Hey ALL, so I need my phone back ASAP. So here's my problem...
This happened to me a second time, I followed a guide and ported a TWRP for my phone, which after flashing via Rashr, the TWRP worked fine but my SIM cards wouldn't show, BUT Wi-Fi works, its not like all the other problems, IMEI is also invalid but rewriting IMEI fixes no IMEI issue but the SIMs don't work.
Last time I had to reflash the whole firmware, but this time im hoping for some good responses and hopefully a solution.
I had taken a backup of the "nvram" folder but no use ,MTK Droid tools doesn't support Lollipop, Mobile Uncle Tools also doesn't show any effectiveness.
Im stuck, I'll leave reflash the Last Option.
For now GUYS, HELP
About my phone
QMobile
Model: S9
Android: 5.1 Stock
MediaTek 6592
Rooted
Link With full details and specs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are some screen shots, as u can see in the 1st and 3rd pics, the Radio,signal etc are all blank, while that is not the case usually with other who have IMEI problems, they have working Radio, they have signal, my case is different...
Please, kindly help me out.....
Oh well, THANKS everyone for helping, i had no choice but to do a full flash..................
Related
Hello!
So, i have this phone iGlo, a109 (DUAL SIM) 2G/GSM/GPRS/EDGE 850,900,1800,1900MHz, MTK 6575 1GHz, 256MB DDR3, and i installed another ROM but from iGlo a109+ witch has 3G support. NOW, the ROM is installed completly, it works but here are some problems that i found the wifi doesn`t work, and although the simcards are inserted, there's now signal,no network, so can`t call or use them. AND also, when i try to check the IMEI, with *#06# there`s no IMEI, just an empty OK message.
****** After quite some time spent,shearching,reading the net,i found this tool IMEI Write MTK v1.5 , so i'm asking here before i test it, IF i try to put my imei back in my phone, using this, it will work ??
****** If the above post doesn't work, what can i do? is there another user here,that has a phone like mine, or can some one PORT a rom for my phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hello,
did you solve your problem?
because I got problem with the same phone. Maybe you can help me.
Same Problem
I have te same problem. Did you find any solution?
Hi
need your help. Bought this phone from Ali Express, sold as Huawei Honor 6 but it is MT6572. Instead of 4 GB RAM it has I think 1 GB. Storage is 8 or 16 GB intead of 32 GB. Processor is MT6572 not 6592. Now I wanted it to display its right spec so that I can use it accordingly. I rooted it and installed CWM recovery and made a backup of original rom. After that I went to needrom and downloaded different roms to try out with SP Flash tools but here the disaster struck. I bricked it with the first flash. I didn't loose hope and kept trying. Only rom which worked was this one from needrom http://www.needrom.com/download/alps-honor-3c/ . Only problem that touch screen didn't work with it. so I could not root it or install CWM to go back to the original one . I am including the pictures from original phone and if needed can provide the backup I made. Any help will be greatly appreciated
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Still waiting for some kind of help
Hello,
I clone one firmware from one who s working, but when i try to write it it say wrong scatter, i u like it i can upload it.
hi guys.
firstly its my very first thread so please ignore the poor posting.
i have a htc one m9+ supreme camera (m9px) hong-kong version.
after flashing a faulty SU the official/stock firmware went faulty and didn't boot back on.
i had to wipe the whole device to be able to try new rom or even firmwares. here is the problem i cant find anything for this phone!
sure i did manage to find a Taiwan version which i flashed but Baseband, radio and ota is not working.
i found a HK version on "easy-firmware.com" and "ir-file.com" but i think it was a fake one (check out the pic).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thus no chance found there. interesting thing is i didnt find the m9px recovery i managed to find a m9pw (htc m9+) and flashed it surprisingly its working , yet it seems because of the difference in models (hiau_ml_tuhl for m9+) and (hiaur_ml_tuhl for m9+ sc) every time that i want to install ota it goes to recovery and recovery cant flash the ota.
so if someone could help me out in any ways i would really appreciate it. or would you send a back up your phone (same model) to me to flash would be awesome too.
thanks again
https://drive.google.com/file/d/0B0IdPNEcCiEZRkppWWFuZU1ySWs/view?usp=sharing
My cell started with a loop to try to restore from the factory, so I tried using odin to put a new ROM, and I can not complete the procedure, it follows the image of the error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bution said:
My cell started with a loop to try to restore from the factory, so I tried using odin to put a new ROM, and I can not complete the procedure, it follows the image of the error
Click to expand...
Click to collapse
Greetings and welcome to assist. Have you tried kies/smart switch emergency firmware recovery to see if that works ?
Good luck
Sawdoctor
Yes, not support the model/Serial Number
SM-G530H/DS
I got same trouble, with my G530H XSE, just like you.
i dont know where i want to do. so many attempt i've been tryin.
any idea to help us? we need to help
emergency update from samsung kies, isn't working .
I was having a problem with 3 units.
G530h, 2 G530BT
by USB nda it worked .....
Pit error
without adding the pit error system
I solved all 3 of my clients by eMMC written using Medusa-pro
I did not find any other way
Hello All,
I need help, I was searching for Sony Xperia R1 plus hard bricked phone solution. Went on 3-4 years of journey and I'm stuck till now. I've used Xperifirm, Flasher tool everything I found on internet. But, all vent into vain. Sony never publicily released R1 plus rom. I chased them on emails, Twitter, Calls, to release the firmware but being a noob nobody has took me serious. So, to all the developers here I wanna ask for little help. I found a way on one website "https://forum.gsmhosting.com/vbb/f9...us-g2299-hang-logo-done-2619023/#post14707534" but rom here doesn't have .mbn format in it and I was unable to afford UMT_Qcfire to flash the files I got in this website. I know this place doesn't deals with my problems but reading all the stuff up in the comments made be believe experts are here. Is there any way to flash my phone with the files I received without using UMT. I'm attaching screenshot of the ROM I got.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@sbhawani051 , this looks to be structured for QFIL flasher/programmer (flat build). You can search for the software and drivers, or go to these links to download what is necessary for the device to be recognized. I don't know what the loader/board is displaying, is it blinking red LED or can you get it to connect in other modes such as fastboot?