Why does it always say "Conditional call forwarding active" when I make any call?
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
I am on Three and I get the same message although my S2 was purchased from O2 then rooted. I have not seen any other reports about this but the message has not bothered me.
I have the same message. Ave tried several hings without success, however since it really does nothing, I am starting to get use to it. But if someone knows how to solve it please let us know
voice mail
Hi guys i have this to but it only started when i activated my voicemail so i think its down to the voicemail
e.g if your on the phone and someone else calls they are placed forward to your voice mail ???
hope this helps
Hey there guys, thanks for the replies so far, glad to hear others are experiencing this annoying problem. I seem to have had this since rooting it, originally T-Mobile though I am 99% it was never "locked" to the network for some reason as I mentioned as I have never had to enter the 00000000 code, which the free ChainFire sim app gave me (seems like it means it is unlocked already???). The guys on the 3 helpline were giving me loads of codes which weren't of any help, and telling me about what options I could fiddle around with, but I had tried all of these to no avail.
Are people also getting the MMI message I mentioned in my original post, whenever they enter # codes in the dialer? It seems to me that both of these problems started at the same time (this error message and the forwarding issue - I am sure they are linked). It means, for example, I probably won't be able to set up a speed dial because of it, nor will I be able to use the "secret codes" as mentioned in the dedicated thread of the same name on this site.
Why is it a problem for some and not for the majority of people, we must have something in common which we have done with our phones which has caused this?
I really hope someone can sort this annoying problem out.
It's normal. "Call Forwarding Active" is displayed when all calls are forwarded. "Conditional Call Forwarding Active" shows when forward when busy, forward when unanswered, or forward when unreachable is selected. To make the message go away you'd have to disable the three forwarding options in their settings. The pre-populated number is always your carrier voicemail (read from the SIM) or Google Voice.
BarryH_GEG said:
It's normal. "Call Forwarding Active" is displayed when all calls are forwarded. "Conditional Call Forwarding Active" shows when forward when busy, forward when unanswered, or forward when unreachable is selected. To make the message go away you'd have to disable the three forwarding options in their settings. The pre-populated number is always your carrier voicemail (read from the SIM) or Google Voice.
Click to expand...
Click to collapse
Cheers for the reply Barry, yeah I expect it is normal but the thing is I cannot change these settings, my phone won't let me as an error comes up. I know it's not a major problem, just a bit annoying I can't get it to go away. I can't disable those three things, I tried a few times already.
Plus, I constantly get the MMI error message, which I mentioned before, seems a bit of a coincidence how these problems started the same time. I can't enter the majority of "#" codes into the dialer, it always says "USSD Running" or something along those lines and then produces the message like 2 seconds later.
Any ideas? Thanks so far for the advice
I have this problem but unlike all others I cannot make any calls on account of it. When I try to disable call forwarding I get an error msg saying it's not supported by the operator.
There HAS to be a way to fix this. I cannot make any calls or use 3G.
Try this
menu-call-additional setting-select network default...
It work with my sgs2.
On the Galaxy S2 if you go to: settings-call-call settings-call forwarding-voice call forwarding -- You will most likely see that for unanswered or unreachable calls it's not disabled because it forwards it to your voicemail, that's why it says conditional call forwarding is active. If you disable all options you won't get the message but then unanswered calls won't go to voicemail.Hope that helps.
Satish
dynamicbot said:
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
Click to expand...
Click to collapse
Its just simple, Just take out ur sim card put it will some other mobile and cancle all diverts....and then put it back to ur mobile again and then check out wat happned....
Thanks
---------- Post added at 01:41 PM ---------- Previous post was at 01:36 PM ----------
dynamicbot said:
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
Click to expand...
Click to collapse
Just simple take out your sim card and put in some other mobile and cancel all divert and then put it back to ur mobile and check out wat happened ....
s_rajkotia said:
Its just simple, Just take out ur sim card put it will some other mobile and cancle all diverts....and then put it back to ur mobile again and then check out wat happned....
Click to expand...
Click to collapse
you realise thats almost a year old? Check the dates on threads before you post
ADMIN EDIT: True, but it is a current issue for some people so it's still valid to answer the question.
Doesn't work
My phone drops every call, even with SIM cards from different countries and in all conditions. Thinking this call forwarding might have something to do with it, I tried to deactivate it, first through the settings -- no luck -- than by reformatting the phone. Nothing, cannot get rid of it because it says it is set by the 2 different phone companies I use.
I don't mind the message but when I call someone, I can hear that the call is being sent somewhere, there is a 1st ring, then it rings the other phone. Does this have to do with call forwarding? Can it be interrupting the phone signal and causing the call to drop ?
I have also removed both the Turkcell and Telefonica SIM cards, put them into another unlocked phone and tried to cancel but as soon as I put them back, the message returns and my calls drop.
Im also getting this error when I updated to 4.1.2 and used galaxy s2 sim unlock
Has nothing to do with call forwarding !!!
The Message worked on all AT&T cell phones, since i can remember,. i been using go phones since 06..... and they all had this message when right after the number was just dialed, right after pushing the green phone icon button to dial it , right after entering the number to be dialed on the keypad.
I have found this message on LG Cell Phone 500 CU series... and all my other phones as well...
IT is NOT a CALL FORWARDING ISSUE>.. because i had worked on that for awhile myself...
IT is a Carrier Issue I believe.
and it doesnt happen ever single time , just on certain days . not sure, why... but perhaps, call your carrier and ask them what type of phone they have your phone listed as.
Then tell them the model and make u have. that might change things... Cell phone carriers know how to mess with your phone and break it too...
so if ur having issues with messaging, call forwarding, it just may be the settings the carrier has you listed or down for.
blah.
anyways. yes it is annoying, i just got a new phone, samsung galaxy express. it is starting to happen too on this one. but had it for a few days and it never showed up till about 2 days later.
I thing it is perfectly normal for your device to display this message, I'm central america and mine also says the same thing anytime i make a call "Conditional Call Forwarding Active. However since I have a prepaid or pay as you go plan with my carrier and whenever I have no more credits to make calls i get the message "Calling Barring Enabled". I guess it has something to do with your carriers settings, it doesn't bother me at all though since I'm already used to it so hope that helps.
Enabling call forwarding for real and then disabling it seems to work
I got the same error also on every version of the stock rom (it used to appear occasionally, though) on my Samsung Galaxy S2 (i9100, without g), in that case going into forwarding settings was enough, because the mobile used to read the current configuration from the network and recognized that there was no forwarding active!
I moved to Cyanogen Mod 10.1.3 / Stable and going into forwarding settings was useless... He was updating with the data from the newtwork, all the forwarding options were disabled but the notification message was still there...
I decided to enable it for real by putting a friend number from the same carrier and then disabling it immediately after, and it solved my problem! Hope it helps!
PS: I'm not sure that enabling the call forwarding is free of charge, just double check with your carrier first!
dynamicbot said:
Hi there, basically I bought a new and sealed T-Mobile branded Samsung Galaxy SII phone from eBay and am using my 3 mobile sim in it.... I assume it wasn't originally locked when I bought it, as I went through the root and unlock method (ChainFire app), and the code was 00000000, and never at any point asked me to enter that code into the system, so hey, my 3 sim seems to work in it.... apart from the fact that for every call I make the message "Conditional call forwarding active" always crops up with a beep to go with it, then after a couple of seconds the call is made. It isn't a major problem as such I don't think, but hell it definitely isn't normal and is quite annoying after spending £400 on this otherwise amazing phone.
I have tried to fiddle with the settings but for some reason I cannot disable any of the call forwarding settings, some sort of error message crops up. I have phoned up the 3 network who I am with three times today and they asked me to enter a few # codes to sort the problem out, but I had no luck, and then they had me factory reset the phone using the option in the settings. I did that, and I still have this problem. I also get the message "Connection problem or invalid MMI" when entering most # codes, this seems to have happened after rooting, though I am not 100% sure if that is the case.
My phone is the Samsung Galaxy S II I900, just to confirm that.
I look forward to hearing from you guys
Click to expand...
Click to collapse
I had the problem. Just solved it. select any one sim. Select settings-call settings-call forwarding-make sure all the options listed therein are disabled. Do this selecting all your sims one by one. The problem will have solved.
anilcsimon said:
I had the problem. Just solved it. select any one sim. Select settings-call settings-call forwarding-make sure all the options listed therein are disabled. Do this selecting all your sims one by one. The problem will have solved.
Click to expand...
Click to collapse
I can't disable the last option (please check the pics)
Sent from my Micromax Canvas 4 A210
Hello,
I also got the similar problem I can't call anyone since 2 days whenever i try to call someone the call drops out and shows the pop up message "Conditional Call Forwarding Active".
I tried to disable call forwarding in call settings but i cant disable the fourth option " Forward Call When Unreachable "
When i try to disable it another pop up message shows up " Unable to deactivate call diverting when phone is Unreachable. Unsupported by operator. "
Please help it is really annoying i can't call anyone.
I use Samsung Galaxy Note 3 Neo
Hi all.
So I have this great SI4G from AT&T that I rooted and unlocked to my network, Rogers. However I've noticed that the 3 conditional call forwarding options are set with (I assume) the previous owner's number. If I try to disable them, or change the number I get an "unsupported" or "unexpected answer" error message.
I can still make and receive calls, but if I miss them, they will not go to my voicemail. Rogers does not support those options so I really don't know how to kill them... Any ideas?
I've seen this around and about the forums, but no solution really...
Thanks!
This is not meant to bump the topic, but I just flashed a new ROM and I still get those settings. This would mean it's stuck in the SIM card... which doesn't make any sense to me.
Anyone?
call rogers tech support, they should be able to help. My best guess.
*sigh* yeah thanks chrisrotolo, I forget to do that too often... and guess what? The forward thingy was a bug actually; they reset my VM and now it works fine. Turns out all the numbers that appeared are the numbers that the network puts in to compensate for these unsupported options.
+1 for me on the duh scale...
ok i got a i717 note and a att striaght talk sim card. I finially got the APN setting that came with the straight talk sim to save. Phone is making calls and messaging but the data services are not working. What am i doing wrong?
If your settings are like the ones in the screenshots I posted, then I would say there is likely problems with data im your area.
my settings are the exact same. no luck
testdummy said:
If your settings are like the ones in the screenshots I posted, then I would say there is likely problems with data im your area.
Click to expand...
Click to collapse
also my carrier says "HOME" in the top left corner. I wonder if this has something to do with it?
Mine displays HOME when I pull down the notifications window and only for a few seconds when in the lock screen. Other than that it doesn't display HOME from what I've noticed. I don't think you have to worry about the what is displayed as the carrier's name. Since you are able to make phone calls and received messages (both SMS and MMS?) and the only thing that is not working is just data, then it's probably something in the phone configuration or a problem in your area. If you haven't done so yet I would recommend contacting Straight Talk.
What symbol, if any, do you have to the left of the signal bar?
I know this probably isn't the case but did your turn Wifi off? If not try turning it on or off and making sure it stays off so you can connect to the data network.
I don't know if you have done so but you could try a factory reset, not sure if this would help.
If none of the above works you could try rooting and flashing the AT&T stock rom to the phone or some other rom. (Consult this recommendation with someone more experienced here on the forums. Personally, I don't see more troubleshooting options.)
If there is no problem with the network and none of the above works then I think your phone may be damaged, unless it used to work perfectly with AT&T. Did you switch from AT&T to Straight Talk or did you buy the buy through ebay or on the street to activate ti with them?
I'm on the latest Energy Stock Rom, and whenever I dock my phone onto my desk dock, I get a message in my Notifications saying "Unlocking UIM card... UIM card is PUK-locked". I tried tapping it, but nothing happens.
Any idea what this is?
Thanks!
Your best bet is calling Tmo and asking them if there's any code they can give you for that.
Double0EK said:
Your best bet is calling Tmo and asking them if there's any code they can give you for that.
Click to expand...
Click to collapse
But I'm never prompted to input any code. Tapping on the notification doesn't do anything either.
That has happened on both my RAZR and then later my Samsung Behold. Call your carrier and they will give you a code. I don't remember why it was asking for it; it somehow just happened. Whatever you do, don't try entering codes to unlock it. A lot of times it limits how many attempts you have and then you're locked out of your phone forever.
---Edit---
Okay, I just re-read that. That's weird that it's not actually prompting you for a pin. Maybe look in the security menu and see if there's anything in there?
[Q] "no sim" error on my other carrier, currently overseas can't make calls.
Hello everyone,
Long time reader first time poster because I have searched for the past 2 days to solve my problem but it is kind of an emergency at this point.
I am currently overseas, last year I was here I was running stock GB and unlocked the simlock by contacting AT&T and getting a code. This year I am upgraded to stock JB but I get a no sim error with my overseas carrier and the phone doesn't ask for code at all. I tried putting in the ATT sim again and that works but can't use it here because its too expensive. I have tried other people's sim cards (total of 3) all of them get no sim error. This tells me the sim lock is still on there but I can't do much since it doesn't ask me for code.
I have also flashed siyah kernel and paranoid rom since coming overseas still no luck. This was mainly because stock JB was horrible.
I tried galaxy s unlock app but won't see my internet connection, I am not sure if it would be able to solve my problem anyway. I can't try the paid version of sim unlock because I can't get it charged to my ATT bill. I heard there is a free version but couldn't find it after searching for hours, seems as the developer wants this to be paid anyway.
I tried choosing multiple carriers under network settings but no luck.
I am sorry if I missed something obvious. Seems like Kies\ATT messed up something while upgrading me to JB
I have contacted ATT to ask if their JB upgrade locking sim is a known problem but all I got was a "are you sure you did it right". I have an unlock code from ATT though, just can't use it because the phone doesn't ask for the code, just says "no sim, emergency calls only"
I have flashed different modems just to see if that would help, nope
I have searched and read every similar thread, I would search more but I really need to solve this quick. Sorry if I missed any details first time posting.
Thanks in advance.
Don't know if this will help since I haven't tried it, but I found this. Maybe this will allow you to enter the unlock code?:
If your Samsung is not asking for an unlock code and it only reads “Network Locked. Emergency calls only” or “Insert correct SIM card” you can use one of these two formulas:
#0111*UNLOCKCODE#
#7465625*638*UNLOCKCODE#
hmm both of them gave me mobile network available error, weird I would guess it wouldn't check for that.
,just to make sure , I just enter these on the keypad and press call right ?
With that type of code, you don't have to press call. If it is supposed to call up a menu or dialog, it will do so when the last digit is entered. If the phone does nothing when the last digit of the code is entered, then it is probably a code that is not recognized by the phone. So I guess those codes don't work for the SGH-I777. I don't know if this is dependent on firmware. I do know that unlock doesn't work the same on Jelly Bean. I've read the unlock methods don't work. See here. I guess you could flash ICS stock plus root and then use one of these.
or... can you call or chat with an AT&T tech support to ask how to apply the code in your situation?
I found a list of a lot of codes, tried some of the ones related to network lock, one of them asked for password, i entered it and it said unlock successful yet still not working. I just rooted to stock gingerbread still no sim error yet ATT worked and sent me a text for international rates.
I just don't know what happened whist upgrading to JB.
I have a similar problem where my unlock code that used to work no longer works. Just out of curiosity, does the Serial # shown by GalaxSimUnlock app match the one listed physically under your battery? I'm not aware of how to check for the serial number other than that app. On mine, I noticed it got zero'ed out, and if my hunch is correct, I think the unlock code recognized by the phone is based on that serial number (among other things), so the one supplied by AT&T won't work anymore. I'll have to get a new number based on that zeroed out serial number or change my serial number somehow.
Sorry I flashed another rom already but I will try to reinstall everything and check later today. Idk if the app works with gingerbread, it should.
Yes, it works with Gingerbread as I was able to use it. I was hoping that if I restored to Gingerbread, my serial number would come back. But no dice. I'm really curious to see what your serial number is.
just tried to check but the app keeps crashing on mine. I tried with anothe unlock app i got undefined under serial.