Related
Moved to https://forum.xda-developers.com/android/apps-games/root-spenboardswitcher-3-4-changing-t3656384
The application is attached.
Changelog:
V3.3
-Improved installer by writing main application directly to /system/ instead of extracting to storage and then moving it.
-Added installation support on marshmallow
V3.2
-Added dynamic installation which will help this application get installed on many devices without any problems
-Added support for jellybean and kitkat devices.
-Should work on Note 2, 3, 4 and 5 and other S-Pen devices now without any problems (all variants, only N910F note 4 variant was tested, please give feedback)
V3.1
-Rewrote the installer. Installer is much more reliable now.
-Rewrote the service from scratch up. No notification, and uses very little power since it only runs when the pen state changes.
-Removed Learning/Static modes because I thought they were redundant.
Click to expand...
Click to collapse
Is there a slightly degraded version of this app that would work for non-rooted devices?
chnzshyguy said:
Is there a slightly degraded version of this app that would work for non-rooted devices?
Click to expand...
Click to collapse
I'm afraid not, there's no way to change the used keyboard without root access.
Excellent..
This app is excellent. Is it possible to add some extra functionality like for Teamviewer and Terminal I want hackers keyboard and the rest swype + dragon.
Thanks for application.
srk_srinivas said:
This app is excellent. Is it possible to add some extra functionality like for Teamviewer and Terminal I want hackers keyboard and the rest swype + dragon.
Thanks for application.
Click to expand...
Click to collapse
I'm glad you like it. There is no known way to detect when an application is opened, which means that the only way to do this is to periodically check for the foreground application (every 5 seconds for example), which would make the application drain too much battery for my liking.
I'll look into it further (maybe there's a way to detect application launch using root), but I can't make any promises.
LegendK95 said:
I'm glad you like it. There is no known way to detect when an application is opened, which means that the only way to do this is to periodically check for the foreground application (every 5 seconds for example), which would make the application drain too much battery for my liking.
I'll look into it further (maybe there's a way to detect application launch using root), but I can't make any promises.
Click to expand...
Click to collapse
Thanks for your kind consideration.
Doesn't work on my Note 5. Keeps telling me to install then reboot.
Iamsci said:
Doesn't work on my Note 5. Keeps telling me to install then reboot.
Click to expand...
Click to collapse
Oh well, I tried to get it to work without trying on a note 5. Could you maybe help me with diagnosing the problem by chatting on Hangouts or something? That would be great.
I'll PM you my gmail if you agree.
Thanks for the feedback!
LegendK95 said:
Oh well, I tried to get it to work without trying on a note 5. Could you maybe help me with diagnosing the problem by chatting on Hangouts or something? That would be great.
I'll PM you my gmail if you agree.
Thanks for the feedback!
Click to expand...
Click to collapse
Yea I'll do what I can to help you.
Iamsci said:
Yea I'll do what I can to help you.
Click to expand...
Click to collapse
Thanks very much. Pm sent.
Sent from my SM-N910F using Tapatalk
LegendK95 said:
Thanks very much. Pm sent.
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
I have this same on my Galaxy Note 2... I bought this application on Google Play store, and not working
dziubutek said:
I have this same on my Galaxy Note 2... I bought this application on Google Play store, and not working
Click to expand...
Click to collapse
Can you please elaborate on the problem you're having? Are you installing 3.2? What problems do you have? Is the app installed? Which version of android are you running?
LegendK95 said:
Can you please elaborate on the problem you're having? Are you installing 3.2? What problems do you have? Is the app installed? Which version of android are you running?
Click to expand...
Click to collapse
Hello
I have Android 4.4.2 on Galaxy Note 2. Application from xda not working and from Google Play Store not working too.
My phone is rooted.
On first I have note: " The application is ready to be installed.. Click..... (...) to proceed", after pressing button I have information: "The application has been installed.... A reboot is required.... "
After reboot, I have again: " The application is ready to be installed.. Click..... (...) to proceed" ....
dziubutek said:
Hello
I have Android 4.4.2 on Galaxy Note 2. Application from xda not working and from Google Play Store not working too.
My phone is rooted.
On first I have note: " The application is ready to be installed.. Click..... (...) to proceed", after pressing button I have information: "The application has been installed.... A reboot is required.... "
After reboot, I have again: " The application is ready to be installed.. Click..... (...) to proceed" ....
Click to expand...
Click to collapse
Did it ask for root on first launch? Delete the application's data and check supersu if root privileges have been granted.
LegendK95 said:
Did it ask for root on first launch? Delete the application's data and check supersu if root privileges have been granted.
Click to expand...
Click to collapse
Yes, it asked me about root privileges and I allowed it on first launch.
I can't delete application data because this button is inactive in a application manager...
Supersu checked, everything is ok.
Is the app compatible with Marshmallow? I can't test it yet, I'm waiting to root because of knox and warranty
It does not work with Note 5 - 6.0.1, I downloaded it from Play Store, run and install, then reboot my phone. After that I run the app again and it still asks me to install.
I will very soon work on a fix for both Jellybean and Marshmallow versions. Sorry for the late reply but was extremely busy.
LegendK95 said:
I will very soon work on a fix for both Jellybean and Marshmallow versions. Sorry for the late reply but was extremely busy.
Click to expand...
Click to collapse
I'm such an idiot. I rooted for your app alone and didn't find this thread until afterward. I have a Note 5 on 6.0.1. Has there been any progress? I'd gladly buy the app. Thanks.
EDIT- Once you click Install, only a fraction of a second passes and it says to reboot. There is no way enough time passes to actually install anything.
A few days ago xda user yk1999 wrote the amazing tutorial, how to enable otg without power supply in our device. Thanks to him for it.
I decided that this method can be a bit complicated for users, so I made a small app to simplify otg enabling, no more need to use terminal.
This app requires root.
XDA:DevDB Information
OTG Enabler, Device Specific App for the Samsung Galaxy S3 Neo
Contributors
nikita36078, yk1999
Source Code: https://github.com/nikita36078/OTG-Enabler
Version Information
Status: No Longer Updated
Current Stable Version: 1.1
Stable Release Date: 2016-07-23
Created 2017-01-20
Last Updated 2018-04-15
Great job! now its really easy
Will this work for galaxy grand 2 or only for s3 neo?
apute said:
Will this work for galaxy grand 2 or only for s3 neo?
Click to expand...
Click to collapse
I don't know, you can try it
Not Working im stock 4.4.2 and root, device: GT-i9301i
triplex92 said:
Not Working im stock 4.4.2 and root, device: GT-i9301i
Click to expand...
Click to collapse
Are you sure that you follow instruction?
Then check in root explorer, do you have this file /sys/kernel/debug/regulator/8226_smbbp_otg/enable?
triplex92 said:
Not Working im stock 4.4.2 and root, device: GT-i9301i
Click to expand...
Click to collapse
Im on 4.4.2 Stock Rom too, rooted, and it worked like a charm
Good Job Bro.....It,s working fine...Excuse for my English
nikita36078 said:
A few days ago xda user yk1999 wrote the amazing tutorial, how to enable otg without power supply in our device. Thanks to him for it.
I decided that this method can be a bit complicated for users, so I made a small app to simplify otg enabling, no more need to use terminal.
Of course, app requires root.
Click to expand...
Click to collapse
Not working in mine. Please help
I tried the app, it worked perfectly,
except that when I was done of course I deactivated the function from the app it self
but, my phone didn't charge via it's usb port, even that i disabled it (coz i know u indicated that i should disable it otherwise it wont charge) and I had to restart the phone completely to get it to charge again.
PS : I'm on stock using the latest PHN 4.4.2 ROM Rooted, and have TWRP installed
nikita36078 said:
A few days ago xda user yk1999 wrote the amazing tutorial, how to enable otg without power supply in our device. Thanks to him for it.
I decided that this method can be a bit complicated for users, so I made a small app to simplify otg enabling, no more need to use terminal.
Of course, app requires root.
Click to expand...
Click to collapse
hi im in cm12.1
its worked but my flash memory just got power i dont had my files in memory!
please help me
Working fantastically on my S3 Neo GT-I9301I. No problem at all.
m.h.k.jahromi said:
hi im in cm12.1
its worked but my flash memory just got power i dont had my files in memory!
please help me
Click to expand...
Click to collapse
It seems that not all the types of flash memory works properly.
nikita36078 said:
It seems that not all the types of flash memory works properly.
Click to expand...
Click to collapse
But i try philips,hp,sony,kingmax flash memorys
and two keyboards
And all of them are just got power from my phone
and i dont had access to my files in my flash memorys.
Do you had access to your files?
m.h.k.jahromi said:
But i try philips,hp,sony,kingmax flash memorys
and two keyboards
And all of them are just got power from my phone
and i dont had access to my files in my flash memorys.
Do you had access to your files?
Click to expand...
Click to collapse
Yes, I tested it with AData and Emtec USB-flash. I'm on CM12.1 from nikolaa.
I tested with usb flash drive,external hard drive,zaza remote,mouse,keyboard and joystick and it is working good.
@Pavlex4 , pls stop spamming in all threads your problem, ok?
igor40151 said:
@Pavlex4 , pls stop spamming in all threads your problem, ok?
Click to expand...
Click to collapse
Yes.
Thank you so much @nikita36078
Sent from my SM-G935F using XDA-Developers mobile app
Pro Cal said:
I tried the app, it worked perfectly,
except that when I was done of course I deactivated the function from the app it self
but, my phone didn't charge via it's usb port, even that i disabled it (coz i know u indicated that i should disable it otherwise it wont charge) and I had to restart the phone completely to get it to charge again.
PS : I'm on stock using the latest PHN 4.4.2 ROM Rooted, and have TWRP installed
Click to expand...
Click to collapse
All works perfect, but only problem with turn off and charging not work. Need is restart phone to charge. Fix this bug. My nik60 rom 5.1.1.
!!THIS IS NOT MY WORK, IT'S SHARING ONLY FROM A CHINESE BOARD!!
I found this ROM on a Chinese board, this is a build from 12.09.2016 of Cyanogenmod 13 [For Redmi 3S] by the Chinese developer Po.Chan (not me) all credits go to him
Download:
Link unlock password: 8m9g
https://pan.baidu.com/s/1hr3tR7Y
Installation:
Flash using Recovery with full wipe, as usual
Original source: http://bbs.wisenjoy.com/forum.php?mod=viewthread&tid=554706&highlight=3S
Enjoy~
BUGS: The ROM comes with the usual bugs (no video recording etc.), but as reported they can be fixed for the most/completely, using the common .zip for RR
Tried it yesterday:
Microphone not working with apps like Google search : ' cannot access microphone'
Vidéo not working too because cannot connect media, i think it is linked with the microphone.
Beside this it works (call, sms, wifi, LTE,... )
We have to wait for the good kernel...
Is there any improvement from that flour_mo cm13 in it?
np20feb said:
Is there any improvement from that flour_mo cm13 in it?
Click to expand...
Click to collapse
Don't know if I had flour mo or the other one if xda thread, but this was better IMHO. Seems better coded
Could somebody probide a mirror? Google drive or mega upload? Thanks!
I have been trying to download from this site but no luck. It goes fine upto the captcha part but entering thr captcha does nothing.
So if anyone has been able to download this rom, please upload it to another site.
Aronuser said:
Don't know if I had flour mo or the other one if xda thread, but this was better IMHO. Seems better coded
Click to expand...
Click to collapse
ok then,i will give it a try.I used flour_mo cm13 for a week ,lets try this one.
update: need alternate downloading link asap !!
redmi 3 only
This thread is for redmi 3. And this one is for redmi 3s!
Remi 3 only shares rom with redmi 3 pro and redmi prime.
archtan said:
This thread is for redmi 3. And this one is for redmi 3s!
Remi 3 only shares rom with redmi 3 pro and redmi prime.
Click to expand...
Click to collapse
Buddy, there is no separate subforum for redmi 3s. So all posts regarding it are posted in Redmi 3 and are tagged with redmi 3s to avoid confusion.
lcarolo said:
Tried it yesterday:
Microphone not working with apps like Google search : ' cannot access microphone'
Vidéo not working too because cannot connect media, i think it is linked with the microphone.
Beside this it works (call, sms, wifi, LTE,... )
We have to wait for the good kernel...
Click to expand...
Click to collapse
You're saying calls work? No shut down after or before a call? As with the other CM version?
Ptmaroct said:
I have been trying to download from this site but no luck. It goes fine upto the captcha part but entering thr captcha does nothing.
So if anyone has been able to download this rom, please upload it to another site.
Click to expand...
Click to collapse
Same problem here hehe... Gonna give it another try and share if it works
Robin>Hood said:
You're saying calls work? No shut down after or before a call? As with the other CM version?
Same problem here hehe... Gonna give it another try and share if it works
Click to expand...
Click to collapse
I didn't face any issues with phonecalls, just signal maybe was lil bit weaker than on latest chinadev beta
Aronuser said:
I didn't face any issues with phonecalls, just signal maybe was lil bit weaker than on latest chinadev beta
Click to expand...
Click to collapse
Sensors working for you?
sheshuvadrevu said:
Sensors working for you?
Click to expand...
Click to collapse
Sorry, I don't know. I didn't keep it long, because I need VoIP.
sheshuvadrevu said:
Sensors working for you?
Click to expand...
Click to collapse
Other than that, you could try the fix of the RR rom, if sensors not working. Likely, it'll then work.
Aronuser said:
Other than that, you could try the fix of the RR rom, if sensors not working. Likely, it'll then work.
Click to expand...
Click to collapse
I've tried the fix for rr but it didn't work on this Rom, cpuz is not showing any sensor.
Sent from my Redmi 3S using Tapatalk
sheshuvadrevu said:
I've tried the fix for rr but it didn't work on this Rom, cpuz is not showing any sensor.
Sent from my Redmi 3S using Tapatalk
Click to expand...
Click to collapse
Oh, sorry to hear
Aronuser said:
Oh, sorry to hear
Click to expand...
Click to collapse
It didn't work even on RR for me
Sent from my Redmi 3s using Tapatalk
sheshuvadrevu said:
It didn't work even on RR for me
Sent from my Redmi 3s using Tapatalk
Click to expand...
Click to collapse
Then you're doing something wrong, it works for RR if ur doing it right, I tried it. Make sure to set permissions properly. You can find threads on XDA about how to set those permissions.
Aronuser said:
Then you're doing something wrong, it works for RR if ur doing it right, I tried it. Make sure to set permissions properly. You can find threads on XDA about how to set those permissions.
Click to expand...
Click to collapse
Hi
please help me
my phone Redmi 3s unlocked TW recovery
i flashed zip file super su from recovery
but i cant set permissions properly it says the frimware does not allow
and in lucky patcher when i want patch app it says you dont have a 100% root
i flash super su 2.71 ~ 2.78 and root checker says ROOT ok
rtmreza said:
Hi
please help me
my phone Redmi 3s unlocked TW recovery
i flashed zip file super su from recovery
but i cant set permissions properly it says the frimware does not allow
and in lucky patcher when i want patch app it says you dont have a 100% root
i flash super su 2.71 ~ 2.78 and root checker says ROOT ok
Click to expand...
Click to collapse
You'll find the option to activate root in the latest cyanogen ROM's in the developer options, tap the build number in phone information 7 times and the developer options get activated in settings. Look for the setting root access, chose "Apps and ADB" there. You don't need to flash SuperSU
Hello you all developers how are you.
Recently I was using Oppo F1S That device had a battery daring problem I sold that out.Now I am using Redmi Note 4.
But I found ColorOS 3.0 is aowsome look like iOS so I request you to best developers in the world to port ColorOS 3.0 for RN 4.
Ahhm someone already using this check it out.
But we need world's best developers checked OS.
It is in Chinese I can't get what is it
Check it out
Web:::
http://www.miui.com/forum.php?mod=v...ilter=typeid&typeid=5935&typeid=5935&mobile=2
Abubakar Wander said:
Hello you all developers how are you.
Recently I was using Oppo F1S That device had a battery daring problem I sold that out.Now I am using Redmi Note 4.
But I found ColorOS 3.0 is aowsome look like iOS so I request you to best developers in the world to port ColorOS 3.0 for RN 4.
Ahhm someone already using this check it out.
But we need world's best developers checked OS.
It is in Chinese I can't get what is it
Check it out
Web:::
http://www.miui.com/forum.php?mod=v...ilter=typeid&typeid=5935&typeid=5935&mobile=2
Click to expand...
Click to collapse
Lol.... What a post...??
---------- Post added at 07:57 PM ---------- Previous post was at 07:49 PM ----------
Here u go. Website translated in English...
https://translate.googleusercontent...bile=2&usg=ALkJrhjIi8G2SUvWNPxtHzbDD0QRyL25rA
Can someone mirror it to google driver or something?
If that's the same zip, which has been released on xda (Thread closed for now), do not install it as ColorOS Installation makes some of sensors to fail. So, better stick to Miui or flash a custom Rom or whatever you want, but do not install colorOS.
This ROM is for (mido), your mobile phone is MediaTek or Qualcomm 625? If you are MediaTek you can not install this ROM!
I am from MIUI China Forum
i download and install but stuck on Oppo boot logo i have 4GB Mido version any onle please help or any developer please make it
or all.
here is mirror link https://www.mediafire.com/?ejqhwc5njgaa2ai
For me sensor is working no issue at all
You need to format data after install the rom to not make your phone bootloop
Tested on my phone mido 3 gb
akino553 said:
For me sensor is working no issue at all
You need to format data after install the rom to not make your phone bootloop
Tested on my phone mido 3 gb
Click to expand...
Click to collapse
working only 3gb version my friend have it its working on his mobile but not my
i install properly
anyone try on 4GB version
rashmi0733 said:
working only 3gb version my friend have it its working on his mobile but not my
i install properly
anyone try on 4GB version
Click to expand...
Click to collapse
had a quick testing... everything is working no major bugs...
some highlights-
RIL
VoLTE
Google apps supported(u just need to install google play services one time)
camera is awesome
great battery backup
very less bloatware (can b removed easily)
hope it helped
plz give a thumps up if helpful....
No volte ?
how to get Google play services?
Otherwise no problem.
Anybody has any solutions?
drmuruga said:
how to get Google play services?
Click to expand...
Click to collapse
Download and install OpenGAPPs "pico". Make sure you download the installer for the correct Android version.
nicks.1106 said:
had a quick testing... everything is working no major bugs...
some highlights-
RIL
VoLTE
Google apps supported(u just need to install google play services one time)
camera is awesome
great battery backup
very less bloatware (can b removed easily)
hope it helped
plz give a thumps up if helpful....
Click to expand...
Click to collapse
Plz help give download link I will downloaded from MediaFire it's stucks on opposite boot logo
I can flash color os as secondary in multirom, everything work well, but volte didn't work.
drmuruga said:
I can flash color os as secondary in multirom, everything work well, but volte didn't work.
Click to expand...
Click to collapse
U have to activate volte in setting->call
drmuruga said:
No volte ?
how to get Google play services?
Otherwise no problem.
Anybody has any solutions?
Click to expand...
Click to collapse
Volte is there buddy...u just need to activate it...
And install Google play services apk file...that's it
Sahil132 said:
Plz help give download link I will downloaded from MediaFire it's stucks on opposite boot logo
Click to expand...
Click to collapse
Follow these steps to successfully flash the ROM...
nicks.1106 said:
U have to activate volte in setting->call
Click to expand...
Click to collapse
Thanks a lot.
---------- Post added at 08:14 PM ---------- Previous post was at 08:14 PM ----------
nicks.1106 said:
Volte is there buddy...u just need to activate it...
And install Google play services apk file...that's it
Click to expand...
Click to collapse
Thanks a lot.
Installation Step By ""nicks.1106""
1.wipe everything (system, cache,data)
2.flash cm13 firmware
3.flash cm13( do not boot)
4.flash color os
5.(optional) if u r facing sensor bugs then flash the sensor fix zip...
6.thats it
Note:- i formated my data(intern memory) before so that I can remove password on booting... sometimes this causes bootloop...
So if u have this password on boot, then better backup ur important stuff and format ur internal memory...
Link Sensor Fix https://www.mediafire.com/?7uyfg885efc7h25
wow! color os without google is very nice experience. i can use facebook, whatsup ,chrome etc also. any possibility to register in oppo ?
flash miui 8.2 firmware, flash color os as secondary in multirom (quark os is primary) ,reboot,im not format data( but first time when i flash as primary ,formatted data also ).No google services. Backup account is only needed.
Do i really have to install cm13 first? Im aware of failing sensors but i just wanna try it out
Hi all,
Here is a new port of MIUI Global Stable for the K5+
Version 9.6.2.0 : https://drive.google.com/open?id=1-tpSad_7gUgkCv-xWGGe0NOP8YqorML5
Old version (9.5.2.0) : https://drive.google.com/open?id=1RSP-n-cPk9DLoS3_afc_E4jggtW2EIlt
All Play Store apps removed :
Calculator
Chrome
Drive
FileExplorer
Gmail
GoogleTTS
Hangouts
Maps
Google Music
Google Photos
Talkback
Google Videos
Youtube
Google search app
App Vault
Mi Drop
how much time does it take on first boot ?
ayaanshaitaan said:
how much time does it take on first boot ?
Click to expand...
Click to collapse
I would say around 20mn
Sent from my Vibe K5 Plus using XDA Labs
not working
just hanged
sahilgupta0804 said:
not working
just hanged
Click to expand...
Click to collapse
On which screen ? White Lenovo or black MIUI ? If it's the second one, I would advise to wait a little longer...
Sent from my Vibe K5 Plus using XDA Labs
adinechin said:
On which screen ? White Lenovo or black MIUI ? If it's the second one, I would advise to wait a little longer...
Click to expand...
Click to collapse
White lenovo
ayaanshaitaan said:
White lenovo
Click to expand...
Click to collapse
Are you sure you have a K5+ (a6020a46) ? Have you tried opening or decompressing the file before flashing it to check it's not corrupted ?
Sent from my Vibe K5 Plus using XDA Labs
adinechin said:
Are you sure you have a K5+ (a6020a46) ? Have you tried opening or decompressing the file before flashing it to check it's not corrupted ?
Click to expand...
Click to collapse
Good evening.
I would like to confirm the correct operation of this ROM on my Vibe K5+ A6020a46
Only problem: Cannot find right driver for ADB interface on my win7 32bits, despite USB debugging options ON, OEM enabled and fastboot enabled.
LittleCoyote said:
Good evening.
I would like to confirm the correct operation of this ROM on my Vibe K5+ A6020a46
Only problem: Cannot find right driver for ADB interface on my win7 32bits, despite USB debugging options ON, OEM enabled and fastboot enabled.
Click to expand...
Click to collapse
Hi, I've seen both this message and your private messages
I don't understand what your problem is : your phone is not recognized by your PC or you don't know how to switch on USB debugging ?
Sent from my Vibe K5 Plus using XDA Labs
adinechin said:
Hi, I've seen both this message and your private messages
I don't understand what your problem is : your phone is not recognized by your PC or you don't know how to switch on USB debugging ?
Click to expand...
Click to collapse
Hi. No, this is'nt an access problem.
My windows don't recognize the interface ADB in normal mode (direct connection)
It's not so bad. It's just to use, possibly, adb functions. However I arrived there using a terminal, but only in recovery mode (under TWRP). Is this normal?
Otherwise, I am extremely satisfied. I even think I'm going to adopt MIUI. :fingers-crossed:
See image !
PS: I'm waiting for the next version :good:
LittleCoyote said:
Hi. No, this is'nt an access problem.
My windows don't recognize the interface ADB in normal mode (direct connection)
Click to expand...
Click to collapse
Do you have the drivers of the phone installed on your PC ? I think it should include adb. Or try updating via windows update.
PS: I'm waiting for the next version :good:
Click to expand...
Click to collapse
Me too but I'm depending on updates for the Xiaomi Redmi 3
But updates are mainly about changes on MIUI itself, it's a shame that security patches are not integrated along...
Sent from my Vibe K5 Plus using XDA Labs
adinechin said:
Do you have the drivers of the phone installed on your PC ? I think it should include adb. Or try updating via windows update.
Me too but I'm depending on updates for the Xiaomi Redmi 3
But updates are mainly about changes on MIUI itself, it's a shame that security patches are not integrated along...
Click to expand...
Click to collapse
Hello !
1 / Of course I tested all versions of the drivers. Not everyone has recognized the ADB interface.
This is confirmed on the left screen of my previous posted image.
2 / Windows updates are complete.
3 / The problem certainly comes from my smartphone. I had it already routed, unbricked and with a Lineage 14 custom rom.
However, with actual ROM and despite the OEM enabled option, the "fastboot OEM unlock" command returns "... OEM not allowed".
4/ This remains secondary and doesn't affect the ROM. I'm just trying to understand why.
I have access to adb commands in another way.
Thank you for your help anyway.
Did you see this theme (for the drivers and not only)?
https://forum.xda-developers.com/k5-plus/how-to/noob-guide-flash-lenovo-devices-to-stock-t3442086
LittleCoyote said:
Hello !
1 / Of course I tested all versions of the drivers. Not everyone has recognized the ADB interface.
This is confirmed on the left screen of my previous posted image.
2 / Windows updates are complete.
3 / The problem certainly comes from my smartphone. I had it already routed, unbricked and with a Lineage 14 custom rom.
However, with actual ROM and despite the OEM enabled option, the "fastboot OEM unlock" command returns "... OEM not allowed".
4/ This remains secondary and doesn't affect the ROM. I'm just trying to understand why.
I have access to adb commands in another way.
Thank you for your help anyway.
Click to expand...
Click to collapse
I've read several posts about OEM unlock, but I never had to do it, and I regularly go back and forth between stock ROM with qfil and custom ones...
For your drivers problems, I cannot help you I'm on W10 and I never had drivers problems...
Sent from my Lenovo Vibe K5 Plus using XDA Labs
Hi @adinechin are there any bugs in the ROM? Is it rooted? Is it VoLTE enabled? And what's battery life?
I know that's lot of questions but i hope you answer it. Thanks.
Also tell if i can flash it via twrp 3.2.1.
Thanks again.
Achal09 said:
Hi @adinechin are there any bugs in the ROM? Is it rooted? Is it VoLTE enabled? And what's battery life?
I know that's lot of questions but i hope you answer it. Thanks.
Also tell if i can flash it via twrp 3.2.1.
Thanks again.
Click to expand...
Click to collapse
Hi, I'll try to answer :
- bugs, I don't think so, appart from the contrast that goes back to an automatic setting after a reboot, and sometimes the phone runs slow and you have to kill some apps
- it is not rooted
- for VoLTE I don't know, I never used it
- for battery I'd say it's decent : I can last around 1,5 days with a standard use (but it's my use)
Sent from my Lenovo Vibe K5 Plus using XDA Labs
adinechin said:
Hi, I'll try to answer :
- bugs, I don't think so, appart from the contrast that goes back to an automatic setting after a reboot, and sometimes the phone runs slow and you have to kill some apps
- it is not rooted
- for VoLTE I don't know, I never used it
- for battery I'd say it's decent : I can last around 1,5 days with a standard use (but it's my use)
Sent from my Lenovo Vibe K5 Plus using XDA Labs
Click to expand...
Click to collapse
Thanks bro
I have been testing this ROM since morning and it is awesome. There are no flaws in the ROM. Battery is also great.
VoLTE is also working great. It's not rooted, i rooted it with Magisk but it doesn't pass safetynet.
The only problem is the 0% screen brightness issue. The screen goes off blank completely.
Hey @adinechin if you could fix it. It is a great rom.
Achal09 said:
I have been testing this ROM since morning and it is awesome. There are no flaws in the ROM. Battery is also great.
VoLTE is also working great. It's not rooted, i rooted it with Magisk but it doesn't pass safetynet.
The only problem is the 0% screen brightness issue. The screen goes off blank completely.
Hey @adinechin if you could fix it. It is a great rom.
Click to expand...
Click to collapse
Thanks for your feedback Unfortunately I don't know any fix, I am not a developer, and developing on MIUI is not as easy as other ROMs because the code is closed
Sent from my Vibe K5 Plus using XDA Labs
I clicked this rom and now it does not go out of the way and I have already popped other roms and the problem persists any solution?