hello
i tried to install twrp but the swipe didn't work
so i tried to install an older version
but now when i reboot twrp do not appear
and i have no more than 800mo memory available
i can't hard reset
what can i do ?
noogpout said:
hello
i tried to install twrp but the swipe didn't work
so i tried to install an older version
but now when i reboot twrp do not appear
and i have no more than 800mo memory available
i can't hard reset
what can i do ?
Click to expand...
Click to collapse
Flash recovery from CMD !
AbhaYsinGH007 said:
Flash recovery from CMD !
Click to expand...
Click to collapse
how can i flash recovery from cmd ?
where can i download the file ?
noogpout said:
how can i flash recovery from cmd ?
where can i download the file ?
Click to expand...
Click to collapse
Xiaomi.eu -> https://xiaomi.eu/community/threads/twrp-for-mi-pad-3.39743/
i follow the thread you mention
i can launch twrp but swipe do not work, i have now an otg cable but mouse is not recognized
so i don't know how to flash the rom
noogpout said:
i follow the thread you mention
i can launch twrp but swipe do not work, i have now an otg cable but mouse is not recognized
so i don't know how to flash the rom
Click to expand...
Click to collapse
That could be a bug !
noogpout said:
i follow the thread you mention
i can launch twrp but swipe do not work, i have now an otg cable but mouse is not recognized
so i don't know how to flash the rom
Click to expand...
Click to collapse
I find that hard to believe. Did you follow post #10? At your own risk, of course.
Guys, I did it!
I had no problems with the touchscreen, so there was nothing to solve for me. My Bootloader was also unlocked already.
Here is everything I did (be careful, this deletes all your data!):
Boot into fastboot (Volume down+ Power on, hold the Volume down-Key until fastboot loads)
Code:
fastboot -w
fastboot erase system
fastboot format system
fastboot flash recovery twrp.img
Boot into TWRP (Volume up + Power on, hold the Volume up-Key until TWRP boots)
WIPE -> Data -> Repair or Change File System -> Resize File System
Flash xiaomi.eu-zip normally (hopefully) enjoy!
Click to expand...
Click to collapse
Read the entire thread
yes i read the entire thread, i executed all the flashboot command but my rom was a global one not chinese, so the touch screen does not work in twrp.
Actually i downloaded a rom here : https://drive.google.com/uc?id=0B023gSzruW0aLV9ZRG1pdHpqd3c&export=download
then in fast boot mode i executed this command : ./flash_all.sh
but at the end i have this error : finished. total time: 10.194s
error: cannot load './images/cust.img'
i cannot boot to miui but now i have MI Recovery instead of TWRP
noogpout said:
yes i read the entire thread, i executed all the flashboot command but my rom was a global one not chinese, so the touch screen does not work in twrp.
Actually i downloaded a rom here : https://drive.google.com/uc?id=0B023gSzruW0aLV9ZRG1pdHpqd3c&export=download
then in fast boot mode i executed this command : ./flash_all.sh
but at the end i have this error : finished. total time: 10.194s
error: cannot load './images/cust.img'
i cannot boot to miui but now i have MI Recovery instead of TWRP
Click to expand...
Click to collapse
Why would you execute "./flash_all.sh". Did you try the methods mentioned on page 2 in the thread?
You need to know your commands.
Do you have ADB drivers installed?
Palm Trees said:
Why would you execute "./flash_all.sh". Did you try the methods mentioned on page 2 in the thread?
You need to know your commands.
Do you have ADB drivers installed?
Click to expand...
Click to collapse
yes i know the command : ./flash_all is a script in the archive : cappu_images_7.5.11_20170514.0000.00_7.0_global_xiaomi.eu.zip
i have already tested the commands in the page 2 :
fastboot -w
fastboot erase system
fastboot format system
fastboot flash recovery twrp.img
twrp is ok but i cannot swipe, because the touch screen is not enabled
so i cannot pass the step :
10. WIPE -> Data -> Repair or Change File System -> Resize File System
it's ok i commented the following lines in the script :
fastboot $* flash cust `dirname $0`/images/cust.img
if [ $? -ne 0 ] ; then echo "Flash cust error"; exit 1; fi
so the script can continue and after the boot is ok, MIUI start
Related
I was trying to install TWRP on my NX529J.
"Adb reboot bootloader command" is working but when i try to install TWRP with command "Fastboot flash recovery recovery.img", it dosent work.
It shows "waiting for devices"
Tried " fastboot devices" NO device there
I tried updating all drivers installed fastboot drivers and zte drivers but still no device found.
In developer settings OEM unlock, USB debugging is on.
and adb mode is also on with *#7678#.
Plz Help.
teji007 said:
I was trying to install TWRP on my NX529J.
"Adb reboot bootloader command" is working but when i try to install TWRP with command "Fastboot flash recovery recovery.img", it dosent work.
It shows "waiting for devices"
Tried " fastboot devices" NO device there
I tried updating all drivers installed fastboot drivers and zte drivers but still no device found.
In developer settings OEM unlock, USB debugging is on.
and adb mode is also on with *#7678#.
Plz Help.
Click to expand...
Click to collapse
sudo fastboot -i 0x19d2 boot recovery.img
sudo command not recognized in windows
anish.mvj said:
sudo fastboot -i 0x19d2 boot recovery.img
Click to expand...
Click to collapse
Sir.
i tried this command also but windows didnt recognized sudo command.
Plz any other way?
teji007 said:
Sir.
i tried this command also but windows didnt recognized sudo command.
Plz any other way?
Click to expand...
Click to collapse
That is ubuntu command.
For windows run CMD as administrator and then run
fastboot -i 0x19d2 boot recovery.img
Thanks and a little more help
anish.mvj said:
That is ubuntu command.
For windows run CMD as administrator and then run
fastboot -i 0x19d2 boot recovery.img
Click to expand...
Click to collapse
Thank you very much
Sir i upgraded my nx529j to 6.0.1, is there anyway to root it or downgrade to 5.1.1?
teji007 said:
Thank you very much
Sir i upgraded my nx529j to 6.0.1, is there anyway to root it or downgrade to 5.1.1?
Click to expand...
Click to collapse
Yes its possible.
Rooting is absolutely not required.
Follow the steps below
1. Download the latest 1.40 firmware from nubia india website support page. [Direct Link]
2. Then open the zip file and extract the recovery.img to local folder. Transfer the zip as it is to SD card
3. Goto fastboot/bootloader and run following
Code:
fastboot -i 0x19d2 flash recovery recovery.img
4. Then select reboot to recovery from bootloader menu.
5. Select wipe all application
6. Then install the downloaded zip [i hope you have already know how to do that]
It will automatically reboot.
That's it you are done downgrading
Failed
anish.mvj said:
Yes its possible.
Rooting is absolutely not required.
Follow the steps below
1. Download the latest 1.40 firmware from nubia india website support page. [Direct Link]
2. Then open the zip file and extract the recovery.img to local folder. Transfer the zip as it is to SD card
3. Goto fastboot/bootloader and run following
Code:
fastboot -i 0x19d2 flash recovery recovery.img
4. Then select reboot to recovery from bootloader menu.
5. Select wipe all application
6. Then install the downloaded zip [i hope you have already know how to do that]
It will automatically reboot.
That's it you are done downgrading
Click to expand...
Click to collapse
It says wiping failed(please wipe again or do it after reboot) everytime.
and nothing is working even app wipe or data wipe, only cache wiped works and choose from phone storage is also n ot working and sd card is also being not dtetected.
even in TWRP
anish.mvj said:
Yes its possible.
Rooting is absolutely not required.
Follow the steps below
1. Download the latest 1.40 firmware from nubia india website support page. [Direct Link]
2. Then open the zip file and extract the recovery.img to local folder. Transfer the zip as it is to SD card
3. Goto fastboot/bootloader and run following
Code:
fastboot -i 0x19d2 flash recovery recovery.img
4. Then select reboot to recovery from bootloader menu.
5. Select wipe all application
6. Then install the downloaded zip [i hope you have already know how to do that]
It will automatically reboot.
That's it you are done downgrading
Click to expand...
Click to collapse
I insatlled TWRP recovery, even in that wiping is not working. is there any way to install custom roms without rooting.
i actully installed official 6.0.1 update from their official nubia site and installed it.
teji007 said:
I insatlled TWRP recovery, even in that wiping is not working. is there any way to install custom roms without rooting.
i actully installed official 6.0.1 update from their official nubia site and installed it.
Click to expand...
Click to collapse
Dude please be clear what you want to do? Stock rom or custom?
Custom
anish.mvj said:
Dude please be clear what you want to do? Stock rom or custom?
Click to expand...
Click to collapse
.
Sir i want custom Rom. and sir now i am bricked
teji007 said:
.
Sir i want custom Rom. and sir now i am bricked
Click to expand...
Click to collapse
what do you mean by your are bricked?
If you want custom rom
Goto TWRP wipe everything
if above fails then try out following
Option 1:
Goto Bootloader mode and from that menu goto emergency recovery. Try wiping from there if successful, flash a stock rom [Kitkat] and boot to system. After first boot goto settings and reset factory settings. Then goto TWRP and wipe, it will wipe for sure. then you can install any custom rom
Option 2:
Download the oldest firmware from the nubia site [1.37] and flash recovery from there [extract the recovery from zip and flash it in bootloader]. Then use
Code:
fastboot -i 0x19d2 boot TWRP.img
to boot to twrp, don't flash it. Then goto advanced and select adb sideload. swipe to start sideload. after that open the zip you downloaded and got to
Code:
/META-INF/com/google/android/
and open updater-script with any of the text file. Delete the first line and save. update the zip.
open cmd from that folder where zip is located. then type
Code:
adb sideload NX529J_Z69_EN_NSXPK1JD00K137.zip
and press enter. let it complete and then reboot. it should boot to factory firmware. Follow the same procedure to factory reset from settings menu then flash TWRP and flash custom rom
Use the above steps. If all fails then revert back.
Thanks going to try
anish.mvj said:
what do you mean by your are bricked?
If you want custom rom
Goto TWRP wipe everything
if above fails then try out following
Option 1:
Goto Bootloader mode and from that menu goto emergency recovery. Try wiping from there if successful, flash a stock rom [Kitkat] and boot to system. After first boot goto settings and reset factory settings. Then goto TWRP and wipe, it will wipe for sure. then you can install any custom rom
Option 2:
Download the oldest firmware from the nubia site [1.37] and flash recovery from there [extract the recovery from zip and flash it in bootloader]. Then use
Code:
fastboot -i 0x19d2 boot TWRP.img
to boot to twrp, don't flash it. Then goto advanced and select adb sideload. swipe to start sideload. after that open the zip you downloaded and got to
Code:
/META-INF/com/google/android/
and open updater-script with any of the text file. Delete the first line and save. update the zip.
open cmd from that folder where zip is located. then type
Code:
adb sideload NX529J_Z69_EN_NSXPK1JD00K137.zip
and press enter. let it complete and then reboot. it should boot to factory firmware. Follow the same procedure to factory reset from settings menu then flash TWRP and flash custom rom
Use the above steps. If all fails then revert back.
Click to expand...
Click to collapse
Thank you very much sir.
Can i contact you by any other means? whatsapp or any other
teji007 said:
Thank you very much sir.
Can i contact you by any other means? whatsapp or any other
Click to expand...
Click to collapse
Check your private message
adb sideload not working
anish.mvj said:
what do you mean by your are bricked?
If you want custom rom
Goto TWRP wipe everything
if above fails then try out following
Option 1:
Goto Bootloader mode and from that menu goto emergency recovery. Try wiping from there if successful, flash a stock rom [Kitkat] and boot to system. After first boot goto settings and reset factory settings. Then goto TWRP and wipe, it will wipe for sure. then you can install any custom rom
Option 2:
Download the oldest firmware from the nubia site [1.37] and flash recovery from there [extract the recovery from zip and flash it in bootloader]. Then use
Code:
fastboot -i 0x19d2 boot TWRP.img
to boot to twrp, don't flash it. Then goto advanced and select adb sideload. swipe to start sideload. after that open the zip you downloaded and got to
Code:
/META-INF/com/google/android/
and open updater-script with any of the text file. Delete the first line and save. update the zip.
open cmd from that folder where zip is located. then type
Code:
adb sideload NX529J_Z69_EN_NSXPK1JD00K137.zip
and press enter. let it complete and then reboot. it should boot to factory firmware. Follow the same procedure to factory reset from settings menu then flash TWRP and flash custom rom
Use the above steps. If all fails then revert back.
Click to expand...
Click to collapse
Sir, its been 5 mins its "starting ADB sideload feature" but nothing
adb sideload failed
anish.mvj said:
Check your private message
Click to expand...
Click to collapse
Sir ,
ADB sideload failed
teji007 said:
Sir ,
ADB sideload failed
Click to expand...
Click to collapse
Hi how did your device visible in fastboot devices?
I installed adb drivers and all but my device is not listed in fastboot devices..
It is being listed in adb devices but not on fastboot devices. Can you help me with this?
---------- Post added at 08:51 PM ---------- Previous post was at 08:50 PM ----------
teji007 said:
I was trying to install TWRP on my NX529J.
"Adb reboot bootloader command" is working but when i try to install TWRP with command "Fastboot flash recovery recovery.img", it dosent work.
It shows "waiting for devices"
Tried " fastboot devices" NO device there
I tried updating all drivers installed fastboot drivers and zte drivers but still no device found.
In developer settings OEM unlock, USB debugging is on.
and adb mode is also on with *#7678#.
Plz Help.
Click to expand...
Click to collapse
Hi how did your device visible in fastboot devices?
I installed adb drivers and all but my device is not listed in fastboot devices..
It is being listed in adb devices but not on fastboot devices. Can you help me with this?
This TWRP & TWRP Installer is Unofficial.
Official TWRP Can find on following link : https://forum.xda-developers.com/one-power/how-to/official-twrp-motorola-one-power-t3848354
NOTE:- Decryption support available now for TWRP in Fastboot mode only (TWRP installer currently not support for decryption)
Credit & Thanks
@erfanoabdi for bringing officeal TWRP for MOTO one Power
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Warning:-
I am not responsible for bricked devices.
Your warranty will void now. Do it at your own Risk.
Requirement:-
1. Unlock Bootloader Link By @rushiranpise :- https://forum.xda-developers.com/one-power/how-to/guide-motorola-one-power-unlock-relock-t3858797
2. Minimal adb & fastboot install on pc :- https://forum.xda-developers.com/showthread.php?t=2317790
Note: - As google introduce the partation AB for android one devices so there is no recovery partation sepereatly .
We need to patch recovery into Boot.img.
Guide:-
1. Download Twrp recovery.img & TWRP Installer. keep TWRP_recovery.img in adb folder and copy twrp insatller to sd card of phone
2. go to settings/about phone/build number (tap build no for 7 time now developer option available in settings)
3. go to developer option turn on usb debugging .
4. then go to pc download and extract and copy adb fastboot driver folder in Drive C. (or install form net.)
5. Go in fastboot folder which is copied to C. press and hold shift key on your key board and click right key on your mouse . it will show option open cmd here or open power shell window here.
6. Click it, A cmd window will open. or you can open CMD in pc as admin and use cd cmd to adb minimul folder.
type "adb devices" - it show some no of your device in cmd window on pc if not just revoke adb from your phone developer setting and give permission from your phone screen)
type "adb reboot bootloader" your phone reboot in bootloader mode.
Now Type in CMD :-1. fastboot devices (a device no. will show in cmd window on pc) if not means fastboot not installed properly reinstall it.
2. fastboot boot TWRP_recovery.img (phone will boot in twrp temporary)
(Now if you want to read your internal storage in twrp then you need to wipe by select format data option at bottem right of twrp. Beware it will erase all data from your phone ) if you not want then skip this
3. select install option and select sd card from select storage option from twrp.
4. select twrp installer which you copied into sd card and install.
Done TWRP now installed into boot. reboot to recovery and then reboot to system.
Note:- you need to flash this installer after every rom flashing or boot flashing to patch boot again because now twrp is inside the boot itself
New Link TWRP3.3.1 (update)- https://drive.google.com/open?id=1iRpOyUA-FleNwiWO7Rmu5kEeWjgmDBox (decryption support)
Link TWRP3.3.0 (update)- https://drive.google.com/open?id=1k5nZ3AfAd8GEkbPN3ntPj7c922VbqqfZ (decryption support)
As in TWRP 3.3.0 there is no need of twrp installer zip, in advance function of twrp there is option to install ramdisk into boot. this option is available but not working for us . it is installing but stuck on teamwin logo so use only as boot in twrp don't install it.
OLD LINKS : TWRP Installer :-https://drive.google.com/open?id=1mTlm2DRrIfOTeSpB4YnVLKCVcKtPjgF7
TWRP recovery :-https://drive.google.com/open?id=1xzg-TpDOska_w9aExyKVflKBCA8TRD6O
TWRP Decryption Supported Recovery:- https://drive.google.com/open?id=1iYOk0OdddPuylfl0TRI73d9zSYigllwV
How to Take Nandroid Backup and Restore (Only for Decryption support twrp)
1. boot into twrp via fastboot and enter your pin or password to decrypt.
2. Most important - go to backup and unselect oem and system and vendor. (there are two system and vendor unselect one and only select system image and vendor image to take backup)
3. now select storage where to take backup either internal or external or usb otg.
4. take backup.
5. For restore select restore and do.
6. step 2 is most improtant never use these partition to take backup or restore.
Note:- if after restore phone not boot properly or any issue don't panic restore stock rom(which backup you have) & boot and do process again to resotre. always better to restore only boot, system image and vendor image and data only.
Version-4
added all official support in this
Removed MTP & fix bugs for wiping partition
Removed Toybox & included busybox
advance versoin then official TWRP(Compiled with PIE source)
Decryption Working now (Not in installer)
thx.
I get this error, someone knows how to solve it ?
colorist said:
thx.
Click to expand...
Click to collapse
HTML:
PS C:\Program Files (x86)\Minimal ADB and Fastboot> .\fastboot boot TWRP_recovery.img
downloading 'boot.img'...
OKAY [ 0.615s]
booting...
FAILED (remote failure)
finished. total time: 1.522s
I have my bootloader unlocked , and I'm trying to install TWRP in my moto one
I get this error, someone knows how to solve it ?
angelogiuseppe said:
HTML:
PS C:\Program Files (x86)\Minimal ADB and Fastboot> .\fastboot boot TWRP_recovery.img
downloading 'boot.img'...
OKAY [ 0.615s]
booting...
FAILED (remote failure)
finished. total time: 1.522s
I have my bootloader unlocked , and I'm trying to install TWRP in my moto one
I get this error, someone knows how to solve it ?
Click to expand...
Click to collapse
same here, any help ???
Amaterasus said:
same here, any help ???
Click to expand...
Click to collapse
try transferring the .img file to sd card first and then try the same command
maybe it will help
you can try these methods too:
i) check if the bootloader is getting lock again
ii) you've turned on oem unlocking in develeper options
iii) check the partiton isn't corrupted
and if these does not help you try factory resetting your device.
good luck
we have to flash installer after boot into recovery?
ZeroVirus said:
we have to flash installer after boot into recovery?
Click to expand...
Click to collapse
yes bro
and you'll have to flash it everytime you install a custom rom
---------- Post added at 05:27 PM ---------- Previous post was at 05:24 PM ----------
Amaterasus said:
same here, any help ???
Click to expand...
Click to collapse
if you are still getting this error
I find a way to get through it
just enter the command and press enter without connecting your phone
it will show that its waiting for device
then get into the bootloader by holding down power and volume down button
then connect the phone to pc
it should do the work
Does the latest twrp 3.3.0 works with the flash command or I can only boot it?
I am currently using the old version with the twrp installer.
Wanted to know if the latest twrp is working with flashing recovery partition.
Plz port multi rom twrp for one power
Not working
nerdfail said:
Does the latest twrp 3.3.0 works with the flash command or I can only boot it?
I am currently using the old version with the twrp installer.
Wanted to know if the latest twrp is working with flashing recovery partition.
Click to expand...
Click to collapse
Yes same question here ??
P30 Note?
Hello,
will it work with Motorola P30 Note (XT1942-1)? Basically the same phone, but without LTE B20.
TWRP not decrypt internal memory.
Hi sir.
I am using TWRP recovery 3.2.3 on my Motorola one Power.
I am facing problem internal memory are showing incrypted.
How can I fix this.?
I also used it new updates. They are not working.
When I flashed this twrp-3.3.1-1-chef.img internal file was decrypt but twrp shows devices unrooted.
Can you help me out sir.
I'm trying to install twrp latest version 3.6 plus but after boot it's not open stuck at the twrp logo after reboot
Hi,
Here is a long story of bricking my device, I wanted to downgrade my device from Oreo to Nougat, and somehow I installed wrong software, mine is RNE-L21 and after successful downgrade with this method:
https://www.youtube.com/watch?v=_3vqb8hPZIQ
version of software I installed: RNE-L21C461B153CUSTC461D001
my device was NEO-something, in settings it showed 3GB of RAM instead of 4GB, screen resolutution 1280x720 instead of fullHD and 32GB of internal memory instead of 64, so I wanted to change that.
This time I downloaded (not so sure about this now) proper version of firmware: RNE-L21C432B135CUSTC432D001, and used another method because previous method didnt work, link:
https://forum.xda-developers.com/showpost.php?p=76503686&postcount=46
the HuRUpdater scrpit worked fine, I booted up the device and nothing was changed, so I was like, well, ok then.
but then I noticed that my bootloader was locked, so I wanted to unlock it, and after typing the *fastboot oem unlock code* and selecting yes on my device, It rebooted and just stuck at the "Powered by andriod" logo.
I was trying to enter TWRP but id doesnt work, its stuck at the loading screen, I was unable to enter fastboot, but now I figured out that when I discharge it, I'm able to enter fastboot.
So now I'm stuck, I don't know what should I do.
I saw a guide for flashing .img files from UPDATE.APP, but that guide was for Oreo, and I've got diffrent .img files inside my Nougat UPDATE.APP so I don't want to risk:
https://forum.xda-developers.com/mate-10/help/mate-10-lite-bricked-t3794236
sentavn said:
you should format by using fastboot. First download your stock ROM and extract with Huawei Firmware Extracter. Select UPDATE.APP and extract following files:
erecovery_kernel.img
erecovery_ramdisk.img
erecovery_vbmeta.img
cust.img
erecovery_vendor.img
kernel.img
ramdisk.img
recovery_vbmeta.img
recovery_vendor.img
system.img
Reboot your device in to fastboot mode (recovery mode) and flash those files one by one:
fastboot flash erecovery_kernel erecovery_kernel.img
...
fastboot flash system system.img
//
Erase your userdata space:
fastboot -w
//reboot
fastboot reboot
Now go to your stock recovery and do factory reset, wide cache.
Now your device back to stock OREO
Click to expand...
Click to collapse
Any Ideas?
HOW I FIXED:
I downloaded this EMUI 5 Nougat, Thanks to bozka1:
https://androidhost.ru/5SZ
I extracted UPDATE.APP file using Huawei Update Extractor.
I was trying to flash everything via fastboot: BOOT.img, RECOVERY.img, RECOVERY2.img, CUST.img, SYSTEM.img but nothing helped me.
I found out what you can flash via fastboot here:
https://forum.xda-developers.com/general/general/huawei-fastboot-commands-t3850123
There was no hope for me, so I tried to flash USERDATA.img
fastboot flash userdata USERDATA.img
Click to expand...
Click to collapse
And then cmd promped something unusual:
target reported max download size of 471859200 bytes
sending 'userdata' (24576 KB)...
OKAY [ 0.646s]
writing 'userdata'...
(bootloader) success to erase cryypt info in oeminfo
OKAY [ 1.401s]
finished. total time: 2.049s
Click to expand...
Click to collapse
Then I proceeded to flash: BOOT.img, RECOVERY.img, RECOVERY2.img and CACHE.img
I didn't flash SYSTEM.img because I flashed it before like 1500 times.
My phone didn't work yet so I used the DLOAD method because RECOVERY finally worked, so I shut down the device and used three buttons combo:
First holding Volume Up, Volume Down and then pressing Power Button.
There is a documentation in the firmware I downloaded, SDcard must be in exFAT format.
Thank You bozka1.
voltzero2 said:
Hi,
Here is a long story of bricking my device, I wanted to downgrade my device from Oreo to Nougat, and somehow I installed wrong software, mine is RNE-L21 and after successful downgrade with this method:
https://www.youtube.com/watch?v=_3vqb8hPZIQ
version of software I installed: RNE-L21C461B153CUSTC461D001
my device was NEO-something, in settings it showed 3GB of RAM instead of 4GB, screen resolutution 1280x720 instead of fullHD and 32GB of internal memory instead of 64, so I wanted to change that.
This time I downloaded (not so sure about this now) proper version of firmware: RNE-L21C432B135CUSTC432D001, and used another method because previous method didnt work, link:
https://forum.xda-developers.com/showpost.php?p=76503686&postcount=46
the HuRUpdater scrpit worked fine, I booted up the device and nothing was changed, so I was like, well, ok then.
but then I noticed that my bootloader was locked, so I wanted to unlock it, and after typing the *fastboot oem unlock code* and selecting yes on my device, It rebooted and just stuck at the "Powered by andriod" logo.
I was trying to enter TWRP but id doesnt work, its stuck at the loading screen, I was unable to enter fastboot, but now I figured out that when I discharge it, I'm able to enter fastboot.
So now I'm stuck, I don't know what should I do.
I saw a guide for flashing .img files from UPDATE.APP, but that guide was for Oreo, and I've got diffrent .img files inside my Nougat UPDATE.APP so I don't want to risk:
https://forum.xda-developers.com/mate-10/help/mate-10-lite-bricked-t3794236
Any Ideas?
Click to expand...
Click to collapse
What is your original location, C461?
Which oeminfo you have flashed?
bozka1 said:
What is your original location, C461?
Which oeminfo you have flashed?
Click to expand...
Click to collapse
My original location is C432, I don't remember flashing any oeminfo
voltzero2 said:
My original location is C432, I don't remember flashing any oeminfo
Click to expand...
Click to collapse
Single SIM/dual SIM ?
Try reboot your phone into fastboot mode and use command
fastboot oem get-build-number
you'll see the number of your current firmware
bozka1 said:
Single SIM/dual SIM ?
Try reboot your phone into fastboot mode and use command
fastboot oem get-build-number
you'll see the number of your current firmware
Click to expand...
Click to collapse
It's dual sim,
the number of current firmware: System 5.1.0.98(08K5)
voltzero2 said:
It's dual sim,
the number of current firmware: System 5.1.0.98(08K5)
Click to expand...
Click to collapse
Okay, phone still locked ? What shows the screen in fastboot mode - phone and FRP ?
bozka1 said:
Okay, phone still locked ? What shows the screen in fastboot mode - phone and FRP ?
Click to expand...
Click to collapse
It says its unlucked:
https://imgur.com/a/LEDKWFr
I hope this link works
Download oeminfo
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Copy it to SD card.
Download TWRP
https://mega.nz/#!IodXAKBB!_VrqsMSxVw_NkXwfUIQb32mG_QAMd4HQ8_BtqmeHI94
and Service ROM
https://androidhost.ru/5SZ
. Extract dload folder from Service ROM and copy it to SD card.
Try to install TWRP: Copy the downloaded TWRP file to the Minimal ADB and fastboot folder, reboot to fastboot mode . Launch Minimal ADB , In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery2 TWRP-MATE.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button Volume Up after rebooting.
Reboot to TWRP, Select Install, navigate to oeminfoRNE-L21C432 and confirm. Go back to the TWRP main menu, select Reboot and Power Off.
Now you can try flash the Service ROM with three buttons combo. GL!
bozka1 said:
Download oeminfo
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Copy it to SD card.
Download TWRP
https://mega.nz/#!IodXAKBB!_VrqsMSxVw_NkXwfUIQb32mG_QAMd4HQ8_BtqmeHI94
and Service ROM
https://androidhost.ru/5SZ
. Extract dload folder from Service ROM and copy it to SD card.
Try to install TWRP: Copy the downloaded TWRP file to the Minimal ADB and fastboot folder, reboot to fastboot mode . Launch Minimal ADB , In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery2 TWRP-MATE.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button Volume Up after rebooting.
Reboot to TWRP, Select Install, navigate to oeminfoRNE-L21C432 and confirm. Go back to the TWRP main menu, select Reboot and Power Off.
Now you can try flash the Service ROM with three buttons combo. GL!
Click to expand...
Click to collapse
So I'll have to wait a little before I'll download Service ROM, my internet connection isn't the greatest, but I flashed Your TWRP and unfortunately it doesn't work;
If I hold the Power button and Volume Up - the same story as before, I see the loading TWRP screen and nothing happends,
If I let the device to boot up and then press only the Volume Up button - it says "Your device is booting up" and nothing happens.
By the way, what can happen when I'll use "fastboot flash recovery something.img" instead of recovery2?
EDIT:
I did some testing and Your TWRP doesn't boot at all on my device, I flashed another one, Catuva21 3.1.1 Nougat, and that is the one that I had before - it is booting but never loads.
voltzero2 said:
By the way, what can happen when I'll use "fastboot flash recovery something.img" instead of recovery2?
Click to expand...
Click to collapse
TWRP will automatically overwrite Stock recovery, it's impossible to flash something from dload without Stock recovery .
Using command "recovery2" you will install TWRP over eRecovery .
Try flash Service ROM from SD card without TWRP & oeminfo flashing, but Im not sure... your system is heavily damaged and incomplete .
bozka1 said:
TWRP will automatically overwrite Stock recovery, it's impossible to flash something from dload without Stock recovery .
Using command "recovery2" you will install TWRP over eRecovery .
Try flash Service ROM from SD card without TWRP & oeminfo flashing, but Im not sure... your system is heavily damaged and incomplete .
Click to expand...
Click to collapse
So the phone would boot up the TWRP without pressing anything? Damn, I might have done that typo error... Do You know if I can restore the stock recovery from the UPDATE.APP file? I mean flash it
voltzero2 said:
So the phone would boot up the TWRP without pressing anything? Damn, I might have done that typo error... Do You know if I can restore the stock recovery from the UPDATE.APP file? I mean flash it
Click to expand...
Click to collapse
Use Huawei Update Extractor and extract RECOVERY.img , copy it to the "Minimal ADB and fastboot" folder . Command :
fastboot flash recovery RECOVERY.img
bozka1 said:
Use Huawei Update Extractor and extract RECOVERY.img , copy it to the "Minimal ADB and fastboot" folder . Command :
fastboot flash recovery RECOVERY.img
Click to expand...
Click to collapse
Yeah, I've done it already, unfortunately nothing changed. How about BOOT.img? Can this influence something?
EDIT:
I also wonder about just following the steps in my first post, I've got UPDATE.APP for Oreo, but I don't know if it will only make it worse.
bozka1 said:
Download oeminfo
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Copy it to SD card.
Download TWRP
https://mega.nz/#!IodXAKBB!_VrqsMSxVw_NkXwfUIQb32mG_QAMd4HQ8_BtqmeHI94
and Service ROM
https://androidhost.ru/5SZ
. Extract dload folder from Service ROM and copy it to SD card.
Try to install TWRP: Copy the downloaded TWRP file to the Minimal ADB and fastboot folder, reboot to fastboot mode . Launch Minimal ADB , In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery2 TWRP-MATE.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button Volume Up after rebooting.
Reboot to TWRP, Select Install, navigate to oeminfoRNE-L21C432 and confirm. Go back to the TWRP main menu, select Reboot and Power Off.
Now you can try flash the Service ROM with three buttons combo. GL!
Click to expand...
Click to collapse
Do I have to install oeminfo to be able to use the "three buttons combo"? Because I tried it today and it doesn't work, phone is just stuck at "Your device is booting.." screen, guess I'm out of luck
I fixed it, solution will be attached to first post.
Thanks to bozka1 who gave me this helpful link:
https://androidhost.ru/5SZ
voltzero2 said:
I fixed it, solution will be attached to first post.
Thanks to bozka1 who gave me this helpful link:
https://androidhost.ru/5SZ
Click to expand...
Click to collapse
You're welcome
Hi help me
Bozka1
My huawei mate 10 lite is brick stock on erecovery what can i do now
Lj08 said:
My huawei mate 10 lite is brick stock on erecovery what can i do now
Click to expand...
Click to collapse
Hi, have you tried to do something with your phone? Can you provide some info?
voltzero2 said:
Hi, have you tried to do something with your phone? Can you provide some info?
Click to expand...
Click to collapse
Voltzero2
I try factory reset wipe catch and no result just going back to erecovery
Lj08 said:
Voltzero2
I try factory reset wipe catch and no result just going back to erecovery
Click to expand...
Click to collapse
Alright, so did it just happened randomly or did you tried to do something with your phone? Did you unlocked bootloader or flashed custom recovery etc? You need to explain what happened, that's quite important if you want someone to help you.
Hi, I'm trying to flash OOS rom on my phone, Curtana. But I got an error when flash it.
The Terminal facing System: (REMOTE: Partition not found).
And I'm stuck at fastboot, can't not boot system or to recovery.
Thanks for your help.
nhokloz105 said:
Hi, I'm trying to flash OOS rom on my phone, Curtana. But I got an error when flash it.
The Terminal facing System: (REMOTE: Partition not found).
And I'm stuck at fastboot, can't not boot system or to recovery.
Thanks for your help.
Click to expand...
Click to collapse
OOS ?!?!? is there OxygenOS for curtana?
where did you get it?
can i have a link or adress please...
javidman said:
OOS ?!?!? is there OxygenOS for curtana?
where did you get it?
can i have a link or adress please...
Click to expand...
Click to collapse
You can get here https://t.me/curtanacloud/472
I have found a solution. I flashed stock rom via MiFlash to have fastbootd (not fastboot). Then reboot to Bootloader and type 'fastboot reboot fastboot' to boot to fastbootd. Then I can flash any system.img I want.
Another method, but I've try yet.
1. Unlock bootloader
2. Flash LOS recovery
3. Boot bootloader
In CMD
4. Enter: 'fastboot reboot fastboot'
5. Then you will see 'fastbootd', enter 'fastboot flash system system.img' (system.img = gsi img)
6. enter 'fastboot reboot recovery'
In recovery
7. go to factory reset
8. select format data/factory reset then format data
9. then select reboot system
Hi, first of all, I'm not a dev or else just user who had difficulties to flash GSI on my phone... Was 7 years with a samsung galaxy Note 3, with twrp....So easy to flash....
with the help of @gr0ndpa, thanks to him.....
FLASH GSI
Now I will explain how to flash easily with files attached
1/ first of all you need a phone and drivers installed, use xiaomi pc suite, unzip and install it
2/ you need to activate USB debug in dev options.
3/ dl adb folder unzip it and put in C
4/ run command and type
Code:
cd /adb
5/ then
Code:
adb devices
to check if phone recognised
6/
Code:
adb reboot bootloader
once in fast boot
7/
Code:
fastboot flash vbmeta vbmeta.img
wait finished type to enter in fastbootD
8/
Code:
fastboot reboot fastboot
9/
Code:
fastboot flash system
LiR 313.XXX.img
you will have a system error, but wait the flash begin in few seconds
at the end wait ok then
10/
Code:
fastboot reboot recovery
on stock recover
11/ wipe data and reboot with +/- and PWR
and you're done...
In case you want to flash custom kernel or patched boot image to root with magisk, you have to
12/
Code:
adb reboot bootloader
Copy kernel boot image to C drive and rename kernel boot image to boot.img.
13/
Code:
fastboot flash boot c:\boot.img
14/
Code:
fastboot reboot
In case you want to flash twrp put the file to adb folder and type in fastboot
15/
Code:
fastboot boot twrp.img
Downloads for : Xiaomi Mi 11 Lite 5G | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
You can check what I ve done on tuto ss...
if you have some comments, don't hesitate...
I flashed LiR 18.1 rom and very happy with it.....
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++==================================================================================================================================================================================================================++
Flash ROM
This now how to flash ROM on your device, it's convenient for all roms like LOS, corvus, awaken...
First you need all the proper drivers installed and unlocked bootloader, USB debugging all of that stuff.
Now open up a cmd/terminal , and put the files i sent and the ROM file in the folder from where you're opening the cmd/terminal and connect the phone (you may need to put ./ as an suffix for all the commands if you're on linux)
Type
Code:
adb reboot bootloader
Then type
Code:
fastboot devices
to see if everything is ok
Then type
Code:
fastboot flash boot_ab boot.img
(you can drag and drop the file instead of typing it)
After that's done type
Code:
fastboot flash vendor_boot_ab vendor_boot.img
(you can drag and drop this too if you want)
Code:
fastboot flash dtbo dtbo.img
(you can drag and drop this too if you want)
After that's done type
Code:
fastboot reboot recovery
This will boot you into a recovery and now you need to go to wipe and format data
After that go to apply update then adb sideload then
In the cmd type
Code:
adb sideload rom.zip
for example (you put the ROM zip here you can drag and drop it)
Wait for that to finish it will go to 47% and on the phone it will show step 1/2 then step 2/2
and when it's done it's gonna show an error
adb: failed to read command: No error
Then you can reboot to system
Hello thank your for the short HowTo. Unfortunately im stuck on invalid sparse error. Could you pls post a fix to solve this? Would appreciate your help.
hardshell said:
Hello thank your for the short HowTo. Unfortunately im stuck on invalid sparse error. Could you pls post a fix to solve this? Would appreciate your help.
Click to expand...
Click to collapse
You have to wait at least 30 sec after the error appear...
Are you sure you are on fastbootD???
tuto modified and completed to also root device with magisk and patch boot.img
when i restart into fastboot, it is frozen.
dy2592 said:
when i restart into fastboot, it is frozen.
Click to expand...
Click to collapse
normal, nothing happens on fastboot....when you flash, only thing is on your computer, not on screen..
cant seem to get this installed =(
rayman95 said:
8/
Code:
fastboot reboot fastboot
Click to expand...
Click to collapse
After I enter this, it just stays on waiting for any device.
Update: I was able to figure it out. My device had no drivers so I went search through updates on windows and installed a LeMobile Android driver os it shows up properly in device manager.
How does one install gapps?
dy2592 said:
After I enter this, it just stays on waiting for any device.
View attachment 5419437
Update: I was able to figure it out. My device had no drivers so I went search through updates on windows and installed a LeMobile Android driver os it shows up properly in device manager.
Click to expand...
Click to collapse
because you don't have xiaomi drivers installed...install xiaomi pc suite and you will have drivers installed...
duplicate
rayman95 said:
In step 14, I encountered the error "fastboot: error: ANDROID_PRODUCT_OUT not set" after executing the fastboot flash system command. what do I need to do?
Click to expand...
Click to collapse
Did you insert the img at the end?
Fastboot flash system LIRxxxxxxxxxxxx.img
you have to put your rom to adb folder and dont forget to add .img at the end
rayman95 said:
you have to put your rom to adb folder and dont forget to add .img at the end
Click to expand...
Click to collapse
1.img is your rom Is there anything else missing?
dy2592 said:
Did you insert the img at the end?
Fastboot flash system LIRxxxxxxxxxxxx.img
Click to expand...
Click to collapse
yaha your right thank you so much
rayman95 said:
you have to put your rom to adb folder and dont forget to add .img at the end
Click to expand...
Click to collapse
thank I solved my problem. Now I have another problem, how to install GAPPs
Patrick Star_ said:
thank I solved my problem. Now I have another problem, how to install GAPPs
Click to expand...
Click to collapse
run twrp, it's explain in 1st post or maybe try with magisk...I can install minimicroG nogoolag with it..
rayman95 said:
run twrp, it's explain in 1st post or maybe try with magisk...I can install minimicroG nogoolag with it..
Click to expand...
Click to collapse
I tried to use twrp to brush into GAPP, but the error is 70. How can I solve it? I don't know if there is a problem with my twrp. Can you send a tutorial on xiaomi11 Lite 5g installing twrp? Thank you very much
Patrick Star_ said:
I tried to use twrp to brush into GAPP, but the error is 70. How can I solve it? I don't know if there is a problem with my twrp. Can you send a tutorial on xiaomi11 Lite 5g installing twrp? Thank you very much
Click to expand...
Click to collapse
In case you want to flash twrp put the file to adb folder and type in fastboot
15/
Code:
fastboot boot twrp.img
And twrp link is in post 1..maybe you choose bad gapps variant