Hello, I own a rooted HTC Desire 630 and I attempted to install Xposed Framework two times now, but both of my attempts failed miserably ( I got stuck at HTC boot screen, although I could access the recovery ) . So miserably that I had to relock the BL and flash the stock ROM. This is getting annoying, because I followed all the steps really carefully ( FROM HERE: bit(DOT)ly(SLASH)2oS8H1u ) and I used the correct ARM .zip file. Is there a software problem that doesn't allow this file to be flashed? Or do I have to use special Xposed files just like it's needed for Samsung?
I have to mention that I had unlocked BL, Superuser access and the latest TWRP beta made by @Captain_Throwback when doing the prcedure.
ANY HELP/FEEDBACK WOULD BE APPRECIATED
1. Root your phone
2. Install Magisk manager apk
3. Flash Magisk from recovery
4. Flash systemless Xposed framework
5. Install Xposed manager apk (modified for systemless xposed framework)
6. Install modules you want/ need.
7. Done!
mr_techno said:
1. Root your phone
2. Install Magisk manager apk
3. Flash Magisk from recovery
4. Flash systemless Xposed framework
5. Install Xposed manager apk (modified for systemless xposed framework)
6. Install modules you want/ need.
7. Done!
Click to expand...
Click to collapse
Did you attempt it? If yes, did it finish successfully?
KedBit said:
Did you attempt it? If yes, did it finish successfully?
Click to expand...
Click to collapse
I'll let the screenshots do the talking....
Screen1
Screen2
mr_techno said:
I'll let the screenshots do the talking....
That seems pretty convincing. I'll try it myself and confirm if it works for me.
Oh, and one more thing: Substratum. It's practically unusable for this device. Once you enter and finish the initial setup, you are prompted to grant it multiple app permissions, aswell as Superuser permissions. As soon as I hit GRANT on the Superuser pop-up, the phone reboots itself and the whole app data is cleared. Is it just my device that's operating like this or is Substratum unsupported?
Wondering if I should create a new thread on this if the problem persists.
Click to expand...
Click to collapse
Doesn't seem to work for me, Magisk just wouldn't install. Flashed the .zip in TWRP (v12.0) but after the reboot Magisk is still not installed.
So, in conclusion, the question still remains and the thread still awaits valid replies on how to do it.
KedBit said:
Doesn't seem to work for me, Magisk just wouldn't install. Flashed the .zip in TWRP (v12.0) but after the reboot Magisk is still not installed.
So, in conclusion, the question still remains and the thread still awaits valid replies on how to do it.
Click to expand...
Click to collapse
Use this twrp (TEST2) found on this link HERE, Install Magisk apk, flash the Magisk zip, search on XDA for SYSTEMLESS XPOSED FRAMEWORK on that thread you will find modified Xposed installer apk and ZIP file that you need to flash. While in recovery you can flash supersu zip, just google for that one. Aaaaaand you're done!
mr_techno said:
Use this twrp (TEST2) found on this link HERE, Install Magisk apk, flash the Magisk zip, search on XDA for SYSTEMLESS XPOSED FRAMEWORK on that thread you will find modified Xposed installer apk and ZIP file that you need to flash. While in recovery you can flash supersu zip, just google for that one. Aaaaaand you're done!
Click to expand...
Click to collapse
I got boot loop help me in geting stock rom for thid device please help give link
---------- Post added at 11:38 AM ---------- Previous post was at 11:26 AM ----------
KedBit said:
Hello, I own a rooted HTC Desire 630 and I attempted to install Xposed Framework two times now, but both of my attempts failed miserably ( I got stuck at HTC boot screen, although I could access the recovery ) . So miserably that I had to relock the BL and flash the stock ROM. This is getting annoying, because I followed all the steps really carefully ( FROM HERE: bit(DOT)ly(SLASH)2oS8H1u ) and I used the correct ARM .zip file. Is there a software problem that doesn't allow this file to be flashed? Or do I have to use special Xposed files just like it's needed for Samsung?
I have to mention that I had unlocked BL, Superuser access and the latest TWRP beta made by @Captain_Throwback when doing the prcedure.
ANY HELP/FEEDBACK WOULD BE APPRECIATED
Click to expand...
Click to collapse
Need stock rom of htc 630 please where u got
Give link
It does not work for me, tried everything.
How to edit in build.prob
I try to edit but after reboot on changes
Edited line are removed on every reboot ..
Any one know why and how to edit
DISCLAIMER: So if you're thinking this is the same as [GUIDE] TWRP, ROOT and XPosed - Only J320FN ! you're right, but you're also wrong. The process is somewhat the same of course, but i did not followed that guide nor use any of his files, i'll explain a lot of things, introduce you to magisk.... And here we're talking of the J320F and J320F/DS , which is the variant I have. Yes FN stuff works on F and F/DS most of the time, i'm aware.
With that out of th way let's talk business, I'm running stock 5.1.1 on my Samsung Galaxy J3 2016 J320F. This guide is for Stock ROM, custom roms come pre-rooted or use their own Root addon like Lineage, in the other hand, Samsung's stock roms based on Android L and M are not compatible with the official Xposed Framework from Rovo89, it will bootloop the device, instead we have to use a modified Xposed made by Wanam, more on that later.
I'm going to split this guide in 3 parts, first we're gonna install the custom recovery TWRP via Odin, the recovery will enable us to flash zip files which will allows us to Root the device and finally install Xposed.
How to Install TWRP on the J3 J320FThe tool to flash firmwares files on Samsung phones running Android is called Odin, and in order for Odin to recognize your phone in Download Mode (more on that later) it also needs some drivers. You can download both things from the following links:
Odin 3.10 from MEGA*
<Mod Edit> 4shared link removed
PLEASE READ [*]
1. Both files are in .RAR5, so you need to use WinRAR 5 or above to be able open them.
2. They also are password protected (sorry about that, but i offer them on several sites already). Password is: Tecnoriales
TWRP 3.0.2 for J320F - is a *.tar file, leave it as is, i mean don't extract it.
Before you star please charge your battery to 100%.
1. Install the Samsung Drivers.
2. In your J320F go to Settings>About phone>Software Info and tap 7 times on the Build Number, you'll see a toast message about "Developers Options" being now enabled.
3. Head back to Settings and now youll see Developer Options, enter there turn the toggle for Disable OEM Unlock, you'll face your security challenge, whatever it is you have (pin, password, pattern...).
NOTE: From now on leave Disable OEM Unlock thicked (what i mean is, if you turn the toggle to his original state will enable OEM Unlock). otherwise when you reboot your phone it won't boot again showing you the Custom Binary blocked by FRP Block" error in red letter. This can only be fixed Flashing the stock rom on your J320F, although you might not lose your data you will lose TWRP, root and Xposed. So, BE CAREFUL!
4. Turn off your phone and enter Download Mode pressing Vol+- Home and Power. You'll see a warning in the screen, accept it pressing Vol+.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Plug your phone to the PC using your usb cable and give it some time for the driver to kick in if it is the very first time.
6. Run Odin as Admin. Check the COM Port is illuminated and you see Added in the log below.
7. Click the AP button and load the *.tar file of the TWRP.
8. Go to Options Tab and disable Auto-Reboot.
9. Press Start and wait Odin to say Pass in green. It's only a couple of seconds.
10. Unplug your phone from the PC and remove the battery and put it back. Now turn in on with the key combo: Vol+, Home and power.
Your J320F will boot straight to TWRP- Change the language from Russian to whatever you want and swipe to the right the slider in the bottom of the screen to enable the TWRP to modify the system. That's it.
How to ROOT the J3 J320F using SuperSu or MagiskGrab your rooting tool:
SuperSu - Good old SuperSu from Chainfire. Might hang from time to time and refuse to grant root access, kinda has bad temper.
or
Magisk + Magisk Manager APK. Newest and systemless root. Works like a charm, I used v16.0.
Before you star please charge your battery to 100%. You might want make a nandroid backup with TWRP before rooting.
1. Copy the *.zip file to the sdcard of your J320F
2. Boot into TWRP.
3. Go to Install and navigate to your sdcard to find and select the zip file.
4. Swipe to the right the slider control on the bottom of the screen to start the flashing process, which you can follow in the log.
5. Once it has finished touch on Reboot System and wait for the phone to boot. It might take a loot of time if you installed SuperSu.
You will have in your launcher the app of your root manager app. Test that root is working with root checker, Link2Sd, or whatever needs root access.
Note: If you rooted with Magisk and don't see Magisk Manager on your launcher, install the apk manually.
How to Install Xposed Framework on the J3 J320FAs I said at the beginning of this post, YOU CAN'T USE OFICIAL XPOSED on Samsungs stock roms (Android 5.x and 6.x) it will make your device loop on the boot process. This is due to the heavy modifications Samsung make to Android to turn it into his TouchWiz UI.
To install Xposed you need:
Xposed Framework by Wanam - The current (and probably final) version is 87.1, download the zip for ARM and SDK22. Optional: Also download Xposed Uninstaller zip in case you get a bootloop.
Xposed Installer App - Is an APK file attached to this thread, which by the way is the official Xposed Framework thread by Rovo89, don't used Xposed zips from there!
Before you star please charge your battery to 100%. You might want make a nandroid backup with TWRP before rooting.
1. Copy files to your sdcard. And install Xposed Installer.
2. Boot into TWRP, go to install and select the xposed-v87.1-sdk22-arm-custom-build-by-wanam-20161125 zip.
3. Swipe to the right the slider control on the bottom of the screen to start the flashing process and wait.
4. When it finishes select Reboot System. This will be a long boot, be patient.
After booting go to the Xposed Installer, or install it if you havent already, and see if Xposed is enabled. You should see the version and the samsung warning like in this pick
NOTE: DO NOT UPDATE XPOSED from the Xposed Installer app, it will flash official Xposed and you will get ****ed, i mean, a bootloop.
Xposed has tons, and tons, and tons of modules, most of them won't work on Samsung roms, again, due to all the changes Samsung made to Android in his stock roms. Always read carefully the info of any module before installing it, believe me they are state it when they wont work on Samsung roms. There's one module you should never even try to install:
It's called Gravity Box... The most powerful and famous module of all, and no, it wont work on your Samsung.
However, theres something called Wanam Xposed, made by the same dev from the modified Xposed we are using, it has some of the features you can find in GB.
All the above information is in this video i made. Video is in Spanish tough.
Sorry for my english, good luck and happy flashing.
can you make an English video please thx!
DeblaGaming said:
can you make an English video please thx!
Click to expand...
Click to collapse
Not happening.
DeblaGaming said:
can you make an English video please thx!
Click to expand...
Click to collapse
Seems pretty straight forward. A word of advice. When doing things like this for first time and if you don't know what to do rather follow text tutorials than videos. Easier to keep up...
Can twrp be updated with latest version or is this some custom twrp only for this model?
I haven't played a lot with flashing on samsungs so I'm doing my reading before. I have FN model. Is there some custom ROM that offers better experience or should I just root stock and get rid of bloatware and tweak it as I like with xposed?
the_bulk said:
Seems pretty straight forward. A word of advice. When doing things like this for first time and if you don't know what to do rather follow text tutorials than videos. Easier to keep up...
Can twrp be updated with latest version or is this some custom twrp only for this model?
I haven't played a lot with flashing on samsungs so I'm doing my reading before. I have FN model. Is there some custom ROM that offers better experience or should I just root stock and get rid of bloatware and tweak it as I like with xposed?
Click to expand...
Click to collapse
Theres no official TWRP for Speadtrum based 2016 J3s. There are newer versions for the J30F/FN i think, but atm i don't care/need it.
Since we don't have an Exynos or Qualcomm SoC, the custom rom scene doesn't look so good. Pretty much you have Lineage (MM & N), RR (N) and more recently DotOS (N), but they all suffer from pretty much the same problems give or take, in top of that most of the other roms are dead since the devs moved on to other phones, the ones I mentioned before don't really receive updates oftem. Right now im using stock with root and Xposed, is working fine, however im thinking about giving a second chance this rom: https://forum.xda-developers.com/galaxy-j3-2016/development/j2-pro-port-markus-rooted-t3657383 is stock MM, a port from the j210F wich i think is newer and somewhat better than this other j2 port: https://forum.xda-developers.com/galaxy-j3-2016/development/marshmallow-rom-j320f-t3623551
Can it flash newest SuperSu v2.82 flashable zip,through TWRP?
Odin Faild
Hi Guys!
I tried to flash the TWRP recovery on my J3 (2016) , but odin saids its faild could you help me with it please?
milewap said:
Can it flash newest SuperSu v2.82 flashable zip,through TWRP?
Click to expand...
Click to collapse
I flashed latest Magisk v18,with TWRP and yes TWRP vorks great tnx dev...for all :good:
Here's another one TWRP custom recovery,this one he has a bekap EFS....downloaded from 4pda ru site.All credits goes to them
SM-J320F-TWRP-F2FS.tar.md5
And here SM-J320FN-TWRP-F2FS.tar.md5 for FN but it does,on J320F i flashed today and works without problems.
Here it is PIT J320F if someone needs it...
Need help
mauriciognr said:
DISCLAIMER: So if you're thinking this is the same as [GUIDE] TWRP, ROOT and XPosed - Only J320FN ! you're right, but you're also wrong. The process is somewhat the same of course, but i did not followed that guide nor use any of his files, i'll explain a lot of things, introduce you to magisk.... And here we're talking of the J320F and J320F/DS , which is the variant I have. Yes FN stuff works on F and F/DS most of the time, i'm aware.
With that out of th way let's talk business, I'm running stock 5.1.1 on my Samsung Galaxy J3 2016 J320F. This guide is for Stock ROM, custom roms come pre-rooted or use their own Root addon like Lineage, in the other hand, Samsung's stock roms based on Android L and M are not compatible with the official Xposed Framework from Rovo89, it will bootloop the device, instead we have to use a modified Xposed made by Wanam, more on that later.
I'm going to split this guide in 3 parts, first we're gonna install the custom recovery TWRP via Odin, the recovery will enable us to flash zip files which will allows us to Root the device and finally install Xposed.
How to Install TWRP on the J3 J320FThe tool to flash firmwares files on Samsung phones running Android is called Odin, and in order for Odin to recognize your phone in Download Mode (more on that later) it also needs some drivers. You can download both things from the following links:
Odin 3.10 from MEGA*
<Mod Edit> 4shared link removed
PLEASE READ [*]
1. Both files are in .RAR5, so you need to use WinRAR 5 or above to be able open them.
2. They also are password protected (sorry about that, but i offer them on several sites already). Password is: Tecnoriales
TWRP 3.0.2 for J320F - is a *.tar file, leave it as is, i mean don't extract it.
Before you star please charge your battery to 100%.
1. Install the Samsung Drivers.
2. In your J320F go to Settings>About phone>Software Info and tap 7 times on the Build Number, you'll see a toast message about "Developers Options" being now enabled.
3. Head back to Settings and now youll see Developer Options, enter there turn the toggle for Disable OEM Unlock, you'll face your security challenge, whatever it is you have (pin, password, pattern...).
NOTE: From now on leave Disable OEM Unlock thicked (what i mean is, if you turn the toggle to his original state will enable OEM Unlock). otherwise when you reboot your phone it won't boot again showing you the Custom Binary blocked by FRP Block" error in red letter. This can only be fixed Flashing the stock rom on your J320F, although you might not lose your data you will lose TWRP, root and Xposed. So, BE CAREFUL!
4. Turn off your phone and enter Download Mode pressing Vol+- Home and Power. You'll see a warning in the screen, accept it pressing Vol+.
5. Plug your phone to the PC using your usb cable and give it some time for the driver to kick in if it is the very first time.
6. Run Odin as Admin. Check the COM Port is illuminated and you see Added in the log below.
7. Click the AP button and load the *.tar file of the TWRP.
8. Go to Options Tab and disable Auto-Reboot.
9. Press Start and wait Odin to say Pass in green. It's only a couple of seconds.
10. Unplug your phone from the PC and remove the battery and put it back. Now turn in on with the key combo: Vol+, Home and power.
Your J320F will boot straight to TWRP- Change the language from Russian to whatever you want and swipe to the right the slider in the bottom of the screen to enable the TWRP to modify the system. That's it.
How to ROOT the J3 J320F using SuperSu or MagiskGrab your rooting tool:
SuperSu - Good old SuperSu from Chainfire. Might hang from time to time and refuse to grant root access, kinda has bad temper.
or
Magisk + Magisk Manager APK. Newest and systemless root. Works like a charm, I used v16.0.
Before you star please charge your battery to 100%. You might want make a nandroid backup with TWRP before rooting.
1. Copy the *.zip file to the sdcard of your J320F
2. Boot into TWRP.
3. Go to Install and navigate to your sdcard to find and select the zip file.
4. Swipe to the right the slider control on the bottom of the screen to start the flashing process, which you can follow in the log.
5. Once it has finished touch on Reboot System and wait for the phone to boot. It might take a loot of time if you installed SuperSu.
You will have in your launcher the app of your root manager app. Test that root is working with root checker, Link2Sd, or whatever needs root access.
Note: If you rooted with Magisk and don't see Magisk Manager on your launcher, install the apk manually.
How to Install Xposed Framework on the J3 J320FAs I said at the beginning of this post, YOU CAN'T USE OFICIAL XPOSED on Samsungs stock roms (Android 5.x and 6.x) it will make your device loop on the boot process. This is due to the heavy modifications Samsung make to Android to turn it into his TouchWiz UI.
To install Xposed you need:
Xposed Framework by Wanam - The current (and probably final) version is 87.1, download the zip for ARM and SDK22. Optional: Also download Xposed Uninstaller zip in case you get a bootloop.
Xposed Installer App - Is an APK file attached to this thread, which by the way is the official Xposed Framework thread by Rovo89, don't used Xposed zips from there!
Before you star please charge your battery to 100%. You might want make a nandroid backup with TWRP before rooting.
1. Copy files to your sdcard. And install Xposed Installer.
2. Boot into TWRP, go to install and select the xposed-v87.1-sdk22-arm-custom-build-by-wanam-20161125 zip.
3. Swipe to the right the slider control on the bottom of the screen to start the flashing process and wait.
4. When it finishes select Reboot System. This will be a long boot, be patient.
After booting go to the Xposed Installer, or install it if you havent already, and see if Xposed is enabled. You should see the version and the samsung warning like in this pick
NOTE: DO NOT UPDATE XPOSED from the Xposed Installer app, it will flash official Xposed and you will get ****ed, i mean, a bootloop.
Xposed has tons, and tons, and tons of modules, most of them won't work on Samsung roms, again, due to all the changes Samsung made to Android in his stock roms. Always read carefully the info of any module before installing it, believe me they are state it when they wont work on Samsung roms. There's one module you should never even try to install:
It's called Gravity Box... The most powerful and famous module of all, and no, it wont work on your Samsung.
However, theres something called Wanam Xposed, made by the same dev from the modified Xposed we are using, it has some of the features you can find in GB.
All the above information is in this video i made. Video is in Spanish tough.
Sorry for my english, good luck and happy flashing.
Click to expand...
Click to collapse
Hey man youre the best guid i found on the internet
I have a j320f, stock rom, 5.1.1.OS and i rooted it twice with superus and magisk. I flashed em with twrp
At first the root checker said root is not installed correctly. Then i rooted it with kingo root and problem solved
I didnt install Xposed
But after some hours my phone restarted and kept bootlooping. I flashed the firmware... my phone worked again. Then again i rooted it but this time i made a backup.
I flashed magisk again (your exact version) and pressed root on kingo root again to make the root checke say the device is rooted
And the bootloop happened again
I wanna know that XposedFramework by wanam does prevent bootloop?
Or is there anything that can be done for preventing bootloop?
AminNadery said:
Hey man youre the best guid i found on the internet
I have a j320f, stock rom, 5.1.1.OS and i rooted it twice with superus and magisk. I flashed em with twrp
At first the root checker said root is not installed correctly. Then i rooted it with kingo root and problem solved
I didnt install Xposed
But after some hours my phone restarted and kept bootlooping. I flashed the firmware... my phone worked again. Then again i rooted it but this time i made a backup.
I flashed magisk again (your exact version) and pressed root on kingo root again to make the root checke say the device is rooted
And the bootloop happened again
I wanna know that XposedFramework by wanam does prevent bootloop?
Or is there anything that can be done for preventing bootloop?
Click to expand...
Click to collapse
You should use latest Magisk. If you install magisk you dont need anything else, if you dont see the magisk app after rebooting just go an download an install latest magisk manager from their thread. Stay away from kingo, use magisk, pay atention to what you are doing, youre using magisk and kingo at the same time, of course youll get a bootloop.
PD: Never quote OP.
Sorry for bothering again.
mauriciognr said:
You should use latest Magisk. If you install magisk you dont need anything else, if you dont see the magisk app after rebooting just go an download an install latest magisk manager from their thread. Stay away from kingo, use magisk, pay atention to what you are doing, youre using magisk and kingo at the same time, of course youll get a bootloop.
PD: Never quote OP.
Click to expand...
Click to collapse
Hey man thanks for the help...i did as you told and i installed magisk v19 using the TWRP.the magisk manager was installed after the reboot BUT the root checker said that the root was not installed properly. In fact the prompt and grant pop up never showed up. I had this problem with superSU too and that was the reason i used the kingo root. And only after that i could see the phone is rooted in root checker...i didnt installed kingo root this time. Thanks for the warning.
But what can i do? My apps does not have root permission.
I tried installing different versions of magisk. The latest v19 and the one u used v16.0. It didnt helped.
The app was not hibernated i checked but it was never in the running apps in application manager
SuperSU had the same problem.
What should i do?
Any solutions?
Youre the best. Thanks
AminNadery said:
Hey man thanks for the help...i did as you told and i installed magisk v19 using the TWRP.the magisk manager was installed after the reboot BUT the root checker said that the root was not installed properly. In fact the prompt and grant pop up never showed up. I had this problem with superSU too and that was the reason i used the kingo root. And only after that i could see the phone is rooted in root checker...i didnt installed kingo root this time. Thanks for the warning.
But what can i do? My apps does not have root permission.
I tried installing different versions of magisk. The latest v19 and the one u used v16.0. It didnt helped.
The app was not hibernated i checked but it was never in the running apps in application manager
SuperSU had the same problem.
What should i do?
Any solutions?
Youre the best. Thanks
Click to expand...
Click to collapse
First, perform a factory reset and flash your stock ROM (with odin), afterwards twrp and then magisk. Whatever problem you might have it will go away after a clean install of your rom. Use latest magisk.
Odin
Can I do this without computer???
Disclaimer: I am not an android developer an I am not responsible for bricking your device. The forums contain instructions for unbricking and reflashing your device. You have been warned.
Ok folks I am new here. I spent countless hours trying to debloat the moto e5 play (android oreo 8.1 go). Many headaches and sleepless hours later I finally figured things out the painful way.
Firstly you need to flash twrp recovery. Please see the attached recovery img. There are many recovery images available on the internet but i have found that this one works for me. You must download the correct image/zip for your device or else you will end up in a bootloop. Also you must flash the recovery imag as follows:
Fastboot flash recovery recovery.img (using fastboot Tools).
Just create a folder and copy the image file in it and unzip your fastboot tools in the folder you created. Then open a command window in the folder and with your device in fastboot mode go ahead and flash the recovery.
Secondly You need to install either supersu or magisk to root. I prefered magisk and you can find and download the latest magisk on the internet as well as the updated magisk zip files. Any of the latest magisk 8.0 should work.
Thirdly you should install kingoroot (Not kingroot). Kingoroot seems to be the only one click root app that works on this device. Grant it superuser rights and start uninstalling google apps of your choice (again I will not attach the kingoroot I used. You can google it).
Please note that if you uninstall google completely some apps such as google contacts, calender and youtube will crash. You will see the updated date and time on your phone but you will be unable to save things in the calender as when google was installed. If you want you can uninstall google play services and reinstall a different version of google play services which is compatible with android oreo 8.1 go. then use kingoroot to uninstall calender and contacts and find a compatible version. You should install youtube vanced instead although at this time i am unable to get vanced sign in with microg to work.
You can also uninstall stock youtube and look for a compatible version. I tried installing xposed installer on the E5 bot it causes the device to bootloop no matter which version I tried. I installed TAI CHI xposed but I can't understand chinese so it didnt work for me. Only virtual xposed works but the Aurora store does'nt work.
If anyone else can get a working version of microg and xposed to work I would be so thankful. I have'nt found any custom roms for the E5 but i am always on the lookout.
PS: If you reflash your entire stock rom and you are unable to get a carrier signal and then download another rom from lolinet (I think that is the place I downloaded the stock ROM) and unzip on your pc. Unzip adb and fastboot into the folder where you unzipped the rom. Flash as follows:
fastboot erase modemst1
fastboot erase modemst2
fatboot flash NON-HLOS.bin
No need to reflash the whole ROM just these. That should work.
.
greetings friend
maybe you can help me my equipment is a moto e5 play xt1920-19 pettyl
although I have a recovery 3.3.1.0 that I downloaded from here on this forum.
but I have not been able to install custom rooms and I think it is the recovery.
when I make a backup of everything and
when I want to restore it, everything is lost and it starts only from the beginning as if it were formatted. and also and noticed that the internal memory is not read by the recovery.
Could you help me or at least guide me?
Rgodoy8080 said:
greetings friend
maybe you can help me my equipment is a moto e5 play xt1920-19 pettyl
although I have a recovery 3.3.1.0 that I downloaded from here on this forum.
but I have not been able to install custom rooms and I think it is the recovery.
when I make a backup of everything and
when I want to restore it, everything is lost and it starts only from the beginning as if it were formatted. and also and noticed that the internal memory is not read by the recovery.
Could you help me or at least
Click to expand...
Click to collapse
Strange. It works perfectly on my device. The only roms i flashed was magisk repo and viperfx and they both work very well. I am running android 8.1 go edition. I havent found any custom roms for the devicesuch as lineage OS etc. Development is very slow for this device. You may only be able to flash magisk modules. Also I assume you are using the original stock rom the device came with and it hasnt been altered with a rom from a similar spec device . There are many variants of the E5 play and you need to be sure your device hast the correct firmware.
Rgodoy8080 said:
greetings friend
maybe you can help me my equipment is a moto e5 play xt1920-19 pettyl
although I have a recovery 3.3.1.0 that I downloaded from here on this forum.
but I have not been able to install custom rooms and I think it is the recovery.
when I make a backup of everything and
when I want to restore it, everything is lost and it starts only from the beginning as if it were formatted. and also and noticed that the internal memory is not read by the recovery.
Could you help me or at least guide me?
Click to expand...
Click to collapse
What are you trying to flash? I havent seen any custom ROM OS for this model. You can modify by replacing google apps and install magisk and so on but there are no custom ROMs available for XT1920-19 at the moment.
I have a Alcatel U3 4055T phone (same as TCL 4055T) and I have tried all the simple methods (PC/APK …Kingroot, kingoroot etc) of rooting it with NO SUCCESS. It has Android 6.0, Baseband MT6737M, 3G/LTE. Now I have thought of trying rooting it manually, I have read online and figured out that I might need do as follows:
(1( UNLOCK the boot-loader
(2) FLASH a custom Recovery (TWRP)
(3) EXTRACT Boot image from the phone
(4) PATCH the image in (3) with Magisk
(5) FLASH the patched image back to the phone
I have just successfully unlocked the boot-loader BUT I can find any version of TWRP or any other custom recovery to FLASH into my phone. I have tried all suitable TWRP(s) that I could find online with no success.
PLEASE help me out in rooting my phone … any help from the members and admins will be highly appreciated.
This is to inform that I have successfully rooted this phone using Magisk and now I can enjoy all those apps which require root. I wish to thank the makers of Magisk ... this was simple and straightforward . BUT I I still have stock recovery.
Hello friend can you share the details, I just installed Magisk but cant find any option to root.
sorh said:
Hello friend can you share the details, I just installed Magisk but cant find any option to root.
Click to expand...
Click to collapse
What is the model number of your phone??
sorh said:
Hello friend can you share the details, I just installed Magisk but cant find any option to root.
Click to expand...
Click to collapse
Well … the method I had used only applies to devices with MTK chips. The Best part is that the device only gets rooted after boot && running a script. Means if you wish to keep it un-rooted (for some reasons) you can also do that. The package contains 2 apks and one of them is “magisk” … and other is “mtk-easy-su” install both , you only have to run the later and it will execute magnisk. You can also tic the box for automatically root at boot. Here is the package: https://offlinemodapk.com/mediatek-easy-root-apk/#more-3134
To run those kinds of application, you need the Magisk Manager app if you have a rooted device. By enabling the magisk hide on the app, you would able to run whatever application you need, which cannot work on rooted devices. Becric