver?
brunopio said:
How can I get the DTV driver or the last ElementalX with DTV driver?
Click to expand...
Click to collapse
I want to know too. My model is XT1626
Doesn't the last ElementalX has the DTV driver included already? I believe flar2 started including the DTV driver a couple weeks after I created this thread.
_wyrm said:
MotoG4 incall record enabler:.
Click to expand...
Click to collapse
Thank you very much, in particular for the call recording. Although the recording app I had been using (CallRec) did not detect the new VOICE_COMMUNICATION stream, as you mention in the OPs it works fine with ACR. I'm running it in recent LOS 14.1 Athene builds on an XT1625.
One (somewhat off topic) question: I switched from LOS SU to Magisk in order to install this module. Except for a few other apps that seem to prefer LOS SU I'm happy with Magisk managing SU but in case I want to switch back to LOS SU ...is there a way to get this installed while using LOS SU. Perhaps this is a question for the Magisk thread but I've found no answers by searching so I'm starting here. Thanks again!
---------- Post added at 05:56 PM ---------- Previous post was at 05:48 PM ----------
optionalmgrr.la said:
Anyone tried the call recording on custom room?
Click to expand...
Click to collapse
Lineage OS as described in previous post section.
IronTechmonkey said:
One (somewhat off topic) question: I switched from LOS SU to Magisk in order to install this module. Except for a few other apps that seem to prefer LOS SU I'm happy with Magisk managing SU but in case I want to switch back to LOS SU ...is there a way to get this installed while using LOS SU. Perhaps this is a question for the Magisk thread but I've found no answers by searching so I'm starting here. Thanks again!
Click to expand...
Click to collapse
All this modules does is replace/bind (mount -bind), /system/etc/mixer_paths.xml with a custom version. You can do the same with a shell script, luckypatcher, or any other root app that alows you to selectively replace files in the system. You can also simply replace the file directly in LOS's /system/ if you want to make it permanent and don't care about keeping /system untampered.
Hope we can have call recording on LOS
hello plz help me in to enable call recordings in moto g5 plus
please friend
_wyrm said:
This is a collection of small changes to fix things on my Moto G4 XT1626 that others may find useful.
ElementalX 1.02 with DTV driver:
This is the great and stable ElementalX Kernel from flar2, without any code changes, but with the ISDBT TV kernel driver that he didn't include in the official version, useful for XT1626 owners that want root but need the DTV receiver working.
Disable esdfs:
This is a magisk module (can also be flashed if you don't use magisk) to disable ESDFS and use FUSE instead, so apps like apps2sd work properly on the moto G4 or G4 Plus.
MotoG4 incall record enabler:
This is a magisk module (can also be flashed) that changes the mixer controls mapping to allow incall recording using any playstore app(even without root). Tested with ACR, works fine. This was made for Stock Nougat, untested on other roms.
I will add more quirks and mods I develop in the future to this thread.
Click to expand...
Click to collapse
Please friend, you could include the DTV XT1626 driver in this kernel Vegito:
mega.nz/#!1R8XSRCD!L1pQiukRxflWfdPfiKmO13rIRdUn1RLaXUhFeGsIsuU
This kernel works best with the XT1626
yeah would be great
I can use DTV drivers on xt1625?
Sent from my [device_name] using XDA-Developers Legacy app
hope these modules get update to magisk 16, because here when i tried to flash over magisk manager or twrp, shows an error saying that magisk is not installed on system
nodio said:
hope these modules get update to magisk 16, because here when i tried to flash over magisk manager or twrp, shows an error saying that magisk is not installed on system
Click to expand...
Click to collapse
I desperately needed call recording feature on my Moto G4 Plus so I updated it myself to work with the latest version of Magisk (17.1). Here the file if you need it : drive.google.com/file/d/1fcO6FqFVXCUtwrFVTEijUG3LDaOWRmBP/view?usp=sharing
mithleshjs said:
I desperately needed call recording feature on my Moto G4 Plus so I updated it myself to work with the latest version of Magisk (17.1). Here the file if you need it : drive.google.com/file/d/1fcO6FqFVXCUtwrFVTEijUG3LDaOWRmBP/view?usp=sharing
Click to expand...
Click to collapse
I gave your version a try because I'm also running Magisk 17.1 and it trashed my system, wasn't expecting that much fun to happen.
After I installed module and rebooted the phone it just went to recovery mode, was forced to do a full reset.
Others be warned, try at your own risk...
lin_ux said:
I gave your version a try because I'm also running Magisk 17.1 and it trashed my system, wasn't expecting that much fun to happen.
After I installed module and rebooted the phone it just went to recovery mode, was forced to do a full reset.
Others be warned, try at your own risk...
Click to expand...
Click to collapse
FWIW I once used this on a Moto G4 Athene XT1625 running LOS 14.1 and Magisk 16x with no problems. Don’t know about Magisk 17 as I use LOS SU except when specifically testing something else but it's a simple mod which really "should" not cause that much trouble. In any event once you get your device back in shape you could try to enable call recording manually: https://forum.xda-developers.com/showpost.php?p=73603492&postcount=9.
[EDIT] Added details about device on which I had tested this in Magisk.
IronTechmonkey said:
FWIW I once used this on a Moto G4 Athene XT1625 running LOS 14.1 and Magisk 16x with no problems. Don’t know about Magisk 17 as I use LOS SU except when specifically testing something else but it's a simple mod which really "should" not cause that much trouble. In any event once you get your device back in shape you could try to enable call recording manually: https://forum.xda-developers.com/showpost.php?p=73603492&postcount=9.
[EDIT] Added details about device on which I had tested this in Magisk.
Click to expand...
Click to collapse
Thanks for your reply!
I agree that the mod should not have caused so much trouble, which is why I was a little shell shocked when it refused to boot to anything other than recovery. I'd just got the device set up nice and hadn't done a TWRP backup yet, so getting it back up and running again was a little painful, but perhaps good in a way as I'd learnt what didn't work well first time round, so this time it's lean and mean...
I've taken a look at the files enclosed in the mod (I know, I should have done that before installing it ... doh! ) and discovered that the location of mixer_paths.xml is different on my system, it's in /vendor/etc/ so I went ahead and swapped the modded file (I have root access) with my one and rebooted, phone came up with no sound output at all, so it looks like my newer system (and device, it's a Moto E5 XT1944-6) are not compatible with the modded mixer_paths.xml file.
I'd like to know which elements of the modded mixer_paths.xml file were change to make it work on the G4, I could then try to add/edit those particular ones in my mixer_paths.xml file to see if it works.
I have a backup of my original file so no pain in trying new settings....
For reference I'm running this ROM on my phone,
[GSI][8.1.0][OFFICIAL] Resurrection Remix O v.6.1.0 [08/18][ARM/ARM64]
it's quite impressive...
https://forum.xda-developers.com/pr...si-resurrection-remix-o-6-1-0-t3811299/page11
lin_ux said:
I gave your version a try because I'm also running Magisk 17.1 and it trashed my system, wasn't expecting that much fun to happen.
After I installed module and rebooted the phone it just went to recovery mode, was forced to do a full reset.
Others be warned, try at your own risk...
Click to expand...
Click to collapse
It shouldn't have caused so much trouble. It worked successfully on each of my friends Moto G4 Plus running stock ROM.
Has anyone gotten Viper4Android working on their Galaxy S9+ yet? If so, on which ROM or OS version?
UPDATE: I've found that this version of ARISE works perfectly on my S9+, here are my working arise_customize.prop settings:
I installed this over a ROM using Magisk, so I made sure to include the core and the magiskcompatibility module first.
I then selected ViPER4Arise 2.5.0.5, and didn't install anything else.
Yes, it is working great on LightROM on my S9+
VICosPhi said:
Yes, it is working great on LightROM on my S9+
Click to expand...
Click to collapse
I see LightROM includes Dolby Atmos, did it also then include v4a or did you flash a specific v4a package?
I flashed the V4A zip file via TWRP that I had downloaded from one of the S8 forums when I had S8 and it worked fine
VICosPhi said:
I flashed the V4A zip file via TWRP that I had downloaded from one of the S8 forums when I had S8 and it worked fine
Click to expand...
Click to collapse
Slick, thanks man! I'll give that a shot, I still have the Arise installer that used for my S8 myself so I'll see if that takes
Sent from my Galaxy S8 using XDA Labs
benmeroff said:
Slick, thanks man! I'll give that a shot, I still have the Arise installer that used for my S8 myself so I'll see if that takes
Sent from my Galaxy S8 using XDA Labs
Click to expand...
Click to collapse
Yes that was it, the ARISE package. It works
Sent from my SM-G965U1 using Tapatalk
Hi
I have good sound with viper ?
I use version for magisk and is not good. Volume is poor
Its possible To give me one link of your viper ?
Thanks
VICosPhi said:
Yes that was it, the ARISE package. It works
Click to expand...
Click to collapse
So I've tried using the ARISE Magnum Opus 20170724 installer I had, but on any stock-based ROM it just bootloops the system. Which one works for you? I can see now I was several ARISE versions behind but would prefer not spend time waiting for my rather sizeable Nandroid to restore between testing versions if at all possible lol...
Sent from my Galaxy S8 using XDA Labs
I haven't tried it on stock yet. Maybe try a custom kernel first then try flashing it.
Sent from my SM-G965U1 using Tapatalk
It would be amazing if we could figure out which version of Viper works on the S9+ and maybe some simple steps..
babyboy3265 said:
It would be amazing if we could figure out which version of Viper works on the S9+ and maybe some simple steps..
Click to expand...
Click to collapse
benmeroff said:
Has anyone gotten Viper4Android working on their Galaxy S9+ yet? If so, on which ROM or OS version?
UPDATE: I've found that this version of ARISE works perfectly on my S9+, here are my working arise_customize.prop settings:
I installed this over a ROM using Magisk, so I made sure to include the core and the magiskcompatibility module first.
I then selected ViPER4Arise 2.5.0.5, and didn't install anything else.
Click to expand...
Click to collapse
Sent from my Galaxy S8 using XDA Labs
benmeroff said:
So I've tried using the ARISE Magnum Opus 20170724 installer I had, but on any stock-based ROM it just bootloops the system. Which one works for you? I can see now I was several ARISE versions behind but would prefer not spend time waiting for my rather sizeable Nandroid to restore between testing versions if at all possible lol...
Sent from my Galaxy S8 using XDA Labs
Click to expand...
Click to collapse
i find flashing (smeejaytee - feelthebeats toolbox) from (ARISE+Deuteronomy+2.94+Modular+AROMA) fixes 9/10 issues faced after the magnum opus installation,
ive been using this method for a while now and not really had any problems, just a long winded process installing it all but havnt found A simpler method yet, hope this helps
Which versions of viper did you install? I have a lg g7 with snapdragon 845th in the magisk modules occur again and again sound problems with the volume. as described by a user here in the thread.
Sony92 said:
Which versions of viper did you install? I have a lg g7 with snapdragon 845th in the magisk modules occur again and again sound problems with the volume. as described by a user here in the thread.
Click to expand...
Click to collapse
I just tried flashing this and made sure to install the FeelTheBeats script that YZFR90 recommended in the Aroma installer, and after rebooting and disabling SELinux within Viper4Android settings (after enabling developer mode) it works perfectly for me on Magisk so far.
YZFR90 said:
i find flashing (smeejaytee - feelthebeats toolbox) from (ARISE+Deuteronomy+2.94+Modular+AROMA) fixes 9/10 issues faced after the magnum opus installation
Click to expand...
Click to collapse
OK thanks. because with the viper modules directly from magisk, i only have problems of sound and volume
install the zhuhang version via magisk
that is all
exocetdj said:
install the zhuhang version via magisk
that is all
Click to expand...
Click to collapse
I have only the problems with the volume and the bad quality.
benmeroff said:
I just tried flashing this and made sure to install the FeelTheBeats script that YZFR90 recommended in the Aroma installer, and after rebooting and disabling SELinux within Viper4Android settings (after enabling developer mode) it works perfectly for me on Magisk so far.
Click to expand...
Click to collapse
its not working.
the viper4arise apk crashes
Sony92 said:
its not working.
the viper4arise apk crashes
Click to expand...
Click to collapse
If you haven't already, I'd make sure any other V4A Magisk modules or APKs are all uninstalled, then try reinstalling just that ZIP.
Sent from my Galaxy S9+ using XDA Labs
Installation fails. ends with error 2xx
It may be that viper is not completely compatible with the snapdragon. I'm really restless. have already tried several versions
Hi all,
I just modified the module from @snowwolf725 to have a newer template so it can run on oreo rom
If you need to use nfc-sim on oneplus 3/3t you could try this module.
[Install]
1. Get Magisk
2. In the download area search for "OnePlus 3/t NFC Sim Enabler"
3. Reboot
4. If your manage app require permission you can give it at settings-apps-app permissions-additional permissions, toggle smartcardservice for it
I only test it on OOS Oreo ROM, it may not work on custom rom due to different framework built in.
You can report here so I'll check what other MOD have to add to make other ROM work.
the smartcardservice is modified from SEEK for Android by Johnzweng
Repo link
crazymika said:
Hi all,
I just modified the module from @snowwolf725 to have a newer template so it can run on oreo rom
If you need to use nfc-sim on oneplus 3/3t you could try this module.
[Install]
1. Get Magisk
2. In the download area search for "OnePlus 3/t NFC Sim Enabler"
3. Reboot
4. If your manage app require permission you can give it at settings-apps-app permissions-additional permissions, toggle smartcardservice for it
I only test it on OOS Oreo ROM, it may not work on custom rom due to different framework built in.
You can report here so I'll check what other MOD have to add to make other ROM work.
the smartcardservice is modified from SEEK for Android by Johnzweng
Repo link
Click to expand...
Click to collapse
Any chance that this mod used on htc m9 with aicp 13.1, rooted with magisk?
tombbb said:
Any chance that this mod used on htc m9 with aicp 13.1, rooted with magisk?
Click to expand...
Click to collapse
I don't think so, it's NFC chip specified so if you have a different device it's xml config would be different.
For m9 you could look through it's stock rom to adjust configuration, I believe the M9 stock ROM support NFC-SIM card.
What does nfc sim means?
prasant737 said:
What does nfc sim means?
Click to expand...
Click to collapse
In some places we have our payment/transportation card integrated in SIM card.
so we can use our phone to pay/take public transportation.
hi sir able to update it for oneplus 6t android pie?
laocheebye said:
hi sir able to update it for oneplus 6t android pie?
Click to expand...
Click to collapse
according your ID I assume you are Taiwanese, there is modification for oneplus 6 on mobile01, i think that will also work for 6t
I didn't have 6t so I can't test on it.
crazymika said:
according your ID I assume you are Taiwanese, there is modification for oneplus 6 on mobile01, i think that will also work for 6t
I didn't have 6t so I can't test on it.
Click to expand...
Click to collapse
i am singaporean actually. can u link me the thread? i can read chinese so its fine. thank you deep deep.
---------- Post added at 02:27 PM ---------- Previous post was at 02:12 PM ----------
i found the thread and the download link if anyone is interested to try for oneplus 6 or 6t.
forum link in chinese
flashable zip
i havent tried cos there is no decrypt twrp for 6t yet so at your own risk people.
I had asked about it to the author directly on github since since my test are not successful. No update since then...
https://github.com/Magisk-Modules-Repo/oneplus3simnfc/issues/2
NoobZik said:
I had asked about it to the author directly on github since since my test are not successful. No update since then...
https://github.com/Magisk-Modules-Repo/oneplus3simnfc/issues/2
Click to expand...
Click to collapse
I'll update this to pie compatible when oos pie released
crazymika said:
I'll update this to pie compatible when oos pie released
Click to expand...
Click to collapse
Hello, any news ?
Hi, just tried the latest v1.2.1, but it seems HamiPay detects root even MagiskHide enabled for it. Would you please share how to prevent HamiPay from detecting root? Thank you.
jekyll530 said:
Hi, just tried the latest v1.2.1, but it seems HamiPay detects root even MagiskHide enabled for it. Would you please share how to prevent HamiPay from detecting root? Thank you.
Click to expand...
Click to collapse
I think they changed the root detection, now it's can only use with iPASS, EasyCard or icash.
Creditcard function have been lock with rooted devices.
crazymika said:
I think they changed the root detection, now it's can only use with iPASS, EasyCard or icash.
Creditcard function have been lock with rooted devices.
Click to expand...
Click to collapse
Thank you for replying. The above seems work fine. Can this module be ported for OP5/T, 6/T (OOS 9.0) or even 7/Pro?
Cuvillier said:
Hello, any news ?
Click to expand...
Click to collapse
I've update to Pie rom, and confirm that we still can use sim NFC at it, just need some path adjustments, use the attached zip file replace your system/vendor/etc/libnfc-nxp.conf, put the SmartcardService folder in system/priv-app folder
add this line "persist.nfc.smartcard.config=SIM1,eSE1" in system/build.prop file, and should work as before.
I forgot how to make it into proper Magisk Module~the module i made tonight can't not be installed.... so strange. I'll update once i get it to work.
P.S.
I tried custom ROMs, they have many differences about NFC config, I can not get it to work even replace the framework and permission file, tried everything I know but still failed, maybe they missed something at more lower level.
updated for OOS Pie
I just found what's wrong.
Here's the updated Module for OOS Pie.
Later i'll update to Modules-Repo
jekyll530 said:
Thank you for replying. The above seems work fine. Can this module be ported for OP5/T, 6/T (OOS 9.0) or even 7/Pro?
Click to expand...
Click to collapse
@snowwolf725 have created the OP5 module, 6/6t have other method to make it working,but I need check some of it's file to make sure, op7 should work in theory, but it still depend on some rom configuration. I only have a op3t, do don't know how other models work.
Currently OOS have proper components (driver, config, frameworks...) installed, so it easier to enable them, for custom rom or future builds(which OP3 won't have)
I believe that require more adjustments to have this feature working.
crazymika said:
@snowwolf725 have created the OP5 module, 6/6t have other method to make it working,but I need check some of it's file to make sure, op7 should work in theory, but it still depend on some rom configuration. I only have a op3t, do don't know how other models work.
Currently OOS have proper components (driver, config, frameworks...) installed, so it easier to enable them, for custom rom or future builds(which OP3 won't have)
I believe that require more adjustments to have this feature working.
Click to expand...
Click to collapse
The OP5/T module is not available via Magisk download now. I'm currently using OP5 and will buy a 7 Pro. If you need, I can help testing.
crazymika said:
@snowwolf725 have created the OP5 module, 6/6t have other method to make it working,but I need check some of it's file to make sure, op7 should work in theory, but it still depend on some rom configuration. I only have a op3t, do don't know how other models work.
Currently OOS have proper components (driver, config, frameworks...) installed, so it easier to enable them, for custom rom or future builds(which OP3 won't have)
I believe that require more adjustments to have this feature working.
Click to expand...
Click to collapse
thanks but it doesn't work on lineage os 16. in logcat i get keymaster operation failed and unsupported digest on km1 hal issue. i hope you can fix it
regards
Hi guys. I managed to enable Dual Speaker Mod on OnePlus 3/3T on OxygenOS and Android 9 and 10.
Changelog:
v1.0
- First release for Pie
v2.0
- fixed for OxygenOS Pie
- support for custom Android 9 & 10
- Magisk Module
LINK (MIRROR): Google Drive
or Magisk Repo!
Installing:
1. Install module in Magisk Manager
2. Reboot and profit
Please test and report if you having issues here or on Telegram
Reserved
Thank you ! A Magisk module is possible ?
lutherkingmartin said:
Thank you ! A Magisk module is possible ?
Click to expand...
Click to collapse
Soon!
Sent from my OnePlus3T using XDA Labs
Tested it on latest havoc ROM with OP3. Sadly it doesn't work
mrfrantastic said:
Tested it on latest havoc ROM with OP3. Sadly it doesn't work
Click to expand...
Click to collapse
hello, yes doesn't work havoc os latest version. OP3T.
@mrfrantastic @acceslevel are you using another mods like Viper4Android, Dolby or both combined with AML?
For me is working even with Viper4Android installed.
Sent from my OnePlus3T using XDA Labs
IonutGherman said:
@[email protected] are you using another mods like Viper4Android, Dolby or both combined with AML?
For me is working even with Viper4Android installed.
Click to expand...
Click to collapse
Nope, none of them or anything audio related. Also no EdXposed.
Maybe someone else with OP3 can confirm my report.
IonutGherman said:
Hi guys. I managed to enable dual speaker mod on OnePlus 3T (didn't tested on OnePlus 3, but I think is working) with HavocOS 2.7 build 01.08.2019 and is working good. It should work with ROMs based on LineageOS, didn't tested on OxygenOS since LOS team changed some things in mixer_paths_tasha.xml.
Version 1.0
- first release for Pie
LINK (MIRROR): URL
Installing:
1. First backup your original mixer_paths_tasha.xml by renaming it to mixer_paths_tasha.xml.bak
2. Copy mixer_path_tasha.xml (modded one) to /system/vendor/etc
3. Reboot and profit
Please test and report if you having issues!
Magisk version coming soon!
Click to expand...
Click to collapse
In my custom rom already have this file ??? don't know why ( skydragon OS )
baba duy said:
In my custom rom already have this file ??? don't know why ( skydragon OS )
Click to expand...
Click to collapse
Replace mixer_paths_tasha.xml with the modded one.
Sent from my OnePlus3T using XDA Labs
IonutGherman said:
Replace mixer_paths_tasha.xml with the modded one.
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
i can't dowload it dead link
baba duy said:
i can't dowload it dead link
Click to expand...
Click to collapse
Try downloading from XDA
Sent from my OnePlus3T using XDA Labs
What are the lines you have changed/ added to the xml?
Ofcourse I can compare, but it would help me for making a script to modify the original xml without replacing it.
Hope you are willing to share your knowledge!
Not working on my OnePlus 3, any media won't play after replacing this with my original xml file.
One of my two sim cards also stopped working.
Workings on oneplus 3 with havoc latest version. Thanks
ShayantanS said:
Workings on oneplus 3 with havoc latest version. Thanks
Click to expand...
Click to collapse
I am also on latest HavocOs. Are you sure it's working?
mrfrantastic said:
I am also on latest HavocOs. Are you sure it's working?
Click to expand...
Click to collapse
Yes bro... 100%. I covered the bottom speaker to check and also brought the earpiece close to ears, it worked.
Only thing which I did was didn't do the .bak option and instead copied the original to main folder and replaced the original with modified one.
ShayantanS said:
Yes bro... 100%. I covered the bottom speaker to check and also brought the earpiece close to ears, it worked.
Only thing which I did was didn't do the .bak option and instead copied the original to main folder and replaced the original with modified one.
Click to expand...
Click to collapse
I used a different file explorer and now it works. I used Total Commander before, fyi.
mrfrantastic said:
I used a different file explorer and now it works. I used Total Commander before, fyi.
Click to expand...
Click to collapse
I will improve the script and will make a Magisk module, but now I don't have time because I work 2 jobs and I am all the time tired and not in the mood to script something.
Confirm that using a root file explorer application, any media content will fail to load, but using the TWRP inbuilt file manager it works just fine. Havoc 2.8
Thanks a lot!