Hi to all, thank you for your support there is a lot of information of Android system is this forum, I need help.
I just buy a HTC M9 and I'm trying to unlock the bootloader but i can't, I recive this message in CMD
C:\Users\Kevin\AppData\Local\Android\android-sdk\platform-tools>fastboot flash u
nlocktoken Unlock_code.bin
target reported max download size of 800000000 bytes
sending 'unlocktoken' (0 KB)...
OKAY [ 1.013s]
writing 'unlocktoken'...
(bootloader) flash unlocktoken
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X01, enable unlock
FAILED (remote: UnlockToken Verify Fail!!)
finished. total time: 1.118s[/B][/B][/B]
And the download mode change
Says 100% and don't do anything does not show the image of HTC DEV Unlock bootloader?
Could you help me please, thanks in advance.
Related
Can someone help me,I just got my replacement phone and I fellow the htc Instructions but it just sits on the bootloader it says
C:\rootevo3dnew>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.151s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.007s]
finished. total time: 0.160s
but doesnt do anything after??? please help someone???
btw I did this just yesterday with my sister phone
on the step 13 of the process after i send the :
c:\android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.151s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.006s]
finished. total time: 0.157s
My phone is not being prompted with the unlock bootloader screen! it just stays at the white screen with the fastboot usb. Anyone have some insight?
Yea, a lot of people have run into this. Download an run the appropriate RUU for your phone and HTC Unlock will work. See guide/flashing notes in my signature for details and links.
C:\Users\Raz\Desktop\rootevogood\rootevo3dnew>fastboot flash unlocktoken Unlock_
code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.152s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.161s
C:\Users\Raz\Desktop\rootevogood\rootevo3dnew>fastboot flash recovery cwm-4.0.1.
4-shooter.img
sending 'recovery' (4832 KB)...
OKAY [ 1.133s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.747s
what am i doing wrong can someone pls help hboot 1.5 s-on all i wanna do is flash roms and kerns...but i must be doing something wrong
The code is APPLE.
but seriously wtf are you trying to do.
Sent from my PG86100 using Tapatalk 2
He is trying to unlock the bootloader via htcdec way
Sent from my PG86100 using xda premium
gotraz said:
C:\Users\Raz\Desktop\rootevogood\rootevo3dnew>fastboot flash unlocktoken Unlock_
code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.152s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.161s
C:\Users\Raz\Desktop\rootevogood\rootevo3dnew>fastboot flash recovery cwm-4.0.1.
4-shooter.img
sending 'recovery' (4832 KB)...
OKAY [ 1.133s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.747s
what am i doing wrong can someone pls help hboot 1.5 s-on all i wanna do is flash roms and kerns...but i must be doing something wrong
Click to expand...
Click to collapse
Did you unlock it fine? Get that unlock bootloader splash screen?
Admittedly I am still a noob and learning a lot via these forums, If you are trying to unlock your bootloader via HTCDev visit android forums and search in the HTC EVO 3d section "Complete Newbie's Guide to rooting and flashing ROMs/Kernels using fastboot" by JeroFld this newbie guide will help, It helped me alot.
================================================== =========================
Device: HTC EVO 3D AKA 3VO
Rom: ZR3Dv2.2A
Kernel: 2.6.35.13-g277012f [email protected] #1 SMP PREEMPT Mon Dec 12 15:59:16 CST 2011
Recovery: 4EXT
Baseband: 1.06.00.1216
Build Number: 2.17.651.5 CL245066 release-keys
Android Version: 2.3.4
HTC Sense Version: 3.0
H.Boot 1.5 Unlocked
S-On
gotraz said:
C:\Users\Raz\Desktop\rootevogood\rootevo3dnew>fastboot flash unlocktoken Unlock_
code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.152s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.161s
C:\Users\Raz\Desktop\rootevogood\rootevo3dnew>fastboot flash recovery cwm-4.0.1.
4-shooter.img
sending 'recovery' (4832 KB)...
OKAY [ 1.133s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.747s
what am i doing wrong can someone pls help hboot 1.5 s-on all i wanna do is flash roms and kerns...but i must be doing something wrong
Click to expand...
Click to collapse
when you wrote unlock code.bin , it should ask you to confirm, on your phone's screen , after that your bootloader will be unlocked and you can flash recovery later.
If you aren't getting the confirmation screen , running RUU might help
mnomaanw said:
when you wrote unlock code.bin , it should ask you to confirm, on your phone's screen , after that your bootloader will be unlocked and you can flash recovery later.
If you aren't getting the confirmation screen , running RUU might help
Click to expand...
Click to collapse
Running the latest 2.17 RUU will help if your CDMA.. Sounds like your phone was never unlocked..
Hi there again Reaper24 & everyone.
If the op is still trying to unlock on hboot 1.50 they may find the guide in my signature helpful. Like Reaper24 said, if u r stuck at step 13 of the unlock process, u need to rerun the full Ruu all the way thru and try again.
Sent from my PG86100 using Tapatalk
Hi,
I can't unlock the booloader I got Aleways this message
C:\Users\\Desktop\adb>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY [ 0.144s]
writing 'unlocktoken'... FAILED (remote: unlock token check failed)
finished. total time: 0.152s
my HBOOT is 1.53.007
Thanks to help
Any Help
Please
Is it possible to get S-off without unlock BOOTLOADER?
Thanks
Hello guys can you help me, i cant unlock the bootloader of HTC Desire 10 PRO cos the command "fastboot flash unlocktoken Unlock_code.bin" is not working getting this message below again n again. i have checked usb debugging & OEM Unlock options too in Developer options too. i really don't understand why is this happening. Also there is not much help from this device available here on XDA or other sites too.
M:\HTCRoot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.042s]
writing 'unlocktoken'...
(bootloader) flash unlocktoken
(bootloader) [KillSwitch] : /dev/block/platform/mtk-msdc.0/11230000.msdc
(bootloader) [KillSwitch] Last Byte is 0X01, enable unlock
FAILED (remote: UnlockToken Verify Fail!!)
finished. total time: 0.132s
need help guys..
here is more info if required.... guys plz help
C:\Users\Desktop\platform-tools>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_a56dj_pro_dtwl
(bootloader) version: 1.0
(bootloader) max-download-size: 1596000000
(bootloader) serialno: LC73XZ9*****
(bootloader) current-slot:
(bootloader) imei: 35**520********
(bootloader) version-main: 1.18.400.22
(bootloader) boot-mode: download
(bootloader) version-baseband: READ version-baseband ERROR
(bootloader) version-bootloader: 1.01.0000(8804eff8)
(bootloader) mid: 2PYA10000
(bootloader) cid: HTC__060
all:
finished. total time: 0.037s
Same error here. Tried Desire* and other supported devices from the HTCdev site.
Kindly help which device to choose from dev site.
D:\HTC Desire 10 PRO\ADB-Windows> fastboot flash unlocktoken Unlock_code.bin
target reported max download size of 1602400000 bytes
sending 'unlocktoken' (0 KB)...
OKAY [ 1.009s]
writing 'unlocktoken'...
(bootloader) flash unlocktoken
(bootloader) [KillSwitch] : /dev/block/platform/mtk-msdc.0/11230000.msdc
(bootloader) [KillSwitch] Last Byte is 0X01, enable unlock
FAILED (remote: UnlockToken Verify Fail!!)
finished. total time: 1.033s
princepavs said:
Hello guys can you help me, i cant unlock the bootloader of HTC Desire 10 PRO cos the command "fastboot flash unlocktoken Unlock_code.bin" is not working getting this message below again n again. i have checked usb debugging & OEM Unlock options too in Developer options too. i really don't understand why is this happening. Also there is not much help from this device available here on XDA or other sites too.
M:\HTCRoot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.042s]
writing 'unlocktoken'...
(bootloader) flash unlocktoken
(bootloader) [KillSwitch] : /dev/block/platform/mtk-msdc.0/11230000.msdc
(bootloader) [KillSwitch] Last Byte is 0X01, enable unlock
FAILED (remote: UnlockToken Verify Fail!!)
finished. total time: 0.132s
need help guys..
Click to expand...
Click to collapse
Are you still able to unlock? I have the same issue too. Stuck here
I don't know if this one helps you too but I was unable to unlock bootloader from bootloader mode and I tried it from download mode. It was successfully done with fastboot.... command. Root? I used Magisk. only problem is it takes 5 minutes to start up every time I reboot.
carlochiefsg said:
Are you still able to unlock? I have the same issue too. Stuck here
Click to expand...
Click to collapse
naaa never worked.. so gave this phone to my dad as he's a normal android user... must say MTK processors r the worst
princepavs said:
naaa never worked.. so gave this phone to my dad as he's a normal android user... must say MTK processors r the worst
Click to expand...
Click to collapse
to be exact HTC MTK processor is the worst, HTC lied about all HTC phones boot loader is unlockable.... BS!