Best Kernel Auditor Settings for MIDO? - Xiaomi Redmi Note 4 Questions & Answers

What is the best settings in Kernel Auditor for battery life?, im using the latest RR

Same here.

CPU / GPU frequencies on minimum with powersaving CPU governor, there u go best battery life.

Related

I9100G and SetCPU

I have been testing different SetCPU settings on my I9100G and been running AnTuTu Benchmark. Here are the results:
hotplug - 6153
ondemand - 3739
conservative - 3830
performance - 4066
SetCPU not installed - 4964
Does that even make any sense? Shouldn't I have the best performance with the performance setting?
Not surely.... This may be different for any situation... It depends on the kernel, voltages and so on... I thinks that it's normal!
Sent from my Galaxy SII powered by CheckRom
Would anyone know what are the default kernel settings?
It's strange because when I disable SetCPU I am getting a worse performance again, but from what I can see in system files, the SetCPU settings are still here.
EDIT:
Actually some more tests:
hotplug - 6036
conservative - 5834
ondemand - 5740
performance - 5058
I might have forgot to tick the "Enable" thing in SetCPU with some of the first tests :/
_AnAkIn_ said:
Would anyone know what are the default kernel settings?
It's strange because when I disable SetCPU I am getting a worse performance again, but from what I can see in system files, the SetCPU settings are still here.
EDIT:
Actually some more tests:
hotplug - 6036
conservative - 5834
ondemand - 5740
performance - 5058
I might have forgot to tick the "Enable" thing in SetCPU with some of the first tests :/
Click to expand...
Click to collapse
Wich rom/kernel are you runing?
_AnAkIn_ said:
I have been testing different SetCPU settings on my I9100G and been running AnTuTu Benchmark. Here are the results:
hotplug - 6153
ondemand - 3739
conservative - 3830
performance - 4066
SetCPU not installed - 4964
Does that even make any sense? Shouldn't I have the best performance with the performance setting?
Click to expand...
Click to collapse
And what values you get on glbenchmark?

Best settings for NOS Nougat with Agni?

Hey!
First time using agni kernel on Nougat NOS rom, can someone please tell me best settings for balance performance? Like no lag, smooth but good battery backup?
Never used this kernel, only radon and still lag sometimes with balanced settings.
Thanks! Appreciate all info!
According to Agni dev, kernel will improve with time, I am also using Nitrogen with Agni, and I also experienced lags on first day. Wait for a full day of use, and don't turn your device off. It should improve.
icnn said:
Hey!
First time using agni kernel on Nougat NOS rom, can someone please tell me best settings for balance performance? Like no lag, smooth but good battery backup?
Never used this kernel, only radon and still lag sometimes with balanced settings.
Thanks! Appreciate all info!
Click to expand...
Click to collapse
Use this settings:
In Agni control all cpu Freq. To lowest ( MINIMUM and MAXIMUM both do it low Freq)
Big governer interactive glassfish, small governer interactive glassfish.
Hotplug - intelliplug
GPU Freq. To lowest in Agni control.
Lz4 zram off for 3gb ram and If 2gb ram variant then Lz4 zram 256 set.
Adreno idler on
In spectrum app, set profile to battery.
Last one can be ignored outdoor since it dims brightness.
Then save your current setting. and Reboot.
If it lags for you in beginning don't worry.
It will adapt your usage and it will be smooth the more you use.
Try this :-
Governor big cluster- Interactive glassfish
Governor small cluster- Interactive glassfish
CPU Max freq big cluster - 1612
CPU Max freq little cluster- 1382
CPU Min freq big cluster- default
CPU Min freq little cluster- default.
CPU hotplugging - Intelliplug
GPU Max freq- 550
GPU Min freq- 133
Adreno Idler - On
Z4 RAM - 500 mb
Rest all default.

Anyway to get battery tweaks without resorting to custom kernels?

I would love to get the battery life profiles from the custom kernels but I don't want to install them and would like to relay to the stock kernel of my rom which is RR. For reasons that I want to avoid bugs and would want to stay updated all the time.
I found spectrum which exactly what will solve my problem but the problem is that it doesn't support the stock kernel of RR.
Stock kernel of RR support "Kernel Adiutor". Kernel Adiutor give you various useful settings.
In my opinion the first is change voltage of your CPU (for each speed).
i Undervolt all Little cores:
(Warning each cpu need different settings, this setting can not work for you)
400 and 691 mhz with 695mv
806mhz 745mv
1017mhz 825mv
1190mhz 880mv
1305mhz 915mv
1382mhz 935mv
1401mhz 940mv
1440mhz 950mv
Big cores DISABLED. (i dont have lags with this settings... i play Clash Royale and use social apps, if you need it enable)
In GPU (i dont play games except Clash Royale)
133mhz min
432mhz max
Down differential 75
Iddle wait 7
Workload 10
For test speed/voltage you need to set same min and max speed and disable de Big Cores. (Or set max speed "X"mhz and use performance governor)
low voltage
use Antutu for test or other similar app.
if work low voltage again
test
if work repeat if not raise the voltage 5 or 10 mv and test again.
DONT USE "APPLY ON BOOT" when you try different voltages.
when you have your profile save this and here in profile menu you can set it at startup (you need to be sure of your phone stability with this settings).
Equally i recommend Agni kernel 13... i use before RR oreo and now AEX oreo and im happy with this kernel, zero problems, all fine.
in this forum other users try with VULMAX but i prefer my settings in manual and not with profile (i dont know the changes in each profile). https://forum.xda-developers.com/redmi-note-3/themes/xgh-t3701825
You can enable ForceDoze with patch https://forum.xda-developers.com/redmi-note-3/themes/universalforcedoze-deepsleep-googledns-t3770350
With ForceDoze you may have problems with sync of message apps or with clock update (you can fix it in your battery settings> optimized apps)
How often does AGNI gets updated?
drckml said:
How often does AGNI gets updated?
Click to expand...
Click to collapse
i dont know but is really good for me.
Equally if you like stock kernels may use RR stock kernel + Kernel Adiutor without problems.
link of agni kernel: https://forum.xda-developers.com/re...nel-24-09-2016-agni-puremiui-mm-v1-4-t3468042
last update 2018-06-28
I tried Vulmax and the battery config and it made my phone really fast, literally as in the animations of closing and opening of apps became way too fast. I think Kernel Auditor would be better for me.
drckml said:
I tried Vulmax and the battery config and it made my phone really fast, literally as in the animations of closing and opening of apps became way too fast. I think Kernel Auditor would be better for me.
Click to expand...
Click to collapse
you can change animation speed from the developer options in the settings.. disabling animation saves a bit battery thats y it is disabled

Max performance in kernel auditor set back to default at 1.5ghz after few minutes ?

I am Using honor 8 frd L02 emui 5.0.1....
And device is Rooted ...
I want the maximum possible frequency while gaming...and maximum allowed is 2.3ghz ... Kernel auditor works fine in setting up maximum performance at 2.3ghz(on demand as well as performance)... But after few minutes frequency sets to 1.8ghz or 1.5ghz... It maybe due to emui... But I don't want to switch to custom ROM as there are problems like camera or calling....
So what is the solution to overclocking the CPU....
I am thinking about using open kernel tweaks like AKT(advance kernel tweaks), or LKT(legendary kernel tweaks)... Will it solve my problem... Or is there any other solution ???

[Q] What is Schedutil governor and how it works?

So I've been hearing Schedutil is the most balanced governor for Android phones cause it can handle battery and performance well.I searched it on internet and found some article about it that my brain can't understand.
Why is it better and how it works? Can anybody explain it to me or provide me some link where I can read about it?
Thank You
It's a CPU governor. Look inside here. This governor requires Linux kernel 4.7+.
I got problem with schedutil on oneplus 9, its the default governor and get low fps while gaming. Maybe is a bug with "games" app what should change to a better governor while gaming... it also have a "performance" option
This governor is quiet ****. Its like ondemand ramping up to max clock when not needed.

Categories

Resources