I tried rooting my phone now it will not get pass the loading screen. I tried to flash the stock ruu but I get errors
I have pictures but not aloud to post yet. But on my phone it says
Software status modified
Unlocked
S-on
.
When I try to flash the ruu zip I get
C:\Users\KJ\Desktop\platform-tools>fastboot flash zip rom.zip
target reported max download size of 800000000 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 2330284468 is not a multiple of
the block size 4096
sending sparse 'zip' 1/1 (0 KB)...
error: write_sparse_skip_chunk: don't care size 2330284468 is not a multiple of
the block size 4096
error: write_sparse_skip_chunk: don't care size 2330284468 is not a multiple of
the block size 4096
OKAY [ 1.065s]
writing 'zip' 1/1...
(bootloader) HOSD CL#695981
(bootloader) ERR lzipv1_init : Cannot read header len bytes
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_q
(bootloader) LrXHZ
FAILED (remote: 99 RU_UNKNOWN_FAIL terrible mishap )
finished. total time: 2.142s
Bump
Hey Guys,
i'm having a big Problem. I hard bricked a OP x.
I think there is a problem with the partitions.
I can flash recoverys. I can't flash or wipe anything in TWRP because "Failed to mount '/system' (invalid argument)".
And flashing stock OOS via fastboot is not working too.
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 280657212 is not a multiple of the block size 4096
erasing 'system'...
OKAY [ 0.172s]
sending sparse 'system' 1/2 (524284 KB)...
error: write_sparse_skip_chunk: don't care size 280657212 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 280657212 is not a multiple of the block size 4096
OKAY [ 16.890s]
writing 'system' 1/2...
FAILED (remote: buffer overreads occured due to invalid sparse header)
finished. total time: 23.014s
Any way to get it working again?
cat /proc/partitions
echoes an empty list :/
=> Mega Unbrick Guide
It's try install adb with Stock Rom and not completed, may be have some problem. Can you tell me how to dissolve?
unknown partition 'tz.img\tz.img'
error: cannot determine image filename for 'tz.img\tz.img'
target reported max download size of 268435456 bytes
Invalid sparse file format at header magi
erasing 'system'...
OKAY [ 1.408s]
Thank you.
Hi, my phone is P8 LİTE 2017 (PRA-LX1 ) . I bl unlocked and install twrp and magisk, its not have any problem. so ı install xposed framework in xposed apk. my phone shutdown and not open, always bootloop. I wiped data, system, and dalvik cache. I cant install custom rom for fastboot. maybe my partition is broken, İts my error;
target reported max download size of 471859200 bytes
error: write_sparse_skip_chunk: don't care size 955813115 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 391523579 is not a multiple of the block size 4096
sending sparse 'system' (434338 KB)...
error: write_sparse_skip_chunk: don't care size 955813115 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 955813115 is not a multiple of the block size 4096
OKAY [ 19.776s]
writing 'system'...
FAILED (remote: sparse flash write failure)
finished. total time: 31.103s
@enesyksel
If you can access the phone via fastboot you could flash phone's Stock ROM in order to get phone working again.
Hi all, i wanted to remove my RR Rom, which was draining a lot battery.
But when i downloaded a new rom (Paranoid Android) and followed the fastboot commands i encounted an error.
7T PRO\payload_dumper-win64\payload_output> fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magi
So i tried to revert back to stock with this tutorial ( https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424 )
But now i am getting these errors:
error: failed to load 'images.zip': No such file or directory
Press any key to exit...
But the images.zip is there , i can see it.
Also when i try other flash ables .bat files:
Do you want to wipe all the data ( Reccomended )[Y/N]?y
Creating filesystem with parameters:
Size: 232382812160
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 56734085
Block groups: 1732
Reserved block group size: 1024
Created filesystem with 11/14188544 inodes and 938604/56734085 blocks
target reported max download size of 805306368 bytes
Erase successful, but not automatically formatting.
Can't determine partition type.
FAILED (remote: GetVar Variable Not found)
erasing 'userdata'...
OKAY [ 0.688s]
sending 'userdata' (152025 KB)...
OKAY [ 3.224s]
writing 'userdata'...
OKAY [ 0.003s]
erasing 'cache'...
FAILED (remote: Check device console.)
finished. total time: 7.236s
error: cannot load 'aop.img'
error: cannot load 'aop.img'
error: cannot load 'bluetooth.img'
error: cannot load 'bluetooth.img'
error: cannot load 'boot.img'
error: cannot load 'boot.img'
error: cannot load 'dsp.img'
error: cannot load 'dsp.img'
error: cannot load 'dtbo.img'
error: cannot load 'dtbo.img'
error: cannot load 'modem.img'
error: cannot load 'modem.img'
error: cannot load 'oem_stanvbk.img'
error: cannot load 'qupfw.img'
error: cannot load 'qupfw.img'
error: cannot load 'storsec.img'
error: cannot load 'storsec.img'
"Invalid sparse file format at header magic" is not an error you need only to wait
error: cannot load 'system.img'
"Invalid sparse file format at header magic" is not an error you need only to wait
error: cannot load 'system.img'
error: cannot load 'vbmeta.img'
error: cannot load 'vbmeta.img'
"Invalid sparse file format at header magic" is not an error you need only to wait
error: cannot load 'vendor.img'
"Invalid sparse file format at header magic" is not an error you need only to wait
error: cannot load 'vendor.img'
error: cannot load 'LOGO.img'
error: cannot load 'LOGO.img'
Press any key to continue . . .
I also tried to install TRWP and go from there, but then i get this error:
PS C:\Users\Raseven\Desktop\7T PRO> fastboot flash recovery_a twrp.img
target reported max download size of 805306368 bytes
sending 'recovery_a' (41796 KB)...
OKAY [ 0.899s]
writing 'recovery_a'...
OKAY [ 0.169s]
finished. total time: 1.073s
PS C:\Users\Raseven\Desktop\7T PRO> fastboot flash recovery_b twrp.img
target reported max download size of 805306368 bytes
sending 'recovery_b' (41796 KB)...
OKAY [ 0.900s]
writing 'recovery_b'...
OKAY [ 0.135s]
finished. total time: 1.039s
PS C:\Users\Raseven\Desktop\7T PRO> fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.900s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.928s
PS C:\Users\Raseven\Desktop\7T PRO>
Is my phone bricked or ??
From OB8-OnePlus7ProOxygen_13.W.21_OTA_021_all_1912261255_76782007d7dbec-FASTBOOT i tried flash-all bat file :
--------------------------------------------
Bootloader Version...:
Baseband Version.....:
Serial Number........: bf29c267
--------------------------------------------
extracting android-info.txt (0 MB) to RAM...
android-info.txt syntax error: require product=msmnile
Setting current slot to 'b' OKAY [ 0.003s]
extracting boot.img (96 MB) to disk... took 0.273s
archive does not contain 'boot.sig'
Sending 'boot_b' (98304 KB) OKAY [ 2.154s]
Writing 'boot_b' OKAY [ 0.372s]
extracting dtbo.img (16 MB) to disk... took 0.042s
archive does not contain 'dtbo.sig'
Sending 'dtbo' (16384 KB) OKAY [ 0.366s]
Writing 'dtbo' OKAY [ 0.047s]
archive does not contain 'dt.img'
archive does not contain 'recovery.img'
extracting vbmeta.img (0 MB) to disk... took 0.001s
archive does not contain 'vbmeta.sig'
Sending 'vbmeta' (8 KB) OKAY [ 0.015s]
Writing 'vbmeta' OKAY [ 0.003s]
archive does not contain 'vbmeta_system.img'
archive does not contain 'super_empty.img'
archive does not contain 'boot_other.img'
extracting odm.img (100 MB) to disk... took 0.197s
archive does not contain 'odm.sig'
Sending 'odm' (102400 KB) OKAY [ 2.203s]
Writing 'odm' FAILED (remote: '(odm_b) No such partition')
fastboot: error: Command failed
Press any key to exit...
And another:
extracting android-info.txt (0 MB) to RAM...
extracting boot.img (96 MB) to disk... took 0.292s
target reported max download size of 805306368 bytes
archive does not contain 'boot.sig'
archive does not contain 'boot_other.img'
extracting dtbo.img (16 MB) to disk... took 0.043s
archive does not contain 'dtbo.sig'
archive does not contain 'dt.img'
archive does not contain 'recovery.img'
extracting system.img (3472 MB) to disk... took 13.269s
Invalid sparse file format at header magic
archive does not contain 'system.sig'
archive does not contain 'system_other.img'
extracting vbmeta.img (0 MB) to disk... took -0.000s
archive does not contain 'vbmeta.sig'
extracting vendor.img (1024 MB) to disk... took 3.842s
Invalid sparse file format at header magic
archive does not contain 'vendor.sig'
archive does not contain 'vendor_other.img'
wiping userdata...
mke2fs 1.43.3 (04-Sep-2016)
Creating filesystem with 56734085 4k blocks and 14188544 inodes
Filesystem UUID: 7645ccf6-e8b0-11ea-a92e-2fe9f70f7b34
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Allocating group tables: done
Writing inode tables: done
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information: done
--------------------------------------------
Bootloader Version...:
Baseband Version.....:
Serial Number........: bf29c267
--------------------------------------------
sending 'boot_b' (98304 KB)...
OKAY [ 2.129s]
writing 'boot_b'...
OKAY [ 0.317s]
sending 'dtbo' (16384 KB)...
OKAY [ 0.361s]
writing 'dtbo'...
OKAY [ 0.069s]
sending sparse 'system' 1/5 (779514 KB)...
Ok i seemed to have fixed it, using the MSM Tool So admin u can lock this.