Hi mates, here you have a new kernel that you can use in the stock roms or stock based roms, to make an improved experience.
Better performance, battery life and personalization.
Characteristics: (This list will be updated)
-Added Govs:
Lionfish
Darkness
Elementalx
Smartmax
Wheatley
Impulse
Lionheart
BioShock
Nebula
Nightmare
Alucard
Conservativex
Despair
-Added IOScheds:
Fiops
Sio
Zen
Noop
Bfq
Sioplus
Tripndroid
-Devfreq govs : (GPU Govs)
Ondemand
TCP Congestions:
-BIC
-CUBIC
-DCTCP
-WESTWOOD (Default)
-HSTCP
-HYBLA
-HTCP
-VEGAS
-VENO
-SCALABLE
-LP
-YEAH
-RENO
-Nfc pay, Pokemon Go support:
Added a hack to cmdline wich makes possible the Nfc pay and POGO with magisk
-Touchboost can be disabled
-Fsync can be disabled
-Added Adrenoboost parameter
Overclocked: Only Advanced Users
-Same that normal kernel but added little Overclocked frequencies
-Little cluster up to 2,26 GHz
-Big cluster up to 2.42Ghz
-GPU up to 729MHz
Not working in this Roms:
-Tars 21s
-Cydras 20s
-Tars 23s beta dev v2 (Not working fingerprint)
Installation:
Flash the zip with TWRP
Uninstallation:
Dirty-flash the rom
Download:
-Kernel(Update 06-05-17)
-Overclocked(16-05-17)
Kernel source
Thanks:
-Special thanks to @GalaticStryder because i have learned many thinks from his work
- @codeworkx and @jrior001 i have also learned many thinks from both of them, and taken some work from them
-All the people who is working on flar2 "Elementalx kernel"
-And all the people who is sharing their knowledge in github
Screenshots:
Tutorials
I have lost root installing this kernel:
You may have installed systemless root, which its also patched in kernel, you only need to reflash magisk(recommended) or other root
PokemonGo and Nfc Pay: (With root)
Flash Magisk and install it from play store, open it and check that its updated, then go to settings in magisk app and check "Magisk Core Only Mode" and "Magisk Hide", reboot the phone and you have both working
Antutu:
-CPU Governor:
Interactive
-GPU Governor:
Msm-adreno-tz
-I/O Sched:
Zen
-Fsync:
Disabled
Battery:
-CPU Governor:
Lionfish
-GPU Governor:
Simple_ondemand
-I/O Sched:
Noop
-Touchboost:
Disabled
What is the best kernel configuration for battery performance and not losing performance. Thank you.
I can not find the information the various GOVS could summarize? Thankful 2x.
Hi @villarleg
Thank you but did not work with Slim6
Bootloop
saraprobe said:
Hi @villarleg
Thank you but did not work with Slim6
Bootloop
Click to expand...
Click to collapse
It says stock Rom or stock based rom
pshrey said:
It says stock Rom or stock based rom
Click to expand...
Click to collapse
yep i've just realised
Great work Master :good:
Many thanks for your hard work on our Le Pro 3
eualex said:
What is the best kernel configuration for battery performance and not losing performance. Thank you.
I can not find the information the various GOVS could summarize? Thankful 2x.
Click to expand...
Click to collapse
Hi mate, here you have a little configuration
https://forum.xda-developers.com/showpost.php?p=72166994&postcount=2
villarleg said:
Hi mate, here you have a little configuration
https://forum.xda-developers.com/showpost.php?p=72166994&postcount=2
Click to expand...
Click to collapse
thanks for listening!
villarleg said:
Hi mate, here you have a little configuration
https://forum.xda-developers.com/showpost.php?p=72166994&postcount=2
Click to expand...
Click to collapse
I don't know why but when I set your configuration and reboot my device, Kernel Adiutor (v9.6.11) is not applying these configurations. When I enter in Kernel Adiutor, nothing has changed
What can I do
bayad said:
I don't know why but when I set your configuration and reboot my device, Kernel Adiutor (v9.6.11) is not applying these configurations. When I enter in Kernel Adiutor, nothing has changed
What can I do
Click to expand...
Click to collapse
If a clean of data and cache of the app doesnt solve the problem, install Ex Kernel Manager, i have no problem with this app.
villarleg said:
If a clean of data and cache of the app doesnt solve the problem, install Ex Kernel Manager, i have no problem with this app.
Click to expand...
Click to collapse
Problem solved :good:
It was only necessary to lock the application in the background in order to leave it active in reboot
bayad said:
Problem solved :good:
It was only necessary to lock the application in the background in order to leave it active in reboot
Click to expand...
Click to collapse
Fine!
Update 05-05-17
Additions:
TCP Congestions:
-BIC
-CUBIC
-DCTCP
-WESTWOOD (Default)
-HSTCP
-HYBLA
-HTCP
-VEGAS
-VENO
-SCALABLE
-LP
-YEAH
Governors:
-Alucard
-ConservativeX
-Nightmare
hi villarleg. thanks for your work. i install the stock rom and after install your kernel with twrp. the divice not start. the devices off
joshi29 said:
hi villarleg. thanks for your work. i install the stock rom and after install your kernel with twrp. the divice not start. the devices off
Click to expand...
Click to collapse
What ROM did you installed?
hi
thanks for your work
anybody try with 20s by cydras?
Hi, thanks for the time you spent on our phone. I am so curious to try this kernel but can I ask you what do you mean exactly by "improving battery"?
I am on 5 :30 / 6 H Maximo of SOT. Does it improve to 7 h or more? And do you have some screen shots of your SOT?
Thank you again.
Inviato dal mio LEX720 utilizzando Tapatalk
fiume97 said:
Hi, thanks for the time you spent on our phone. I am so curious to try this kernel but can I ask you what do you mean exactly by "improving battery"?
I am on 5 :30 / 6 H Maximo of SOT. Does it improve to 7 h or more? And do you have some screen shots of your SOT?
Thank you again.
Inviato dal mio LEX720 utilizzando Tapatalk
Click to expand...
Click to collapse
Well with this changes your Cpu will work more time in low freqs so it will improve battery life, also Noop its the most simple gov and doesnt require the same battery cost than other ioscheds, i cant give you screenshots for battery cause im all day changing the rom and the kernel of my device, but sure other person could give a screenshot
Hi i confirm : no working with 20s cydras.
Shutdown After starting
Related
Hello guys.I have created flashable modules which can be flashed on any stock jb 4.3 rom.I extracted these modules from mrsteves cm11 rom.
These are governors,schedulers and tcp algorithms which can work on stock kernel.I don't know if they work on AOSP roms.I have only tested it on stock 207 and existenze v4.
You can use any app to choose governor and schedulers.But TCP algorithms can only be chosen in Trickstermod app(as far as i know)
Governors*Abyssplug
*Adaptive
*Badass
*SmartassV2
*Intellimm
*Intellidemand2
*Intelliactive
*Powersave
*Lagfree
*Wheatley
*Lionheart
*Conservative
I/O Schedulers*Zen
*Sio
*Bfq
*Fifo
*Fiops
*Row
*Vr
TCP Algorithms*Bic
*Highspeed
*Htcp
*Hybla
*Illinois
*Lp
*Scalable
*Vegas
*Veno
*Westwood
*Yeah
DownloadJust flash it in recovery and reboot
Credits
@MrSteve555 without you,it was not possible sir
Reserved
Very nice, any recomendations?
Bruno_Puzoni said:
Very nice, any recomendations?
Click to expand...
Click to collapse
Right now i'm using intellimm with row and it's smooth.
Already this modules in PureXPERIence rom with zram [emoji14] and set on first boot interactive governor
umair42 said:
Right now i'm using intellimm with row and it's smooth.
Click to expand...
Click to collapse
OK, and are you using any TCP Algorithm?
Bruno_Puzoni said:
OK, and are you using any TCP Algorithm?
Click to expand...
Click to collapse
I haven't changed tcp algorithm.
Can somebody write what is tcp algorithm and what we can earn with change it? Thanks a lot
Add this lines to hw_config.sh
# Load cpufreq limiter
insmod /system/lib/modules/cpufreq_limit.ko
I've installed this and i saw overheating warning on stock (first time) with using smartassv2.. W/o this mod everything works normal
umair42 said:
Right now i'm using intellimm with row and it's smooth.
Click to expand...
Click to collapse
You should also give description about each governor, i/o and other things so that it would be easy for all who download this.
Can you tell me which one is best for battery saving?
can I flash this on APQ8064 (xz, zr, zl, etc)?
vipseifer said:
Can you tell me which one is best for battery saving?
Click to expand...
Click to collapse
Wheatley and Smartassv2. And Powersave governor of course.
akimester said:
Wheatley and Smartassv2. And Powersave governor of course.
Click to expand...
Click to collapse
if you will use powersave you have lags)
Abyssplug causes hard reboot on EXistenZ 4.
Afaik abyssplug requires disabled mpdecision !!
akimester said:
Afaik abyssplug requires disabled mpdecision !!
Click to expand...
Click to collapse
I didn't know that. I'm gonna try with again with mpdecision turned off.
Tried it and it works with kitkat Roms like paranoid, excellent work.
Works well on custom rom jb LBL.
Batterie saving: smartassV2+noop (not much multitaskting)
About:
I started this kernel mainly for myself, but decided to share it with you.
I would like to keep this kernel 'minimal' but I'm open to suggestions or ideas. With minimal I mean mostly improvements to the source, no instable stuff and no bloated options.
My kernel doesn't need any additional apps to configure it, all values are set by the ramdisk. Only if you want to customize stuff you might use an app.
Version and changes:
Current: 0.6
Short changelog: Bug fixes and improvements (also fixed the bug when changing min cpus online would be stuck at input freq)
Features:
- O3 build
- GCC 5.2 (ubertc)
- 3.4.110
- Optimized flags
- Optimized source
- Latest alucard hotplug (enabled at boot)
- Latest Intelliplug
- State notifier
- Bunch of schedulers (tripndroid by default)
- Impulse governor (by default)
- Kcal support
- Voltage control
- Sound control
- Frandom
- Fsync
- ExFat
- Westwood+ congestion control
- CCT Mod included
- Removed screen sharpening
Download:
https://drive.google.com/open?id=0B7XCSgymRoP0VjFEZmtKUzJVSDg
Support:
I would appreciate any kind of support or donation!
Donate
Source:
https://github.com/daeiron/LG_G3_Kernel
thomas1991_12 said:
Started this kernel mainly for myself, but decided to share.
I would like to keep this kernel minimal but I'm open to suggestions or ideas.
Features:
- O3 build with optimized flags and GCC 5.2
- Bunch of schedulers (tripndroid by default)
- Impulse governor by default
- CCT Mod included
- Removed screen sharpening
Download:
https://drive.google.com/open?id=0B7XCSgymRoP0VjFEZmtKUzJVSDg
Source:
https://github.com/daeiron/LG_G3_Kernel
Click to expand...
Click to collapse
I know that this doesn't technically works for a minimal kernel but in the lollipop kernel they had added 500+ comits to improve battery maybe you could port some over
Nice work...
Some favorit settings?
theoverfiend said:
Nice work...
Some favorit settings?
Click to expand...
Click to collapse
I try to configure my kernel so that you don't need to customize anything, so impulse with tripndroid (default) is pretty good.
thomas1991_12 said:
Started this kernel mainly for myself, but decided to share.
I would like to keep this kernel minimal but I'm open to suggestions or ideas.
Features:
- O3 build with optimized flags and GCC 5.2
- Bunch of schedulers (tripndroid by default)
- Impulse governor by default
- CCT Mod included
- Removed screen sharpening
Download:
https://drive.google.com/open?id=0B7XCSgymRoP0VjFEZmtKUzJVSDg
Source:
https://github.com/daeiron/LG_G3_Kernel
Click to expand...
Click to collapse
thank you for sharing your kernel
your kernel supports color changes and increased audio kernel adjutor?
Inviato dal mio LG-D855 utilizzando Tapatalk
Did anyone have a feedback?
Oh new kernel have to try it now!!
i have to say this kernels performance is really good.default settings performance is awesome.buttery smooth.about battery life have to test.thanks for this kernel dude.keep up the good work
I lost root after flash the kernel. Can I re-flash SuperSU?
UPDATE: reflash superSU and sharpening mod to get root again.
I forgot sharpening mod and got security error
no14me said:
I lost root after flash the kernel. Can I re-flash SuperSU?
Click to expand...
Click to collapse
yes u can.flash this kernel.then super su then sharpening mod.it will work out fine.i did the same and it worked for me
Does it have kcal support?
jokerpappu said:
yes u can.flash this kernel.then super su then sharpening mod.it will work out fine.i did the same and it worked for me
Click to expand...
Click to collapse
omg. I forgot sharpening mod and that why I get security error
umair42 said:
Does it have kcal support?
Click to expand...
Click to collapse
no, it doesn't
Add kcal and a sound engine. Also I would reccommend you upload to AFH. Google drive is slow for me. Also once many start downloading the gdrive link might not work later on.
Edit: Flashed it running smoothly. No issues at all (Y)
Flashed it. It's fast, but my phone has insomnia and does not want to sleep.
Maybe due to this, it's a bit hot and battery hungry.
Will try to wipe caches again and report back.
Thanks!
As suggestions, I'd like to have another hotplug (msm) manager and Lionheart governor for the CPU, and maybe reduce gpu minimum speed to 27mhz.
congratulations on this magnificent kernel, could incorporate some overclock CPU and GPU, thanks
Enviado desde mi LG-D855 mediante Tapatalk
Im using this kernel for a day and so far everything is working fine and smooth, IMO maybe is better to keep kernel minimalistick and clean but wery well optimized or make 2 versions 1 tweaked with bunch of sheluders and governors and 1 simple and clean. Either way great job on this.
thanks for the update, im falling in love with this kernel.
I love this kernel too! Its more fluid than stock and battery seems same. Definetely you guys must give a shot.
Thank you for this awesome kernel! Performance is amazing with it and battery life too!
I've a problem, when i flash this kernel over solidkernel only the minimum core chosen is MSM_mpdecision is activated. If i set the minimum to 1, only one core is activated...
Introduction:
Welcome! I've developed ArtxKernel, with the aim to make a great and clean kernels for CM and AOSP ROM's, but this one is for those that don't want to mess with a lot of features, like a Flash and Use Kernel! Battery life its very impressive and this Kernel is the most clean that I've made, so, enjoy it
Click to expand...
Click to collapse
Features:
- CPU Input Boost
- Gov's: Interactive, OnDemand, Conservative, Powersave, Perfomance, Userspace, pegasusq, zzmoove, Alucard and IntelliMM
- Multicore power saving
- Alucard and Bricked hotplugs
- 27Mhz GPU
- Adreno Idler
- FastCharge Support (Updated, faster than ArtxKernel)
- PowerSuspend Mode
- Kcal color control
- Faux sound control
- Fifo, fiops, sio and zen schedulers
- Frandom support
- Async I/O, 37% more perfomance
- Fsync control
- init.d support
- Selinux permissive
- Fixed simple_ondemand GPU Gov
- 2-Way Stereo Call recording Patch
- PVS Level via sysfs
- Boosted min and max screen Brightness (It's safe)
- RAM, GPU and Battery optimizations
- Some Artx Optimizations
SmoothUnlocker:
If you want an extra boost flash it, check MEGA link, but take in consideration that it will make your Battery drain faster in exchange of perfomance and pure Smoothness
Downloads:
----------
MEGA
----------
Spectrum:
Wanna use it with Spectrum App? Then follow this simple steps:
• Download Spectrum Injector HERE (3rd post) Thanks to @frap129
• Flash the Kernel and then Spectrum Injector
• Put my Profile files in spectrum/profiles folder in your internal memory after boot
------
Profiles
------
• You're done, remember that you can change those configs with a text editor
Bugs:
If you see a bug, let me know and I'll be glad to help you and fix it
Social:
Wanna join a Telegram group of this Kernel? If you have any question or you need help, get in!
(let me know if the link is broken )
----------
Telegram Group
----------
Compatible with:
(Thanks to @marcdw and @jlb1959.01)
- Nougat ROM's
- Marshmallow ROM's
- Lollipop ROM's (Not confimed yet)
Thanks to:
cesarandres_8911, savoca, faux123, LineageOS Team, osm0sis, Feinzer
LG, matthewdalex, Andrei F, yarpiin and me
If anyone is missing here PM me
If you like the kernel and want to do a small donation it for sure gonna help me a lot and keep me motivated! :laugh:
Thank you and enjoy it!
XDA:DevDB Information
G3X-Ultimate, Kernel for the LG G3
Contributors
Stayn
Source Code: https://github.com/Artx-II/G3X_Kernel_lge_g3
Kernel Special Features: See above
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2017-07-05
Created 2017-06-28
Last Updated 2017-08-19
Changelog!
Code:
[B]* v3.0[/B]
- Source updated
- Boosted min and max screen brightness (It's safe)
- Added 2-Way Stereo Call Recording Patch
- Added Governors: Alucard & IntelliMM
- PVS Level via SysFs
- RAM, GPU and Battery optimizations
- Some optimizations from Artx Kernel
- Cleaned a lot of code
[B]* v2.0[/B]
- Source updated
- Added Dualsim support
- Added Pegasusq Gov
- Added zzmoove Gov
- Added Alucard and Bricked hotplug
- 27Mhz GPU
- Adreno Idler
- Sound control (Replaces Faux)
- Power Suspend Mode
- Added fifo, fiops, sio and zen schedulers
- Added Frandom
- Kernel Selinux permissive
- Fsync control
- Compiled with updated UberTC
- General optimizations
- Battery improvements
[B]* v1.0[/B]
- Initial release
Smooth as butter, and charging so fast it's almost scary
Thank you
You need a banner for your OP which is called "KernelBae"
Anyway thanks for awesome job and new kernel.
Sent from my LG-D855 using Tapatalk
Stayn said:
Reserved
Click to expand...
Click to collapse
sorry to say but i still cant understand why this kernel when there are ARTX and Light kernels??
and is there any chance that it would work on stock rom ?
mohammadtalha93 said:
sorry to say but i still cant understand why this kernel when there are ARTX and Light kernels??
and is there any chance that it would work on stock rom ?
Click to expand...
Click to collapse
This kernel is more faster than artx and light kernels, I am of those who cannot see a little lag because that bothers me and this kernel keeps my device smooth...
I didn't tested it on stock and I don't think that it will work, anyway, I can try to build custom stock kernel but I think that it's too late now for build to marshmallow
Stayn said:
This kernel is more faster than artx and light kernels, I am of those who cannot see a little lag because that bothers me and this kernel keeps my device smooth...
I didn't tested it on stock and I don't think that it will work, anyway, I can try to build custom stock kernel but I think that it's too late now for build to marshmallow
Click to expand...
Click to collapse
COOL.....but after trying every single custom rom MM or N......i went back to modded Stock rom because of stability and Camera Quality.... and literally i have tried EVERY SINGLE ROM out there.
mohammadtalha93 said:
COOL.....but after trying every single custom rom MM or N......i went back to modded Stock rom because of stability and Camera Quality.... and literally i have tried EVERY SINGLE ROM out there.
Click to expand...
Click to collapse
I cannot use stock based ROMs, it's too much lag for me
Stayn said:
This kernel is more faster than artx and light kernels, I am of those who cannot see a little lag because that bothers me and this kernel keeps my device smooth...
I didn't tested it on stock and I don't think that it will work, anyway, I can try to build custom stock kernel but I think that it's too late now for build to marshmallow
Click to expand...
Click to collapse
Nice too See a New kernel again.. But... You sad its fast er then the other kernel of yours. I'm using the latest LightKernel, so this Ultimate kernel is faster and i want to now if this kernel is better in battery life ?
francois amon said:
Nice too See a New kernel again.. But... You sad its fast er then the other kernel of yours. I'm using the latest LightKernel, so this Ultimate kernel is faster and i want to now if this kernel is better in battery life ?
Click to expand...
Click to collapse
Light and normal kernel has better battery life that depends on how you configure it
Stayn said:
Light and normal kernel has better battery life that depends on how you configure it
Click to expand...
Click to collapse
Allright then You. I will stay with the latest Light Version.
THX for reply
Iv been on this kernel all this morning and so far its great!
PS: Is it possible to add bioshock to this kernel?
Downloaded twice fot f400, both zip corrupted.
khnoizer said:
Downloaded twice fot f400, both zip corrupted.
Click to expand...
Click to collapse
Sorry dude, I re-uploaded it
So, default cpu governor is performance? I hope it doesn't drains battery so much, since I usually prefer to just use the default setting because I believe OP have the best balanced settings there.
khnoizer said:
So, default cpu governor is performance? I hope it doesn't drains battery so much, since I usually prefer to just use the default setting because I believe OP have the best balanced settings there.
Click to expand...
Click to collapse
I don't know why your default gov is perfomance, change ir to interactive, I'll update this kernel soon... I'm a little busy for now on other things
Stayn said:
I don't know why your default gov is perfomance, change ir to interactive, I'll update this kernel soon... I'm a little busy for now on other things
Click to expand...
Click to collapse
Keep your time. You don't have to push an update all days. Let the users use it for a while and then report. One day with this kernel and report it is nothing. The system need time to get one with the kernel settings
G3X is pretty much beta. ArtX is not beta (IMO). If you want a more stable kernel use ArtX until this one gets all the kinks worked out.
Stayn said:
I don't know why your default gov is perfomance, change ir to interactive, I'll update this kernel soon... I'm a little busy for now on other things
Click to expand...
Click to collapse
I think I should also mention that I'm using RR 5.8.3 rom for F400 variant by oadam11, which is also have performance governor by default on its default kernel. Maybe there are something related.
Anyway, take your time, and thank you for your hard work.
EDIT: However, I've tried artxlight 2.1 but its governor wasn't set to performance by default. It was zzmoove.
Hi I have a little problem. When I flash through TWRP I get unsupported device and error 1. My device is d852.
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
If you get bootloop click here
Summary CrazyAquaKernel is a powerfull kernel with a lot super features!
If you got any bug use the report bug tab or press HERE and upload the log,WITHOUT LOGS THERE IS NO BUG!
I m not a magician and i havn't got the device to do it on my own without spend your time.
INDEX
POST 1
-Imprtant info
-Report bug with Logs
-Features
-Dowload link
-Donator
-Credits
POST 2
-Recommended kernel tweaker tools
-Changelogs
POST 3
-Bootloop fix
POST 4
-Zzmoove profiles
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
Google GCC 4.9 Toolchain
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- Freq Limiter
- input boost
- overclock/underclock
IO schedulers:
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Sound Control
- Faux sound
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- Frandom support
- Power Suspend Mode/State
- A lot improvments
- A lot fixes
Find this thread helpful? Hit the Thanks button!
The speed of future releases will be based on thanks. 39k views, 400 downloads and only 19 thanks... I won't be rushing anything.
Feeling extra generous and wanna help me more? Click my name at the top of any post and hit donate or click here the donation button
Download Link CrazyAquaKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=207124
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the Samsung Galaxy S5
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-klte-los
Kernel Special Features:
Version Information
Status: Beta
Created 2017-08-16
Last Updated 2017-08-16
[KERNEL][SM-G900XX][CM13/CM14.1]CrazyAquaKernel v1[16-08-17]
FAQ
Recommended app : Kernel Adiutor
changelogs
v1/16-08-17
- initial release
v2/6-9-17
- rebase kernel with latest los updates
- add faux sound
- google gcc 4.9 toolchain
- many fixes
If you get bootloop or bootloop before samsung screen press volume up+down+power button until device vibrate and fast press power+volume up and device will be boot in recovery,instal your rom(dirty instal not need clean instal) and everything will be good^^.
[KERNEL][SM-G900XX][LOS13/LOS14.1]CrazyAquaKernel v1[16-08-17]
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list.
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve1
reserve2
Thank you, good to see you back.
Drhedphuk said:
Thank you, good to see you back.
Click to expand...
Click to collapse
I promised it m8 and i m back, i never give up my dreams
CrazyGamerGR said:
I promised it m8 and i m back, i never give up my dreams
Click to expand...
Click to collapse
Good for you.
[KERNEL][SM-G900XX][CM13/CM14.1]CrazyAquaKernel v1[16-08-17]
saif hussain said:
Hallo dev
R u patch your tbis aweaome kernel for kali nethunter support for klteduas
Plz reply m waiting for u
Click to expand...
Click to collapse
It should be work with any rom because of the anykernel but need test because i updated the anykernel zip or you mean to include the kali nethunter features?
[KERNEL][SM-G900XX][CM13/CM14.1]CrazyAquaKernel v1[16-08-17]
saif hussain said:
Yes bro plz add kali nethunter support
Click to expand...
Click to collapse
Maybe soon i ll try but i don't have much time because i have other devices to create kernels too
saif hussain said:
Click to expand...
Click to collapse
What rom are you use?
saif hussain said:
Skies rom 3.1
Click to expand...
Click to collapse
You tried the crazyaqua kernel?
Crazyaqua is working well my friend.
Drhedphuk said:
Crazyaqua is working well my friend.
Click to expand...
Click to collapse
Thx for the feedback m8
CrazyGamerGR said:
Thx for the feedback m8
Click to expand...
Click to collapse
working very well on the g900v , but i have a question : will this new kernel have undervolting and overvolting feature?
KazuDante said:
working very well on the g900v , but i have a question : will this new kernel have undervolting and overvolting feature?
Click to expand...
Click to collapse
I will add this feature in the next build m8
Thanks for the kernel but on stock based rom of xXx developer phone restarted all over
NecromantiA said:
Thanks for the kernel but on stock based rom of xXx developer phone restarted all over
Click to expand...
Click to collapse
I don't have time to support stock rom i just create kernels for LineageOS/Cyanogenmod
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- frandom
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazyAquaKernel[AnyKernel]:https://www.androidfilehost.com/?w=files&flid=209595
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Eliminater74
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the LeEco Le Max 2
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-llm2-llp3-los
Kernel Special Features:
Version Information
Status: Testing
Created 2017-08-25
Last Updated 2017-08-24
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/24-08-17
- initial release
v2.0/4-9-17
- input boost
- frandom
- msm thermal
- many improvments under the hood
reserve1
reserve2
reserve3
Nice to ser you here. Another custom kernel for our device. Thanks
Thanks , I will for sure trying it.
Link ?
Kernel boots on RR. I will test the kernel and report.
Meanwhile could you suggest some profiles for better battery and better performance both!?
prajjwal.laad said:
Kernel boots on RR. I will test the kernel and report.
Meanwhile could you suggest some profiles for better battery and better performance both!?
Click to expand...
Click to collapse
Stock settings are ok ,when i will add more features i will add ready profiles for battery life and performance,there is already a profile in kernel for tweaked interactive by me for battery life and good performance too
Sent from my iPhone using Tapatalk Pro
Thanks for the reply.
Hey gamer bud. Thanks for a new kernel.. As a user all I want is a good performance and 10h SoT.. That's all Good works..
Is camera focus problem solved yet?
I was facing focus issue with nougat roms.
N-Gage4ever said:
Hey gamer bud. Thanks for a new kernel.. As a user all I want is a good performance and 10h SoT.. That's all Good works..
Click to expand...
Click to collapse
i want the same m8 xD,i try much for great battery life
Sent from my iPhone using Tapatalk Pro
baratheon16 said:
Is camera focus problem solved yet?
I was facing focus issue with nougat roms.
Click to expand...
Click to collapse
Same problems with every lineageos rom m8
Sent from my iPhone using Tapatalk Pro
How much score it gets in antutu?
Well, all day with this kernel, first time since i havê the phone i leave my work with battery. 25% still, and heavy usage as always. Pretty impressed. Thanks
Can I use this Kernel on MIUI based rom?
Valid for EUI rom or only Nougat 7.1.2 ?
nosidefcp said:
Well, all day with this kernel, first time since i havê the phone i leave my work with battery. 25% still, and heavy usage as always. Pretty impressed. Thanks
Click to expand...
Click to collapse
Thx for feedback m8
Sent from my iPhone using Tapatalk Pro
jaysleem101 said:
Can I use this Kernel on MIUI based rom?
Click to expand...
Click to collapse
Just for los based roms
Sent from my iPhone using Tapatalk Pro