[TWRP][J5 Prime][3.1.1] TWRP for Galaxy J5 Prime - Samsung Galaxy J5 PRIME ROMs, Kernels, Recoveries,

[TWRP][J5 Prime][3.1.1] TWRP for Galaxy J5 Prime - Samsung Galaxy J5 PRIME ROMs, Kernels, Recoveries,

Siddhant NAik said:
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DO THIS AT YOUR OWN RISK. I AND XDA AND NOT RESPONSIBLE FOR ANY DAMAGE CAUSED. FOLLOW THE STEPS CORRECTLY.
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
FULL STEPS TO INSTALL TWRP
Flash with ODIN in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTEN SOME ANDROID 5.1.1/6.0/7.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
FEATURES
exFAT file system support (read, write, format, backup & restore)
NTFS file system support (read, write, format)
ADB root
ADB Sideload
Full SELinux support
Built in android 6.0 tree
Mount Ext Sd Card
To root with SuperSU:
Download the latest SuperSU by Chainfire.
Flash it through TWRP. If you can't mount internal storage, use ADB SIDELOAD or OTG instead.
Go to [Reboot] -> [System].
To mount Internal Storage
Download the Modded Kernel from the link below.
Flash through Odin in AP.
Boot into TWRP and FORMAT /data.
Downloads
SuperSu
TWRP-3.1-0
Modded Kernel
Bugs
MTP
Device Tree: https://github.com/Siddhant-Naik/android_device_samsung_on5xelte
HIT THANKS IF I HELPED YOU

Click to expand...
Click to collapse
Did you build it from source?

Siddhant NAik said:
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DO THIS AT YOUR OWN RISK. I AND XDA AND NOT RESPONSIBLE FOR ANY DAMAGE CAUSED. FOLLOW THE STEPS CORRECTLY.
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
FULL STEPS TO INSTALL TWRP
Flash with ODIN in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTE: ON SOME ANDROID 5.1.1/6.0/7.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
FEATURES
exFAT file system support (read, write, format, backup & restore)
NTFS file system support (read, write, format)
ADB root
ADB Sideload
Full SELinux support
Built in android 6.0 tree
Mount Ext Sd Card
To root with SuperSU:
Download the latest SuperSU by Chainfire.
Flash it through TWRP. If you can't mount internal storage, use ADB SIDELOAD or OTG instead.
Go to [Reboot] -> [System].
To mount Internal Storage
Download the Modded Kernel from the link below.
Flash through Odin in AP.
Boot into TWRP and FORMAT /data.
Downloads
SuperSu
TWRP-3.1.1
Modded Kernel
Bugs
MTP
Device Tree: https://github.com/Siddhant-Naik/android_device_samsung_on5xelte
HIT THANKS IF I HELPED YOU
Click to expand...
Click to collapse
thanks sir, work in my j5 prime
Sent from my SM-G570Y using Tapatalk
---------- Post added at 11:11 AM ---------- Previous post was at 10:50 AM ----------
i already install,
but, i cant install from internal..
& i try to backup my rom, but failed..
please sir, fix this...
thanks before
Sent from my SM-G570Y using Tapatalk

fahri01 said:
thanks sir, work in my j5 prime
Sent from my SM-G570Y using Tapatalk
---------- Post added at 11:11 AM ---------- Previous post was at 10:50 AM ----------
i already install,
but, i cant install from internal..
& i try to backup my rom, but failed..
please sir, fix this...
thanks before
Sent from my SM-G570Y using Tapatalk
Click to expand...
Click to collapse
Flash the modded kernel

Any grace ux rom

Gautham Asir said:
Any grace ux rom
Click to expand...
Click to collapse
not yet, does my injustice rom flash with new TWRP??

I will try to flash

Unable to flash since it failed

Who knows if Recovery worked?

Screenshot

Twrp is working fine except data and mtp

It does not receive the machine memory and resets it when it is not set

Is normal that the custon kernel take too much time to install? odin freezes in:
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..

Please revise any flash files to reboot

Dont flash kernel
use advance wipe
select data partion
click on repair
th format it using ext 2 or other
boom data will be mounted

thanks :3
Very good work. No problems on SM-G570M
Nothing else MTP and data
Thanks for making it possible I've been waiting for TWRP for some time.

TheFlash said:
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DO THIS AT YOUR OWN RISK. I AND XDA AND NOT RESPONSIBLE FOR ANY DAMAGE CAUSED. FOLLOW THE STEPS CORRECTLY.
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
FULL STEPS TO INSTALL TWRP
Flash with ODIN in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTE: ON SOME ANDROID 5.1.1/6.0/7.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
FEATURES
exFAT file system support (read, write, format, backup & restore)
NTFS file system support (read, write, format)
ADB root
ADB Sideload
Full SELinux support
Built in android 6.0 tree
Mount Ext Sd Card
To root with SuperSU:
Download the latest SuperSU by Chainfire.
Flash it through TWRP. If you can't mount internal storage, use ADB SIDELOAD or OTG instead.
Go to [Reboot] -> [System].
To mount Internal Storage
Download the Modded Kernel from the link below.
Flash through Odin in AP.
Boot into TWRP and FORMAT /data.
Downloads
SuperSu
TWRP-3.1.1
Modded Kernel
Bugs
MTP
Device Tree: https://github.com/Siddhant-Naik/android_device_samsung_on5xelte
HIT THANKS IF I HELPED YOU
Click to expand...
Click to collapse
hi
how to flash modded kernel by odin or twrp ?

Cannot flash modded kernel

Wait for some GraceUX ROM

andro_harsh said:
cannot flash modded kernel
Click to expand...
Click to collapse
extract it and flash the img from twrp and format data
boom internel will be mounted

Related

[MOD] MultiRom for Samsung Galaxy J5 (2015) [SM-J5xxx]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
MultiROM is one-of-a-kind multi-boot mod for Galaxy J5. It can boot any Android ROM as well as other systems like Ubuntu Touch, Plasma Active, Bohdi Linux or WebOS port, once they are ported to our device. Besides booting from device's internal memory, MultiROM can boot from USB drive connected to the device via OTG cable. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot. You can see how it looks on the left image below and in gallery. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs, daily prebuilt image files to install Ubuntu Touch and MultiROM even has its own installer system, which can be used to ship other Linux-based systems.Features:
Multiboot any number of Android ROMs
Restore nandroid backup as secondary ROM
Use for example Ubuntu Touch or Desktop alongside with Android.
Boot from USB drive attached via OTG cable
Warning!
It _is_ dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is messing with boot sector and data partition. If something goes wrong you will have to flash factory images again. Make backups. Always.
Installation:
1) Flash the Modified TWRP image with odin or extract the tar file and install the img file with flashify or another recovery that has img install feature.
2) After flashing the recovery image boot into the recovery and Flash the MultiROM zip.
3) That's it you're done. Reboot into system and the multirom menu will show up.
Enjoy!!
MultiROM has 3 parts you need to install:
MultiROM (multirom_vXX_n7-signed.zip) - download the ZIP file from second post and flash it in recovery.
Modified recovery (TWRP_multirom_n7_YYYYMMDD.img) - download the IMG file from second post and use fastboot or Flashify app to flash it.
Patched kernel - Not needed for our device.
Your current rom will not be erased by the installation.
Downloads are in 2nd post!!
Important: Since the Kernel hasn't Kexec Hardboot patch, you have to check "use no kexec workaround" box in multirom settings. (it has been set to this option by default)Adding ROMs:
Android
Go to recovery, select Advanced -> MultiROM -> Add ROM. Select the ROM's zip file and confirm.
Using USB drive (not tested yet):
During installation, recovery lets you select install location. Plug in the USB drive, wait a while and press "refresh" so that it shows partitions on the USB drive. You just select the location (extX, NTFS and FAT32 partitions are supported) and proceed with the installation.
If you wanna use other than default FAT32 partition, just format it in PC. If you don't know how/don't know where to find out how, you probably should not try installing MultiROM.
If you are installing to NTFS or FAT32 partition, recovery asks you to set image size for all the partitions - this cannot be easilly changed afterward, so choose carefully. FAT32 is limited to maximum of 4095MB per image - it is limitation of the filesystem, I can do nothing about that.
Installation to USB drives takes a bit longer, because the flash drive is (usually) slower and it needs to create the images, so installation of Ubuntu to 4Gb image on my pretty fast USB drive takes about 20 minutes.
Enumerating USB drive can take a while in MultiROM menu, so when you press the "USB" button in MultiROM, wait a while (max. 30-45s) until it searches the USB drive. It does it by itself, no need to press something, just wait.
Updating/changing ROMs:
1. Primary ROM (Internal)
Flash ROM's ZIP file as usual, do factory reset if needed (it won't erase secondary ROMs)
Go to Advanced -> MultiROM in recovery and do Inject boot sector.
2. Secondary Android ROMs
If you want to change the ROM, delete it and add new one:
To update ROM, follow these steps:
Go to Advanced -> MultiROM -> List ROMs and select the ROM you want to update.
Select "Flash ZIP" and flash ROM's ZIP file.
Explanation of recovery menus:
Main menu:
Add ROM - add ROM to boot
List ROMs - list installed ROMs and manage them
Inject boot.img file - When you download for example kernel, which is distributed as whole boot.img (eg. franco kernel), you have to use this option on it, otherwise you would lose MultiROM.
Inject boot sector - Use this option if MultiROM does not show up on boot, for example after kernel installation.
Settings - well, settings.
Manage ROM:
Rename, delete - I believe these are obvious
Flash ZIP (only Android ROMs) - flash ZIP to the ROM, for example gapps
Add/replace boot.img - replaces boot.img used by this ROM, this is more like developer option.
Re-patch init - this is available only for ubuntu. Use it when ubuntu cannot find root partition, ie. after apt-get upgrade which changed the init script.
How does Kexec workaround works:
You need to have a kexec-hardboot supporting kernel or the non-kexec workaround as described perfectly by @nkk71 here: http://forum.xda-developers.com/show...26&postcount=4 (Be sure to leave him a thanks!)
NOTE: Stock Lollipop Firmware required. Will not work on MM bootloaders.
Credits:
A big thanks for:
@nkk71 For his kexec workaround
@Tasssadar For MultiRom Source Code
@Nick Verse
XDA:DevDB Information
MultiRom for Galaxy J5, Tool/Utility for the Samsung Galaxy J5
Contributors
ganesh varma
Source Code: https://github.com/Galaxy-J5
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2016-12-18
Created 2016-12-18
Last Updated 2016-12-19

Reserved
Downloads:
MultiRom TWRP Recovery:
Recovery Images for LL Bootloader:-
J500F
J500FN
J500G
J500H
J500M
J500Y
MultiRom ZIP Installer: multirom-20161218-v33-UNOFFICIAL.zip
Changelog:
Code:
18.12.2016
=====================
* Initial release
NOTE: Stock Lollipop Firmware required. Will not work on MM bootloaders.
Hit that Thanks button if you like my work!!

Awesome work bro @ganesh varma ..
Congrats & all the best.. :good::good:

That's really cool buddy.
I'm very impressed
Nice one
John
Sent from my Honor 8 using XDA Labs

Uhh, so that means i can dualboot in android?
anyways, cool

Alright! Time to get our hands dirty ?
Great job @ganesh varma and @Nick Verse to port this Mod to our J5. Thankyou so much!

Nice work bro @ganesh varma
????????

Great job. Just noticed that the screen resolution is not okay. It seems somehow it zoomed a bit in....

Will the data partition be the same for both ROMs or different??

I have installed a new ROM in external SD. When I try to boot it, I can't find it, why??

updesh94 said:
Will the data partition be the same for both ROMs or different??
Click to expand...
Click to collapse
No the secondary ROM creates a folder in the internal storage and uses it as data partition. The two roms have their own data partitions.
MiGuPa said:
I have installed a new ROM in external SD. When I try to boot it, I can't find it, why??
Click to expand...
Click to collapse
Did you see by swiping right to the External tab on the multirom menu? The roms installed to SD card will be shown under External tab in multirom menu.

I think that it's so cool that you have made this for the J5
Good work
Thanks for your time
John

ganesh varma said:
Did you see by swiping right to the External tab on the multirom menu? The roms installed to SD card will be shown under External tab in multirom menu.
Click to expand...
Click to collapse
Yes, I also stayed there, and any new

Good Work, man!
works in J500M?

luisfelipee said:
Good Work, man!
works in J500M?
Click to expand...
Click to collapse
Nope, read the #2 post man... For now only F and FN models.
Sent from my SM-J500FN using XDA Labs

Mixed Review!
ganesh varma said:
No the secondary ROM creates a folder in the internal storage and uses it as data partition. The two roms have their own data partitions.
Click to expand...
Click to collapse
So I tried the multirom, It's working absolutely great.. No issues in any rom...
I installed Stock Lollipop primary rom and Resurrection rom as the secondary rom...
Glitches---
1. In the boot menu where OS are displayed if we tap the multirom icon, a ping pong game starts which says "to exit press power button" but then we are stuck in it and only possible way is to remove battery... :laugh:
2. Sometimes the selected rom doesn't boot and nothing happens.. only 1/10 times... :silly:
3. Storage becomes low in /data and /system has a lot of space, can u suggest a way to transfer dalvik-cache of primary rom to /system ??I tried one but it didn't work!!
By the way, It seems awesome to multiboot Roms...
I'm using j500F btw...

Now I tried to install an ROM on internal memory, and when I tried to boot:

JosephDM said:
Nope, read the #2 post man... For now only F and FN models.
Sent from my SM-J500FN using XDA Labs
Click to expand...
Click to collapse
thanks for reply. i asked cuz some F roms works in M model
updesh94 said:
So I tried the multirom, It's working absolutely great.. No issues in any rom...
I installed Stock Lollipop primary rom and Resurrection rom as the secondary rom...
Glitches---
1. In the boot menu where OS are displayed if we tap the multirom icon, a ping pong game starts which says "to exit press power button" but then we are stuck in it and only possible way is to remove battery... :laugh:
Click to expand...
Click to collapse
try press volume down + power button till restart.
to recovery mode when cel stuck, press all buttons (vol+, Vol-, Home and power) when screen off leave 'vol-' only and keep others

Update
Multirom for J500G,J500H,J500M and J500Y variants is now available. Can be downloaded from the second post!!
These recovery images are for LL bootloader's. Multirom for MM bootloader's will be available by the end of next week. :good:
Make sure that you have read all the instructions from the first post when you ran into problems. Everything is mentioned over there.

thanks @ganesh varma...its really awasome i m using on j500f.

[RECOVERY[G610] TWRP 3.1 for Galaxy J7 Prime

TWRP RECOVERY FOR GALAXY J7 PRIME
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DO THIS AT YOUR OWN RISK. I AND XDA AND NOT RESPONSIBLE FOR BRICKS. FOLLOW THE STEPS CORRECTLY.
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
What's new in 3.1.0-0:
vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
adb backup to stream a backup directly to or from your PC, see documentation here (bigbiff)
tweak MTP startup routines (mdmower)
support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
better indicate to users that internal storage is not backed up (Dees_Troy)
improve automatic determination of TW_THEME (mdmower)
minimal getcap and setcap support (_that)
try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
shut off backlight with power key (mdmower)
timeout during FDE decrypt (Dees_Troy and nkk71)
support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
boot slot support (Dees_Troy)
TWRP app install prompt during reboot (Dees_Troy)
support for AB OTA zips (Dees_Troy)
support new Android 7.x log command (Dees_Troy)
update recovery sources to AOSP 7.1 (Dees_Troy)
numerous bugfixes and improvements by too many people to mention
Official TWRP App
The official TWRP app is the first and only first-party app developed by Team Win for TWRP. Please bear with us as we work to fix any bugs and build out the features. The initial version of the app does not support flashing on the Pixel due to the Pixel's A/B partition layout. In addition, the app may not support finding and flashing images from external storage locations. We are working hard to improve these items and bring you more new features.
Download Links:
We recommend downloading the app from the Play Store.
If you do not have Play Store access, you may download the Official TWRP App here: https://dl.twrp.me/twrpapp/
How do I use the app?
When you first open the app, you will be greeted by a few options. First, you will need to agree not to hold us responsible for anything that happens to your device while using the app. You may also grant the app root permissions. The app will work without root, but some functionality like image flashing will be disabled. Lastly, you can opt into enabling InsightCore (more on this feature later).
Once you have passed this initial screen, you will be greeted with the app home screen where you can choose TWRP FLASH or NETWORK STATISTICS (more on the network statistics later). On the TWRP FLASH screen you will need to select a device. Once you have selected a device, the app will periodically check for new TWRP versions for the device that you have selected. The default interval is once per day, but you can tap on the settings icon in the upper-right to change the interval or disable the update check entirely.
If you enabled root access, you will see options for selecting an image and buttons for flashing the selected image to boot or recovery. Note that you should flash TWRP images to recovery. The boot image flashing is for flashing full boot images (not just kernel zImages) and should not be used for flashing TWRP.
Instructions:
Flash with ODIN in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTE: ON SOME ANDROID 5.1.1/6.0/7.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
DOWNLOADS:
twrp3.1.0-0
Use Odin to flash.
You can find a zip containing Odin as well as a link to Samsung's Mobile drivers page here:
https://idlekernel.com/flash-tools/
IMPORTANT! This device enforces dm-verity. ANY modifications or even mounting system will put the device into a bootloop. To prevent this TWRP will ask at first boot to if you want to keep system 'Read only' or 'Allow modifications to system'. If you choose to keep 'Read only' you will have to flash TWRP at every boot to recovery. If you choose to 'Allow' then SuperSU needs to be flashed to disable dm-verity.
To Root:
Flash the latest SuperSU:
http://www.supersu.com/download#zip
To disable forced encryption, mount internal storage(DATA) and disable dm-verity:
(Note this MUST be flashed before SuperSU if you intend to root)
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install modded kernel from below.
5. Reboot
Modded Kernel:
https://mega.nz/#!tJ5XVa4I!_kMCzV7kOMvEdvJwB3ZUDPZjGUNIuuzK6RSLHMiZG4M (Thanks to maxx35000)
NOTE: NO NEED TO FLASH MODDED KERNEL IF YOU ARE USING ANY CUSTOM ROM
HIT THANKS IF I HELPED YOU:good:

is this oficial ?

Mounting internal is working?

Not work on last update from samsung, with update AQC4 recovery not incompatible

Janeslejade said:
Mounting internal is working?
Click to expand...
Click to collapse
Yes. Read the thread on how to do this.

hoangphuc057 said:
Not work on last update from samsung, with update AQC4 recovery not incompatible
Click to expand...
Click to collapse
It's working. I'm on AQC4

Not working on G610Y.
---------- Post added at 09:23 AM ---------- Previous post was at 09:11 AM ----------
Guys, i want to go back to stock recovery, questions.... Is it safe to flash this stock recovery??
SM-G610F/M_stock_recovery
My unit is G610Y.

Up... Please help, i need the SM-G610Y_stock_recovery... Please someone help or advise if SM-G610F/M_stock_recovery is okay to flash on G610Y??

Help guys! I tried to root my phone but no success. It says need adb 1.3 or newer. What should i do?

External sd mounting?

Thanks for the update, working on G610M

4. Install modded kernel from below.
Click to expand...
Click to collapse
how to do this?

Ephesis said:
how to do this?
Click to expand...
Click to collapse
Flash through odin in AP

Siddhant NAik said:
Flash through odin in AP
Click to expand...
Click to collapse
how about rooting? flash via odin too?
---------- Post added at 09:52 AM ---------- Previous post was at 09:40 AM ----------
Flash through odin in AP
Click to expand...
Click to collapse
Odin wont read it since its a zip file not a tor file.

inamie said:
External sd mounting?
Click to expand...
Click to collapse
This is the essential question!

thank

trinaldi said:
This is the essential question!
Click to expand...
Click to collapse
not working.

Anyone tried this on G6100 ?

Please update aqc4 mod kernel

Thank you bro. Haha :d :d

[RECOVERY][OFFICIAL] TWRP for Galaxy S8 and S8+ (Exynos)

Team Win Recovery Project 3.1.1
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#include <std_disclaimer.h>
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country, European Union for example, forces Samsung to provide hardware warranty regardless of software status.)
More Infos: https://en.m.wikipedia.org/wiki/Rooting_the_Android_operating_system
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. It is HIGHLY UNRECOMMENDED to purchase any access to any kind of private forums, ROMs or Kernels.
(DO NOT GET FOOLED.)
Download:
Galaxy S8 (dreamlte - Exynos vaiants - G950F/FD/N/X)
https://twrp.me/devices/samsunggalaxys8.html
Galaxy S8+ (dream2lte - Exynos variants - G955F/FD/X/N)
https://twrp.me/devices/samsunggalaxys8plus.html
Sources:
https://github.com/TeamWin
Changelog:
Check #2.
Guide:
Check #3.
Official Telegram Group: - General Discussion
Join to get quick support (when you find my guide confusing or meet any unexpected problem).
You can also discuss about ROMs(this group is "neutral" so you can discuss about or review any ROM. Note: Devs: Do NOT aggressively advertise your work.), get latest updates from developers or report possible bugs.
Invite Link
Show your appreciation:
Click Thanks!, Rate 5-star or/and Donate to me.
XDA:DevDB Information
TWRP for Galaxy S8 and S8+, Tool/Utility for the Samsung Galaxy S8
Contributors
jesec
Source Code: https://github.com/TeamWin
Version Information
Status: Beta
Created 2017-04-24
Last Updated 2018-07-22

Changelog:
Aug. 02:
Merged AQG kernel updates from Samsung.
NOTE: AQG or later bootloader is supported and REQUIRED from this version.
May. 30:
Possible fix for I/O problems.
Backported latest F2FS from Linux 4.12.
Minor kernel updates.
Apr. 27:
Problems Solved:
1. MTP
2. ADB
3. External SD Mount
Features Added:
F2FS - Note: This change ONLY makes it possible to operate F2FS in TWRP. You still need a F2FS-compatible KERNEL to boot into system with F2FS.
Note: As MTP and ADB are available now, flashable zips will no longer be included. Please download them by yourself and transfer them from your computer to phone if you need them.
Useful Links:
Disable dm-verity and make encryption optional: https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
Magisk: https://forum.xda-developers.com/apps/magisk
Apr. 24:
Initial Release

Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.

Awesome

Great work thank you very much
Sent from my SM-G955F using Tapatalk

if i wipe data partition in order to disable encryption - is that like erasing my phone and starting from scratch? will i lose all my data?

nk33 said:
if i wipe data partition in order to disable encryption - is that like erasing my phone and starting from scratch? will i lose all my data?
Click to expand...
Click to collapse
Yes you will, make sure you've backed-up as much as you can to your Google Cloud Storage. I promise, it's worth it.

Many Thanks

Kevin_R said:
Yes you will, make sure you've backed-up as much as you can to your Google Cloud Storage. I promise, it's worth it.
Click to expand...
Click to collapse
Thanks.
And if i just install TWRP, and then the root zip file to give me root will it all work ok? will i achieve root ok?
I spent ages getting this phone just like i want it and seriously cant be bothered to do it all again - will i be ok keeping encryption on if all i want to achieve is root?
what will i lose out on if i dont disable encryption?

nk33 said:
Thanks.
And if i just install TWRP, and then the root zip file to give me root will it all work ok? will i achieve root ok?
I spent ages getting this phone just like i want it and seriously cant be bothered to do it all again - will i be ok keeping encryption on if all i want to achieve is root?
what will i lose out on if i dont disable encryption?
Click to expand...
Click to collapse
I found that if I didn't disable the encryption, root wouldn't work as it couldn't mount the file system to make the relevant changes
---------- Post added at 02:19 PM ---------- Previous post was at 02:14 PM ----------
Anyone managed to get Samsung Pass and Secure Folder working? I have Magisk Hide running and Knox Trip is emulated to 0x0. Other apps that would normally detect root don't detect it but Samsung Pass and Secure Folder still can.

Is superSU SR3 working??

its a great work

anyone tried if Samsung Pay still works after this? I have not got my phone yet.

Just for info tried installing the SuperSU binary through TWRP but, as TWRP seems to have no access to the SD card, the flash failed and left me in a boot loop.
Reinstalling TWRP from Odin and reflashing Magisk solved the Boot loop issue.
SuperSU did kill the Knox processes for me though to stop the annoying nagging notifications.

If after flashing from Odin, phone says that needs restore, Just press volume up Bixby Power, wait, then format data, Power off. Now ho back in download mode, reflash with odin, done.
It works all', except personal area and Samsung health

would this work on the SM-G950FD?

if i use this method i lose warranty ? is it possible to do evrything later on normal without having any trouble ?

Phone brick...LOL...

help : just tried to root my g950f Uk 02 - i've flashed it a few times and used the two flash but im getting verification failed and it wont erase anymore when i try use the recovery flash i get invaled mount /data when using that decrypt .zip in flashables do i need to redo the stock firmware and start again?

i am still waiting for my S8(exynos) to arrive and here comes the twrp i did not even wished yet....

[UNOFFICIAL][RECOVERY] TWRP 3.2.1-0 [EXYNOS][6/9]

Team Win Recovery Project
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
Disclaimer: Your warranty is now void!! I won't be responsible if you flash this on another device besides the prescribed device mentioned..
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options, if its not there, you may have to wait for a few days to access that option, some users claim that its within 10 days before this option appears).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country, European Union for example, forces Samsung to provide hardware warranty regardless of software status.)
More Information from here
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. It is HIGHLY UNRECOMMENDED to purchase any access to any kind of private forums, ROMs or Kernels.
(DO NOT GET FOOLED.)
Download: https://github.com/zeroblade1984/samsung_exynos8895/releases/tag/TWRP
Sources: https://github.com/TeamWin
If you love the work you can rate the thread or spare me some beer
XDA:DevDB Information
TWRP, Tool/Utility for the Samsung Galaxy Note 8 (2017 Phone)
Contributors
kairi_zeroblade
Version Information
Status: Stable
Current Stable Version: Update 6/9
Stable Release Date: 2018-06-09
Created 2017-12-20
Last Updated 2018-06-09

Changelog
January 21, 2018
Fixes for touch/responsiveness
Faster Backup and Restore speeds
Should boot up faster than previous
December 20, 2017
Update TWRP base to 3.2.1-0
Use an upstream bringup(dirty) of kernel, credits to @jesec and @geiti94
Bugs: None

Flashing Instructions
Notes: It may wipe all your data including those in internal storage.
Part 1a - HOW-TO FLASH TWRP (for new devices w/o TWRP yet):
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 1b - HOW-TO FLASH TWRP (for devices that already had an earlier build of TWRP):
1. Download the recovery.img from the download page.
2. Place the downloaded image file on your device's memory (internal or external storage or OTG may do).
3. reboot to TWRP either from your Custom ROM menu or by using the previous method where you hold [VOLUME UP] + [BIXBY] + [POWER] when your phone is completely OFF.
4. Go to Install->(locate the file you downloaded)->on the bottom part of TWRP menu you will see flash image, go press it->then you can now select the image file->then choose recovery if you are prompted to what partition you are going to flash->swipe to flash->Profit!!
5. It may be best to reboot to recovery once the procedure is done just to check if things went fine. :good:
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.

Thank you very much for your fine work.
I went to the download site, and the file TWRP-3.2.1.0-greatlte.tar does not seem to work with the latest Odin for some reason.
So I used the recovery.img via the older TWRP on the phone and all good.

Tnx team...got the .img and flashed...reboot in recovery...and working like a charm...realy appreciate the works ??
Sent from my SM-N950F using XDA-Developers Legacy app

Thanks for the work!
Enviado desde mi Galaxy Note 8 mediante Tapatalk

What's the difference between this and the original thread? Is this a newer version that's actively maintained? [emoji846] Thanks

white7561 said:
What's the difference between this and the original thread? Is this a newer version that's actively maintained? [emoji846] Thanks
Click to expand...
Click to collapse
This is the newest version. The other is a older version and i think from maintainer. No more Supports, because there are no new Updates since months
Sent from my Galaxy Note 8 using XDA Labs

white7561 said:
What's the difference between this and the original thread? Is this a newer version that's actively maintained? [emoji846] Thanks
Click to expand...
Click to collapse
Yes this is newer upstream (uses android-8.0 branch from Omni) and I will try my best to keep it up-to-date..
I am also looking for kernel testers as I, alone testing my work will be Bias (I do own both S8 and Note8)

kairi_zeroblade said:
Yes this is newer upstream (uses android-8.0 branch from Omni) and I will try my best to keep it up-to-date..
I am also looking for kernel testers as I, alone testing my work will be Bias (I do own both S8 and Note8)
Click to expand...
Click to collapse
So I could just flash this over the old twrp? Also. Any bugs? Thanks so much eh [emoji846][emoji16]

white7561 said:
So I could just flash this over the old twrp? Also. Any bugs? Thanks so much eh [emoji846][emoji16]
Click to expand...
Click to collapse
You can Either use Odin (I re-uploaded a new Tarball) or just flash the image via an earlier version of TWRP..so far this has no bugs, I tried ADB sideload, backup and restore and had no issues..

kairi_zeroblade said:
You can Either use Odin (I re-uploaded a new Tarball) or just flash the image via an earlier version of TWRP..so far this has no bugs, I tried ADB sideload, backup and restore and had no issues..
Click to expand...
Click to collapse
Done. Installed using twrp method. Worked fine. Anyway. Thanks

is it necessary to initialize (wipe/format data) when updating over old twrp?

Wow! I've been out of the Android game for 6 months and it feels damn good to be back, first stop, TWRP lmao!
Sent from my [device_name] using XDA-Developers Legacy app

Hi guys, sorry for the offtopic, what exactly "greatlte" means?

infrasonic13 said:
Hi guys, sorry for the offtopic, what exactly "greatlte" means?
Click to expand...
Click to collapse
Greatlte is the codename for Samsung Galaxy Note 8 Exynos edition. Powered with Samsung Exynos 8895 processor.
Sent from my SM-N950F using Tapatalk

Edit: Tried it a 2nd time and now it was working. The 1st time I flashed the recovery, rebooted into recovery and started the backup. Guess that this was the problem.
Hi,
I just installed the new TWRP 3.2.1.0 and tried to make a full backup.
But it was not finishing it. After more than 45min I canceld it.
Please find enclosed the log file which was created. Hope it helps
Best regards,
dingolino

I dont get it. Why make this thread when there already is a twrp thread ?

Zionator said:
I dont get it. Why make this thread when there already is a twrp thread ?
Click to expand...
Click to collapse
'Cause it's another maintainer

kevinblackwell said:
'Cause it's another maintainer
Click to expand...
Click to collapse
What do you mean?
What's the difference between this and the other ?

Development [ROM] BeyondROM v1.2 [16/05/2023]-[AWD1]-[SM-S91xB]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest Version v1.2 [16/05/2023]
ROM Maintainer: Andrei @starbucks2010
ROM Info:
Supported devices: S23 Ultra SM-S918B & S23 S911B
ROM Base: S91xBXXU1AWD1 (Android 13 OneUI 5.1) May2023 Patch Level
ROM Features:
Kernel:
Stock Samsung kernel
CSC features:
Call Recording
Camera shutter sound menu
Real time network speed in statusbar
AppLock Enabled
ROM Disarm:
Light ROM debloat
Disabled Encryption
Patched Samsung SmartWatch pairing
Disabled stock recovery-from-boot
Modded Settings/Services
Screenshots in secure apps allowed
Phone status: Official
Software Info ROM Details
Back2Kill mod
Fixes:
Galaxy watch pairing
Secure Folder
Other Tweaks/Mods:
Automatic EFS backup
Various build prop tweaks
Pre-rooted with Magisk canary (needs magisk canary app install after flash)
Netflix playback
Unlimited storage for Google Photos
ROM constraints:
Needs to install Magisk canary 26101 app after ROM flash or you won't see the root
For SafetyNet and Wallet you must install latest kdrag0n v2.4.x-mod1.x magisk module and enable Zygisk
Not working
Knox related apps: Samsung Pay, Samsung AutoFill
Changelog
v1.2
- Based on the latest firmware [AWD1] OneUI 5.1 **You must be on AWD1 firmware to flash BR12 ROM zips**
- Patched with magisk canary 26201
#######################
PREVIOUS VERSION
#######################
v1.1
- Based on the latest firmware [AWC8] OneUI 5.1 **You must be on AWC8 firmware to flash BR11 ROM zips**
- Changed to RW partitions
Credits
- John Wu for Magisk
- Mr. Waehere for the kitchen and support
- afaneh92 for S23 TWRP and endless help
- LeeXDA18 for help with knox/VK removal and more fixes
- the elite team of ROM testers (Carlos, Mark and many more)
- dutchman89 for Beyond boot logo
- If you like my work and want to support me, consider buying me a coffee (PayPal link)
Download Links
CURRENT VERSION
###############################
SM-S911B ROM Download AWD1 [BR1.2]
################################
SM-S918B ROM Download AWD1 [BR1.2]
###############################
USEFUL LINKS
###############################
BeyondROM S23 Telegram
S23U TWRP XDA
If you like my work, support me and buy me a coffee (PayPal link)
Installation:
Spoiler: Coming from full stock
**Note: These steps will trip Knox and possibly void warranty on your phone**
**Note: Following these steps you will lose data on your phone, so back-up before continuing**
UNLOCK BOOTLOADER:
Enable Developer Options: Settings > About Phone > Software Information > Tap 7 times 'Build Number'
Enable OEM Unlock: Settings > Developer Options > Click 'OEM Unlock' to enable it
Turn off phone
Hold Volume Up + Volume Down and plug-in the USB cable in phone (USB cable must be already connected tp PC
You’re now in download mode (Blue Screen)
Press and hold Volume up for 7 sec (bootloader unlock screen)
Pres Volume up to confirm
**Warning** This will now wipe your phone and restart and couple of times but this is normal
When the phone is booted, connect to internet, skip the initial setup, you don't need to sign in to anything
Unlock should be enabled now and greyed out
Congrats you've unlocked your bootloader !
FLASH TWRP + PATCHED VBMETA:
OEM Unlock should be enabled and greyed out already
Download TWRP and patched vbmeta for your device from above links
Boot the phone into download mode (with the phone powered off, press Volume Up + Volume Down at the same time and plugin USB cable)
Press Volume up to continue
Load up ODIN
Go to ODIN options and uncheck auto reboot
Select USERDATA slot and select the TWRP+Patched VBMETA file tar you built (Device Specific)
Click Start and wait for Odin to complete with a PASS message
Now Keep USB cable plugged in, press Volume Down and Power and as soon as the screen goes black press and hold Volume Up and Power
You should now be in TWRP
IN TWRP:
Do a full wipe (wipe > Format Data > type 'yes' when asked and confirm)
Reboot phone back to recovery (Reboot > Recovery)
Download ROM zip files (P1 + P2) and copy them to the phone or to a USB OTG stick
FLASH ROM:
In TWRP click 'Install'
If using OTG click 'select storage', select 'USB OTG'
Browse to the location of the ROM zips, Select P1 zip and swipe to confirm
After flashing P1 zip, browse again to the location of the ROM zips, select P2 zip and swipe to confirm
ALWAYS FLASH P1 + P2 ZIP FILES
Follow the on-screen options
When flashing of P2 zip file is complete, click 'save logs' (for later use)
Click finish
Reboot to System
After flash and setup is completed, download and install Magisk Canary app from Magisk github and install it; when you run for the first time the magisk app will need to do some setup and will then automatically reboot the phone
After reboot you're all set, congratulations !
Spoiler: Updating BeyondROM to latest version
When upgrading FW to flash the latest BR, these are the recommended steps.
It is assumed that you are already on BeyondROM.
Download the latest/required version of the firmware (Samfirm, Frija etc...)
Unzip the stock ROM zip
Boot the phone into Download mode
Load up Odin and uncheck auto-reboot in Odin settings
Insert the relevant files into their slots (BL = BL, AP=AP, CP=CP, CSC=HOME_CSC) **It's important to use HOME_CSC to keep your data intact**
In the USERDATA slot insert your TWRP+Patched VBMETA tar file (Device Specific)
Start Flash
When flashing completes, keep USB plugged in, hold Volume Down + Power, as soon as the screen goes black hold Volume Up + Power pressed to enter TWRP
When in TWRP, flash latest BeyondROM zip files (ALWAYS FLASH P1 + P2 ZIP FILES)
When BR flashing completes, save logs and reboot to system
Enjoy!
Enjoy flashing good people !

reserved

R/W system?

devo partire da quella ufficiale per installare la rom?

ULTRA90 said:
devo partire da quella ufficiale per installare la rom?
Click to expand...
Click to collapse
Is it so difficult to write your comment in english?

Atax85 said:
R/W system?
Click to expand...
Click to collapse
Kind of ... if you want to flash any mod zip in twrp you'll need to flash first both rom zips then your mod zip without rebooting between the flashes

Hello anyone using or tested this rom? How is it compare to Dr ketan full rom? Thanks !

Johnny Eng said:
Hello anyone using or tested this rom? How is it compare to Dr ketan full rom? Thanks !
Click to expand...
Click to collapse
Looking for the same comparison!

V 1.1 is in testing for RW system also I heard the rom is good but I am on drKetan rom at the moment

Somebody try on S911b yet?

Does this Rom have /dev/ttyACM0 and cdc_acm Linux kernel module ?

it has stock kernel

Any of you tried installing viper4android ?

Will this work on 9180? If not what would I need to do to make it work on 0?

When is system RW ready ? Want to try your rom I know it's in testing at the moment I am on drKetan rom

Techguy777 You need to use this version
GitHub - AndroidAudioMods/ViPER4Android: ViPER4Android app configuration files
ViPER4Android app configuration files. Contribute to AndroidAudioMods/ViPER4Android development by creating an account on GitHub.
github.com

PrinceLc said:
When is system RW ready ? Want to try your rom I know it's in testing at the moment I am on drKetan rom
Click to expand...
Click to collapse
Excuse me, without knowing, I'm guessing RW stands for Read Write but what does it actually mean being RW ready ?

The stock file system on S23 is Erofs and read only with RW privileges you can do more with root

Why am I blocked from the telegram conversation? What would be the point of having a telegram thread if people are blocked from using it?

you're probably blocked because you didn't press the button to prove you're human
tell me your username and I'll unblock you

Better Mobile App

welcome