Brothers!!!!!!
Need help for my YU yuphoria... I got a OTA update for lineage 14.1. Downloaded and tried to install via TWRP. But got stuck with TWRP recovery. While click the reboot after installing the Rom, the phone is rebooting again into TWRP. For solving this, i tried with two methods as follows:
1) Tried to run command in TWRP Terminal. But after typing the command, dont know where is the enter button to run this!!!!!!!
2) Also tried to flash a rom through by Qualcomm Flash tool. But failed to this also, because download mode not working!!!!
Need help in an URGENT BASIS!!!!!!!!!!!!!!!!DONT KNOW WHAT TO DO!!!!!!!!!!! PLZZZZZZ
Saravanan Yumasher said:
Brothers!!!!!!
Need help for my YU yuphoria...
<Snip>
Click to expand...
Click to collapse
Why don't you just try flashing a custom rom when you've twrp?
Saravanan Yumasher said:
Brothers!!!!!!
Need help for my YU yuphoria... I got a OTA update for lineage 14.1. Downloaded and tried to install via TWRP. But got stuck with TWRP recovery. While click the reboot after installing the Rom, the phone is rebooting again into TWRP. For solving this, i tried with two methods as follows:
1) Tried to run command in TWRP Terminal. But after typing the command, dont know where is the enter button to run this!!!!!!!
2) Also tried to flash a rom through by Qualcomm Flash tool. But failed to this also, because download mode not working!!!!
Need help in an URGENT BASIS!!!!!!!!!!!!!!!!DONT KNOW WHAT TO DO!!!!!!!!!!! PLZZZZZZ
Click to expand...
Click to collapse
Why don't you try flashing a new ROM like sachin said? Also, did you make sure you didn't download a corrupted file?
Also, I think the enter button of TWRP keyboard is the checkmark in blue...
Saravanan Yumasher said:
Brothers!!!!!!
Need help for my YU yuphoria... I got a OTA update for lineage 14.1. Downloaded and tried to install via TWRP. But got stuck with TWRP recovery. While click the reboot after installing the Rom, the phone is rebooting again into TWRP. For solving this, i tried with two methods as follows:
1) Tried to run command in TWRP Terminal. But after typing the command, dont know where is the enter button to run this!!!!!!!
2) Also tried to flash a rom through by Qualcomm Flash tool. But failed to this also, because download mode not working!!!!
Need help in an URGENT BASIS!!!!!!!!!!!!!!!!DONT KNOW WHAT TO DO!!!!!!!!!!! PLZZZZZZ
Click to expand...
Click to collapse
Is your problem solved? You should reply...
DarkAlpha.Sete said:
Is your problem solved? You should reply...
Click to expand...
Click to collapse
sorry for not replying bro......
Thank you so much for your help.... your solution worked out for me... :good:
Related
Hi,
I worked for install custom recovery. I tried with adb and fastboot methods. adb is working and saw my device but fastboot didnt see it.
Then i installed ROM Manager. It says that 'already recovery(CWM and TWRP) installed' but i cant see my CWM recovery or TWRP.
Only i see stock recovery.
is there anyone for help me?
salcom said:
Hi,
I worked for install custom recovery. I tried with adb and fastboot methods. adb is working and saw my device but fastboot didnt see it.
Then i installed ROM Manager. It says that 'already recovery(CWM and TWRP) installed' but i cant see my CWM recovery or TWRP.
Only i see stock recovery.
is there anyone for help me?
Click to expand...
Click to collapse
Help meeeeee
salcom said:
Help meeeeee
Click to expand...
Click to collapse
There is not CWM or TWRP or Curstom rom for this tablet... For now!
You can try helping
If you want to help out with CWM for this device, visit the link in my signature to find out how. Make sure to read every post
Hi Guys,
I've got a SGP511 WiFi only (castor_windy), with root access and an unlocked bootloader. but to install AOSP 7.1 I need to update my version of TWRP to 3.0.0.
I installed TWRP via TabZ2-lockeddualrecovery2.8.26 batch file and can access recovery but every time i select install look at my SD card and change to images and select the castor_winsy 3.0.0 image i dont get an option to install to recovery i only get kernel how do i resolve this ?
I have re flashed FW (KitKat) via flashtool loads of times
rooted
installed TabZ2-lockeddualrecovery2.8.26 batch file
and every time i get the same option.... cant flash to recovery or boot only kernel
i have attached a screenshot so that nobody thinks i am going mad
can you please help me thanks :fingers-crossed:
It's been a while since I used TWRP 2.8.XX...so no idea what's the issue there but I'd just flash TWRP recovery via fastboot. Worked for me without any problems :good:
T4ke5 said:
It's been a while since I used TWRP 2.8.XX...so no idea what's the issue there but I'd just flash TWRP recovery via fastboot. Worked for me without any problems :good:
Click to expand...
Click to collapse
Hi ... Is that using the ADB fastboot recovery TWRP.img?
I am on KitKat just wondering if that's why it won't work have you got to be on 6.01 ?
Well, actually it shouldn't matter on which Android version you are, but to have the latest boot.img and radio.img installed I'd flash the latest stock ROM available here on XDA which means by the way having TWRP 3.0.2.0 as well and after that you might be ready for AOSP 7.1
Just have look at kulvertti's thread in the "General" subforum. Since you have already intalled a custom recovery there shouldn't be any problems.
Lockeddual recovery is not compatible with any custom rom
Please follow the instructions in the thread
rcstar6696 said:
Lockeddual recovery is not compatible with any custom rom
Please follow the instructions in the thread
Click to expand...
Click to collapse
Hi @rcstar696 have you got a link to the instructions please as I can't seem to find it ... thanks
nickbaker66 said:
Hi @rcstar696 have you got a link to the instructions please as I can't seem to find it ... thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
rcstar6696 said:
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
Click to expand...
Click to collapse
Hi @rcstar6696,
i had no problem flashing the boot.img that part was ok but when i went to flash the recovery it never seemed to work for me, in the terminal window in the SDK programme tools folder which is the same folder as the image i downloaded from your thread is in (Twrp-3.0.0-0-castor-windy.img and twrp_castor_windy.img) it said something about sizes but said it went ok tried to boot into recovery and it never worked
in the terminal window whilst my SGP511 was in fastboot mode i typed fastboot recovery Twrp-3.0.0-0-castor-windy.img is this is correct script or have i got this wrong ?
i am currently on Kitkat does this matter
thansk
nickbaker66 said:
in the terminal window whilst my SGP511 was in fastboot mode i typed fastboot recovery Twrp-3.0.0-0-castor-windy.img is this is correct script or have i got this wrong ?
thansk
Click to expand...
Click to collapse
The right command is
fastboot flash recovery PathToRecovery*
Click to expand...
Click to collapse
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
Cheers guys I'll give that a go
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
rcstar6696 said:
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
Click to expand...
Click to collapse
hi guys i tried what you said and still could get it to work, please see screenshot and check if i have entered something wrong, i dont thinki have but i might be wrong
is it because i have not done the boot image first via fastboot ?
Looks quite good. Did you already try to enter the recovery?
T4ke5 said:
Looks quite good. Did you already try to enter the recovery?
Click to expand...
Click to collapse
i tried to access recovery via the down volume button when the tablet starts up but no green light appears and it just starts normally ...... i ve not flashed the boot.img first then flashed recovery as ive seen it can be done via recovery the only option left now is to try flashing the boot.img first .... i have no option but to try that tonight and see if that can do it that way
@T4ke5 @rcstar6696 thanks very much guys for your help TWRP on 3.0.0 now and AOSP 7.1 installed now
Sweet! :good:
T4ke5 said:
Sweet! :good:
Click to expand...
Click to collapse
Don't laugh but I can't put my WiFi code in because there's no keyboard just tap to speak how can I have the keyboard back lol
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
Cheers mate worked a treat
Hi guys,
Before you say again a topic on a non bricked One Plus X, I would like to let you know that I've checked and try almost all of the tutorial I've seen on xda and one plus forum.
I was on CM14.1 with this ROM : https://forum.xda-developers.com/oneplus-x/orig-development/rom-cyanogenmod-14-onyx-t3452150
Unfortunately, I made the 25-12-2016 update and it totally broke up the phone..
I download the OnePlus X OxygenOS 3.1.4 on the One Plus website. So I flash it on the stock recovery, it tells me "Install success" then I reboot and it stays on the bootlogo.
For information, I can't access the oem unlock menu if needed, but when I ask the oem device info it says unlocked. The phone is detected by the computer sometimes with unknown device and sometimes correctly with the qualcomm drivers..
I have a back up made from TWRP, I can access the device by the fastboot mode, it seems that all the operations written here worked but it doesn't install or even boot on TWRP..
Thanks for your help guys.
Are you using latest TWRP from website think version 3.0.3?
Exodusche said:
Are you using latest TWRP from website think version 3.0.3?
Click to expand...
Click to collapse
I'm not even using TWRP, since I can't boot on it.. But I tried to flash the twrp-3.0.2-2 from blue spark v41, after the installation via Flashboot, it doesn't boot up on the recovery..
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Exodusche said:
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Click to expand...
Click to collapse
Exactly, the phone is stuck on the one plus logo..
defqon_1 said:
Exactly, the phone is stuck on the one plus logo..
Click to expand...
Click to collapse
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Divyesh49 said:
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Click to expand...
Click to collapse
Didn't work. I tried to lock and then unlock to be sure but not is stay in false for tempered AND unlocked.
So I don't have any idea on how make android back on my phone.
I just have access to Fastboot mode. No recovery, nothing else..
EDIT : phone is not starting anymore. I try to charge it hoping it just a low battery problem..
You should send it to RMA
Trimis de pe al meu Redmi 3S folosind Tapatalk
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Help Pls
defqon_1 said:
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Click to expand...
Click to collapse
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Fix It!
Exodusche said:
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Click to expand...
Click to collapse
Done! finally i can reinstall stock rom and recovery with drivers by usb.
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Done
defqon_1 said:
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Click to expand...
Click to collapse
Don't worry i have restored my OPX 5 days ago. I used the method of this video: https://youtu.be/R4SVSovw4Jo and files from this thread: https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 , if it can help someone.
I have a redmi 5 plus. I managed to install TWRP via ADB as suggested by the official page. Then, the phone entered the bootloop. I loaded the ZIPs of a custom rom also from ADB, because I did not have another way, I made the wipes and tried to install the rom. It is version 8.1 AOSPExtended. When I do, I get the error "Assert failed: vince.verify_trustzone (" TZ.BF.4.0.5-152683 ") ==" 1 "" Updater process ended with error: 7. Could someone help me? I can not find the solution!
Thanks in advance
You should try to install twrp_3.2.2-0 again using fastboot, reboot into recovery, mount your device storage, copy ROM you want to install and try to install it.
And you can try method described here.
Have a nice day.
Same problem
I'm having the same issue, did you solve the problem? If you have solved the problem, please can you help me.
When you want to flash AEX flash this bootloader, after this it should going to flash
https://androidfilehost.com/?fid=5862345805528046341
skrubxgt said:
When you want to flash AEX flash this bootloader, after this it should going to flash
https://androidfilehost.com/?fid=5862345805528046341
Click to expand...
Click to collapse
It's working thanks .
Unlocking Bootloader1. Make sure you have a sim and active mobile data. Then go to about phone tap build number 7-8 times. After that go to advanced settings > developer options > turn on OEM unlocking and then check if this device is secure and click add account and device.
2. Download Mi unlock tool from here. Extract it and paste it in C:/unlock. or else your device won't be recognized for unlocking.
3. Open Mi unlock tool and then enter the Mi account which was on your device. Put your device in fastboot mode by pressing vol- and power and then connect to PC. Press unlock and if it tells you to wait you have no other option but to wait. If your mi flash tool shows connect your device even after you have connected it. Follow this guide here.
4. After you have unlocked your bootloader reboot your phone.
Flashing TWRP and Rooting via magisk
1. Download this TWRP image here. Thanks to the original developer mauronofrio.
2. Download adb and fastboot tools here and install it.
3. Now put your phone in fastboot mode and connect it with your pc. Now where you have downloaded the TWRP file rename it to TWRP.img and open a CMD window there if you don't know how just google.
4. Type the following commands
1. fastboot devices
2. fastboot flash recovery TWRP.img
3. fastboot reboot recovery.
Click to expand...
Click to collapse
5. Your phone will boot into TWRP now. But TWRP will be overwritten by stock miui recovery to stop that you need to flash Magisk. Download this zip move it to internal storage then flash by tapping on install and swipe to flash. Reboot your device. Reboot to recovery again to check if TWRP is present.
Now your device is rooted
OR
Flash latest OrangeFox Recovery if you don't want magisk.
Flashing A rom
1. Download.
2. Flash.
3 Format Data.
Done
Feel free to ask any questions. And don't point a finger at me for messing your device.
My mi unlock tool says can't get info. I using Indian version miui 12
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
igeekyayush said:
My mi unlock tool says can't get info. I using Indian version miui 12
Click to expand...
Click to collapse
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Doombuggie85 said:
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
Click to expand...
Click to collapse
Yes, it does.
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
LoadOP2 said:
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Click to expand...
Click to collapse
igeekyayush said:
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
Click to expand...
Click to collapse
Okay keep the sim inserted and use the device for 7 days. And if it doesn't work try using older version of unlock tool.
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
I've unlocked the bootloader using the unlock tool and waited for 7 days,
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Skip the flashing a rom part and you will be good to go.
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
Click to expand...
Click to collapse
You can flash twrp and then check if it persists. If not flash magisk again their is no thing as magisk colliding lol. Just make sure you flash a newer version. And if nothing works flash stock rom and then twrp.
If you have the stock boot IMG flash it and then intsall twrp and magisk.
smsry said:
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
Click to expand...
Click to collapse
LoadOP2 said:
Skip the flashing a rom part and you will be good to go.
Click to expand...
Click to collapse
Haha, makes sense! Thank you for your answers
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
smsry said:
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
Click to expand...
Click to collapse
Yes, If you use a lock screen enter that password it will be decrypted. You will have to format data if you decide to flash any other rom anyway.
flashed twrp but not able to boot into recovery.
igeekyayush said:
flashed twrp but not able to boot into recovery.
Click to expand...
Click to collapse
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Sir ive used xiaomi flashtool v2 after that and it worked. Thanks sir. After that i updated to latest twrp from that chinese one.
LoadOP2 said:
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Click to expand...
Click to collapse
Joyeuse
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
rfguy said:
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
Click to expand...
Click to collapse
Yes Unified means all Snapdragon 720g Devices which include Joyeuse, Curtana, Gram, Excalibur.
Hey buddy, thank you for this quick step-by-step guide. I flash ROMs since 2012 and you know what? It helped me the same. Having all stuff needed for go from stock to custom concentrated in one place (plus some useful tip like the Magisk flash at the end) it's always useful and time-saving. Thank you
2 Micro-notes about fastboot btw:
- write 'fastboot (with lowered 'f'): it may confuse some newbie
- it's 'reboot' instead of 'boot'