Hi all,
Hoping someone might have some knowledge on this Chinese cheap build tablet.
Its an iRulu eXpro X1, model X10. Inside is the Allwinner A83T with 16Gb Rom and 1 Gb RAM.
This was previously with my daughter but we just upgraded her to a Sumsung Tab A, so I thought I'd play with the iRulu (bad mistake lol).
The iRulu was still running kitkat so I rooted it (Kingo Root works fine in anyone else is trying), attempted to install CWM and TWRP. Both failed, every attempt through adb / fastboot gave bootloader: secure mode fail error.
So I them decided to flash the new rom from iRulu's website - using PhoenixUSB.
All was going well, the tablet went into download mode (hold Esc button, plug USB cable in and press power button 10 times in rapid succession.) and the firmware started to download. At 80% PhoneixUSB threw a boot(0) error and stopped.
After this the tablet will not start (nothing on display) nor even show the charging icon on the screen! It does however still enter the download mode so I can try other images. So far I have tried 5 different images (including darkglow10.1_android5.1.img, A83T_N102_N1021L1BC_20151123.img) however all of then error when writing to the bootloader. I have also tried PhoenixCard to write an image in Startup mode - this gave nothing Live Suite makes no difference either, using the images I have.
Unfortunately the serial number has worn off the device so I cant be sure of the exact firmware from iRulu website to install. (I've mailed them for what its worth).
I have opened the device and the pcb is marked INET-N102-REV01 and Zeng-gc2014-12-22. Google has some stuff on it but nothing I understood
Does anyone have any thoughts? I'm concerned that the bootloader is locked / corrupt in some fashion which is stopping the download.
thanks
update: using the x1081 firmware from iRulu and PhoneixCard I have restore functionality. The device thinks its an expro x2 plus and it doesnt recognise the SD card slot (tried multiple cards) but other than that it seems okay
Will try to figure the correct firmware thou - anyone?
thanks
Having the same issue
Hello, I am having the same problems with that tablet, got it from this girl I'm seeing. It was freezing whenever it connected to the internet, I assume was a ROM issue, i flashed an incorrect recovery on it after getting frustrated. Can you please help?
Related
I have a Trio Stealth Pro 9.7" Tablet by Mach Speed that came with ICS. It wasn't able to run much of anything so I tried to upgrade and needless to say it didn't work.
First, I installed CWM. I did this because the device appeared to have no recovery mode I could find. That seemed to work at first but then I discovered I could ONLY boot into CWM.
SO, I tried to use Live Suit to flash an img of 4.1.1 (I know, a stock file from the manufacturer would have been best but please don't tell me to download one unless you have a working link - I've tried without success).
When that failed, I figured I'd try something else except now I only get a blank screen - not even an initial logo. The only way I can tell if the thing is on or off is by plugging it into my computer, pressing the power button and listening for a usb connect or disconnect noise. (My computer currently recognizes it as USB Device(VID_1f3a_PID_efe8) although it originally recognized it as a Trio something or other).
Any help would be fantastic. Thanks in advance.
http://forum.xda-developers.com/showthread.php?t=2296921
Please read carefully. You must check first whether you have 9.7 or 9.7C before flashing!!!!
Check this if your tab has the Allwinner a10 chip. This worked great for my A10.
http://forum.xda-developers.com/showthread.php?t=1821398
More Questions
Neptune23 said:
http://forum.xda-developers.com/showthread.php?t=2296921
Please read carefully. You must check first whether you have 9.7 or 9.7C before flashing!!!!
Check this if your tab has the Allwinner a10 chip. This worked great for my A10.
http://forum.xda-developers.com/showthread.php?t=1821398
Click to expand...
Click to collapse
I appreciate the reply but I don't know how to flash a zip without the use of my tablet screen. I can use Live Suit but that only seems to flash .img files.
Also, I'm not sure how to tell if I have the 9.7 or 9.7c
At first guys, excuse me if the topic isnt at right place but i cant find the right section.
So i have a Prestigio Multipad 8.0 HD (PMP5588C).I think i have bricked it.I erased NAND with Amlogic Image Burning Tool and now the device wont boot.The screen is black even when im charging it.I wont boot at all.I tried to boot in recovery but no succsess.Ive tried to boot it normally and in recovery (even when i charged it 10 hours usually it charges for 4 hours) but the screen is black.When i connect it with Power and Vol- buttons it shows up in the device manager as M6-CHIP and ive installed the drivers so now is World Cup Device.Ive tried to use Amlogic Image Burning Tool again but it fails on load spl.Any ideas?
Thanks in advance!
Best regards, Stoio.
Im sorry for my English but im from Bulgaria.
Unbrick amlogic tablets
Hello stoio
I have almost the same Tablet. It's a Prestigio PMP5580C, for me it is labeld as Intenso Tab 814, but they are completely the same. I have tried to find the u-boot.bin in the stock firmware, but I didn't sucess yet. I've downloaded several tools which allows me to make my 16 GB MicroSD card recognized as a 512 MB SD card, there I have to put the files on it to unbrick my tablet, it's amlogic (like my username) (someone told me that this is the chipset). It has a TOSHIBA TC58TEG6DCJTA00 NAND flash chip of 8 GB capazity. I also need help by getting my tablet unbricked.
In the future Inwant to learn with this amlogic based tablet how to create custom ROM's, recoveries and custom boot splash screens.
Thanks for any help, I reall appreciate your help,
Please note that I'm from Germany and my English is not good as it should used to be, but I have a dictionary (as a normal book) where I can get good communication with you. I like the idea of using english only.
Every Image (.img) were made with the dd command, I need to look inside in the images and open the content, I used a hex editor and tried to strip off the 2k of data, but I can't success. I'm using this tutorial:
I'm using this hex editor under linux: Okteta
I don't know how to delete the 2k of data. I need to know what content the partitions have to unbrick my amlogic based tablet, cause I'm seeing still the white android robot, and the charging battery or charged plugin picture, but this tablet doesn't have a bootloader or recovery so I'm out of ideas, the only way for me is to use a microsd card like an live cd to automatically let this tablet flash stock firmware, but where is it? Please help me out, I meight be wrong, it's possible that different repairing ways exist, too.
Hi,
I've recently bought a second-hand polaroid mid1047pme01.112 tablet and the previous owner has made a big mess with its software. I'm trying to bring it back to life but I can't find a way.
Actually it can power up and show an image with Polaroid written on it and it won't do anything else. I can't access the recovery mode so I don't know what I can do to install a working CWM (I think I already found a working copy of it, but I don't know how to install).
If the tablet is connected to a PC it doesn't react (the PC doesn't show nothing, even the driver installation procedure).
May you know which are the steps I should follow?
Hello. I'll try to explain my problem because I really need some help.
A few days ago, I was normally using my Tablet ECS TR10RS1 Intel®.... I turned it off, went to sleep and the next day when I was going to use it again, the OS didn't start, so I tried and tried until I found a forum where they led me to restore a backup file because the original firmware/rom wasn't still available.... publicly. I tried that, but in the process, I accessed the EFI Shell... That wasn't trouble at all, I just plugged the keyboard and typed "exit", and then it let me to the BIOS... And that's when my real problem began: I restored the factory setting default... and it involves "disabling USB ports".... Now, AGAIN, I'm stuck on EFI Shell. But this time, I can not type "exit" since the keyboard is not recognized by the Tablet.
Then I pressed Vol UP + Power ON and I get access to another menu "DNX".... And that's what brings me here to your forum:
I was briefly reading that one of your members managed to flash the BIOS via DNX, so I was wondering if you guys could help me do that to my tablet because I'm not planning to have a really expensive paper holder.
Thanks in advance.
Jinky.
Not sure about your case. But as your tablet use clovertrail chip like my zenfone 5 n fonepad7 170CG, then there's some methods to unbrick like via fastboot, flashtool, or intel factory flash tool... all of above are required a valid firmware, at least a IFWI package then intel FFT can unbrick anyway. So try to find your need, as i tried to help u to find it, but most of webpages use spanish, then i didn't understand anything
Sent from my ASUS_Z00AD using Tapatalk
Hi folks, I'm hoping someone can help me unbrick my MXQ Pro 4k. I've searched high and low for the stock firmware but it is nowhere to be found. My box seems to be a peculiar variant and the specs are as follow:
S905x 1GB/8GB S905XQ_V2.0 2017.05.16
SV6051P Wifi
SK Hynix H27UCG812ETR DDR3
It became bricked when I tried to flash different atvXperience firmware img files with the Amlogic USB burn tool. I had successfully flashed it with a version posted by minixfreak on the freaktab forums.
Although not with exactly the same specs, it worked pretty well except for the remote control wouldn't function. So I tried to flash again with what I thought was the stock firmware but unfortunately, that bricked the box pretty good. I tried to revert to the atvXperience firmware that worked from the post, but it now always fails at 7% when trying to format with USB tool. In all cases, I've tried every possible combination of pushing in the reset button in the AV port, shorting the NAND pins, switching the order of USB ports... The box always has a red light when powered and is always recognized by the USB Burn Tool driver when connected to the OTG port on the box but always stops at 7% when it attempts to format.
I hooked up a serial usb/ttl cable to capture boot output, turned on the box and it seems the box is in an infinite loop with the following output:
LOOP:8F;EMMC:800;NAND:85;SD:800;USB:8;LOOP:90;EMMC :800;NAND:85;SD:800;USB:8. It appears the bootloader is corrupt or maybe has been erased.
I tried making a bootable sd card using both burncard maker and bootcard maker but that didn't work either as it can't get past intial boot attempt, even pressing reset or shorting nand pins. I'm not sure if it's because of the boot loop or perhaps incorrect firmware. I haven't been able to find the definitive stock firmware anywhere. I would appreciate help in finding this elusive firmware.
I've scoured the internet for a solution and tried many different things but nothing can get me out of this loop. I'm now at a dead end.
I once had a bricked router that I was able to fix by connecting usb/ttl and putty and repeatedly hitting Ctrl-C after rebooting to get a CFE prompt. At that point I was able to manually flash the router with firmware and revive it. Maybe there's a tool available that would possibly do something like that with the android box?
Also possible I guess that something in the hardware is toast and it's just a paper weight now. Anyway, any help and suggestions would be appreciated.