Related
i Was on JB V20A and i installed the root and the CWM and try to put cwm. to check if bootloader was still locked well it does.
and now im stock on L9 Security error.
i can enter on S/W and tryin using the "UpTestEX_mod2_marwin" the Window enabler and the Http.exe to flash it but.
i try phone mode CS_emergency and emergency but when it start to check the phone it stuck on 15% and i can turn on the phone (thats the way i used to bypass the 15% and get with the instalation)
so what now? i can enter on S/W and Recovery Mode LG (This mode is for data backip at service center. after reboting press power key to keep using phone), still can do hard reset pressing volumen less home and power but nothing happen keep with the error.
i know while the phone turn on there's a solution.
my phone is L9 p768g
just don't view the post and ignore. :/
TY for all the view and the 900000 helps. nvm i solved ty to my fb L9 friends so... jodan
Jctatis said:
TY for all the view and the 900000 helps. nvm i solved ty to my fb L9 friends so... jodan
Click to expand...
Click to collapse
I have the same situation, may I know what your solution is?
twinwoods said:
I have the same situation, may I know what your solution is?
Click to expand...
Click to collapse
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
It works!!
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers:
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK , the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
Thank you so much. Yes my P769 BOOTLOADER definitely is locked and I can't even root it with all methods provided in xda, I use exactly your method to get my L9 back to life -- although I have to flash it back to original stock but at least it's BACK! Thank you so much. I saw some other people have the same issue but they can't make it work, hopefully your answer shed the light to ALL!
security error just use the lg pc suite and remove the lines or the host put recover via recovery and put your imei and it will start to download the stock Rom
send from cursed G-P768g 4.1.2. Panamà
grupo Facebook L9 latino América: https://m.facebook.com/groups/54638...ity&actorid=1381295152&__user=100001612362905
Thank you soo much!!! you seriously saved me.
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
I tried this method and the offline kdz method and here is the trouble I am having.
1. With this method I do everything perfect the device shows up for a couple seconds then it disappears so I cannot go any further.
2. With the offline fix I followed the OP to the letter and when I get to the part where I click on "normal web upgrade" I open it and start the upgrade as stated in the OP and nothing. I get the retry or cancel internet warning and ignore or close it and it will not even try pushing the file.
Anyway I have tried 2 different machines to no avail I am wondering if anyone has had a similar problem and fixed it?
Sent from my GT-I9505G using Tapatalk 2
Didn't work for me! But I tried another method and that saved me from a lot of steps.
Just install the driver and the latest LGMobile Support Tool
Start your phone in Software upgrade mode... Power + Vol up
In the LGMobile Support Tool click on Options and then Upgrade Recovery
Put your IMEI in the option that pops up
Wait for the miracle!
It worked for me ... NO MORE LG SECURITY ERROR
MJHawaii said:
I tried this method and the offline kdz method and here is the trouble I am having.
1. With this method I do everything perfect the device shows up for a couple seconds then it disappears so I cannot go any further.
2. With the offline fix I followed the OP to the letter and when I get to the part where I click on "normal web upgrade" I open it and start the upgrade as stated in the OP and nothing. I get the retry or cancel internet warning and ignore or close it and it will not even try pushing the file.
Anyway I have tried 2 different machines to no avail I am wondering if anyone has had a similar problem and fixed it?
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Fixed my phone too. I removed lookout permanently and my phone stopped functioning, so I did the method u said and worked great, I got scared but it worked. Lookout is installed again, I can root again and uproot if I want, it works great again. I recommend this method to all
Sent from my LG-P769 using xda app-developers app
it worked! thanks!
the easiest!!
Owadel said:
Didn't work for me! But I tried another method and that saved me from a lot of steps.
Just install the driver and the latest LGMobile Support Tool
Start your phone in Software upgrade mode... Power + Vol up
In the LGMobile Support Tool click on Options and then Upgrade Recovery
Put your IMEI in the option that pops up
Wait for the miracle!
It worked for me ... NO MORE LG SECURITY ERROR
Click to expand...
Click to collapse
i think this is the easiest method to get back to your "last working condition".. i mean nothng got deleted, nothng chnged.. i'm happy to get rid of the "security error" condition!! thanks a lot
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
cant install fastboot drivers windows 10
Recently while flashing alpha version of MIUI marshmallow on my Mi 4w, my phone got completely bricked. Complete brick in the sense, it won't turn on, neither charge nor show any led indication. This guide should work on other phones also.Let's start:-
1) Although it seems like your phone wont turn on, your phone is actually working, it's just it wont show anything on the screen(no display).
Make sure your phone is charged properly(it will charge even if the led doesn't show any indication).
2) Download and install Mi flash tool and then Fastboot file of your device. http://en.miui.com/a-234.html
3) Unzip the fastboot image, a folder containing flash all.bat should appear if not, extract the extracted file again. Winrar should work fine.
4) Now open Mi flash tool(as administrator) and select the fastboot folder from Mi flash using browse option and also select the proper fastboot script according to need.
Note: Flash_all.bat will completely erase your internal storage.
5) Now press volume down(-) and power key to enter into fastboot. Note: it won't show any visual whatsoever but it'll work.
6) Connect your phone to your pc. It should show various flash devices connected to your computer and those devices may continuosly connect and disconnect. If not it'll show QHUSUB_BULK install the driver using device manager.
7) On Mi flash tool, some device name should show on the devices list if not click refresh and try reconnecting the device. Note: If you dont have proper drivers installed on your pc, this procedure won't work.
8) Finally click on flash and flashing will start. It'll take some time. Once done it'll show operation completed successfully.
9) Finally boot your device using power key.
Brick has received QHSUSB_BULK simple. This is the normal and regular encounter. Hardbrick, you must check point.
2ConHeo said:
Brick has received QHSUSB_BULK simple. This is the normal and regular encounter. Hardbrick, you must check point.
Click to expand...
Click to collapse
who said so?
tested and working
that normal check point is a pain in ass to execute in the first place
Thanks a ton.....It helped a lot
thank u...
thank
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
hammer77 said:
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
Click to expand...
Click to collapse
did you solve the problem ?
Rajdip said:
Recently while flashing alpha version of MIUI marshmallow on my Mi 4w, my phone got completely bricked. Complete brick in the sense, it won't turn on, neither charge nor show any led indication. This guide should work on other phones also.Let's start:-
1) Although it seems like your phone wont turn on, your phone is actually working, it's just it wont show anything on the screen(no display).
Make sure your phone is charged properly(it will charge even if the led doesn't show any indication).
2) Download and install Mi flash tool and then Fastboot file of your device. http://en.miui.com/a-234.html
3) Unzip the fastboot image, a folder containing flash all.bat should appear if not, extract the extracted file again. Winrar should work fine.
4) Now open Mi flash tool(as administrator) and select the fastboot folder from Mi flash using browse option and also select the proper fastboot script according to need.
Note: Flash_all.bat will completely erase your internal storage.
5) Now press volume down(-) and power key to enter into fastboot. Note: it won't show any visual whatsoever but it'll work.
6) Connect your phone to your pc. It should show various flash devices connected to your computer and those devices may continuosly connect and disconnect. If not it'll show QHUSUB_BULK install the driver using device manager.
7) On Mi flash tool, some device name should show on the devices list if not click refresh and try reconnecting the device. Note: If you dont have proper drivers installed on your pc, this procedure won't work.
8) Finally click on flash and flashing will start. It'll take some time. Once done it'll show operation completed successfully.
9) Finally boot your device using power key.
Click to expand...
Click to collapse
Link not working.
Using another mi flash tool also get nothing. How do I know I get into fastboot?
Already pressed volume down and power button but nothing happened. And checking fastboot devices nothing comes up. Also in mi flash tool nothing.
Well, i've flashed the ftf file downloaded directly from xperifirm {E2306_26.3.A.0.131_R2C_Customized GEL_1294-3902}
-update-
some mysterious, magical stuff hapened and i entered fastbootmode
can boot recovery and boot.img from fastboot and now everything is fine
<3
thanks everyone
then, i've try to install root (following a tutorial for this device and this comp.) but i could not enter to FASTBOOT MODE
try using:
- (vol+) + (plug the phone)
-(power btn) + (vol+) + (plug the phone)
-(power btn) + (vol+) + (vol-) + (plug the device)
and the only thing that happened is: -Vibrate + sony logo ---> normal boot
----
Then i try to enter fastboot using the adb command {ADB REBOOT-BOOTLOADER}
but it just reboot normally (sony logo and then start normally)
[[ADB do recognize my device and all drivers were properly installed; but can't enter to fastboot mode]]
---
I've try to reflash my device again, but then i couldn't be able to enter to flashmode
{ with the device off; press vol- and then connect to usb}
after several attempts using - [(power btn) + (vol-)] i entered flashmode and reflash my device...
----
then i activate dev mode: [usb debuggin and OEM UNLOCK]
and try to get to fastboot mode, but the same results...
i got my device recognized by {ADB DEVICES}
but can't get fastboot
-----
Then the user who's helping me told me to reflash using this config
[in excludes section check all except AMSS_FSG, AMS_FS1, AMS_FS2,BOOT DELIVERY, KERNEL. Don't check anything else.]
But i can't get flashmode now... i try all the combinations, try in ubuntu 16, and windows 10... but nothing
the device starts normally nothing wrong.... except well, i can't enter any -mode- now...
any help?
Thanks
try enable usb debugging. go to setting, about phone, then scroll to build number. tap it repeadly till developer option appear on setting. set enable usb debugging there. and try flash it again.
I can't get anything to start!
~~~~
...Well said:
]
---
~~~~I've try to reflash my device again, but then i couldn't be able to enter to flashmode
~~~~{ with the device off; press vol- and then connect to usb}
~~~~after several attempts using - [(power btn) + (vol-)] i entered flashmode and reflash my device...
----
~~~~then i activate dev mode: [usb debuggin and OEM UNLOCK]
~~~and try to get to fastboot mode, but the same results...
~~~~i got my device recognized by {ADB DEVICES}
~~~~but can't get fastboot
-----
.~~~~.. nothing wrong.... except well, i can't enter any -mode- now..
~~~~any help?
~~~~Thanks
Click to expand...
Click to collapse
[~~~~QUOTE=shouqinz;67837866]try enable usb debugging. go to setting, about phone, then scroll to build number. tap it repeadly till ~~~~developer option appear on setting. set enable usb debugging there. and try flash it again.[/QUOTE]
Girlfriend tried to update her Sony Aqua M4 e2306...
she says that the boot loader was unlocked, and she installed the twrp update... and the root check came back rooted.... she powered off the phone and put it on a charger. ...
a few hours later she tried to restart it and only got the Sony Xperia screen then reboot loop.
I've spent 2 days reading everything that i can find and trying various solutions but most won't work because it won't stay connected long enough to use companion, adb, fastboot, bootloader, etc. When the devices is seen by pc it is only for a moment and comes up as a generic MTP device or a hard drive i can't open.
I can get the occasional green or blue lights and sometimes a generic battery symbol by powering off and pressing + or - with power, but never get a recovery or boot load screen... only alternating "sony Xperia" and darkness
also, Emily won't update.
I've tried multiple solutions using different versions of SDK, ADB, sony and xperia Companion, fastboot, bootloader, odin, pwm, and more on multiple machines from XP to Win10, but nothing seems to even make a dent!
I've removed the back and disconnected the battery for 2 hours and am currently trying to research a more physical hack/repair using riff jtag.
i see many people with "boot loop" issue , but no one seems to follow through and say how to get out if you don't have the option of booting to anything....
merwinaleman said:
Well, i've flashed the ftf file downloaded directly from xperifirm {E2306_26.3.A.0.131_R2C_Customized GEL_1294-3902}
then, i've try to install root (following a tutorial for this device and this comp.) but i could not enter to FASTBOOT MODE
try using:
- (vol+) + (plug the phone)
-(power btn) + (vol+) + (plug the phone)
-(power btn) + (vol+) + (vol-) + (plug the device)
and the only thing that happened is: -Vibrate + sony logo ---> normal boot
----
Then i try to enter fastboot using the adb command {ADB REBOOT-BOOTLOADER}
but it just reboot normally (sony logo and then start normally)
[[ADB do recognize my device and all drivers were properly installed; but can't enter to fastboot mode]]
---
I've try to reflash my device again, but then i couldn't be able to enter to flashmode
{ with the device off; press vol- and then connect to usb}
after several attempts using - [(power btn) + (vol-)] i entered flashmode and reflash my device...
----
then i activate dev mode: [usb debuggin and OEM UNLOCK]
and try to get to fastboot mode, but the same results...
i got my device recognized by {ADB DEVICES}
but can't get fastboot
-----
Then the user who's helping me told me to reflash using this config
[in excludes section check all except AMSS_FSG, AMS_FS1, AMS_FS2,BOOT DELIVERY, KERNEL. Don't check anything else.]
But i can't get flashmode now... i try all the combinations, try in ubuntu 16, and windows 10... but nothing
the device starts normally nothing wrong.... except well, i can't enter any -mode- now...
any help?
Thanks
Click to expand...
Click to collapse
did you flashed hole ftf using flashtool or only the mencioned partitions above?
PiSpecialist said:
did you flashed hole ftf using flashtool or only the mencioned partitions above?
Click to expand...
Click to collapse
I still can't enter any-mode, so i haven't flash any ftf
me too
merwinaleman said:
I still can't enter any-mode, so i haven't flash any ftf
Click to expand...
Click to collapse
Same Here - is there no-one willing to help?!?
anyone know how to physically cause a device to self test, or reload defaults, ....or.... boot from sd by shorting a pin OR SOMETHING???
grrr - help:crying:
well... a little progress after 100s of reboot attempts!
i see a HD in the Device manager.
I can't access the disk, but it isn't constantly rebooting..
any one have a suggestion for my next move?
Error 7/24/2016 8:40:41 AM DeviceSetupManager 121 None
Device USBSTOR\Disk&Ven_SONY&Prod_Mass_storage&Rev_0310\YT9115VK6R&0 was configured.
Driver Name: disk.inf
Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}
Driver Date: 06/21/2006
Driver Version: 10.0.10586.0
Driver Provider: Microsoft
Driver Section: disk_install.NT
Driver Rank: 0xFF0006
Matching Device Id: GenDisk
Outranked Drivers: disk.inf:GenDisk:00FF2002
Device Updated: false
Parent Device: USB\VID_0FCE&PID_E1AD\YT9115VK6R
...still need help....
-update-
some mysterious, magical stuff hapened and i entered fastbootmode
can boot recovery and boot.img from fastboot and now everything is fine
<3
thanks everyone
merwinaleman said:
-update-
some mysterious, magical stuff hapened and i entered fastbootmode
can boot recovery and boot.img from fastboot and now everything is fine
<3
thanks everyone
Click to expand...
Click to collapse
dude... PLEASE tell me what mysterious, magical stuff happened?!?!!?!?!? I've been having exactly your issue for days now and can't get past it!!! Please
Ugh. I'm having the same problem. Magical stuff isn't very helpful :/
Boot loop
trechurch said:
~~~~
[~~~~QUOTE=shouqinz;67837866]try enable usb debugging. go to setting, about phone, then scroll to build number. tap it repeadly till ~~~~developer option appear on setting. set enable usb debugging there. and try flash it again.
Click to expand...
Click to collapse
Girlfriend tried to update her Sony Aqua M4 e2306...
she says that the boot loader was unlocked, and she installed the twrp update... and the root check came back rooted.... she powered off the phone and put it on a charger. ...
a few hours later she tried to restart it and only got the Sony Xperia screen then reboot loop.
I've spent 2 days reading everything that i can find and trying various solutions but most won't work because it won't stay connected long enough to use companion, adb, fastboot, bootloader, etc. When the devices is seen by pc it is only for a moment and comes up as a generic MTP device or a hard drive i can't open.
I can get the occasional green or blue lights and sometimes a generic battery symbol by powering off and pressing + or - with power, but never get a recovery or boot load screen... only alternating "sony Xperia" and darkness
also, Emily won't update.
I've tried multiple solutions using different versions of SDK, ADB, sony and xperia Companion, fastboot, bootloader, odin, pwm, and more on multiple machines from XP to Win10, but nothing seems to even make a dent!
I've removed the back and disconnected the battery for 2 hours and am currently trying to research a more physical hack/repair using riff jtag.
i see many people with "boot loop" issue , but no one seems to follow through and say how to get out if you don't have the option of booting to anything....[/QUOTE]
I have the same issue. I have an unlocked bootloader and booted with boot.img. everything was fine for a day or two, and when I started to factory reset my phone it is causing bootloop issues. sony logo and black screen. It never appears on my computer when connected to use adb. Any idea on how to fix this?
My mob is not able to flsh the stock rom......der s a error showing cannot open bundle....help me out plz
When i do VolumeUp & connect my phone it connects to windows with blue led on phone and after ~6 seconds it just disconnects and shows battery charging thing
Try this, jesus bless you
merwinaleman said:
Well, i've flashed the ftf file downloaded directly from xperifirm {E2306_26.3.A.0.131_R2C_Customized GEL_1294-3902}
-update-
some mysterious, magical stuff hapened and i entered fastbootmode
can boot recovery and boot.img from fastboot and now everything is fine
<3
thanks everyone
then, i've try to install root (following a tutorial for this device and this comp.) but i could not enter to FASTBOOT MODE
try using:
- (vol+) + (plug the phone)
-(power btn) + (vol+) + (plug the phone)
-(power btn) + (vol+) + (vol-) + (plug the device)
and the only thing that happened is: -Vibrate + sony logo ---> normal boot
----
Then i try to enter fastboot using the adb command {ADB REBOOT-BOOTLOADER}
but it just reboot normally (sony logo and then start normally)
[[ADB do recognize my device and all drivers were properly installed; but can't enter to fastboot mode]]
---
I've try to reflash my device again, but then i couldn't be able to enter to flashmode
{ with the device off; press vol- and then connect to usb}
after several attempts using - [(power btn) + (vol-)] i entered flashmode and reflash my device...
----
then i activate dev mode: [usb debuggin and OEM UNLOCK]
and try to get to fastboot mode, but the same results...
i got my device recognized by {ADB DEVICES}
but can't get fastboot
-----
Then the user who's helping me told me to reflash using this config
[in excludes section check all except AMSS_FSG, AMS_FS1, AMS_FS2,BOOT DELIVERY, KERNEL. Don't check anything else.]
But i can't get flashmode now... i try all the combinations, try in ubuntu 16, and windows 10... but nothing
the device starts normally nothing wrong.... except well, i can't enter any -mode- now...
any help?
Thanks
Click to expand...
Click to collapse
1. Turn off OEM Unlock
2. Keep USB Debugging on
3. Enter Fastboot mode
4. Done
5. Jesus Bless You
Thymue said:
When i do VolumeUp & connect my phone it connects to windows with blue led on phone and after ~6 seconds it just disconnects and shows battery charging thing
Click to expand...
Click to collapse
I'm having the same issue.
Anoyone knows how to fix? Maybe is a problem of the cable?
PD: Tested with official cabled and turning Off OEM unlock and still the same.
iFlashed said:
I'm having the same issue.
Anoyone knows how to fix? Maybe is a problem of the cable?
PD: Tested with official cabled and turning Off OEM unlock and still the same.
Click to expand...
Click to collapse
also for me :´(
Thales720 said:
also for me :´(
Click to expand...
Click to collapse
Not sure what your problem is exactly but it is most likely a problem with the cable or the s1 driver's(if your using window's?) one or the other ,
However i need to point out that you must have your OEM lock at the SWITCHED ON position(allow the device to be oem unlocked) or you will trip the frp at the next reboot and will have to reflash your firmware unnecessarily , so to sum up Oem unlock at the switched on position
Hi7m3up said:
Not sure what your problem is exactly but it is most likely a problem with the cable or the s1 driver's(if your using window's?) one or the other ,
However i need to point out that you must have your OEM lock at the SWITCHED ON position(allow the device to be oem unlocked) or you will trip the frp at the next reboot and will have to reflash your firmware unnecessarily , so to sum up Oem unlock at the switched on position
Click to expand...
Click to collapse
the drivers are all installed correctly, I tried doing this with the OEM off and on and it did not work
none of the methods works, adb does normal boot
recovery reboot (and other apps) crash or boot normal too
volume (+) and power button only makes the phone vibrate (and sometimes the Sony logo appears)
I can't stress to you enough that Enable Oem need's to be on the "on position" so switch it on (allow the device to be oem unlocked)and leave it alone it's nothing to do with you not being able to get to fastboot. If you trip the frp on your phone you will not be pleased.
with that said with your phone switched on and USB DEBUGGING SWITCHED ON plug into your usb on computer open a command window and input the following command- adb reboot bootloader you will now see your blue light on the phone this means your sony is now ready for you to flash a custom recovery (assuming you have unlocked your bootloader ?)
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.
Generic Disclaimer: By doing any of the process listed below you accept complete responsibility over any of your actions, I will not be responsible if you end up causing hard brick, data loss or any kind of loss to your personal property.
Hii XDA fellows,
So I have seen many people asking for noob friendly guide to restore original oxygen os firmware or basically unbrick device. There are several thread on this already but trust me I have tried them all and in my case I had to use my own brain. So I have compiled a noob friendly guide which I,myself have used to unbrick my device.
small warning this will wipe all of your data.
Firstly I wants to thank Some_Random_Username for bringing up MSM Unbrick tool for OnePlus Nord. His guide to unrick nord is also fairly good enough but in my case I was stuck in bootloop after installing a rom. My phone was not even booting to Qualcomm EDL Mode so that I can use MSM Tool.
Lets start with pre-requisites:
You must have unlocked bootloader.
Original Oneplus Type - C cable.
Windows PC.
ADB debugging turned on your phone.
Firstly Switch off your device, which I think most of you have already have as the device is bricked but in case your phone is stuck in bootloop or recovery or bootloader menu itself then try holding down voume up button and power button together hold them down till you get heptic feedback and screen goes off. Let it be cool down for about a minute.
Now Setup your PC:
Download MSM tool to from this guide : Click here
Setup adb environment in your PC if you havent already setup follow this guide
Download Qualcomm EDL drivers from here: Click here
Now download Unofficial TWRP recovery by Mauronofrio from here
On your PC right click on start menu icon and start Windows Powershell(Admin) and type this command bcdedit /set testsigning on This will turn off driver signature verifications on windows you will be required to restart your pc now after you restart your pc will boot into test mode and you'll see a watermark stating the same in bottom left of your desktop. Worry not we will undo this after we have finished restoring.
install Qualcomm EDL drivers by running the setup listed above.
Unzip MSMTool there you will see a file named MsmDownloadTool V4.0.exe run it, it'll take some time but after you see a pop up asking for user type user name and password, Select other as user type and leave other stuffs blank as it is and click next.
In the next window, In the target button select O2 while using global tool or India while using indian tool or EU when using european tool.
Now you have to boot into Qualcomm Emergency Download Mode
You can do this in several diffrent ways but one I am listing here is recommended :
Boot into fastboot/bootloader mode by pressing and holding Volume up, Volume down and power button together when you see a Menu pop up on your screen you can let go all the fingers at once.
Now connect your phone to your PC and go to that folder where TWRP recovery is located. Hold Shift button and Right click inside that folder you'll see an option "Open powershell window here click on it. In the powershell window type
fastboot devices and press enter your device will be listed as fastboot devices in powershell window. Now type
fastboot boot twrp1.img press enter
your device will boot up in TWRP recovery in twrp recovery go to reboot section and select Edl, This will boot your phone Edl mode your screen will go off as soon as it happens in the MSM tool window you'll see a device listed as com3/com5/com7.
Click on start button the restoration process will begin. Wait for about 400 secs and your device will automatically boot up.
Voila you've successfully unbricked your phone.
If you want to exit from Driver test mode on your pc simply start a powershell window with admin rights and type
bcdedit /set testsigning off
and restart your PC.
So first off all i want to say thanks for this guide.
So , i have a problem with my phone getting reconized by my pcs, so, my Phone just works fine but i want to restore it to stock, i'm using aospex 8.3.
Since a few days my phone dosnt get reconzied by my pc, i've tried windows and linux, both installations cant find my phone, i tried diffrent pc's,usb cables, driver, new installations of windows and linux mint, other phones dont have this problem, tried resetting , everything, do you have a idea what i could try or could it be just my phone port thats damaged and cant transfer data anymore, if anyone has an idea i would really be happy about an answer , thanks!
peppanzer said:
So first off all i want to say thanks for this guide.
So , i have a problem with my phone getting reconized by my pcs, so, my Phone just works fine but i want to restore it to stock, i'm using aospex 8.3.
Since a few days my phone dosnt get reconzied by my pc, i've tried windows and linux, both installations cant find my phone, i tried diffrent pc's,usb cables, driver, new installations of windows and linux mint, other phones dont have this problem, tried resetting , everything, do you have a idea what i could try or could it be just my phone port thats damaged and cant transfer data anymore, if anyone has an idea i would really be happy about an answer , thank
Click to expand...
Click to collapse
Seems like it's a software issue probably a bug in your rom rich out to the developer he might help you, as you have tried both with Linux and windows i don't think it's a driver issue, it could be an issue with the hardware also but chances are pretty low for this to happen. Try flashing other roms if you have backup of your phone, use orange fox recovery it has an option of taking nandroid backup.
IamAlok said:
Seems like it's a software issue probably a bug in your rom rich out to the developer he might help you, as you have tried both with Linux and windows i don't think it's a driver issue, it could be an issue with the hardware also but chances are pretty low for this to happen. Try flashing other roms if you have backup of your phone, use orange fox recovery it has an option of taking nandroid backup.
Click to expand...
Click to collapse
the thing is that i cant flash other roms, my phone dosn't gets recognized in fastboot, recovery and edl, so with the aex recovery installed i have no chance to change the rom without a pc, reached out to the dev but seems i'm the only person with the proplem, but thanks for helping.