bad flash - no network,baseband - Xiaomi Redmi Note 3 Questions & Answers

Hi all,
Thanks in advance.
Officially unlocked snap
baseband is unknown
no network
no wifi
bluetooth is unavailable
mac address looks something like this : 02:00:00 etc
I do have imei numbers for both slots both sv are unknown though
I didn't backup the efs partition
So I tried to flash a different rom but it failed luckly I had backed up the current rom and can access official twrp ( iwas using zcx but when flashing it hung so flashed offical) and fastboot
I'm really not sure how to proceed alot of what I have read seems to point me to fastboot a rom using miflash, but this thread shows a different way but I have my imei.
Thanks again

Try this ://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789
---------- Post added at 10:20 AM ---------- Previous post was at 10:19 AM ----------
Also witch device u have Kenzo Kate Mtk?

damn........apologies to all i can see what i did now looking at this thread I can see I have a Kate.......I've tried to flash kenzo over it.
I'm a idiot. I know
Now what?

crankyness said:
damn........apologies to all i can see what i did now looking at this thread I can see I have a Kate.......I've tried to flash kenzo over it.
I'm a idiot. I know
Now what?
Click to expand...
Click to collapse
now what? reflash with kate

ok so I tried to reflash with Kate I got up to the point where you try and upgrade the qualcomm driver to "10" i couldn't get this to work but flashed anyway Kate v8.0.4.0. After the flash it came up with a error but I rebooted and had dinner. Anyway it seemed to load up but was full of errors popping up at the bottom of the screen. I let it update again. and they went away and i got bluetooth back, next update bought wifi......next and I have a baseband????? baseband version is -8976_GEN_PACK-1.74446.1.75478.1
But to get it to work I did this I had to turn all the radios on and off, i can't get sms to send or recieve???? strange but hangouts work???? mi messenging just shuts really quick on opening android messaging wont let me write or send a message, it will only let me select a contact.
mobile network state is disconnected????????
I can make and recieve phone calls.

Do you have your IMEIs check that

Hi
imei's are both ok thanks.
xiaomi messaging closes on opening with a error but it's to quick to read, android messaging lets you select a contact but you can't write a message????
mobile network state is disconnected - I'm gonna try and manual change the apn's but not till after work .
managed to send pictures and text via hangouts on data last night so don't get why messaging does not work?

If I were you I would reflash a stable rom for your device through mi flash the latest if you want,and also if you have locked bootloader use edl mode instead of fastboot to flash!

Just flashed the latest global developer rom though system update, mobile network state is disconnected.......but I can make and receive texts and phone calls. Hopefully that's it and sorted.
As a side note I can see now that flashing kate when the drivers didn't work, it just reset the device to a early version........all personal data was was still there. This time round it wanted user names and passwords for everything.
Anyway thank you tabenf for your time ideas and patience.

crankyness said:
Just flashed the latest global developer rom though system update, mobile network state is disconnected.......but I can make and receive texts and phone calls. Hopefully that's it and sorted.
As a side note I can see now that flashing kate when the drivers didn't work, it just reset the device to a early version........all personal data was was still there. This time round it wanted user names and passwords for everything.
Anyway thank you tabenf for your time ideas and patience.
Click to expand...
Click to collapse
No problem:good::good:

tabenf said:
No problem:good::good:
Click to expand...
Click to collapse
Did you flash a Marshmallow version?

Of what???
trabuc said:
Did you flash a Marshmallow version?
Click to expand...
Click to collapse
Of what???

Sorry, wrong thread. My mistake

crankyness said:
Just flashed the latest global developer rom though system update, mobile network state is disconnected.......but I can make and receive texts and phone calls. Hopefully that's it and sorted.
As a side note I can see now that flashing kate when the drivers didn't work, it just reset the device to a early version........all personal data was was still there. This time round it wanted user names and passwords for everything.
Anyway thank you tabenf for your time ideas and patience.
Click to expand...
Click to collapse
If it still give you error then download fastboot rom from miui download. And flash it using edl method. This is much more convenient and it will solve all problem. Or if you dont mind using custom rom, then flash LineageOS and then flash Kate Firmware. Thestrix have provided the lates firmware for kate on his thread.

Related

Revert back to MIUI from CM13 if I haven't made any backup

So I flashed the first chinese CM13 build with fingerprint when there was no information about locking bootloader and about making a backup to restore, so I want to go back to MIUI but I don't have any backup to retore so I don't know how to do it, If anyone could tell me and the rest of the people that have done the same as me it would be so thankful.
bornthisjesus said:
So I flashed the first chinese CM13 build with fingerprint when there was no information about locking bootloader and about making a backup to restore, so I want to go back to MIUI but I don't have any backup to retore so I don't know how to do it, If anyone could tell me and the rest of the people that have done the same as me it would be so thankful.
Click to expand...
Click to collapse
just go to bootloader unlocked tutorial[not by mi provided offical tool] and flashed miui
First off, this is not the right forum to ask this questions. Second, if you didn’t make EFS backup I don’t think you can make phone calls, send/receive texts or use mobile data in the official MIUI any longer (someone correct me if I am wrong). You can either try a leaked and unstable MIUI (search for it in the forums) or use some new ROM with fingerprint support on this forum (Santhosh’s CM13, ROMs by Siddhesh.K15 and some others). If you are determined to use MIUI you will have to wait until Xiaomi releases an official marshmallow version.
Filip013 said:
First off, this is not the right forum to ask this questions. Second, if you didn’t make EFS backup I don’t think you can make phone calls, send/receive texts or use mobile data in the official MIUI any longer (someone correct me if I am wrong). You can either try a leaked and unstable MIUI (search for it in the forums) or use some new ROM with fingerprint support on this forum (Santhosh’s CM13, ROMs by Siddhesh.K15 and some others). If you are determined to use MIUI you will have to wait until Xiaomi releases an official marshmallow version.
Click to expand...
Click to collapse
I do have an EFS backup, it's the only one I have, not for the rest of partitions
bornthisjesus said:
I do have an EFS backup, it's the only one I have, not for the rest of partitions
Click to expand...
Click to collapse
Then you’ll be fine. If you unlocked officially, you can’t go wrong.
Filip013 said:
Then you’ll be fine. If you unlocked officially, you can’t go wrong.
Click to expand...
Click to collapse
I unlocked unofficially and after instaling CM13 everytime I want to unlock bootloader with Mi Unlock it gets stuck at 50%
bornthisjesus said:
I unlocked unofficially and after instaling CM13 everytime I want to unlock bootloader with Mi Unlock it gets stuck at 50%
Click to expand...
Click to collapse
Same with me
bornthisjesus said:
I unlocked unofficially and after instaling CM13 everytime I want to unlock bootloader with Mi Unlock it gets stuck at 50%
Click to expand...
Click to collapse
Hmm... Not sure exactly what tutorial @sankhauaa is referring to, but if you just flash any official fastboot, you’ll be fine. Of course in order to restore phone features you will have to install TWRP.
I hardbricked the phone after installing cm13, boot edl and flash fastboot rom, this is the way i've used and phone booted
Sent from my Redmi Note 3 using Tapatalk
I didn't make a backup. I flashed back to global stable 7.3.2.0. Then I went to the fastboot mode and unlocked my bootloader again. The phone worked fine with all phone calls, etc working
Filip013 said:
Hmm... Not sure exactly what tutorial @sankhauaa is referring to, but if you just flash any official fastboot, you’ll be fine. Of course in order to restore phone features you will have to install TWRP.
Click to expand...
Click to collapse
For revert back to miui follow thishttp://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492

Help ! I got a Kate with a Kenzo rom on it

Help ! I got a Kate with a Kenzo rom on it.
Can i flash a Kate rom via Miflash without loosing IMEI, WiFi and bluetooth.
Are there other methods of flashing Kate rom that keeps everything intact?
I have no root and my Bootloader is locked.
Any help aprecieated
rightnow i flashed a Kenzo rom with Kate modem and everything works.
If you wanna kate MIUI rom or your kate RN3 SE..then you must flashing kate RN3 SE fastboot rom with miflash..then you don't needed flashing kate modem again..
I have done that but now i have no wifi no bluetooth.
Gamester87 said:
I have done that but now i have no wifi no bluetooth.
Click to expand...
Click to collapse
What version of fastboot rom you're flashing it..?, and from where you're downloading it..?, is it right from here :
Latest Global Stable fastboot rom for Kate : V8.0.4.0.MHRMIDG
Latest Developer fastboot rom for Kate : v6.11.24
Also you had already choice set to "Clean all" while flashing with miflash..?
i have flashed these fastboot roms in EDL mode with choice set to "Clean all".
should i try it in fastboot mode?
Redmi Note 3 Special Edition Latest Global Developer Version
hxxp://update.miui.com/updates/v1/fullromdownload.php?d=kate_global&b=X&r=global&n=
Redmi Note 3 Special Edition Latest Global Stable Version
hxxp://update.miui.com/updates/v1/fullromdownload.php?d=kate_global&b=F&r=global&n=
in this rom the config.bin is missing i took it from the developer rom.
these roms are from hxxp://en.miui.com/a-234.html
sorry i cant post ouside links repplace xx in the adress with tt
I will try it with your roms and report back.
same with your roms no wifi no bluetooth. I will send this unit back.
Gamester87 said:
same with your roms no wifi no bluetooth. I will send this unit back.
Click to expand...
Click to collapse
Really weird things..
I though your phone already loosing IMEI and mac address on it..i think that's cause by flashing wrong fastboot rom before..you can check it under about phone..after flashing try check it if your phone still has it or not..
Not sure about this if any different in this case..if you still wanna try it to flashing via fastboot mode..you must unlocking your bootloader first..after flashing latest developer fastboot rom..adding your mi account..then go to fastboot mode..then unlock it with miunlock tool..after that if success unlocked..you can try flashing through fastboot mode.
If still doesn't success...just like you said..just send it back your phone to the seller or services center to get fix it or replace the unit with new one.
i dont lost imei i was just asking if ther is a method without loosing IMEI and WiFi.
The phone came with a shop rom i think. It was on MIUI ver. 8.0.1.0 but i couldn't update via updater. I always got the error " Couldn't boot to recovery mode " pretty strange. Thanks for help.
JJeamy said:
Really weird things..
I though your phone already loosing IMEI and mac address on it..i think that's cause by flashing wrong fastboot rom before..you can check it under about phone..after flashing try check it if your phone still has it or not..
Not sure about this if any different in this case..if you still wanna try it to flashing via fastboot mode..you must unlocking your bootloader first..after flashing latest developer fastboot rom..adding your mi account..then go to fastboot mode..then unlock it with miunlock tool..after that if success unlocked..you can try flashing through fastboot mode.
If still doesn't success...just like you said..just send it back your phone to the seller or services center to get fix it or replace the unit with new one.
Click to expand...
Click to collapse
Will not the warranty be void after so many experiments on the device?
Nope..just telling them about wifi and bluetooth problem, and bootloader still in locked state..
Gamester87 said:
i dont lost imei i was just asking if ther is a method without loosing IMEI and WiFi.
The phone came with a shop rom i think. It was on MIUI ver. 8.0.1.0 but i couldn't update via updater. I always got the error " Couldn't boot to recovery mode " pretty strange. Thanks for help.
Click to expand...
Click to collapse
friend. dont send it back. I can solve it for you.
andersonaragao said:
friend. dont send it back. I can solve it for you.
Click to expand...
Click to collapse
Thanks for the help. Now i have send it back it was bought on Ebay so no return cost.
Nevertheless Could you tell me how you would fix it. Just curious and maybe someone who is reading this thread later can solve the problem.
andersonaragao has fixed my phone. Big thanks. I can recommend this guy he know what he is doing.

Phone Signal problem.

Hello everyone, I and my father have the exact same phone (kenzo). The problem is that even though on mine everything works like a charm and I have changed a lot of roms, my father's phone every time I try anything goes soft bricked or have problems with signal and settings. Currently I have flashed via edl the Chinese Dev rom(5.1.1) with which everything works, besides the restrictions of the rom version(language, gapps). I must say that when I first install the Chinese Dev the Sim is not recognised or I have no signal. After the first update everything is ok and calling function works like a charm. After That I try to install twrp (zxc by ~xm) and restore a backup from the previous working installation, but the only I get is settings app fc and problems with calls. Neither of the two sides hear the other while in call. This occurred when I flashed a mm bootloader zip in order to boot to nitrogen is. (https://drive.google.com/file/d/0B3tM1cVKiyp6Q3RvNUtLdEp1Q3M/view ) The rom booted but I had no sound in calling, and the other side couldn't hear either. Any ideas?
Thanks for your time!
Aristalex said:
Hello everyone, I and my father have the exact same phone (kenzo). The problem is that even though on mine everything works like a charm and I have changed a lot of roms, my father's phone every time I try anything goes soft bricked or have problems with signal and settings. Currently I have flashed via edl the Chinese Dev rom(5.1.1) with which everything works, besides the restrictions of the rom version(language, gapps). I must say that when I first install the Chinese Dev the Sim is not recognised or I have no signal. After the first update everything is ok and calling function works like a charm. After That I try to install twrp (zxc by ~xm) and restore a backup from the previous working installation, but the only I get is settings app fc and problems with calls. Neither of the two sides hear the other while in call. This occurred when I flashed a mm bootloader zip in order to boot to nitrogen is. (https://drive.google.com/file/d/0B3tM1cVKiyp6Q3RvNUtLdEp1Q3M/view ) The rom booted but I had no sound in calling, and the other side couldn't hear either. Any ideas?
Thanks for your time!
Click to expand...
Click to collapse
Is ur device bootloader is unlocked ?
If yes then by which method u had unlocked by unofficial way or by official way?
Criston said:
Is ur device bootloader is unlocked ?
If yes then by which method u had unlocked by unofficial way or by official way?
Click to expand...
Click to collapse
I used to unlock it the official way. I found a post in the nitrogenOS thread that said that if the rom doesn't boot I should flash the zip that I have mentioned in my post. They said it was the mm bootloader. The zip contains a file named emmc_appsboot.mbn which is also on the unofficial unlock zip. So I suppose I unlocked it unofficially. I must say that every time after flashing fastboot rom the mi unlock said that bootloader was already unlocked.
Aristalex said:
I used to unlock it the official way. I found a post in the nitrogenOS thread that said that if the rom doesn't boot I should flash the zip that I have mentioned in my post. They said it was the mm bootloader. The zip contains a file named emmc_appsboot.mbn which is also on the unofficial unlock zip. So I suppose I unlocked it unofficially. I must say that every time after flashing fastboot rom the mi unlock said that bootloader was already unlocked.
Click to expand...
Click to collapse
U should unlock using the official way if u dont want to face any problem
And also if wanna Flash any custom rom first clean Flash miui using Mi flash tool and google how to Flash custom rom on kenzo
make sure u have backup of all ur files
Criston said:
U should unlock using the official way if u dont want to face any problem
And also if wanna Flash any custom rom first clean Flash miui using Mi flash tool and google how to Flash custom rom on kenzo
make sure u have backup of all ur files
Click to expand...
Click to collapse
Yes yes I know that with my kenzo everything works if I follow your advice. But with my father's one simply doesn't. I flashed the official miui with mi flash tool. The bootloader remained unlocked without reason. Also I tried clean flash and lock option on the tool without success. Then I wiped data and dalvik and cache and dirty flashed a miui custom rom over it. For the time being everything works perfectly except of the fingerprint sensor. Aida 64 recognize the fp, every other app not. Also I flashed radon kernel because I had settings app FC. That's all. I hope the info help you understand the situation that I am in, and find a way to make it respond as mine...
Mine and the other are exactly the same, they even had the same number on the sticker in the back and same fingerprint sensor. Mine takes every rom, unlock update without problems. My father's not. It is crazy...

Honor 10 Hard Bricked Dead Boot

I used HuRUpdater to flash firmware to my Honor 10 and after following the instructions and performing a full wipe data factory reset and rebooted, it wouldn't turn on at all. I tried everything to get into ERecovery or fastboot but nothing. I read that there's is no solution for unbricking 2018 Honor/Huawei devices. Even Funky Huawei doesn't work or Multi Tool.
awells845 said:
I used HuRUpdater to flash firmware to my Honor 10 and after following the instructions and performing a full wipe data factory reset and rebooted, it wouldn't turn on at all. I tried everything to get into ERecovery or fastboot but nothing. I read that there's is no solution for unbricking 2018 Honor/Huawei devices. Even Funky Huawei doesn't work or Multi Tool.
Click to expand...
Click to collapse
What did service center guys say?
I remember you saying you sent it to service center.
miststudent2011 said:
What did service center guys say?
I remember you saying you sent it to service center.
Click to expand...
Click to collapse
They were unable to fix it or replace the device as bricking voids the warranty.
awells845 said:
They were unable to fix it or replace the device as bricking voids the warranty.
Click to expand...
Click to collapse
Yesterday one user was able to succeed updating through [HuRUpdater] and one of my friend was also able to update to one build but it showed different device specs and the same build build you tried hard bricked his device. If my guess is right it is the build issue and not [HuRUpdater] issue.May be I am wrong ?
https://forum.xda-developers.com/showpost.php?p=76966338&postcount=7
Btw how does the brick Voids warranty ?
Its just a software issue and is covered in warranty.
Which country do you stay ?
miststudent2011 said:
Yesterday one user was able to succeed updating through [HuRUpdater] and one of my friend was also able to update to one build but it showed different device specs and the same build build you tried hard bricked his device. If my guess is right it is the build issue and not [HuRUpdater] issue.May be I am wrong ?
https://forum.xda-developers.com/showpost.php?p=76966338&postcount=7
Btw how does the brick Voids warranty ?
Its just a software issue and is covered in warranty.
Which country do you stay ?
Click to expand...
Click to collapse
I'm in the UK. I'm not exactly sure how bricking voids warranty but my guess would be because the end user is responsible for flashing various software to the device. I do remember seeing on the EMUI website that bootloader unlocking on devices after mid 2018 won't be eligible for bootloader unlocking due to so many hardware bricking cases.
I'm happy with my new OnePlus 6 though. I'll probably have to let go of the hope of recovering the Honor 10 even though I'm making a loss as I was gonna sell it.
awells845 said:
I'm in the UK. I'm not exactly sure how bricking voids warranty but my guess would be because the end user is responsible for flashing various software to the device. I do remember seeing on the EMUI website that bootloader unlocking on devices after mid 2018 won't be eligible for bootloader unlocking due to so many hardware bricking cases.
I'm happy with my new OnePlus 6 though. I'll probably have to let go of the hope of recovering the Honor 10 even though I'm making a loss as I was gonna sell it.
Click to expand...
Click to collapse
Please answer my question:
https://forum.xda-developers.com/showpost.php?p=76975223&postcount=517
I guess that you flashed some wrong Firmware for your device which doesn't match.
I don't think it's because HuRUpdater
Tecalote said:
Please answer my question:
https://forum.xda-developers.com/showpost.php?p=76975223&postcount=517
I guess that you flashed some wrong Firmware for your device which doesn't match.
I don't think it's because HuRUpdater
Click to expand...
Click to collapse
I answered
awells845 said:
I answered
Click to expand...
Click to collapse
Thanks I read it and answered also
awells845 said:
I used HuRUpdater to, flash firmware to my Honor 10 and after following the instructions and performing a full wipe data factory reset and rebooted, it wouldn't turn on at all. I tried everything to get into ERecovery or fastboot but nothing. I read that there's is no solution for unbricking 2018 Honor/Huawei devices. Even Funky Huawei doesn't work or Multi Tool.
Click to expand...
Click to collapse
I have same problem , I connected my device to adb , and I tried to reboot it , with adb reboot bootloader , fastboot reboot etc. and it said starting dameon , but stil nothing. pease help
Hello Guys,
I had exactly the same problem.
I upgraded to EMUI 9 and everything worked fine but I wanted to go back to EMUI 8.1 so I went to TWRP with the intention of doing a factory restoration and downgrade.
I made a Wipe / data, Wipe dalvic / format all data. After this I waited a lot and it didn´t respond.
I had to force the restart and since then the phone no longer works. Same for me, the phone has no recovery and no OS and no erecovery.
I have contacted the people from FunckyHuawei. I have paid 1 credit in order to unbrick the phone but it did not work. They said that; "It would need to be able to reach rescue recovery mode. If it can not reach that, it may be bricked beyond repair. "
Then I contacted another technician, I connected to my computer remotely and he tried to flash all necessary files via fastboot but some of them failed to flash.
He said it looks like there is no TWRP recovery COMPATIBLE for EMUI9 yet.
Now what to do guys? I will really apreciate any help. The phone has only 3 weeks and I feel so noob now.
Kind Regards,
Gerardo
gerardo96 said:
Hello Guys,
I had exactly the same problem.
I upgraded to EMUI 9 and everything worked fine but I wanted to go back to EMUI 8.1 so I went to TWRP with the intention of doing a factory restoration and downgrade.
I made a Wipe / data, Wipe dalvic / format all data. After this I waited a lot and it didn´t respond.
I had to force the restart and since then the phone no longer works. Same for me, the phone has no recovery and no OS and no erecovery.
I have contacted the people from FunckyHuawei. I have paid 1 credit in order to unbrick the phone but it did not work. They said that; "It would need to be able to reach rescue recovery mode. If it can not reach that, it may be bricked beyond repair. "
Then I contacted another technician, I connected to my computer remotely and he tried to flash all necessary files via fastboot but some of them failed to flash.
He said it looks like there is no TWRP recovery COMPATIBLE for EMUI9 yet.
Now what to do guys? I will really apreciate any help. The phone has only 3 weeks and I feel so noob now.
Kind Regards,
Gerardo
Click to expand...
Click to collapse
Solved!??
How did you solve it?
?
maxray said:
How did you solve it?
?
Click to expand...
Click to collapse
Hello Max
I have flashed the update.zip using beta-downy_0.4 program
you have to transfer the 3 zip files update.zip, update_all_hw, update_data_public tp the "Zip-Here" Folder.
Then run the "Flash.bat" file and follow the instruction.
The update.zip will install the twrp recovery. Then I flashed the Kernel.img and system.img
after restar the phone was like new with EMUI9. However there are things that are not really well, such like the info in "about phone" is not showing the "compilation number" nor model number, also other options and functionalities has dissapeared but for the rest the phone works fine. At least you can recover the phone. I will do some more research today to fix those issues. I might have to reflash the whole system again.
maxray said:
How did you solve it?
?
Click to expand...
Click to collapse
Hello Max, any news?
In this case i would roll back on emui 8 to make sure that everything works and then go emui 9 by using hisuite 5.0.0.300 and change ip4 dns. Tht should work. I remember on huawei p9 it has to be with an earlier version to be able to pass some main things to the next firmware so you will jot have broken menus. That was upgrading ofc emui 6 to emui 7. I ssume though its something similar
vampirian said:
In this case i would roll back on emui 8 to make sure that everything works and then go emui 9 by using hisuite 5.0.0.300 and change ip4 dns. Tht should work. I remember on huawei p9 it has to be with an earlier version to be able to pass some main things to the next firmware so you will jot have broken menus. That was upgrading ofc emui 6 to emui 7. I ssume though its something similar
Click to expand...
Click to collapse
Yes , that's what I did. I rolled back to 8.0 by changing the DNS as well. Then I have upgraded to 8.1 and I will wait for EMUI9 OTA.
Glad to hear your phone is back to life?
gerardo96 said:
Hello Max, any news?
Click to expand...
Click to collapse
Oh I didn't have any problems with my phone but I wanted to know how to solve it in case I try to upgrade it and have some problems . Sorry for giving the impression that I had a bricked device
Hello, I have a similar problem I've been using emui 9 for a month but I decided to roll back because there was some app draining the battery when I went to recovery and wiped the data but that didn't work for some reason. now I'm unable to use my phone the only thing i can use is the fastboot
---------- Post added at 03:15 PM ---------- Previous post was at 03:13 PM ----------
gerardo96 said:
Yes , that's what I did. I rolled back to 8.0 by changing the DNS as well. Then I have upgraded to 8.1 and I will wait for EMUI9 OTA.
Glad to hear your phone is back to life
Click to expand...
Click to collapse
gerardo96 said:
Hello Max
I have flashed the update.zip using beta-downy_0.4 program
you have to transfer the 3 zip files update.zip, update_all_hw, update_data_public tp the "Zip-Here" Folder.
Then run the "Flash.bat" file and follow the instruction.
The update.zip will install the twrp recovery. Then I flashed the Kernel.img and system.img
after restar the phone was like new with EMUI9. However there are things that are not really well, such like the info in "about phone" is not showing the "compilation number" nor model number, also other options and functionalities has dissapeared but for the rest the phone works fine. At least you can recover the phone. I will do some more research today to fix those issues. I might have to reflash the whole system again.
Click to expand...
Click to collapse
I tried that but it didn't work. Did you do anything before that ?
For now, there's no guaranteed method to roll back to oreo. I recommend that you wait for an update
PalakMi said:
For now, there's no guaranteed method to roll back to oreo. I recommend that you wait for an update
Click to expand...
Click to collapse
I did, I could rolled back to 8.0 and then I updated to 8.1 but first you have to unbrick your phone as I did with EMUI9
---------- Post added 6th January 2019 at 12:02 AM ---------- Previous post was 5th January 2019 at 11:58 PM ----------
superuser590 said:
Hello, I have a similar problem I've been using emui 9 for a month but I decided to roll back because there was some app draining the battery when I went to recovery and wiped the data but that didn't work for some reason. now I'm unable to use my phone the only thing i can use is the fastboot
---------- Post added at 03:15 PM ---------- Previous post was at 03:13 PM ----------
I tried that but it didn't work. Did you do anything before that ?
Click to expand...
Click to collapse
Make sure to include the Twrp.iso file
My phone was hard bricked... Everybody said It couldn't be fixed..but I did! If course I suffered 4 days trying to revive it day and night..until I got it

[Flash ROM.bat][Android 9] Flash Stock ROM of your MOTO G7 PLUS!!!

FOR MOTO G7 PLUS ONLY!!!
Hello, everyone.
I created a .bat file "executable " For those who want to flash the stock rom on your Moto G7 Plus.
Just put it in the stock Rom folder along with the fastboot files and run the file.
For those who want the file, just download it by the following link or download the file that is on the thread.
http://www.mediafire.com/file/q836uaerr17pn0f/Flash_ROM_G7%252B.zip/file
Could you share where to get the Stock ROM fein?
---------- Post added at 11:13 PM ---------- Previous post was at 10:25 PM ----------
Tried the same sequence with a Stock ROM last week, but didn't achieve to get back to original ROM. I always get the prompt in the initial boot, that a different OS is installed than the original. This has the consequence that I cannot upgrade wit OTA anymore. And there is an upgrade already available (Jan security patch)
moto g7 G7........
any one have a flash rom.bat stock rom for moto g7.......
Which stock rom did you flash on your Moto g7 plus?
Where can I find the stock rom?
Nes.
NesNol said:
Where can I find the stock rom?
Nes.
Click to expand...
Click to collapse
Didn't you just find it yesterday on the telegram group?
What was the problem that you asked again here today?
Latest Stock ROM RETAIL at that link is the one we have all been using.
You'll need to download it to a computer, unzip it in a folder with the fastboot/ADB files, then fastboot flash it with phone attached in bootloader mode.
NesNol said:
Where can I find the stock rom?
Nes.
Click to expand...
Click to collapse
You have a model of the XT1965-3 smartphone and region of the software is reteu? Then this your last firmware.
"Your device has loaded a different operating system."
baikal0912 said:
You have a model of the XT1965-3 smartphone and region of the software is reteu? Then this your … .
Click to expand...
Click to collapse
Thank you very much!
I guess that the software channel was reteu.
A second moto g7 phone I bought - and is unmodified - says "software channel: reteu".
The information on the package of my phone says XT1965-3.
I flashed this image already, the result is a 'working' system except for the message at the start "Your device has loaded a different operating system." .
NesNol said:
Thank you very much!
I guess that the software channel was reteu.
A second moto g7 phone I bought - and is unmodified - says "software channel: reteu".
The information on the package of my phone says XT1965-3.
I flashed this image already, the result is a 'working' system except for the message at the start "Your device has loaded a different operating system." .
Click to expand...
Click to collapse
This will get rid of that message we all got too:
[Bootlogo] Modded Bootlogo from unlocked bootloader
The new RETEU stock version was just updated in last few days, before that not available and you could have used the RETAIL channel that I mentioned above, it worked fine for several users on RETEU channel.
Dahenjo said:
This will get rid of that message we all got too:
The new RETEU stock version was just updated in last few days, before that not available and you could have used the RETAIL channel that I mentioned above, it worked fine for several users on RETEU channel.
Click to expand...
Click to collapse
Get rid of the message?
Does that also mean that OTAs will work? That banking apps will not complain about the integrity of the system?
Thanks!
NesNol said:
Get rid of the message?
Click to expand...
Click to collapse
Yes, you said: except for the message at the start "Your device has loaded a different operating system."
After unlocking bootloader there is some message like this on starting device, keep in mind we all got these too and everything is fine but we like to cover it up with a different bootlogo, just looks better that is its only purpose. This message is because you also upgraded the firmware, meaning it's not really a different OS but only a different version of your correct OS.
Does that also mean that OTAs will work? That banking apps will not complain about the integrity of the system?
Click to expand...
Click to collapse
For G7 Plus we are not getting the OTAs properly after unlocking or rooting, I was originally rooted on PPW29.98-28 and repeatedly got the notifications of upgrading to 29.98-66-2 but it kept failing, the only way to stop it was freezing the Moto Update Process using Titanium Backup. So my only remaining option to upgrade was to fastboot flash the full firmware, as you just did, it wipes your data but gets you to the same place.
With future updates we may be able to capture them and then a dev can make them into a TWRP flashable zip with no wiping of internal data. We had that on G5 Plus which was a nice thing and they are still doing that. But until that might happen the best we can do is the same for now - when your channel has an update just get it from lolinet (these are all official stock firmwares there) and fastboot flash after backing up your data.
Usually it is more from the rooting (if you did that too) that may mess up your banking or other apps, but in Magisk there are settings that may work on that, you'll just have to try and see but there are mixed results. My choice is to not use banking apps on my devices anyway even if not unlocked or rooted, I just do it from home on a computer that I won't forget and leave out in public somewhere. :crying:
Dahenjo said:
Yes, you said: except for the message at the start "Your device has loaded a different operating system."
…
…
Click to expand...
Click to collapse
Hi,
thank you very much for your elaborate answer!
I will come back on it soon.
Nes
Dahenjo said:
Yes, you said: except for the message at the start "Your device has loaded a different operating system."
After unlocking bootloader there is some message like this on starting device, keep in mind we all got these too and everything is fine but we like to cover it up with a different bootlogo, just looks better that is its only purpose. This message is because you also upgraded the firmware, meaning it's not really a different OS but only a different version of your correct OS.
For G7 Plus we are not getting the OTAs properly after unlocking or rooting, I was originally rooted on PPW29.98-28 and repeatedly got the notifications of upgrading to 29.98-66-2 but it kept failing, the only way to stop it was freezing the Moto Update Process using Titanium Backup. So my only remaining option to upgrade was to fastboot flash the full firmware, as you just did, it wipes your data but gets you to the same place.
With future updates we may be able to capture them and then a dev can make them into a TWRP flashable zip with no wiping of internal data. We had that on G5 Plus which was a nice thing and they are still doing that. But until that might happen the best we can do is the same for now - when your channel has an update just get it from lolinet (these are all official stock firmwares there) and fastboot flash after backing up your data.
Usually it is more from the rooting (if you did that too) that may mess up your banking or other apps, but in Magisk there are settings that may work on that, you'll just have to try and see but there are mixed results. My choice is to not use banking apps on my devices anyway even if not unlocked or rooted, I just do it from home on a computer that I won't forget and leave out in public somewhere. :crying:
Click to expand...
Click to collapse
So you expect that in future my phone will be OK again? And receive OTAs while having Magisk installed.
I tried indeed to Magisk my phone, as I did with my old OnePlus One.
Which leads to TWRP, but then I discovered that the recovery has disappeared on this Moto!?
Then I was lost, and read about A/B and treble(?).
Concerning the banking applications: Even if I handle the banking transactions on my Mac, I still need the banking app on my phone for authentication.
Which is also true for accessing my medical data (GP, hospitals, etc), insurance companies, taxes, etc.
Last question: Is there a full description of how to magisk my phone?
Dahenjo said:
Yes, you said: except for the message at the start "Your device has loaded a different operating system."
…
…
…
…
Click to expand...
Click to collapse
I have replied to this messages twice.
None has arrived?!
Nes
---------- Post added at 01:34 PM ---------- Previous post was at 01:33 PM ----------
Dahenjo said:
Yes, you said: except for the message at the start "Your device has loaded a different operating system."
…
…
…
…
Click to expand...
Click to collapse
I have replied to this message twice.
None has arrived?!
Nes
NesNol said:
So you expect that in future my phone will be OK again? And receive OTAs while having Magisk installed.
I tried indeed to Magisk my phone, as I did with my old OnePlus One.
Which leads to TWRP, but then I discovered that the recovery has disappeared on this Moto!?
Then I was lost, and read about A/B and treble(?).
Concerning the banking applications: Even if I handle the banking transactions on my Mac, I still need the banking app on my phone for authentication.
Which is also true for accessing my medical data (GP, hospitals, etc), insurance companies, taxes, etc.
Last question: Is there a full description of how to magisk my phone?
Click to expand...
Click to collapse
Sorry not to reply yet, I sometimes have other things going on besides my phone. Also I thought I gave you a good answer on the situation, based on what I know as just another user (not a dev, not with Moto).
Yes, there have been changes since your last phone, it was the same for me. So it's good to find out as much as possible before deciding to unlock & root again, because the results may not be like before. We used to unlock and flash TWRP directly but we can't do that now or maybe brick the phone. It is always the risk when choosing not to remain fully stock/locked/etc as when you bought it, and with that is a responsibility to do the research first and not just expect other users to tell you every step.
So I don't know if things will change, but for now we can't get OTAs anymore after unlocking. For me I didn't mind and I am willing to upgrade manually if that let's me work with the device the way I like with root & using custom ROMs etc. I didn't plan to ever go back to how I bought it and don't need banking apps or other types that rooting might mess up. For others that may not be the case so they must learn the situation then decide for themselves.
As for installing Magisk, now we have TWRP working enough to just put the Magisk zip on your SD card and install it in TWRP. Before we had a functional TWRP we had another method by installing Magisk Manager and using it to patch the boot.img then fastboot flash that, but it's not needed anymore since TWRP, just do it the old way now.
Flashing the roms from lolinet, in my case ( RETEU[/URL) is a complete reset of the phone, I assume.
To flash, these steps should be right:
Copying the firmware to sdcard.
Boot in TWRP
Flashing the lolinet firmware.
Delete Dalvik Cache.
Should TWRP and Magisk be reinstalled immedeately after this procedure? Or renew the developer mode, reinstall twrp and magisk?
Woif said:
Flashing the roms from lolinet, in my case RETEU is a complete reset of the phone, I assume.
To flash, these steps should be right:
Copying the firmware to sdcard.
Boot in TWRP
Flashing the lolinet firmware.
Delete Dalvik Cache.
Should TWRP and Magisk be reinstalled immedeately after this procedure? Or renew the developer mode, reinstall twrp and magisk?
Click to expand...
Click to collapse
It won't work to flash full firmware in TWRP, so far the only way is using fastboot with phone connected to a computer in bootloader (unlocked) mode. Unzip firmware into your fastboot/ADB folder and also the batch file available in this thread, then run the batch file.
Yes this will reset/wipe your phone (except for SD) so backup your data first, and it will be like when you first bought it. You can reinstall TWRP and then Magisk, but boot to system first and set things up including enabling USB debugging setting in developer options again.
I am going to try and update now as the notifications are much too annoying.
Moto G7 Plus - lake Stock rom / firmware download here
NesNol said:
Where can I find the stock rom?
Nes.
Click to expand...
Click to collapse
Moto G7 Plus - lake
Download the Moto G7 Plus - lake stock firmware according to the Country/region/retail/carrier for example US Retail > T-Mobile, Verizon or Amazon, and everything is flashed through fastboot mode
XT1965-2 > https://boycracked.com/2019/02/11/official-motorola-moto-g7-plus-xt1965-2-stock-rom/
XT1965-3 > https://boycracked.com/2019/02/11/official-motorola-moto-g7-plus-xt1965-3-stock-rom/
XT1965-4 > https://boycracked.com/2019/02/11/official-motorola-moto-g7-plus-xt1965-4-stock-rom/
XT1965-6 > https://boycracked.com/2019/07/26/official-motorola-moto-g7-plus-xt1965-6-lake_retcn-stock-rom/
XT1965-9 > https://boycracked.com/2019/07/26/official-motorola-moto-g7-plus-xt1965-9-lake-stock-rom/
XT1965-T > https://boycracked.com/2019/07/26/o...-g7-plus-xt1965-t-lake-us-t-mobile-stock-rom/
Remove the line
'fastboot erase userdata'
from the flashROM.bat file and it won't factory reset. It will act like an upgrade.
Sent from my Moto Z (2) using XDA Labs
vickbuitenzorg said:
Moto G7 Plus - lake
Download the Moto G7 Plus - lake stock firmware according to the Country/region/retail/carrier for example US Retail > T-Mobile, Verizon or Amazon, and everything is flashed through fastboot mode
Click to expand...
Click to collapse
Can I use a different retail code than current stock? My phone is XT1965-2, PPW29.98-28, RETLA. The system reminders are all in Spanish. Could I update to PPW29.98-66, EEGB (UK English) without a problem?
Also, if this is possible, could I update by removing the 'fastboot erase userdata' line from the BAT file, or, due to the language change, would I need to leave that line and do a factory reset?

Categories

Resources