A few days ago i installed remix os to my 40gb hdd (not primary hdd) via a hard drive case that puts ide through usb. After i installed remix, i booted back into windows and used rmx tools to expand my data partition to 34gb and then i went back to remix and everything worked fine. i installed google services and rebooted a few times and everything was still working. then, to get better performance out of it, i plugged the 40gb hdd back into my motherboard via the ide cable. Now whenever i try to boot into remix again it gets stuck on "detecting android-x86" and won't do anything else. The hard drive status light also stops. I've tried plugging my install usb into the computer when it gets stuck but that does nothing. Any help? my specs are
Intel core 2 duo @2.8
ati radeon 4760 gpu
asus p5ql mobo
250gb hdd (primary)
40gb hdd formatted in ntfs (so i could have 34gb of data)
Seems like it can't read the data partition or something, I don't know how you installed this but maybe you should get a linux distro running first, that makes it so much easier to manage Remix OS see http://forum.xda-developers.com/rem...buntu-mint-t3311865/post65243289#post65243289 for example
You can also try to add the boot option DATA_IN_MEM=1 to see if it boots up
TerrorToetje said:
Seems like it can't read the data partition or something, I don't know how you installed this but maybe you should get a linux distro running first, that makes it so much easier to manage Remix OS see http://forum.xda-developers.com/rem...buntu-mint-t3311865/post65243289#post65243289 for example
You can also try to add the boot option DATA_IN_MEM=1 to see if it boots up
Click to expand...
Click to collapse
I installed it from a 16gb flash drive to the hard drive. Where do I add that boot option?
I have installed stable lineage OS 14.1 on my PC. but before the last logo of the is shown it says (Detecting Android-x68.................................................... found at /dev/sdb3)
console:/#(...........................................)
I don't know what to write after (console:/#)
Can anyone help me with this.
I appreciate that...
Hi I have a laptop running Remix os and it's only OS installed to the hard drive using all space for the android.
It is simple to do if you are interested.
Take the USB you made, Clone the usb drive using something like minitool partition wizard to a hard drive with no partitions on it. Copy using option 1:1 no resize.
put hard drive in a compatible machine.
turn on PC, enjoy
As the title said, my laptop was very old and running Windows very slow. So I want to use RemixOS to replace my Windows.
Is thaa possible?
ryo2456 said:
As the title said, my laptop was very old and running Windows very slow. So I want to use RemixOS to replace my Windows.
Is thaa possible?
Click to expand...
Click to collapse
hi it is posible and i bet there is a easy way im to stupid to find so here is what i did take a old empty hdd and the biggest usb stick u have (not bigger than the hdd) download the remix os install it on the usb stick like normaly then kill the partition on the hard disk using minitool partition wizard (freeware) [aply changes] then tell it to clone the partitions of the usb stick to the hdd u want to use and select no rezising of partitions aply again , shutdown , plug hdd into laptop and done schould install like normal on usb youst from internal [later u can partition the remaining space on the hdd into nice 32gb pices so the os can read them and have unlimited space i bet there is a easyer way but that worked for me whit the 64 bit version and a crappy intel atom office system whitout uefi boot if someone has a more simple way please let me know ^^ also is there a way to turn of guest mode querry so it automaticly boots into residental mode ?
DataFlo said:
hi it is posible and i bet there is a easy way im to stupid to find so here is what i did take a old empty hdd and the biggest usb stick u have (not bigger than the hdd) download the remix os install it on the usb stick like normaly then kill the partition on the hard disk using minitool partition wizard (freeware) [aply changes] then tell it to clone the partitions of the usb stick to the hdd u want to use and select no rezising of partitions aply again , shutdown , plug hdd into laptop and done schould install like normal on usb youst from internal [later u can partition the remaining space on the hdd into nice 32gb pices so the os can read them and have unlimited space i bet there is a easyer way but that worked for me whit the 64 bit version and a crappy intel atom office system whitout uefi boot if someone has a more simple way please let me know ^^ also is there a way to turn of guest mode querry so it automaticly boots into residental mode ?
Click to expand...
Click to collapse
I mean:
1. Install on USB
2. Format the partition on HDD
3. Clone the USB to HDD
right?
I success to replace my Windows with RemixOS.
But how can I use the full partition of my HDD?
Installation of Remix OS on hard disk using all storage
Have a look at "How to install Remix OS to hard disk".
easy,it is like install it on VMware.
just create a boot able USB
boot from it.
then on boot press tab and enter quiet INSTALL=1 DEBUG=
if I remember correctly.
this will start the stand alone hdd formating tool and installation wizard.
this is very easy and you find tons of videos about it on YouTube.
https://www.youtube.com/watch?v=XVGmcBAasoo
This is a working usb install media creator method for remix os installation and legacy bios + MBR format and not GPT and circumventing all known errors made for noobs including USING full drive internal storage space etc.
You will be able to use this usb stick for future creation of other usb install media
you will have the choice to also install to hard drive
you will need 2 x usb drives and require drive write speed to be higher than 10 mb/s
the first drive will be the installer drive and the second will be the actual usb drive used to run remix os.
For first installer drive it will be basic fat 32 install. you will need rufus usb boot media creator
after creation of the installer drive keep it safe i reccommend you use a 4gb drive $4/£2 off ebay but get something thats got a write speed higher than 10 mb/s or else install will fail!
Format the second drive with the size of your choice to ext 4 on your pc with minitool partition or acronis disk manager (make sure the drive is formatted as primary and set to active flag)
1. Create fat 32 usb boot disk with first usb drive and rufus usb boot media creator and the remix os iso version 2.0402
2.make sure after creation you boot up the usb drive and enter remix os then shutdown and boot up again to write the config files
3.make sure you dont boot up the ufi version of the boot up, only use the legacy version (it will have ufi next to boot drive in bios usb boot up list)
4.after you enter remix os go to settings and download the update (ota) (this is the main fix for version 2.0402 which updates to version 2.0403)(if this update fails you cannot proceed further with instructions unless you have version 2.0403 iso)( this update DOSENT APPLY TO REMIX OS version 2.0403 or 3.0+ INSTALLATION)
5. After ota update reboot and enter remix os again and let android upgrade
6.after this stage is complete your fat32 remix os usb bootable drive is ready to create a usb drive that runs remix os from the drive itself using full drive internal storage space.
7.insert the second drive in a usb hub and boot up the computer with both drives in the computer and boot from the first drive (the usb remix os installer drive)
8.boot up and at the grub boot menu (it should look blue with yellow writing not the black ufi version) press tab and type: INSTALL=1
9. then press enter then you will enter usb media creation menu select scan usb drives and select the second drive (the remix os running drive)
10. It will ask you what you want to format the drive as so select do not format option (becus you already formatted it)
11.then it will ask you to install first grub boot menu say yes
12. Then it will ask you to install second boot grub efi menu say yes
13. Next it will ask you if you want to format the boot partition or something like that say *** no ***
14. Then it will ask you if you want read/write privelage say yes
15. It will proceed to write the remix os onto the drive
16. When finished it will ask to restart (at this point i just switch the pc off by holding power button then restart and boot off the new second drive to run the os from it already upgraded too)
**** Newbie Errors to avoid******
1. make sure you format the drive correctly, sometimes errors at this stage will create errors later on and affect later installation and will create boot up failures
2. i have to stress this once again as once i formatted the same drive with the same settings in minitool partition manager but in different order for example: instead of formatting it ext 4 then applying changes then setting it to primary then applying changes then setting the partition to active flag and applying changes, i did format ext 4 and change partition to primary all at once then applied changes then set it to active flag and applied changes and later after remix os install the usb wouldnt boot saying "missing operating system error" so caution.
3. after you format the drive with ext 4 partition the usb drive will be unrecognizable in windows. (do not use windows unplug usb drive feature to remove the drive, just pull it out)
4. make sure you pull the first installer drive out before booting the newly created ext 4 usb as it may affect boot up
5. sometimes for power saving reasons the screen might go blank while installing as installing takes time dont panic just press power button or any key to revive the system
6. if you dont get a usb drive faster than 10 mb/s then you will have problems if you continue with the installation and alot of system lag
7. its happened to me many times before so listen carefully: if you dont format the drive correctly even the drives transfer write speed can be greatly affected for example i formatted the usb drive and made a mistake but it was not detectable as it said all was fine i think i formatted the usb drive fat32 without first deleating the existing partition (just converted it) then with remix os installation at the stage where you boot up the installed drive for the first time to do a drive write speed test it was telling me the drives speed was below 5 mb/s ( the drive was a lexar p23 usb 3.0 16gb 150 mb/s read 60 mb/s write) and warned me about install failure then i formatted the drive again this time deleting the patition first then applying changes and doing the rest of the steps one by one each time applying changes after only changing one setting then at the remix os installation speed test this time it was reporting 60 mb/s write speeds!
8. remix os works like a charm on intel cpus and intel integrated gpus and i dont have other makes to test so this tutorial is only for legacy bios and intel cpu and gpu (tested all working)
9. This is something so basic but having a data indicator led on your usb drive or usb hub will save you waiting hours! most waiting is due to not knowing whats happening or not knowing if there is an error or not so try and get a usb drive with an led that tells you if the system is currently writing/working to disk and when that led stops blinking for a long period e.g 2 mins then you will know the install has crashed or android is not loading. Also with slower drives the waiting period is longer as the system takes longer to write to the drive (a 544MB/s msata SSD FLASH drive takes 5 secs to install while a usb 3.0, 60 MB/s write drive will take 15 mins) but if you have a data status led which shows its still blinking then atleast you will know the installation/loading is still working and no need to abort it. Also Android os constantly writes to the drive when running so you will see the data status led constantly blink too and if that ever stops you know you have encountered a system crash. Also the led shows how well remix os is running as regards speed of the operating system, for example at the start of loading remix os or when doing a task the led stays constanly blinking RAPIDLY but after loading or finishing the task the led defaults to a blink per second (this is classed as normal operation and healthy) but when the led is constantly blinking RAPIDLY without pauses or stays on for a long time then it means the operating system is not running smoothly as it should and then you should check if theres a problem formatting or if its a fake drive etc.
10. Using slow usb drives or fake usb drives will get very HOT and will cause the error "not responding...wait or close" error while very fast drives will always stay COOL without system lag and errors.
note: If wanting ntfs version of remix os then its a little complicated than this and you will need to use imgtools to increase the data.img file on the ntfs drive after creation with the first usb media creator drive.
The remix os ota update 2.0403 addresses the boot media creation errors of remix os 2.0402 . After the ota update all drives created with the grub menu installer boot up as they should but only ufi boot up option hangs!
Hope this helps hit the thanks dont forget so i know how many people were helped by this! enjoy.
I have the ativ pc pro xe700t1c the uk version with intel core i5 quad core and its also a convertible tablet with msata ssd as hdd drive and as you all probbaly know android was created for fast flash memory and linux format os so the best combination is an ssd and ext4 linux file format. I have a 64gb 544 mb/s msata drive in a usb 3.0 enclosure which i use to boot remix os and run it off it. Its perfectly smooth and fast enough 5 secs to boot and the ativ pc pro convertible laptop/tablet is fully compatible hadware software wise, no problems at all. The 5 year old Ativ pc pro gets 123,000+ score in antutu benchmark same as the latest LG G5 with the latest adreno 530 gpu/snapdragon 820 cpu which costs approx £600 now in retail!!! I bought the Ativ pc pro convertible laptop/tablet for only £200 two weeks ago with accessories (ethernet dock etc) worth alone £100 on its own off ebay!!! On top of all that its also a windows 10 pro convertible laptop/tablet system which on its own without android was initially worth £1200 five years ago and still costing approx £500 even now in retail. So what im trying to say here is that for only £200 i get a £600 android 6.0 laptop/tablet and i also get a £500 windows 10 pro laptop tablet ALL IN ONE. Muahahahahahaha haaaaa hahahaha kekekeke.
http://www.ebay.co.uk/itm/Brand-New...549634?hash=item33bcb8a542:g:UFYAAOSwQItUFG7S ( 128GB Msata SSD 544 MB/s read write )
http://www.ebay.co.uk/itm/231736235624?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT ( USB 3.0 Msata enclosure )
alz_uk said:
This is a working usb install media creator method for remix os installation and legacy bios circumventing all known errors made for noobs including USING full drive internal storage space etc.
You will be able to use this usb stick for future creation of other usb install media
you will have the choice to also install to hard drive
you will need 2 x usb drives and require drive write speed to be higher than 10 mb/s
the first drive will be the installer drive and the second will be the actual usb drive used to run remix os.
For first installer drive it will be basic fat 32 install. you will need rufus usb boot media creator
after creation of the installer drive keep it safe i reccommend you use a 4gb drive $4/£2 off ebay but get something thats got a write speed higher than 10 mb/s or else install will fail!
Format the second drive with the size of your choice to ext 4 on your pc with minitool partition or acronis disk manager (make sure the drive is formatted as primary and set to active flag)
1. Create fat 32 usb boot disk with first usb drive and rufus usb boot media creator and the remix os iso
2.make sure after creation you boot up the usb drive and enter remix os then shutdown and boot up again to write the config files
3.make sure you dont boot up the ufi version of the boot up, only use the legacy version (it will have ufi next to boot drive in bios usb boot up list)
4.after you enter remix os go to settings and download the update (ota) (this is the main fix for version 2.0402 which updates to version 2.0203)(if this update fails you cannot proceed further with instructions unless you have version 2.0403 iso)(DOSENT APPLY TO REMIX OS version 2.0204 or 3.0+ INSTALLATION)
5. After ota update reboot and enter remix os again and let android upgrade
6.after this stage is complete your fat32 remix os usb bootable drive is ready to create a usb drive that runs remix os from the drive itself using full drive internal storage space.
7.insert the second drive in a usb hub and boot up the computer with both drives in the computer and boot from the first drive (the usb remix os installer drive)
8.boot up and at the grub boot menu (it should look blue with yellow writing not the black ufi version) press tab and type: INSTALL=1
9. then press enter then you will enter usb media creation menu select scan usb drives and select the second drive (the remix os running drive)
10. It will ask you what you want to format the drive as so select do not format option (becus you already formatted it)
11.then it will ask you to install first grub boot menu say yes
12. Then it will ask you to install second boot grub efi menu say yes
13. Next it will ask you if you want to format the boot partition or something like that say *** no ***
14. Then it will ask you if you want read/write privelage say yes
15. It will proceed to write the remix os onto the drive
16. When finished it will ask to restart (at this point i just switch the pc off by holding power button then restart and boot off the new second drive to run the os from it already upgraded too)
**** Newbie Errors to avoid******
1. make sure you format the drive correctly, sometimes errors at this stage will create errors later on and affect later installation and will create boot up failures
2. i have to stress this once again as once i formatted the same drive with the same settings in minitool partition manager but in different order for example: instead of formatting it ext 4 then applying changes then setting it to primary then applying changes then setting the partition to active flag and applying changes, i did format ext 4 and change partition to primary all at once then applied changes then set it to active flag and applied changes and later after remix os install the usb wouldnt boot saying "missing operating system error" so caution.
3. after you format the drive with ext 4 partition the usb drive will be unrecognizable in windows. (do not use windows unplug usb drive feature to remove the drive, just pull it out)
4. make sure you pull the first installer drive out before booting the newly created ext 4 usb as it may affect boot up
5. sometimes for power saving reasons the screen might go blank while installing as installing takes time dont panic just press power button or any key to revive the system
6. if you dont get a usb drive faster than 10 mb/s then you will have problems if you continue with the installation and alot of system lag
7. its happened to me many times before so listen carefully: if you dont format the drive correctly even the drives transfer write speed can be greatly affected for example i formatted the usb drive and made a mistake but it was not detectable as it said all was fine i think i formatted the usb drive ext 4 without first deleating the existing partition (just converted it) then with remix os installation at the stage where you boot up the installed drive for the first time to do a drive write speed test it was telling me the drives speed was below 5 mb/s ( the drive was a lexar p23 usb 3.0 16gb 150 mb/s read 60 mb/s write) and warned me about install failure then i formatted the drive again this time deleting the patition first then applying changes and doing the rest of the steps one by one each time applying changes after only changing one setting then at the remix os installation speed test this time it was reporting 60 mb/s write speeds!
8. remix os works like a charm on intel cpus and intel integrated gpus and i dont have other makes to test so this tutorial is only for legacy bios and intel cpu and gpu (tested all working)
9. This is something so basic but having a data indicator led on your usb drive or usb hub will save you waiting hours! most waiting is due to not knowing whats happening or not knowing if there is an error or not so try and get a usb drive with an led that tells you if the system is currently writing/working to disk and when that led stops blinking for a long period e.g 2 mins then you will know the install has crashed or android is not loading. Also with slower drives the waiting period is longer as the system takes longer to write to the drive (a 544MB/s msata SSD FLASH drive takes 5 secs to install while a usb 3.0, 60 MB/s write drive will take 15 mins) but if you have a data status led which shows its still blinking then atleast you will know the installation/loading is still working and no need to abort it. Also Android os constantly writes to the drive when running so you will see the data status led constantly blink too and if that ever stops you know you have encountered a system crash. Also if the the led shows how well remix os is running as regards speed of the operating system, for example at the start of loading remix os or when doing a task the led stays constanly blinking RAPIDLY but after loading or finishing the task the led defaults to a blink per second (this is classed as normal operation and healthy) but when the led is constantly blinking RAPIDLY without pauses or stays on for a long time then it means the operating system is not running smoothly as it should and then you should check if theres a problem formatting or if its a fake drive etc.
10. Using slow usb drives or fake usb drives will get very HOT and will cause the error "not responding...wait or close" error while very fast drives will always stay COOL without system lag and errors.
note: If wanting ntfs version of remix os then its a little complicated than this and you will need to use imgtools to increase the data.img file on the ntfs drive after creation with the first usb media creator drive.
The remix os ota update 2.0403 addresses the boot media creation errors of remix os 2.0203 . After the ota update all drives created with the grub menu installer boot up as they should but only ufi boot up option hangs!
Hope this helps hit the thanks dont forget so i know how many people were helped by this! enjoy.
I have the ativ pc pro xe700t1c the uk version with intel core i5 quad core and its also a convertible tablet with msata ssd as hdd drive and as you all probbaly know android was created for fast flash memory and linux format os so the best combination is an ssd and ext4 linux file format. I have a 64gb 544 mb/s msata drive in a usb 3.0 enclosure which i use to boot remix os and run it off it. Its perfectly smooth and fast enough 5 secs to boot and the ativ pc pro convertible laptop/tablet is fully compatible hadware software wise, no problems at all. The 5 year old Ativ pc pro gets 120,000+ score in antutu benchmark same as the latest LG G5 with the latest adreno 530 gpu/snapdragon 820 cpu which costs approx £600 now in retail!!! I bought the Ativ pc pro convertible laptop/tablet for only £200 two weeks ago with accessories (ethernet dock etc) worth alone £100 on its own off ebay!!! On top of all that its also a windows 10 pro convertible laptop/tablet system which on its own without android was initially worth £1200 five years ago and still costing approx £500 even now in retail. So what im trying to say here is that for only £200 i get a £600 android 6.0 laptop/tablet and i also get a £500 windows 10 pro laptop tablet ALL IN ONE. Muahahahahahaha haaaaa hahahaha kekekeke.
http://www.ebay.co.uk/itm/Brand-New...549634?hash=item33bcb8a542:g:UFYAAOSwQItUFG7S ( 128GB Msata SSD 544 MB/s read write )
http://www.ebay.co.uk/itm/231736235624?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT ( USB 3.0 Msata enclosure )
Click to expand...
Click to collapse
Hey, thanks for the instructions. I managed to use this method to install Remix OS 3.0.102 onto the seconds USB drive on my Macbook Pro. Once the installation process finished I hit Run Android_x86 instead of reboot and it started just fine. The problem is that after I removed the first USB drive with the Remix OS installer and I rebooted the second drive doesn't show up as a boot option. So now I can't get back into it.
Any suggestions?
Thanks,
Daniel
phantasma2983 said:
Hey, thanks for the instructions. I managed to use this method to install Remix OS 3.0.102 onto the seconds USB drive on my Macbook Pro. Once the installation process finished I hit Run Android_x86 instead of reboot and it started just fine. The problem is that after I removed the first USB drive with the Remix OS installer and I rebooted the second drive doesn't show up as a boot option. So now I can't get back into it.
Any suggestions?
Thanks,
Daniel
Click to expand...
Click to collapse
you did the last proccess wrong! you need to follow step 16 properly! It tells you not to run android x86 option or restart option, infact it tells you to switch your pc off then remove the first installer drive then start the pc with the second drive and boot from it. If you run android x86 option at the end it will run but make next boot broken. Please follow instructions carefully.
if you didnt backup your files then you can still boot from it but the boot might not stick unless you reinstall remix os onto the drive again.
do steps 7 to 13 again to the second drive and when you get to step 14 "do you want to write privelage" part just switch the pc off and boot from the second drive again and this time boot should be fixed but might not boot again after that like i said before.
I tried multiple variations and I end up with 2 outcomes (always shut the computer down once the last options was on screen):
1) If I don't tell it to format on step 13 (like in the instructions) I end up not seeing the USB drive as a boot option after restart.
2) If I tell it to format on step 13 I see the USB and I can select it but then I get the Minimal Bash Grub instead of it booting
P.S. I'm doing this with the latest version of Remix OS 3.0.102 on a 2015 Macbook Pro. Have you tested the instructions on a Mac or only a Windows PC?
phantasma2983 said:
I tried multiple variations and I end up with 2 outcomes (always shut the computer down once the last options was on screen):
1) If I don't tell it to format on step 13 (like in the instructions) I end up not seeing the USB drive as a boot option after restart.
2) If I tell it to format on step 13 I see the USB and I can select it but then I get the Minimal Bash Grub instead of it booting
P.S. I'm doing this with the latest version of Remix OS 3.0.102 on a 2015 Macbook Pro. Have you tested the instructions on a Mac or only a Windows PC?
Click to expand...
Click to collapse
All i can say my freind is there are too many numerous variables that can go wrong. all the way from having the correct bios setup and correct boot mode eg legacy or eufi to formatting the drive correctly and using the already complicated and buggered up installer. you just have to trial and error like i did and after a few days i got it all sussed for my pcs (not macs though sorry, not a mac person never was and never will be lol).
the method i have written works 100% for legacy bios and mbr hard disk (not gpt), windows, fast flash drive and for all versions of remix os upto date so far. ive tried it on different flash drives too.
This has to be mentioned , there is alot that jide is doing to prevent users from doing things like what we are doing here now so they are always changing things to make it harder for people to have it their own way! jides way is making money from the masses while our way is a free os! clearly jide will carry on trying to prevent people like us from doing what we want to do such as using full drive internal storage space etc etc. so watch out folks!
Thanks for the answer. I'll just keep trying until I get it to work. There must be way, even if it means learning how to configure grub manually from scratch. It worked just fine on first install until reboot so it has to work somehow.
It would've been nice if Jide provided more info or support on the issue since this is suppose to be a final product. The purpose of free products is to attract attention to other paid products and to their company. That, they have achieved but if said free product is a hacky nightmare full of bugs and lacking documentation it only puts them in a negative light. Then again, in my case this might also be Apple's fault with their closed platform approach and lack of support for certain file systems and standards.
Anyway, have a good night and all the best.
If I manage to get it working I'll be sure to post it here.
i use Unetbootin to install android-x86 or remixos to hdd or usb, easy
Sent from my AOD255 using XDA-Developers mobile app
wizmart said:
i use Unetbootin to install android-x86 or remixos to hdd or usb, easy
Sent from my AOD255 using XDA-Developers mobile app
Click to expand...
Click to collapse
To my understanding the only way to have Remix OS use the entire space of the USB drive is to have it formatted as ext4. Unetbootin cannot use an ext4 formatted drive so yes, I can have it work in multiple ways either using unetbootin or just dd-ing the image to the drive but in both cases I end up with a 4gb storage space in Remix OS. That is why this method seemed like the best one.
hmm..
Yumi also supports android x86 (easyway to make usb stick) and change grub menu
The android installer from XDA hacked version.. seems to create 3 partitions on the USB stick (fat32/ext4/ext4)
-for those how just wish to use a big usbstick.. to run RemixOS (note removing the partitions can not be done with diskmanager from windowz)
any note.. i have on this tuturial... missing: is what if you have nvidia card
then it needs : i915.modeset=0 nouveau.modeset=1 INSTALL=1
Cheers..
phantasma2983 said:
To my understanding the only way to have Remix OS use the entire space of the USB drive is to have it formatted as ext4. Unetbootin cannot use an ext4 formatted drive so yes, I can have it work in multiple ways either using unetbootin or just dd-ing the image to the drive but in both cases I end up with a 4gb storage space in Remix OS. That is why this method seemed like the best one.
Click to expand...
Click to collapse
try and use this windows app to create usb boot disk, it supports uefi bios and legacy bios + 64 bit/32 bit iso and img files. And your right only ext 4 allows full drive internal storage space without modification of any sort out of the box. With NTFS you need to use imgtools to increase the internal storage space.
http://forum.xda-developers.com/android/software/winapp-android-x86-installer-uefi-t3222483
unetbootin can use an ext4 if you use it from linux(ubuntu), from windows you install first to hd on reboot inside unetbootin menu you add INSTALL=1 on your entry then choose usb ext4 on drive choice thats how i do
Sent from my AOD255 using XDA-Developers mobile app
Worked great!
Followed your instructions and loaded Remix OS " Remix_OS_for_PC_Android_M_64bit_B2016091202" version: 3.0.205 onto a Sandisk 128GB USB drive with no problems and full access to entire drive. Using the Remix OS installer only gave 64 GB of Data.
Thank you so much for the guide!
Hi folks
I have a 64bit hp chromebox that has 4gb of ram that I was using as a standalone for openeleq. I switched that to win 10 which ran pretty much perfect with a Bluetooth speaker attached. I have since come across remix os which I ran alongside win 10 on a separate partition that worked fine also. What I want to know is can I install remix os directly to my chromebox ssd as s standalone os that just boots directly into remix os with no windows or anything. I have purchased a little external enclosure for the m2 ssd and had it hooked to my pc last night. I formatted it to fat 32 then ran the remix os install tool and installed it to hard drive (my chromebox ssd). Anyway after install I slipped it back into my chromebox but it won't boot. I get an error at the seabios screen telling me it is unable to read hard disk. Will this be possible to do if so can someone help please. Thankyou
*****update solved*****
Been hacking away at it today and I have found a solution. Plug in your ssd via external enclosure to your pc and format to ntfs. Then downloaded pendrive Linux (universal USB installer) and choose the bottom option (try unlisted Linux iso). Load up the Remix os for pc iso and write it to the ssd. Put the ssd back in the chromebox and it will boot straight into Remix os.
Note: If you are doing it from a fresh chromebox still running chrome os on it then it needs to be flashed first to a custom bios. I have option 6 on mine standalone custom core firmware.
The Kodi E-Z setup script will do this.
Just Google it and follow the instructions.
Remix os will allocate 8gb of internal space regardless of the ssd size when using ntfs. Just load up Remix os on your chromebox and follow the install till you get to the desktop screen then shut it down. Then just remove the ssd from your chromebox and put it back into the enclosure and connect it back to your pc. Just Google increase Remix os internal storage and there is a simple tutorial on how to do this. Mine is 48gb ?. Sorry for not posting links I did try but as I am a newbie I wasn't allowed.
Hope this helps anyone.
sajdjfb said:
Hi folks
I have a 64bit hp chromebox that has 4gb of ram that I was using as a standalone for openeleq. I switched that to win 10 which ran pretty much perfect with a Bluetooth speaker attached. I have since come across remix os which I ran alongside win 10 on a separate partition that worked fine also. What I want to know is can I install remix os directly to my chromebox ssd as s standalone os that just boots directly into remix os with no windows or anything. I have purchased a little external enclosure for the m2 ssd and had it hooked to my pc last night. I formatted it to fat 32 then ran the remix os install tool and installed it to hard drive (my chromebox ssd). Anyway after install I slipped it back into my chromebox but it won't boot. I get an error at the seabios screen telling me it is unable to read hard disk. Will this be possible to do if so can someone help please. Thankyou
*****update solved*****
Been hacking away at it today and I have found a solution. I downloaded rufus but at first it wouldnt pick up my m.2 ssd in the enclosure so I pressed alt + f together and it appeared. I installed the remix os iso on it and bang it works.
Anyone who has a chromebox and wants remix on it as a standalone operating system then pick up an enclosure and follow the steps above. Thanks
Hope this helps anyone else
Click to expand...
Click to collapse
do you have to custom bios to use this method?
MinhTungMT said:
do you have to custom bios to use this method?
Click to expand...
Click to collapse
Yes just google Kodi E-Z setup script and follow the instructions to prep your box and flash the custom firmware. I have mine on option 6 standalone custom core boot firmware. It works flawlessly.
Sent from my SM-G925F using Tapatalk
I actually made a mistake and ruined my bios been messing around all day trying to figure it out Installed Gallian Linus without fail then I ran Remix OS from USB and was able to access my internal hdd which to me is what I wanted anyway then I made another copy of my Remix OS on USB and I copied my USB drive with Remix duplicate into my hdd when it was done I rebooted my chrome box and Remix OS is running from hdd only issue I have is it doesn't load first option just takes to long been over 1hr the second option loads fine
need to find another version that works for chrome box I'm using the one from YouTube video need one that skips the guest mode and goes right into OS so I get full access to Remix and not this crap can't write stuff