I have huge problem with my SM-T813. The FRP lock is on; after it receives automatic Samsung software update it cannot boot. It stuck on "Samsung Galaxy Tab S2 Powered by Android" and then it turns off. It cannot go to Recovery Booting (to go back factory reset) ... well after "Recovery Booting" appears, "Installing system update" appears for 20 seconds then it turns off. It can go to Download Mode, however when I try to flash the Stock ROM (.tar or .tar.md5 files downloaded from Sammobile) with Odin, well I have tried many many times the result is always failure. Written in red: "SECURE CHECK FAIL: recovery. Blocked by FRP Lock." I tried to flash the hidden.img.tar with Odin3, on Odin3 "PASS" but in reality my SM-T813 is still facing the exact same problem after this flashing. What should I do, please help. Than you very much.
dama0002 said:
I have huge problem with my SM-T813. The FRP lock is on; after it receives automatic Samsung software update it cannot boot. It stuck on "Samsung Galaxy Tab S2 Powered by Android" and then it turns off. It cannot go to Recovery Booting (to go back factory reset) ... well after "Recovery Booting" appears, "Installing system update" appears for 20 seconds then it turns off. It can go to Download Mode, however when I try to flash the Stock ROM (.tar or .tar.md5 files downloaded from Sammobile) with Odin, well I have tried many many times the result is always failure. Written in red: "SECURE CHECK FAIL: recovery. Blocked by FRP Lock." I tried to flash the hidden.img.tar with Odin3, on Odin3 "PASS" but in reality my SM-T813 is still facing the exact same problem after this flashing. What should I do, please help. Than you very much.
Click to expand...
Click to collapse
Try to obtain your device pit file
And then reparation your device through Odin and fish back your stock rom
Not that easy, mate. I had tried it 10 times and always failed. The FRP lock blocks it and almost everything else.
dama0002 said:
I have huge problem with my SM-T813. The FRP lock is on; after it receives automatic Samsung software update it cannot boot. It stuck on "Samsung Galaxy Tab S2 Powered by Android" and then it turns off. It cannot go to Recovery Booting (to go back factory reset) ... well after "Recovery Booting" appears, "Installing system update" appears for 20 seconds then it turns off. It can go to Download Mode, however when I try to flash the Stock ROM (.tar or .tar.md5 files downloaded from Sammobile) with Odin, well I have tried many many times the result is always failure. Written in red: "SECURE CHECK FAIL: recovery. Blocked by FRP Lock." I tried to flash the hidden.img.tar with Odin3, on Odin3 "PASS" but in reality my SM-T813 is still facing the exact same problem after this flashing. What should I do, please help. Than you very much.
Click to expand...
Click to collapse
Try to boot to download mode
and flash your stock rom via samsung odin
Related
I was in the process of rooting my phone with Odin and using Clockwork Mod Recovery Odin flashable .tar file when I accidentally unplugged it while it was in the process of starting. Now I'm stuck on a screen where it says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
In the corner of the phone it reads
ODIN MODE
PRODUCT NAME: SGH-I717
CUSTOM BINARY DOWNLOAD: YES(1 COUNTS)
CURRENT BINARY: CUSTOM
I need answers.... Would appreciate it
Download kies and while on that screen go to tools-firmware upgrade and installation that should get you back to stock
Did that, it downloaded then proceeded with the update and never went through. Let it sit for about 30 minutes, it never even hit 1%. I re did them steps tried to initialize it once more and all it does it download firmware then go away. Is it possible the phone is bricked?
If you can get into that screen its probably a soft brick, does odin recognize the device in in that weird download mode?
http://forum.xda-developers.com/showthread.php?t=1863995
Read this .....
It describes your issue I think ....g
All of a sudden when i booted up my galaxy s3 it said that there was no /system and didn't boot up. So I went to recovery and made a factory reset, still nothing. After that I tried to flash stock firmware via odin, but when it was finishing it said It had failed. Now a white screen appears when I turn it on and It can't boot up. I tried flashing it again but it says there's no PIT file. But it enters download mode. Here are some photos:
oi58.tinypic . com/kec4yf.jpg (separated (dot)com because i'm new)
oi59.tinypic . com/2zp0a5t.jpg
Thank You.
So basically, im a noob. i tried flashing stock lollipop on my galaxy s4 from CyanogenMod with odin, but it says not responding everytime pda is clicked. Now, when i try to boot up the phone with recovery mode (vol up home button and lock) it says "Recovery Booting" in the corner and vibrates twice. Then it tries to boot normally but of course fails with the cyanogenmod splash screen eternally spinning. PLZ HELP i have no other phone
Try a different PC and/or version of Odin. Sometimes Odin does that for a couple minutes and then will finish checking the md5 and work fine afterwards. Can be finicky on some computers.
pavee2000 said:
So basically, im a noob. i tried flashing stock lollipop on my galaxy s4 from CyanogenMod with odin, but it says not responding everytime pda is clicked. Now, when i try to boot up the phone with recovery mode (vol up home button and lock) it says "Recovery Booting" in the corner and vibrates twice. Then it tries to boot normally but of course fails with the cyanogenmod splash screen eternally spinning. PLZ HELP i have no other phone
Click to expand...
Click to collapse
your device is on a bootloop. you can overcome it by flashing last working official firmware of your device.
& for the lollipop update,
Check whether the update of lollipop is in .tar,md5 format then only you can flash it via odin through PDA option. You can even try Odin_v3.09 & select the AP option or simply follow any guide how to use Odin_v3.09
If the update is in .zip format then install a custom recovery to your device and flash it.
Lastly you can restore your phone by flashing official firmware that previously worked on your phone and then try flashing lollipop update with a fresh start.
Let me know for any other assistance
So, I had an old S4, decided using it, worked for a couple weeks, then it just wouldn't turn on.
I'm far from being an expert, I did some research and I understand that its "soft bricked" (not hard bricked, phew!)
It starts, you see the "Samsung Galaxy S4 i9500" screen, and then just turns off.
If I try the recovery boot menu, it wont work, it'll just have the "Downloading, dont turn off target" screen, without the Odin mode, and if I try the download boot, it'll go into the odin mode, which is fine and it's supposed to happen, right?
The thing is when I go to Odin, and try to install the stock firmware, I've tried with and without a PIT file, I've tried with three different USB cords, on two different computers, with three different versions of Odin and with and without the WinXP compatibility mode ON and OFF. I've checked and unchecked the "auto reboot" and "f reset time" boxes, and I've never touched the other boxes (like nand and flash and led)
Odin will always recognize my phone, which is awesome, I always see the message "Added!"
Once I run Odin, which by the way is a picky a** motherf****, it'll stay stuck always here
""There is no PIT partition""
And also it has gotten stuck here
"Complete(Write) operation failed."
"Get pit for mapping (this was the most frequent one until I just always got the first one)"
"SetupConnection.."
This is getting extremely annoying.
I am almost positive I have the correct stock firmware, I got it from the samsung-updates.com website I downloaded the 5.0.1 version, I am curently downloading the 4.4.2 version, just to see what happens.
I do not know what the hell is a PIT file, I am using an "adonis" whatever that I found on some forum.
I also tried to "install" the recovery menu, with a "Philz Touch" TAR MD5 file I found, but I have no idea what that is (also, it didn't work)
Just to double check with you, its a Samsung Galaxy S4 i9500, I do not know which version of android was running, also, i do not know if USB debugging is on or off.
PLEASE HELP!
Product Name: GT-i9500
Current Binary: Samsung Official
System Status: Official
Knox Warranty Void: 0
AP SWREV: A3
I looked at the 5 threads that were suggested as soon as I typed in the subject. Cool feature!!!
So my wife's S3 Tab is stuck in a bootloop. I tried wiping cache and factory reset. Didn't work. I have not enabled developer mode and I can't now as it is stuck in a bootloop (duh me!).
I tried to flash stock firmware using Odin 3.14 and I got a fail.
Now the tab is flashing this message. Blue screen and white text.
"An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software"
How can I fix this? Please help!
zolog said:
I looked at the 5 threads that were suggested as soon as I typed in the subject. Cool feature!!!
So my wife's S3 Tab is stuck in a bootloop. I tried wiping cache and factory reset. Didn't work. I have not enabled developer mode and I can't now as it is stuck in a bootloop (duh me!).
I tried to flash stock firmware using Odin 3.14 and I got a fail.
Now the tab is flashing this message. Blue screen and white text.
"An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software"
How can I fix this? Please help!
Click to expand...
Click to collapse
Hello. As far as I know, if you do not have OEM Unlocking enabled, you cannot flash anything through ODIN.
However, you should be able to flash stuff in the green screen you are in.
Download the *proper* stock firmware from sammobile.
By proper, I mean, if your tab has no sim then download for T820
and if it does Download for T825. Then download with the proper CSC code. (it is basically the region you bought the tab from. Look it up).
Download and flash with ODIN 3.14. You can flash stock roms from the Error screen you're in. Also be sure that you're flashing everything properly and have the proper drivers by following everything here: https://android.gadgethacks.com/how-to/use-odin-flash-samsung-galaxy-stock-firmware-0182037/
press the thanks button on the bottom right of my post if i helped. Means a lot