Related
Hey all, I've got my springboard running JB and using TWRP for recovery. Anyone available to tell me how to put it back to completely stock if I wanted to sell it? that would be really cool. I'd even be happy with keeping TWRP and putting a stock rom (t-mobile) back on it too. Thanks! any help is appreciated.
Flash this http://forum.xda-developers.com/showpost.php?p=30905023&postcount=15
Corn Flake said:
Flash this http://forum.xda-developers.com/showpost.php?p=30905023&postcount=15
Click to expand...
Click to collapse
Those aren't flashable zips, as best I could tell, are they? flashable through TWRP i mean. do you have any further instruction? thanks for your help so far
fimanmd said:
Those aren't flashable zips, as best I could tell, are they? flashable through TWRP i mean. do you have any further instruction? thanks for your help so far
Click to expand...
Click to collapse
So, if anyone cares, I did figure out how to get it back to stock from TWRP and CM10. I had reflash stock recovery and then used the usual dload folder update process with the stock tmobile update the can be found in the dev section. Let me know if anyone has questions. Mine is now fully 100% stock.
@fimanmd: How did you reflash the stock Bootloader?
u need unzip stock rom zip first, because stock recovery in it.flash stock recovery and recovery2 in fastboot.then copy stock rom to sdcard2's root folder. now u can flash it use stock recovery.
Sent from my HUAWEI MediaPad using xda premium
extract out file recovery.img from stock's update.zip. put it on your PC. put the update.zip on your root microSD. then connect your tab to PC and restart it to fastboot mode (bootloader mode). then run command prompt and type this:
fastboot flash recovery recovery.img
fastboot flash reciovery2 recovery.img
fastboot reboot
after reboot your device must begin flashing stock's ROM
Hello,
I need a stock recovery and stock rom for Huawei ShotX (p 7i)
version ATH UL-01
I searched google but unfortunately ineffectively, maybe someone has a link to the above?
shaq8 said:
Hello,
I need a stock recovery and stock rom for Huawei ShotX (p 7i)
version ATH UL-01
I searched google but unfortunately ineffectively, maybe someone has a link to the above?
Click to expand...
Click to collapse
I think you should flash the stock firmware
ok, but how? I currently have twrp not a stock recovery. from what I read to reflash stock rom, should have stock recovery because at trwp can not be done. I understand that as a stock firmware You understand the stock rom? or maybe something else?
@shaq8 you posted in the wrong forum buddy.
But to answer your question I found a Lollipop stock package for your device.
Thanks for the link DigiGoon
but how to flash new firmware? All descriptions refer to the dload method, which I can not use because I do not have stock recovery. Is there any method to reflash new firmware having trwp instaled?
and in fact my mistake. the topic was to be started in the P7 section. If an admin will go on this thread , please transferred to the Huawei P7 section
shaq8 said:
Thanks for the link DigiGoon
but how to flash new firmware? All descriptions refer to the dload method, which I can not use because I do not have stock recovery. Is there any method to reflash new firmware having trwp instaled?
and in fact my mistake. the topic was to be started in the P7 section. If an admin will go on this thread , please transferred to the Huawei P7 section
Click to expand...
Click to collapse
No worries, I'll help you regardless of in which section your thread resides.
So, to flash the UPDATE.APP, follow these steps:
First download the package from the link I provided.
Extract it, and find UPDATE.APP
Now you have to extract the stock recovery from UPDATE.APP using Huawei UPDATE Extractor tool.
After pulling recovery.img you have to flash it to your device via bootloader.
Boot into bootloader mode and flash the recovery by firing this command:
Code:
fastboot flash recovery recovery.img
Now you have Stock recovery installed.
I hope you are on Lollipop only, if your device was rooted, you have to first flash .img files manually and then force update it via UPDATE.APP.
If your device is not rooted then put the UPDATE.APP in dload folder in your External SDCARD, and press the three button combo after switching off your device, the update process will start then.
I hope this clears something.
the phone has root.
Custom recovery already loaded and working.
I understand that now I have a reflash of all files from update.app? the sequence of flashing files has any meaning?
I ask because I would not want to mess up more in the phone
shaq8 said:
the phone has root.
Custom recovery already loaded and working.
I understand that now I have a reflash of all files from update.app? the sequence of flashing files has any meaning?
I ask because I would not want to mess up more in the phone
Click to expand...
Click to collapse
No, you can flash them in any sequence. It doesn't effect in any way.
everything works, phone alive
DigiGoon thank you very much for your help, you saved my life
i have the same broblam but i did not understand anything
I got it fixed by just flashing the stock recovery instead of full ROM.
Stock Recovery here :
https://forum.xda-developers.com/honor-7/development/recovery-huawei-shot-x-aka-honor-7i-t3548163
i hve update my device huawei ATH-TLOOH,but when i try to reflash it through bootloader,it show error(Unlock frp first)
But by device is not started,i try to unlock it through frp erase tool bt it asks 16 digit unlock key,
my mobile is hong kong made,i cant find imie num bcz on the back of my mobile there is chinese language and no imie num is written...
em suck and helpless cant understand what to do...
cant find exact firmware version but if find it says software installation failed also...plz help me
I need help getting back to stock recovery on my h7.
I have twrp right now and basically, i need a way to flash stock recovery without a pc since i don't have access to one anymore.
Any help would be appreciated
I have version B140 eu,bootloader unlocked,rooted with xposed
You will need to find the b140 recovery file some where but there is a official twrp app in the playstore that can flash your recovery (Even if the file isn't twrp).
Edit: I have attached the recovery from B330 (From the UK build. not eu or us) I think it should just work even if your on a different emui version since it work independently but I'm not sure so do it at your own risk.
0v3r cl0ck3d said:
You will need to find the b140 recovery file some where but there is a official twrp app in the playstore that can flash your recovery (Even if the file isn't twrp).
Edit: I have attached the recovery from B330 (From the UK build. not eu or us) I think it should just work even if your on a different emui version since it work independently but I'm not sure so do it at your own risk.
Click to expand...
Click to collapse
my personal suggestion is not to mess with different recoveries unless you know that wont hurt to flash, that can lead full bricking device....
thelous said:
my personal suggestion is not to mess with different recoveries unless you know that wont hurt to flash, that can lead full bricking device....
Click to expand...
Click to collapse
You could still just go into bootloader mode and flash everything back to stock (Although a pc would be needed).
I have the b140 recovery and i saw 3 apps. Flashify,rashr,flashFire. I was going to try flashify yesterday but didn't because im afraid my whole device may brick. What do u think? Should i try? Which app then? :/
hey! i accidentally deleted a backup for my device and now i have no system to boot off of
are there any roms available for mya-l11? all the ones i see on this sub are for the 2015 models. thanks
lbxda said:
hey! i accidentally deleted a backup for my device and now i have no system to boot off of
are there any roms available for mya-l11? all the ones i see on this sub are for the 2015 models. thanks
Click to expand...
Click to collapse
I could not find any custom Roms for your device.
I could find an stock Rom for the Mya-l41 trough.
Here is an link: https://mega.nz/#!wKpT1ZaS!CV-2E4sNnUwIurskAdqCDpDawWlZD2UeABtSELk_ffc
That should be an update.app or an flashable zip.
You may get Huawei Update Extractor and extract the system.img and boot.img of the update.app
After that flash system.img and boot.img from fastboot.
Warning. This may soft brick your device.
Good luck.
If i helped press the Thanks button
Thespartann said:
I could not find any custom Roms for your device.
I could find an stock Rom for the Mya-l41 trough.
That should be an update.app or an flashable zip.
You may get Huawei Update Extractor and extract the system.img and boot.img of the update.app
After that flash system.img and boot.img from fastboot.
Warning. This may soft brick your device.
Good luck.
If i helped press the Thanks button
Click to expand...
Click to collapse
i was able to flash the boot and recovery image, but i couldnt flash the system image
lbxda said:
i was able to flash the boot and recovery image, but i couldnt flash the system image
Click to expand...
Click to collapse
Does it show an error or anything?
Fastboot flash system system.img
ok, so i found what i thought was a stock rom for my device on some spanish forum and used sp flash tool to install it
problem is, sp flash tool formatted my phone, but encountered an error trying to install the firmware and now my phone wont boot and windows says its not recognised
is there any fix to this? or is my phone bricked?
hey again! i know this post has been a wild ride of me doing stupid stuff and bricking my phone, but i got the firmware back!
only catch is that i'm receiving some nvram error (which i got on my previous phone too. i swear this is the last time im going mediatek), so if anybody has a method that can fix this it'd be highly appreciated
thanks
Hi, Ibxda.
Can you please share with us where you found the stock rom, what went wrong with flashing, and how you managed to get the firmware back?
I have a running system, but I rooted it and cannot apply official upgrades. I'd like to go back, upgrade and root again. I would appreciate the info on your progress.
ifrag_svk said:
Hi, Ibxda.
Can you please share with us where you found the stock rom, what went wrong with flashing, and how you managed to get the firmware back?
I have a running system, but I rooted it and cannot apply official upgrades. I'd like to go back, upgrade and root again. I would appreciate the info on your progress.
Click to expand...
Click to collapse
You should root with Magisk, it's systemless and it should not affect updates. If you want to update you should flash stock recovery. After you updated you are free to flash Twrp again if you want. If you are rooted with SuperSU you should uninstall SuperSU and install Magisk
Hello XDA developers, I'm in urgent and I have a really big problem. It sounds funny but, I deleted my realme ui recovery ,_,
I was trying to install PPUI 4.1 on my Realme 7 but I saw a tutorial that you have to erase the recovery to install TWRP. Please, I need a solution of how can I get it back. I also tried flashing a lot of recoveries and their vbmeta but nothing works. Sadly.
Edit: I'm on RMX2151_11_C.17 | Realme UI 2.0 Latest version
Here is the stock recovery
Chenes said:
Here is the stock recovery
Click to expand...
Click to collapse
You sure? I'm on RMUI2.0 and how do I flash it? Can I type 'fastboot boot recovery.img'? Are my data will be wiped?
Sorry for a lot of questions, haha
iOussamato_ said:
You sure? I'm on RMUI2.0 and how do I flash it? Can I type 'fastboot boot recovery.img'? Are my data will be wiped?
Click to expand...
Click to collapse
From what I read before, fastboot boot will only boot to that recovery file temporarily but I haven't tried it myself. It should be
Code:
fastboot flash recovery recovery.img
I'm not 100% sure it will work without problems, but if it did, your data will not be wiped.
I suggest you wait for someone else to answer coz I'm not expert. I only learned from guides in the telegram group.
Chenes said:
From what I read before, fastboot boot will only boot to that recovery file temporarily but I haven't tried it myself. It should be
Code:
fastboot flash recovery recovery.img
I'm not 100% sure it will work without problems, but if it did, you're data will not be wiped.
I suggest you wait for someone else to answer coz I'm not expert. I only learned from guides in the telegram group.
Click to expand...
Click to collapse
Can I have that Telegram group invite?
iOussamato_ said:
Can I have that Telegram group invite?
Click to expand...
Click to collapse
Realme 7 • Narzo 20 Pro • Global
Welcome To Realme 7 | Narzo 20 Pro Group • RM6785_updates(official-A12/A13)- @RM6785 / https://t.me/realme7updater • RM6785_Gaming- @RM6785Gaming • Realme 7 Cloud: @realme_7_cloud
t.me
iOussamato_ said:
You sure? I'm on RMUI2.0 and how do I flash it? Can I type 'fastboot boot recovery.img'? Are my data will be wiped?
Sorry for a lot of questions, haha
Click to expand...
Click to collapse
You can try, first, if fastboot works in your device, type adb reboot fastboot, once the script ends, quickly disconnect device from your PC and again reconnect it, you will be redirected to fastboot, if the bootloader is unlocked, you could flash it using fastboot commands.
If you can´t get it to work then you can flash it using SPFT https://spflashtool.com/, put the recovery, in the same folder, with the attached files. All the sources to can use the tool, here https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
SubwayChamp said:
You can try, first, if fastboot works in your device, type adb reboot fastboot, once the script ends, quickly disconnect device from your PC and again reconnect it, you will be redirected to fastboot, if the bootloader is unlocked, you could flash it using fastboot commands.
If you can´t get it to work then you can flash it using SPFT https://spflashtool.com/, put the recovery, in the same folder, with the attached files. All the sources to can use the tool, here https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
Click to expand...
Click to collapse
I have never used SPFlashTool before honestly, I'm just scared to break my phone or lost my data in it. I just wish to install a custom ROM
iOussamato_ said:
I have never used SPFlashTool before honestly, I'm just scared to break my phone or lost my data in it. I just wish to install a custom ROM
Click to expand...
Click to collapse
Most of the custom roms I've seen requires formatting data. Just to be sure have you unlocked bootloader already? That requires wiping data iirc.
If not then nothing will really work with what you're doing.
iOussamato_ said:
I have never used SPFlashTool before honestly, I'm just scared to break my phone or lost my data in it. I just wish to install a custom ROM
Click to expand...
Click to collapse
What you are saying now is totally different from what you firstly posted.
Installing a custom ROM doesn't require a stock recovery (just in case you are confusing), and obviously, to can switch from a stock ROM to a custom ROM, that has a total different basement, it's mandatory to format data, anyway, you should back up your data previously to do so.
SubwayChamp said:
What you are saying now is totally different from what you firstly posted.
Installing a custom ROM doesn't require a stock recovery (just in case you are confusing), and obviously, to can switch from a stock ROM to a custom ROM, that has a total different basement, it's mandatory to format data, anyway, you should back up your data previously to do so.
Click to expand...
Click to collapse
I meant, I wish to install a custom ROM but I cannot install a working recovery and wanted the stock one. Sorry
Chenes said:
Most of the custom roms I've seen requires formatting data. Just to be sure have you unlocked bootloader already? That requires wiping data iirc.
If not then nothing will really work with what you're doing.
Click to expand...
Click to collapse
Yes my bootloader is already unlocked
iOussamato_ said:
Yes my bootloader is already unlocked
Click to expand...
Click to collapse
Then you can root your phone 1st then backup your files to a computer and use migrate backup to backup app data. Note that migrate backup is limited to 4gb. Then do the fastboot flash i mentioned before
iOussamato_ said:
I meant, I wish to install a custom ROM but I cannot install a working recovery and wanted the stock one. Sorry
Click to expand...
Click to collapse
Why you are saying that you cannot install a working recovery, I don't know of any attempt you did to achieve it.
A stock recovery is not needed to install a custom ROM, and even you can't install a custom ROM using a stock recovery.
If you want to join, flashing your device and stuff like this, better learn how to use SPFT, also you have this tool https://github.com/bkerler/mtkclient, this can save your device, if something in the process goes wrong.
SubwayChamp said:
Why you are saying that you cannot install a working recovery, I don't know of any attempt you did to achieve it.
A stock recovery is not needed to install a custom ROM, and even you can't install a custom ROM using a stock recovery.
If you want to join, flashing your device and stuff like this, better learn how to use SPFT, also you have this tool https://github.com/bkerler/mtkclient, this can save your device, if something in the process goes wrong.
Click to expand...
Click to collapse
I wanted to flash stock rom to downgrade into Realme UI 1.0 then flash the custom recovery so I can flash a custom rom
iOussamato_ said:
I wanted to flash stock rom to downgrade into Realme UI 1.0 then flash the custom recovery so I can flash a custom rom
Click to expand...
Click to collapse
OK, then what you are trying to install is an "old" Android 10 based ROM, if this is the case, then just download a stock Android 10 ROM, flash it through SPFT, then use SPFT to flash the custom recovery, transfer the custom ROM to your external SD Card (preferably) or sideload it, through recovery, and flash it. In the process you need to unlock bootloader, and immediately to flash the custom recovery, boot to it, using hardware buttons.
SubwayChamp said:
OK, then what you are trying to install is an "old" Android 10 based ROM, if this is the case, then just download a stock Android 10 ROM, flash it through SPFT, then use SPFT to flash the custom recovery, transfer the custom ROM to your external SD Card (preferably) or sideload it, through recovery, and flash it. In the process you need to unlock bootloader, and immediately to flash the custom recovery, boot to it, using hardware buttons.
Click to expand...
Click to collapse
Do you know a tutorial of how to use SPFlashTool?
iOussamato_ said:
Do you know a tutorial of how to use SPFlashTool?
Click to expand...
Click to collapse
How to use SP Flash Tool
This is a step-by-step tutorial on how to flash stock rom to a Mediatek device using Smart Phone Flash tool. SP Flash tool is one application you could find very useful in fixing extreme cases of a br
www.hovatek.com
Alright so, it might sound funny but I think I fixed it. I was playing with my downloaded recoveries until I downloaded the stock recovery, it is compatible but when I do fastboot reboot recovery I get stuck at Orange State for like 30min and it boots me into the recovery so does anyone know a solution for this? And thank you for everything and sorry for wasting y'all's time. Sincereley.
iOussamato_ said:
Alright so, it might sound funny but I think I fixed it. I was playing with my downloaded recoveries until I downloaded the stock recovery, it is compatible but when I do fastboot reboot recovery I get stuck at Orange State for like 30min and it boots me into the recovery so does anyone know a solution for this? And thank you for everything and sorry for wasting y'all's time. Sincereley.
Click to expand...
Click to collapse
You have to boot to recovery using hardware buttons (PWR + vol. down), in regard to orange state, this is absolutely normal when bootloader was unlocked, it's not an issue but a cosmetic thing.