Hi,
I have flash system.img file by using
Code:
D:\ADB\Android>fastboot flash system d:\backup\flash\system.img
sending 'system' (116302 KB)...
OKAY [114.524s]
writing 'system'...
OKAY [ 47.582s]
finished. total time: 162.108s
It seems normal to me, but the problem arise when I restart the the phone. The phone unable to boot, and when I try
Code:
ADB Shell
It says somethings like "sh" is not found. So I do reboot recovery go to the shell and mount /system. Shockingly there is nothing in there.
I have checked the contents of system.img, and there is a lot of things in there, including the "sh". But it seems fastboot failed to flash the system partition.
Anyone can help me ?
maybe you should tell more info about your device, brand,chipset, etc ?
so people can be more easy to help.
just newbie suggestion, ignore this if its no help xD
Looks like your system image file is corrupted cause its not mounted after loading kernel. What kind of filesystem the image is using?
lolet said:
Looks like your system image file is corrupted cause its not mounted after loading kernel. What kind of filesystem the image is using?
Click to expand...
Click to collapse
The system image is not corrupted, because I can safely flash it using Clockworkmod. The filesystem is yaff2, and I have tried opening it using some software and my file is there. I think the problem lies on fastboot who failed flashing properly.
simple
yokowasis said:
Hi,
I have flash system.img file by using
Code:
D:\ADB\Android>fastboot flash system d:\backup\flash\system.img
sending 'system' (116302 KB)...
OKAY [114.524s]
writing 'system'...
OKAY [ 47.582s]
finished. total time: 162.108s
It seems normal to me, but the problem arise when I restart the the phone. The phone unable to boot, and when I try
Code:
ADB Shell
It says somethings like "sh" is not found. So I do reboot recovery go to the shell and mount /system. Shockingly there is nothing in there.
I have checked the contents of system.img, and there is a lot of things in there, including the "sh". But it seems fastboot failed to flash the system partition.
Anyone can help me ?
Click to expand...
Click to collapse
ur work is simple...just plug in ur phone in fastboot mode...keep a boot.img file in the same folder that that of the fastboot folder....boot.img can be taken from ur STOCK ROM
and type ==
fastboot devices
then ur device will be shown.....
then type
fastboot flash boot boot.img
n its done!
I stuck with my Mate 9 Error mode numbers 11 and 2
MEGHSHAH said:
ur work is simple...just plug in ur phone in fastboot mode...keep a boot.img file in the same folder that that of the fastboot folder....boot.img can be taken from ur STOCK ROM
and type ==
fastboot devices
then ur device will be shown.....
then type
fastboot flash boot boot.img
n its done!
Click to expand...
Click to collapse
I would like to tell you my problem, I have a Mate 9 MHA-L09C605B111 which I did a rebrand a while ago and I'm with CUST 432 and installed the version of Oreo 8.0.0.368, a few weeks ago I received the update 369 via OTA. It was interesting to try; the problem is that I had open bootloader, TWRP Pretorian 3.2.0 and Root, take a terrible decision to do a relock of the bootloader.
After several attempts and letting the battery drain I could enter Fastboot mode, I have the FRP unlocked and I could unlock the bootloader again, the problem is that I can not enter either the TWRP, or to recovery mode, try flashing again the same TWRP I had installed it well but still when I want to enter after passing the Huawei logo it remains on the white screen of ERROR MODE, Func NO: 11 (recovery image) Error NO: (image Failed!) Reading other forums and looking I have been told a lot by Internet that it is necessary to make the Dload method try it but it did not work, I understand that it does not work in this model but I still try it.
I also did a flash with all the files as I found in a tutorial
"When you have system extracted, flash it in fastboot using fastboot flash system system.img.
Do the same with KERNEL, extract and flash to fastboot flash kernel KERNEL.IMG
(BOOT is now split into RAMDISK and KERNEL)
Recovery was split to recovery_ramdisk, recovery_vendor and recovery_vbmeta
Boot was split into ramdisk and kernel
Recovery2 (erecovery) was split into erecovery_ramdisk, erecovery_kernel, erecovery_vendor and erecovery_vbmeta
fastboot flash ramdisk ramdisk.img. Kernel flashed as fastboot flash kernel kernel.img.
Recovery ramdisk as fastboot flash recovery_ramdisk recovery_ramdisk.img "
I'm still stuck on the same screen with error 11 and 2 I made the flash of the recovery that I used when I put version 368 are two MHA_RECOVERY_NoCheck.img and MHA_RECOVERY2_NoCheck.img both give Failed using the command Fastboot flash recovery_ramdisk RECOVERY_XXXX with both the same without using the _ramdisk command is equal I'm still stuck in the same state.
Does anyone have an idea that another method I can try?
I will thank you very much.
You can flash all * .img through ADB and in this case there is a specific order to do it, check several threads but I did not get an answer and search but I could not find anything, it is worth noting that when I flash files I mentioned before all OKAY but on power up it goes back to error 11 and 2 I have been told that it is a partition problem but I could not find something to recover them, there is some method that is missing or maybe an error in the steps I am doing ? I still can not access the TWRP but I can access without problems by ADB.
Hi.
I needed to change the boot logo on a few tablets and so i dumped the oeminfo partition and changed the logo data to all zeroes. This the modded oeminfo worked well on the first tablet, but when I flashed it to the second tablet it stopped booting. In retrospect I can see how this is a bad idea as the oeminfo supposedly contains device specific information such as IMEI etc.
I did make a backup of the original oeminfo partition with dd before flashing the modified one. The problem now is that fastboot does not allow me to flash the original oeminfo partition. I get:
Code:
Code:
$ sudo fastboot flash oeminfo oeminfo.img
target reported max download size of 531628032 bytes
sending 'oeminfo' (65536 KB)...
OKAY [ 2.091s]
writing 'oeminfo'...
FAILED (remote: Command not allowed)
I cannot seem to boot into recovery as the boot process gets stuck before this (Tried with key-combo and through fastboot boot).
Device is a: HUAWEI MediaPad M3 Lite 10
Phone and FRP unlocked.
As far as I can see there is no custom recovery available for this device yet (and it would properly not be usable as I cannot access original recovery)
Do you guys have any clue on how to flash the original oeminfo partition? I can make changes to the boot partition and was thinking about if there could be a way to enable adb in a recovery mode during boot by changing the init.rc / build.prop etc?
Any ideas on how to solve this or for a more suitable thread would be deeply appreciated.
Thanks
Bump.
Anyone that can point me in the right direction?
I would like to flash the original recovery on my C432 with .120 on it.
I tried the .104 file but this does not work.
I am getting the ADB error
FAILED (remote: partition length get error)
who can help?
Solved myself adb command is now fastboot flash recovery_ramdisk !!!!
boris03 said:
I would like to flash the original recovery on my C432 with .120 on it.
I tried the .104 file but this does not work.
I am getting the ADB error
FAILED (remote: partition length get error)
who can help?
Click to expand...
Click to collapse
So I bought a son new phone.
As he told he installed magisk first, flashing "magisk_patched.img" through windows shell, everything was fine. Then He flashed twrp and magisk, everything was almost fine, he noticed that he cant play audio. He was trying to fix it first through installing magisk audio mods like viper and sauron. It didn't fixed anything, he unistalled it, everything was still in the same state, so he decided to flash stock frimware. He flashed through mi flashing tool, unfortunetaly It was image for "global xiaomi version" I mean "PFQMIXM" when as far as I know It should be "PFQEUXM". It didn't work and he was stuck in a bootloop. He found "MiUi 11 " image and for still unknown to me reason thought that it is going to fix everything. He flashed It again through mi flashing tool. It didn't work. He did that second time but at last he just closed the flashing tool while it was doing its thing.
At last he found eu firmware but now after all of that when i try to flash it or single files like crc list i get this:
flash crclist "E:\ModCR\adb\images\crclist.txt"
Sending 'crclist' (0 KB) FAILED (Write to device failed (Unknown error))
fastboot: error: Command failed
Device only boots to fastboot (no recovery/twrp either).
I tried erasing cache:
./fastboot erase cache
Erasing 'cache' FAILED (Write to device failed (Unknown error))
fastboot: error: Command failed
I tried to check slots:
./fastboot getvar active-slot
getvar:active-slot FAILED (Write to device failed (Unknown error))
Finished. Total time: 5.003s
I tried to change slot:
./fastboot set_active b
fastboot: error: Device does not support slots
When i typed "fastboot devices" It appeared as "??????"
./fastboot devices
???????????? fastboot
I don't know how to fix it, If anyone knows or has any kind of even small idea please write it down. I would be very greatfull.
Install custom recovery twrp
Install custom rom
Reboot
Download firmware EU
Install a firmware witch miflash
Restore Factory
Walaaaaa
xt610 said:
Install custom recovery twrp
Install custom rom
Reboot
Download firmware EU
Install a firmware witch miflash
Restore Factory
Walaaaaa
Click to expand...
Click to collapse
What i understand from op post is that fastboot commands are not working. So how will he flash twrp?
The firmware version doesn't matter at all you can flash EU on global and vice versa it doesn't matter.
What I think happened was your son never switched to slot 'a' before using mi flash.
Xiaomi's install script for miflash requires you to be on slot 'a' before flashing.
The only way to recover from this is edl mode which requires a xiaomi verified account to fix.
MOD EDIT: Part removed
Please do not advertise/recommend remote unlock services on XDA. Please read the FORUM RULES especially those:
hi.
FastBoot recovery failed: partition 'recovery' not support flash
My mobile is honor 3c lite hol-u19 running official Android OS 4.4.2.
I am trying to install twrp recovery through fastboot. I tried executing the command
fastboot flash recovery recovery.img
But I am getting the error as partition 'recovery' not support flash. Please any one help me to fix this. Whether I need to change anything on the recovery partition?