I have the note 3 pro international version (kate) with an unlocked bootloader and recently I had an issue with the charging port module so I replaced it. After replacing it the system refused to boot, I tried to flash another rom and also tried reflashing the whole phone from EDL but I had no luck.
The phone charges normally with the new module.
Related
Hello,
i have redmi note 3 snapdragon variant. i had installed cyanogen mod 13 kenzo in my phone. for some reason i wnanted to get back to the stock version. so i flashed stock rom from twrp which resulted in boot loop.
i tried flashing rom again from mi flash in edl mode. but it still wont boot. mi logo comes and then power off. what can i do? please help.
I did the same thing I flashed MIUI from TWRP when using cyanogen mod ROM. But when I clicked on reboot to system after flashing the ROM which showed "done" it warned saying there is no OS to boot to and stayed at Mi logo. Thankfully I backed up the previous ROM before starting the procedure so, I went to recovery(TWRP) vol up+ pwr and had reset the phone and flashed that backed up file. It worked. So, my advise is try to go in to recovery re-flash any backed up file or any custom ROM.
check ur bl status bro
It's happened with me many times ...there is a no big issue I guess , just check if ur bl status is unlock or not ..I guess ur bootloader must be locked that's why this is happening to check just put ur phn is fastboot mode connect usb cable n type in adb n fastboot command
Fastboot devices
Then
Fastboot device oem-info
. If locked unlock it using mi unlock tool
I was trying to flash modified recovery image using magisk after that my phone is dead almost.
My phone don't boot in to android. I can't charge my phone because I get message on the beginning
my system is moddifyed my phone shut down automatically after 5 seconds, also i can't unlock bootloader via fastboot i get information "unlock operation is not allowed" .
I have Leeco 650x with mtk helio x27.
I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003
Is here any powerful person to solve the problem.
Other rather I soft bricked it and went into fast boot bootloop but somehow resolved it. Here's what happened:
I followed the instructions and unlocked my phone after seven days. I then proceeded to flash the India rom via fast boot (done this before on other xiaomi devices) as the current custom rom offerings aren't great and are buggy.
Then I think there was either a cable issue or a usb port issue (but I used the same usb port to flash other devices) which resulted in some error when doing fastboot (too many lines).
I then replaced the cable and tried again and it didn't let me flash the latest India rom (again my phone is unlocked and China set ie. Raphael). Telling me incorrect device etc. Not sure if this was the anti roll back issue or just again a cable issue.
I then tried to fastboot flash the china base rom but it failed repeatedly. Any attempt to switch off the phone results in me rebooting to the fastboot page.
Amazingly the computer detects the fastboot device but I'm unable to run any commands eg. Fastboot oem device info etc. It also now tells me that I have an incompatible device to Raphael!! So China set can't flash China rom....
With the last throw of the dice and almost concluding I now have a brick of a phone I decided to change usb port and tried flashing again the latest v15 China fastboot rom. After the third attempt there seemed to be progress... 200+ seconds later an error came up in the miflash tool and I thought here we go again.
To my surprise the phone actually rebooted which was why the error came up.
Thank God it booted and is now working but oh my God what an ordeal I had to go through.....
Sent from my ONEPLUS A3010 using Tapatalk
I Installed an android 10 custom rom called pixel exp..on my redmi 5 plus which was at android 8 . Everything was fine except my phone didn't charge.so i installed another custom rom but it was the same. So i went to Xiaomi fastboot tool and flashed stock rom but it stuck on mi logo. So i cant boot stock rom and when in custom rom , it only charges when my phone is in recovery mode.
What to do?
@sriram000
Force device to reboot normally
Code:
fastboot reboot
@jwoegerbauer
When to reboot using fastboot ? U mean when stuck at that mi logo
Redmi note 9 pro got hardly bricked after flashing Indonesian version stock rom.
Both the recovery and fastboot wasnt working.i tried to flash it through edl but authorization was an issue that didnt made me able to do it.
I sended the phn to a technician and he too failed to boot it properly.now it seems that the fastboot mode screen is appearing.
But the technician told me that he flashed it but couldn't fix it to boot the os..
My brothers phn ia made in india Redmi note 9 pro.but when i installed TWRP it was showing Redmi note 9S in twrp name.
Befor i flashed and booted android 12 pixel port beta 3 rom for device codename: Accidentally uninstalled Magisk and device got bootlooped.
After that i flashed oxygen os ported rom too.but it was again in bootloop .
I then tried to install stock rom in fastboot but there was version missmatch that i installed indonessian note 9 pro stock rom and it bricked hardly then.
O ya i remember i also installed a latest firmware before bricking..the device got bricked when i destroyed the fastboot by flashing wrong version rom.
Now the fastboot mode coming i didnt sure what did the technician with it..but as the fastboot mode is appearing it seems may b i can flash without edl authorization.
Any suggestions for me please?
I afraid of that definitely the technician know that how to easily flash as fastboot apperaing..but why he failed he didnt let me know