Related
Indirect deserves a salute for rooting the NT
http://forum.xda-developers.com/showthread.php?t=1354487
Still running a Nook Color with a dpi of 240 in build.prop, I would very much
get any reports on the following
1. Can the same be done on the NT without too many side affects?
2. Has anyone installed skype and tested the built in Mic?
How about a response as to a rooted Nook Tablet with a higher (240) dpi setting?
speaking completely out of curiosity, how can you display a higher dpi onscreen (if I'm understanding what you're asking), if the display is only capable of 169 dpi?
maybe I'm oversimplifying the question and am not understanding you.
---------- Post added at 01:33 PM ---------- Previous post was at 01:31 PM ----------
after doing some searching, are you referring to actual font size?
Android allows different dp settings independent of the hardware dpi for UI design. Details in below link,
http://developer.android.com/guide/practices/screens_support.html
Density-independent pixel (dp)
A virtual pixel unit that you should use when defining UI layout, to express layout dimensions or position in a density-independent way.
The density-independent pixel is equivalent to one physical pixel on a 160 dpi screen, which is the baseline density assumed by the system for a "medium" density screen. At runtime, the system transparently handles any scaling of the dp units, as necessary, based on the actual density of the screen in use. The conversion of dp units to screen pixels is simple: px = dp * (dpi / 160). For example, on a 240 dpi screen, 1 dp equals 1.5 physical pixels. You should always use dp units when defining your application's UI, to ensure proper display of your UI on screens with different densities.
e.mote said:
Android allows different dp settings independent of the hardware dpi for UI design. Details in below link,
The density-independent pixel is equivalent to one physical pixel on a 160 dpi screen, which is the baseline density assumed by the system for a "medium" density screen. At runtime, the system transparently handles any scaling of the dp units, as necessary, based on the actual density of the screen in use.
Click to expand...
Click to collapse
I understand the advantage to a developer laying out UI that needs to run on different display resolutions, but I don't see an advantage for an end-user. Why would you set your dpi to 240 if you can only display 169 dpi on the device? Won't the tablet simply downsize bit-mapped images when they're actually displayed?
Honest question--I'm probably not understanding something here--and I'm certainly not trying to rile anyone. Thanks!
Per above equation, setting your device's dpi setting to 240 would allow the app to be 150% in size. This aids in legibility, at cost of more screen space.
If you have an NC, you can see this firsthand by adjusting abovesaid dpi setting in build.prop up or down.
e.mote said:
Per above equation, setting your device's dpi setting to 240 would allow the app to be 150% in size. This aids in legibility, at cost of more screen space.
Click to expand...
Click to collapse
Ah, cool. Thanks for the info!
All I wanted to know was if the build.prop can be edited on a rooted NT as I have done on the NC.
Also, I will try once more. Did anyone use the Microphone with skype or some other chat app?
REQUIRED:
Device: Nexus 10 or other devices with a screen larger than 3.5"
OS: 4.2 or 4.3 Jelly Bean
Other: ROOT access with BUSYBOX installed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What does this app do?
It allows to change the resolution and the pixels density of the screen to pre-defined settings according to standard screen aspect ratios
Why is this useful?
- Watching Video on an external monitor/tv using the hdmi output will usually mirror the screen content without correcting for aspect ratio, by setting the correct resolution and pixel density of the screen to match the monitor/tv allows to fill the entire external screen and avoid the side black bars.
- Playing games on an external monitor/tv: normally, the device will render the games to the full resolution available on the device's screen. On the case of the Nexus 10, games will be rendered to its huge resolution of 2560x1600 and then it will be scaled down to the monitor/tv screen resolution wasting GPU prepossessing power and resulting on more heat and power consumption during gaming. By reducing the screen resolution to match the external monitor/tv less processing power is needed to render the game at the lower monitor/tv's resolution, many games will even use the extra processing power available for more effects or more frames per second (depending on the game, no established by this app).
- Simulate other screen resolutions and pixel density for android developers to test their applications on the physical device and observe how their application will look on other devices.
Available options:
-Manual Settings: Allows to manually select the desired resolution and pixel density according to pre-defined standard aspect ratios.
-Auto Detection: Will run in the background and will detect HDMI connections and disconnections. On a HDMI connection detected, a notification will be presented to apply the detected screen resolution and pixel density appropriate for your screen. On a HDMI disconnection, the notification will allow to return to the device's default settings.
Reboot Mode: New Soft Reboot will only reboot the graphical interface not the entire system (Fast). Normal Full Reboot (safest, use if you find interface issues with the Soft Reboot).
Screen Size: Define your screen size (affects dpi calculation). This setting comes pre-defined for the nexus 10, but you should change it to match your screen size on other devices.
HDMI Resolution Preset: Define your preferred output resolution instead of using the Auto-Detection option .
New Default Settings: The default settings will now reset the dpi value to the factory configuration. It appears that the nexus 10 comes from factory with a dpi setup to 320 instead of 300. The new reset feature should also work for other devices.
Auto DPI Selection: No more guessing work, it will select the appropriate dpi value for the selected resolution and the screen size defined on the settings.
Screen OFF feature: Allows you turn your device's screen off while keeping the output to the hdmi to reduce the power usage. To turn the screen back ON just press the power button twice or simply disconnect the hdmi.
Touchless Profile: It applies the profile automatically upon hdmi connection without user interaction.
- The profile can either auto detect the TV resolution or apply the preset resolution
- If selected, it will turn the screen off automatically when the hdmi is in use.
- On hdmi disconnection, the screen settings will automatically return to default.
What is New
New Recovery Feature: Recovers the default screen setting after an user specified number of power/charger connections. Will restore the device if the user applied a configuration not supported by the device.
To trigger the recovery feature, plug and unplug the power/charger to the device allowing ~1s between plug/unplug as many times as defined on the settings menu, default is 3 times.
v1.27:
- New Recovery Feature to restore default setting upon cycling the power connection 3 times at ~1s between connections.
- Fixed interface issues on Nexus 7 2013.
- Support for small screens up to 3.5"
- New first time setup to ensure the user select the appropriate screen size of their devices.
- Added the screen size to the current settings display.
v1.26: Improved the Preset Resolution Input dialog to avoid incorrect inputs.
v1.25: - Improved support for devices that are naturally oriented in portrait mode (i.e. nexus 7, cellphones, etc).
- Added more resolutions, specially to support smaller devices and cellphones.
- Added "Touchless Profile" option.
v1.24: - fixed a crash issue happening on devices that did not have BusyBox installed. if you don't have busybox installed, the app will now prompt you to install it.
- fixed the Auto-Brightness feature that was awakening the screen for some devices on ambient light changes.
- Added Screen Turn OFF request for support on devices where screen turn off is not yet supported.
v1.23:
-Improved screen OFF detection mode to support more devices. Allows you turn your device's screen off while keeping the output to the hdmi to reduce the power usage
v1.22:
-Screen OFF feature.
v1.21:
-Adjusted App's interface for portrait and landscape mode, and smaller screens.
-Back compatibility with JB 4.2
-Added preset button on main application
v1.2:
- Auto DPI Selection.
- Reboot Mode Selection.
- Screen Size Selection.
- HDMI resolution Preset option.
v1.01: Code cleaning
v1.0: Initial Release
Why a reboot is needed to apply the new screen settings?
- For now the safest way to restore the entire Interface with the new resolution and pixel density is to reboot the system. The new Soft Reboot should reduce considerably the time required to reset the interface.
MOD EDIT: Link to Google Play Removed due to XDA advertising paid app/theme policy. OP can check for PM from me.
This sounds like an interesting app!
Gonna try it out, but I have a few questions, does the resolution change happen only when connected to a HDMI output? Are there any benefits to having a lower res for say regular daily use of the tablet, say like not hogging the gpu or lowering the gpu temperature?
Also, according to Xda rules you shouldn't advertise paid apps here, you either have to make a free trial or this post will get removed, but I would love to keep the thread alive...
Sent from my Nexus 10 using Tapatalk 4
s1m4an said:
This sounds like an interesting app!
Gonna try it out, but I have a few questions, does the resolution change happen only when connected to a HDMI output? Are there any benefits to having a lower res for say regular daily use of the tablet, say like not hogging the gpu or lowering the gpu temperature?
Also, according to Xda rules you shouldn't advertise paid apps here, you either have to make a free trial or this post will get removed, but I would love to keep the thread alive...
Sent from my Nexus 10 using Tapatalk 4
Click to expand...
Click to collapse
s1m4an,
I did not know about the paid app rules for posting at this forum; however, I am planning to release a trial or beta version specially to bring support to other devices.
You can change the resolution at any moment (without HDMI connected) by opening the app and selecting the desired resolution and pixel density and then apply the changes.
The HDMI detection just allows you to change the settings to match the detected external screen automatically without having to worry about what resolution and density you should select.
Lowering the resolution will definitely reduce the GPU utilization and GPU power consumption (heat generated) especially at graphic intensive apps like games, even at 1080p the GPU needs to render half the amount of pixels than the default resolution. I have tested this with games and I generally gain frames per second or I am able to increase the detail level of the game effects. In normal usage, GPU utilization will also be reduced but I will imagine that non graphic intensive applications will not give you such drastic difference, probably watching movies will.
Another benefit is that it allows you to test how applications will look on other devices, if you are a developer.
Thanks for the comment,
Yes i would be great if there was a trial version or something like that.. It sounds interesting..
Hi forbitel, I bought your app and I like it so far. Works fine with stock 4.3 and it's a very easy way to have a true full screen 16:9 trough HDMI. Shame to Google for giving a stupid 16:10 aspect ratio to our HDTVs.
I have better results with 16:9 2560x1400 with my tv
Setting 1920x1080 creates a weird interface in the tablet. Looks like a old phone launcher...
What I would like to see in a future update is to set a favourite resolution when HDMI is detected so we don't have to go to the app every time we want to change it.
Good work!
king conan said:
Hi forbitel, I bought your app and I like it so far. Works fine with stock 4.3 and it's a very easy way to have a true full screen 16:9 trough HDMI. Shame to Google for giving a stupid 16:10 aspect ratio to our HDTVs.
I have better results with 16:9 2560x1400 with my tv
Setting 1920x1080 creates a weird interface in the tablet. Looks like a old phone launcher...
What I would like to see in a future update is to set a favourite resolution when HDMI is detected so we don't have to go to the app every time we want to change it.
Good work!
Click to expand...
Click to collapse
king conan, Great Suggestion!, I will add that to the next update.
Thanks,
forbitel said:
king conan, Great Suggestion!, I will add that to the next update.
Thanks,
Click to expand...
Click to collapse
King Conan, the preset option added to the newest update should now do what you want.
forbitel said:
King Conan, the preset option added to the newest update should now do what you want.
Click to expand...
Click to collapse
Yes I saw the update. Thank you!
I'll try in the next hours.
But now I have a problem. I use the keyboard app "Swiftkey Tablet" and even after several reboots, going to default resolution and reinstalling the app, it's size is like 3 times the normal. It's like the app thinks I'm still in 1920x1080 and not in the default 2560x1600. And I can't use it...
The stock keyboard works fine.
I'll post a screenshot later!
Edit:
Maybe reinstalling the app was not the solution (it may keep settings in SDmemory). I'll try to erase app data and reinstall.
Edit 2: Solved.
But I really want to thank you for this app. Now I can use Nexus 10 as decent multimedia player with my TV.
New problem: sometimes I have to apply and reboot up to 3 times to get the desired resolution. I have to test more...
king conan said:
Yes I saw the update. Thank you!
I'll try in the next hours.
But now I have a problem. I use the keyboard app "Swiftkey Tablet" and even after several reboots, going to default resolution and reinstalling the app, it's size is like 3 times the normal. It's like the app thinks I'm still in 1920x1080 and not in the default 2560x1600. And I can't use it...
The stock keyboard works fine.
I'll post a screenshot later!
Edit:
Maybe reinstalling the app was not the solution (it may keep settings in SDmemory). I'll try to erase app data and reinstall.
Edit 2: Solved.
But I really want to thank you for this app. Now I can use Nexus 10 as decent multimedia player with my TV.
New problem: sometimes I have to apply and reboot up to 3 times to get the desired resolution. I have to test more...
Click to expand...
Click to collapse
What specific resolution and density are you trying to set? is it through the main application window or through the hdmi notification?
I see you updated the app again.
First try and success, resolution changed fine.
I'll try more.
With this latest update everything works great. 1 reboot needed to change resolution and its very easy to have a preset one.
Sounds like a really useful app. Unfortunately I don't really want to pay for until I know it works for me. I will probably pay once the app matures after a few updates.
Sent from my Nexus 10 using Tapatalk 4
Well, the updates are coming non stop. It works perfectly fine now and the latest update brought a great new feature: Screen off with hdmi out active.
With this app we can have finally a serious media player with the nexus 10.
Congrats to the developer.
@forbitel
Can you tell me what's the shell command (that you have implemented in the app) to "soft"reboot the GUI?
king conan said:
Yes I saw the update. Thank you!
I'll try in the next hours.
But now I have a problem. I use the keyboard app "Swiftkey Tablet" and even after several reboots, going to default resolution and reinstalling the app, it's size is like 3 times the normal. It's like the app thinks I'm still in 1920x1080 and not in the default 2560x1600. And I can't use it...
The stock keyboard works fine.
I'll post a screenshot later!
Edit:
Maybe reinstalling the app was not the solution (it may keep settings in SDmemory). I'll try to erase app data and reinstall.
Edit 2: Solved.
But I really want to thank you for this app. Now I can use Nexus 10 as decent multimedia player with my TV.
New problem: sometimes I have to apply and reboot up to 3 times to get the desired resolution. I have to test more...
Click to expand...
Click to collapse
How did you solve the keyboard problem? I was seeing the same thing but could not find a solutuion.
And what screen resolution settings are you using now that will work perfectly with your TV?
How did you solve the keyboard problem? I was seeing the same thing but could not find a solutuion.
And what screen resolution settings are you using now that will work perfectly with your TV?
Click to expand...
Click to collapse
mrruin,
I have tested few popular keyboards from the market and found the following:
- Google Keyboard: Adjust the best out all I have tested, it consistently adjust with changes of screen resolution.
- SlideIT: Somewhat adjusting to the screen resolution changes, works better than Swype and SwiftKey.
- Swype: do not dynamically adjust to screen changes, some resolutions works but wont adjust to the screen on 1080p.
- SwiftKey: do not dynamically adjust to screen changes, some resolutions works but wont adjust to the screen on 1080p.
I would recommend you use Google Keyboard when changing the resolution of the device, until these keyboards are fixed for resolution changes.
Where can I get that wallpaper?? That looks really cool.
So when are you going to release the trial betsa version like you said you would ? It has been almost 2 months
Sent from my Nexus 10 using xda app-developers app
Nexus 5 slimport HDMI
Has anyone had any luck changing the HDMI resolution?
On a Nexus 5 or any other device?
I have tried all combination of settings i can think of but it either boot loops or resolution stays on 1080p.
Im guessing when it boot loops with the cable plugged in its trying to output 720p but doesn't like it much.
I'd like to provide some sort of log if would be useful.
normskilight said:
Has anyone had any luck changing the HDMI resolution?
On a Nexus 5 or any other device?
I have tried all combination of settings i can think of but it either boot loops or resolution stays on 1080p.
Im guessing when it boot loops with the cable plugged in its trying to output 720p but doesn't like it much.
I'd like to provide some sort of log if would be useful.
Click to expand...
Click to collapse
normskilight,
I haven't tested the application on 4.4 KitKat yet, I just got my KitKat OTA few minutes ago.
I will test it soon and will get back to you.
Please keep tuned.
Regards,
[[MODS-Please move to Right Section if needed, Sorry if posted in wrong section]]
I have been trying to get used to the DPI adjustments on the GPe ROM. It appears that the default DPI is set at 400 on install but using ROMToolBox (You can use your favourite app to change DPI), I was able to tweak it to the most optimum number and concluded that DPI 289 is the most comfortable to the eye and compatible with Apps. I went all the way down to early 210s and tracked it all the way up but could not find any DPI better than 289 that accommodated the application options menus, the operation of the camera on the default GPe Lock Screen and the much nicer arrangement of the icons on the App Drawer.
You can off course try to experiment with different setups and share your findings but I think I am on to something. Enjoy the Post!
AWFRONT said:
I have been trying to get used to the DPI adjustments on the GPe ROM. It appears that the default DPI is set at 400 on install but using ROMToolBox (You can use your favourite app to change DPI), I was able to tweak it to the most optimum number and concluded that DPI 289 is the most comfortable to the eye and compatible with Apps. I went all the way down to early 210s and tracked it all the way up but could not find any DPI better than 289 that accommodated the application options menus, the operation of the camera on the default GPe Lock Screen and the much nicer arrangement of the icons on the App Drawer.
You can off course try to experiment with different setups and share your findings but I think I am on to something. Enjoy the Post!
Click to expand...
Click to collapse
wrong section bro,btw try set to 290.
Agree. I've set mine to 290 as well
Sent from my C6806_GPe using xda app-developers app
not GPe, but I have SlimKat set to 280, might just tyr 290 to see what the fuss is about
EDIT:
No real difference at 290 compared to 280, except that chrome popped out of tablet mode at 290
I've used all my android phones till now (galaxy nexus, xperia z and now z ultra) at tablet LCD density (half the default setting) - 160 for ZU, rotation locked on landscape, with large font size and at times custom font types too.
Try DPI 260 its perfect
jutley said:
Try DPI 260 its perfect
Click to expand...
Click to collapse
Thanks for the share but as I stated in my original post, if we want to enjoy using our XZU at its best as a GPe ZU, then the lowest DPI we should go for is 289 for the following reasons; Lock screen is intact with camera shortcut visible, Applications Drawer is more unified and certain applications are better handled with their options/menus visible. At DPI 260 The UI is broken, lockscreen is not complete and applications with menus have their menus missing i.e try RealCalc to see what I mean.
I would really like to hear from anyone who can go much lower than the DPI of 289 and share their findings as to whether the above issues could be experienced. If not I really want to push it as low as possible to get the best out of the XZU screen real estate without compromising stability and completeness of the UI features.
AWFRONT said:
Thanks for the share but as I stated in my original post, if we want to enjoy using our XZU at its best as a GPe ZU, then the lowest DPI we should go for is 289 for the following reasons; Lock screen is intact with camera shortcut visible, Applications Drawer is more unified and certain applications are better handled with their options/menus visible. At DPI 260 The UI is broken, lockscreen is not complete and applications with menus have their menus missing i.e try RealCalc to see what I mean.
I would really like to hear from anyone who can go much lower than the DPI of 289 and share their findings as to whether the above issues could be experienced. If not I really want to push it as low as possible to get the best out of the XZU screen real estate without compromising stability and completeness of the UI features.
Click to expand...
Click to collapse
220 dpi definitely starts to break the UI on slimkat where 280 or 290 (camera on locksceen fails at 280 but works at 290) is good for most apps that I use, I then use app settings and bump a few apps down to 220-240 (gmail etc)
How on earth are you capable of doing anything with a DPI under 200? I can't imagine getting anything done with that kind of DPI when I'm walking, or even standing up. 320 (stock) is in my opinion the best since all UI elements are properly sized and they can be tapped on without having to aim for anything.
Sent from my C6833 using Tapatalk
DPI Settings for ASUS ZenFone 3 Ultra [Android 6.0/Marshmallow]
I have just bought my new ZF3U and as with my previous Huawei P8 Max, which was of the same screen size, I went ahead to find the optimum DPI scaling for enabling Tablet Mode and wanted to share my findings with you. As always, use the following ADB commands to achieve the desired change [Remove brackets and simply replace the below number with your desired DPI and use the second code if you want to revert to your default factory DPI.] Rest assured I have tried all the possible DPI settings and depending on your taste and desired experience, the following DPI choices are the only ones worth trying UNLESS you don't like the Tablet Mode, which in that case don't try practicing any of the settings below or if you want objects bigger then simply increase the DPI until you are happy with your DPI scaling to make objects larger. Enjoy!
adb shell wm density [241] && adb reboot
adb shell wm density reset && adb reboot
DPI 217: Full Tablet Mode- Dual SIM Settings Menu inside Phone Settings and Stock Camera Functionality Lost
DPI 241: Medium Tablet Mode- Stock Camera Manual Mode Functionality Lost and Loss of Tablet Functionality for some Applications such as eBay.
DPI 264: Medium Tablet Mode- As DPI 241 but also shows full name of contacts on the ASUS Contacts application whereas other modes will not show complete Contact Name in Portrait mode.
DPI 289: Limited Tablet Mode-High/Near Stock Scaling of Items/Menus which may defeat the whole point of rescaling the UI DPI.
NOTE: On all the four DPI modes listed above, the Tablet mode is enabled on the ASUS Contacts application with the side menu as well as the tablet mode enabling on the phone settings menu.
Hi there! Just a bit surprised, because I also just bough ZF3U to replace faulted P8 Max
Thanks for your observation... Honestly, I like that it have higher density by default and this time I decided to stay with default DPI for now...
Question: what's exactly meant under "Stock Camera Functionality Lost"?
Does that mean it stopped working or something different?
Yes, it means at the lowest dpi the stock camera will not work at all and at 264 you lose the manual settings inside the camera app so the camera app will have limited functionality. I am hoping to revise these dpi tests when Android 7 is eventually released which I very much hope will be soon.
I have just bought 10.8 version and I like it, but was really surprised to find out there is no way to change resolution like for example in this video (I am not allowed to post links, but you can search it on youtube under the name: How to Change Screen Resolution in HUAWEI P20)
Is that a bug of some kind and we may hope that this feature will be introduced in some later EMUI updates?
With developer options enabled you can set a custom DPI, effectively changing your resolution
This method doesn't actually change resolution, just the size of the icons, text etc. You can try and check it yourself with some app like CPU-Z for example.
The only option I found is using ADB commands like "wm size 1200x1920" and "wm density 209". This does truly change resolution and sets appropriate DPI for this resolution at 10.8 display size. Needless to say that this method is cumbersome and besides that DPI value has to be reapplied after each reboot, otherwise it resets and homescreen looks messed up.
But yes, when set correctly to 1200x1920 and 209 DPI it looks good and what's more important games run a lot faster.
So why would Huawei remove the option (which is already present in EMUI 8) to easily change resolution specifically for our device is beyond my understanding.
And here is reply from Huawei support:
Thank you for contacting Huawei. We widely appreciate your preference and we thank you for your email.
Regarding to what you kindly shared to us, we appreciate that you point out this issue, we kindly inform you that your screen resolution is unable to be modified unless it is done through a third party application. Due to this, we have forwarded your request to our Research and Development department. Receiving your feedback and inquiries means a lot to our company, since our only way to improve is through acknowledging our customer's experiences.
Yeah it doesn't change the resolution but your command shouldn't either because the same amount of pixels is used. Changing the resolution is basically only possible with amoleds (which we don't have) because single pixels can be disabled.
So that's probably the reason why the huawei p20 has it and we don't. As for what you are doing it should be the same as changing dpi. Grouping small physical pixels to one bigger virtual pixel, decreasing the amount of different content the tablet has to render and therefor making the tablet run faster.
I was able to set my screen res to something else using a third party app on my note 2 (amoled) but not anymore on the LG g5 (ips LCD)
Hope what I'm trying to say is understandable.
lolmensch said:
Hope what I'm trying to say is understandable.
Click to expand...
Click to collapse
Hehe, my honest answer is not quite. But I would appreciate if you could tell me which DPI should I set in Developer Options to get the same effect as I am getting with "wm size 1200x1920" and "wm density 209" in terms of speed gain and homescreen look (not distorted or messed up, etc).
Edit: Tried changing DPI only without changing resolution today. Result: no speed gain in any games I played.
I'm using this app to change resolution and dpi.
https://play.google.com/store/apps/details?id=com.farmerbb.secondscreen.free
It required root access (I'm using magisk). But author said that it just need adb access for those don't have root. Works brilliantlu on my M5 8.4.
oldpoem said:
I'm using this app to change resolution and dpi.
https://play.google.com/store/apps/details?id=com.farmerbb.secondscreen.free
It required root access (I'm using magisk). But author said that it just need adb access for those don't have root. Works brilliantlu on my M5 8.4.
Click to expand...
Click to collapse
For the M5 8.4, what did you set things to?
Ivanbarker said:
For the M5 8.4, what did you set things to?
Click to expand...
Click to collapse
I created 2 profile. One for casting to TV , other for lower resolution.
Ivanbarker said:
For the M5 8.4, what did you set things to?
Click to expand...
Click to collapse
As far as I undertand to avoid distortion for your 8.4in it should be something like 1920x1200 and 270 DPI.
Though again, as far as I understood, you can play with DPI as much as you like, it doesn't influence game speed or battery drain like resolution does.
oldpoem said:
I'm using this app to change resolution and dpi.
https://play.google.com/store/apps/details?id=com.farmerbb.secondscreen.free
It required root access (I'm using magisk). But author said that it just need adb access for those don't have root. Works brilliantlu on my M5 8.4.
Click to expand...
Click to collapse
Thanks, I am going to check out this app. The problem is that I don't want to root my M5 in order not to void the warranty. So going to try the ADB way and hope permissions will not reset after reboot.
the_zealot said:
Thanks, I am going to check out this app. The problem is that I don't want to root my M5 in order not to void the warranty. So going to try the ADB way and hope permissions will not reset after reboot.
Click to expand...
Click to collapse
After you've lowered your resolution from stock 2560x1600, do you find better battery life?
EDIT: Also if I want to change it back to normal, do I jsut change the resolution back to 2560x1600 and 359 dpi?
Ivanbarker said:
After you've lowered your resolution from stock 2560x1600, do you find better battery life?
EDIT: Also if I want to change it back to normal, do I jsut change the resolution back to 2560x1600 and 359 dpi?
Click to expand...
Click to collapse
I have not been using this tablet long enough to notice major difference in battery drain from changing resolution. I was mostly interested in speed gain in games. But from the fact that there is an option in Settings menu to automatically lower resolution to save battery, I conclude that there must me some (albeit a small) advantage in overall power consumption when using lower resolution.
And yes, to get back your native resolution and DPI, I guess you can either use ADB commands "wm size reset" and "wm density reset", or just set 2560x1600 if you are doing it through an app. As for DPI, it depends on which display settings you use in the Settings menu (large, small, etc.) but the default (factory) one seems to be 480. All this Resolution-DPI stuff seems to be very confusing as for me.
the_zealot said:
And yes, to get back your native resolution and DPI, I guess you can either use ADB commands "wm size reset" and "wm density reset", or just set 2560x1600 if you are doing it through an app. As for DPI, it depends on which display settings you use in the Settings menu (large, small, etc.) but the default (factory) one seems to be 480. All this Resolution-DPI stuff seems to be very confusing as for me.
Click to expand...
Click to collapse
Thanks! I was unaware you could reset it like that!