I've seen a few questions about downgrading from 6.0.1 to 5.1.1 and that odin won't allow it.
It's because of secure bootloader, that won't allow downgrade of binary version.
I've made a flashable zip for twrp of the latest 5.1.1 released with csc NEE. (because thats my region)
This will leave your current bootloader version and baseband version, compared to the odin file.
I just did some very light debloating of some microsoft crap as far as I can remember. Maybe some google app as well, like hangout.
No root added, no tweaks, just pretty much stock. Edit: Forgot to mention it's deodexed and zipaligned.
Thought I could share it if anyone needs it.
DOWNLOAD AFH:A310F_5.1.1_NEE.zip
MEGA MIRROR:A310F_5.1.1_NEE.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice work! Can you do the same for 6.0.1? Since 7 came out I'm stuck there and can't downgrade.
mcpossity said:
Nice work! Can you do the same for 6.0.1? Since 7 came out I'm stuck there and can't downgrade.
Click to expand...
Click to collapse
Hi, thanks.
Since the last MM update, our bootloader got upgraded to binary 3. Same as Nougat.
It should be possible to downgrade with odin using one of the latest released MM firmwares. One that starts with A310FXXU3.
Don't forget to back up data and factory reset before you do, otherwise you'll probably end up in a bootloop problem.
tys0n said:
Since the last MM update, our bootloader got upgraded to binary 3. Same as Nougat.
It should be possible to downgrade with odin using one of the latest released MM firmwares. One that starts with A310FXXU3.
Click to expand...
Click to collapse
Yeah, I know, but I want to downgrade to an earlier version of 6.0.1 which has still the old bootloader with binary 2...
mcpossity said:
Yeah, I know, but I want to downgrade to an earlier version of 6.0.1 which has still the old bootloader with binary 2...
Click to expand...
Click to collapse
Not possible unless you modify the .tar.md5 by removing the .bin files in it, then tar it up and flash in odin.
The secure bootloader (sboot.bin) won't allow the downgrade of itself. Needs to be left at U3.
Modem (modem.bin) must also be left at U3, because downgrade modem to U2 while keeping the U3 bootloader will leave you with unknown network or IMEI loss untill upgraded again.
Same with cm.bin. It needs to be left at U3 afaik.
tys0n said:
Not possible unless you modify the .tar.md5 by removing the .bin files in it, then tar it up and flash in odin.
Click to expand...
Click to collapse
Thank you, that worked!! I'm surprised myself because I had tried it before with only sboot.bin removed and it had failed. Now the flash went through seamlessly.
tys0n said:
I've seen a few questions about downgrading from 6.0.1 to 5.1.1 and that odin won't allow it.
It's because of secure bootloader, that won't allow downgrade of binary version.
I've made a flashable zip for twrp of the latest 5.1.1 released with csc NEE. (because thats my region)
This will leave your current bootloader version and baseband version, compared to the odin file.
I just did some very light debloating of some microsoft crap as far as I can remember. Maybe some google app as well, like hangout.
No root added, no tweaks, just pretty much stock. Edit: Forgot to mention it's deodexed and zipaligned.
Thought I could share it if anyone needs it.
DOWNLOAD:A310F_5.1.1_NEE.zip
View attachment 4166300View attachment 4166301View attachment 4166302
Click to expand...
Click to collapse
Can you do this for A510F? Please?
Help in A7 (SM-A720F ZTO)
tys0n said:
Not possible unless you modify the .tar.md5 by removing the .bin files in it, then tar it up and flash in odin.
The secure bootloader (sboot.bin) won't allow the downgrade of itself. Needs to be left at U3.
Modem (modem.bin) must also be left at U3, because downgrade modem to U2 while keeping the U3 bootloader will leave you with unknown network or IMEI loss untill upgraded again.
Same with cm.bin. It needs to be left at U3 afaik.
Click to expand...
Click to collapse
I need to do this on an SM-A720F, but I do not know. Could someone do it for me? I am willing to even make a donation through Paypal. :good:
To go by Odin.
In this firmware:
ammobile.com/firmwares /galaxy-a7/SM-A720F/ZTO/download /A720FXXU1APLI/123200/
msoaresantos said:
I need to do this on an SM-A720F, but I do not know. Could someone do it for me? I am willing to even make a donation through Paypal. :good:
To go by Odin.
In this firmware:
ammobile.com/firmwares /galaxy-a7/SM-A720F/ZTO/download /A720FXXU1APLI/123200/
Click to expand...
Click to collapse
Hi. Do you need specificly that firmware or you just want to downgrade from Nougat?
If you need to downgrade from N, here's also a newer 6.0.1 for ZTO, A720FXXU2AQFA which I think should work for downgrade.
http://updato.com/firmware-archive-select-model?record=161D5BBD669011E7963AFA163EE8F90B
tys0n said:
Hi. Do you need specificly that firmware or you just want to downgrade from Nougat?
If you need to downgrade from N, here's also a newer 6.0.1 for ZTO, A720FXXU2AQFA which I think should work for downgrade.
I really need the A720FXXU1APLI firmware!
Thanks !
Click to expand...
Click to collapse
can't flash xposed-v86.1-sdk22-arm64 on my A310F, "ROM A310F_5.1.1_NEE"
please help
qazqaz1970 said:
please help
Click to expand...
Click to collapse
Use arm instead of arm64, and use xposed for samsung by wanam :good:
tys0n said:
Use arm instead of arm64, and use xposed for samsung by wanam :good:
Click to expand...
Click to collapse
xposed-v81.0-sdk22-arm-custom-build-by-wanam work perfect
thank's.
tys0n said:
I've seen a few questions about downgrading from 6.0.1 to 5.1.1 and that odin won't allow it.
It's because of secure bootloader, that won't allow downgrade of binary version.
I've made a flashable zip for twrp of the latest 5.1.1 released with csc NEE. (because thats my region)
This will leave your current bootloader version and baseband version, compared to the odin file.
I just did some very light debloating of some microsoft crap as far as I can remember. Maybe some google app as well, like hangout.
No root added, no tweaks, just pretty much stock. Edit: Forgot to mention it's deodexed and zipaligned.
Thought I could share it if anyone needs it.
DOWNLOAD:A310F_5.1.1_NEE.zip
View attachment 4166300View attachment 4166301View attachment 4166302
Click to expand...
Click to collapse
Many thanks for sharing! I've tested this one as I wanted just to take a deeper look at 5.1.1 on A3 2016 (My phone when unboxed immediately started upgrade to 6.0.1 so I did not have much time to play around with 5.1.1). I am quite surprised with the performance. The 5.1.1 is surely a beastie. Unfortunately I've got used to some Nougat features (reply from notifications, centered lockscreen "big" clock, quite powerful doze mode saving a lot of juice from the battery) and decided to go back to 7 which I use currently as a daily driver.
link update
hi guys please link update 50kb/s :crying: :crying: please plase emergency
French ?
A big thank you for your post and your work. If I put in place your NEE file, would I have the firm in French? It's good with TWRP that we put in place?
I do not understand a word of English and have to go through a translator.
Thanks again
menuisier3 said:
A big thank you for your post and your work. If I put in place your NEE file, would I have the firm in French? It's good with TWRP that we put in place?
I do not understand a word of English and have to go through a translator.
Thanks again
Click to expand...
Click to collapse
Hi. Yes, flash it with twrp. French language should be included.
Added mega mirror. AFH seem to have problems lately.
Hi!
Thanks a lot for this stock rom!
The battery life and speed it's better than nougat.
But I have a question, can you make the same stock rom based on 6.0.1?
I don't have a PC to extract a rom from firmware, and I searched a lot a flashable stock 6.0.1.
Sorry for my bad english and thanks again!
help!! help!!
Can you do for the A710f? Please??
Related
Hi, I'm trying to flash my samsung with the new android 4.3 but it keeps
Go back to the original firmware no matter what firmware I flash it with
I've tried 4.0.1 official firmware (which was originally on it)
And the new 4.3
And that happened after I took it to samsung services to solve a problem happened in it
And they flashed it with the EGY firmware
Does anyone know why it keeps going back to that firmware?
And by the way I could root it normally and used it for about 2 weeks
Thank you very much for your help
Sales code : EGY
Bootloader version: I9300XXEMD3
Baseband version: I9300XXEMA5
PDA version : I9300XXEMD3
CSC version : I9300JVEMC1
thank you in advance
How and what are you flashing .
JJEgan said:
How and what are you flashing .
Click to expand...
Click to collapse
Flashing the official firmware I9300XXELL5_I9300OJVELL2_KSA android 4.3
And this supposed to be the official one for my phone
flashing it by Odin3 v3.09
If it reverts to original then either flashed file is faulty user is not following the instructions or phone is damaged .
JJEgan said:
If it reverts to original then either flashed file is faulty user is not following the instructions or phone is damaged .
Click to expand...
Click to collapse
Mmmm, flashed file is faulty no way because I've tried a couple of files
The user is not following instructions no I'm following it
The phone is damaged how it could be?? Like what is the damage?? Because I got the phone recently from samsung services after i had a problem with the imei and the phone works great
Maybe the Rom is not flashing properly. Phone should be "USB Debugging" enabled. Then please make sure you are selecting the md5 file in PDA section of Odin and also make sure that the phone is connected in Download mode (Power+Home+Vol Down - and then press Vol UP from the screen). It will show a blue color in COM section.
~ RazorMC
RazorMC said:
Maybe the Rom is not flashing properly. Phone should be "USB Debugging" enabled. Then please make sure you are selecting the md5 file in PDA section of Odin and also make sure that the phone is connected in Download mode (Power+Home+Vol Down - and then press Vol UP from the screen). It will show a blue color in COM section.
~ RazorMC
Click to expand...
Click to collapse
i did all this and made sure it is done correctly
But when I flash it
It just removes the root
But everything else stays at its
Until I do a factory reset
this is the files i've tried to flash
I9300XXELL5_I9300OJVELL2_I9300XXELKC_HOME.tar.md5 (4.3)
I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5 (4.1.2)
and i've tried the 4.1.2 before
thank you
a7medabdou said:
i did all this and made sure it is done correctly
But when I flash it
It just removes the root
But everything else stays at its
Until I do a factory reset
this is the files i've tried to flash
I9300XXELL5_I9300OJVELL2_I9300XXELKC_HOME.tar.md5 (4.3)
I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5 (4.1.2)
and i've tried the 4.1.2 before
thank you
Click to expand...
Click to collapse
As far as I checked they are both 4.1.2 firmwares so there will be no change. Visit sammobile for the latest i9300 firmware for your country.
~ RazorMC
RazorMC said:
As far as I checked they are both 4.1.2 firmwares so there will be no change. Visit sammobile for the latest i9300 firmware for your country.
~ RazorMC
Click to expand...
Click to collapse
Oh, so weird
Any way I connected my phone to kies and it said that there is an update for it
i'm trying it right now
Thank you very much
BUT WHEN I TRY TO GET THE 4.3 FROM SAMMOBILE PADGE IT RE DIRECT ME TO 4.1.2
ANY WAY UPDATING BY KIES RIGHT NOW
THANK YOU VERY MUCH
a7medabdou said:
The user is not following instructions no I'm following it
There are only three possibles and the one above is the usual suspect .
Have you checked firmware in settings ???
---------- Post added at 05:50 PM ---------- Previous post was at 05:47 PM ----------
a7medabdou said:
The user is not following instructions no I'm following it
There are only three possibles and the one above is the usual suspect .
Have you checked firmware in settings ??? before and after .
Phone should be "USB Debugging" enabled. No thats wrong see faqs and guides .
Click to expand...
Click to collapse
Click to expand...
Click to collapse
JJEgan said:
a7medabdou said:
The user is not following instructions no I'm following it
There are only three possibles and the one above is the usual suspect .
Have you checked firmware in settings ???
Click to expand...
Click to collapse
I FOUND THAT I'M FLASHING THE 4.1.2 AGAIN I THOUGHT IT 4.3 AS THE DOWNLOAD PAGE FROM SAMMOBILE DIRECTED ME THERE AS IT IS 4.3
ANY WAY I CONNECTED IT TO KIES AND IT OFFERED A NEW UPDATE SO I'M GONNA TAKE IT
AND COME BACK HERE AFTER TO TELL YOU IF MY PROBLEM HAS BEEN SOLVED OR NOT
THANK YOU FOR YOUR HELP I APPRECIATE IT
Click to expand...
Click to collapse
I have updated my phone throw Kies but it still 4.1.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can't get the official 4.3 in my country Egypt
Even when I searched in sammobile I only found 4.1.2 eve on the 4.3 official update page it
http://www.sammobile.com/2013/11/04...olling-out-for-samsung-galaxy-s-iii-gt-i9300/
It redirects me throw 4.1.2
i don't know what to do
!!
a7medabdou said:
I have updated my phone throw Kies but it still 4.1.2
I can't get the official 4.3 in my country Egypt
Even when I searched in sammobile I only found 4.1.2 eve on the 4.3 official update page it
http://www.sammobile.com/2013/11/04...olling-out-for-samsung-galaxy-s-iii-gt-i9300/
It redirects me throw 4.1.2
i don't know what to do
!!
Click to expand...
Click to collapse
From that page also you can check it is 4.1.2
I don't know if UAE version will work for you, but you can download from here.
~ RazorMC
RazorMC said:
From that page also you can check it is 4.1.2
I don't know if UAE version will work for you, but you can download from here.
~ RazorMC
Click to expand...
Click to collapse
Thank you for your help
but i'm afraid that it would affect my imei or sn
as i had this problem before i got my phone repaired by samsung services here in Egypt
but i think i will wait till 4.3 realease for my country
but i have a question
i can easly root my phone
and i rooted it
isn't that mean that mjy phone works normaly
and i can flash it ?
thank you again
Root can be flashed but OTA updates may fail .
a7medabdou said:
Thank you for your help
but i'm afraid that it would affect my imei or sn
as i had this problem before i got my phone repaired by samsung services here in Egypt
but i think i will wait till 4.3 realease for my country
but i have a question
i can easly root my phone
and i rooted it
isn't that mean that mjy phone works normaly
and i can flash it ?
thank you again
Click to expand...
Click to collapse
About odin, yes you can flash the firmware and your phone will work normally. Rooted does not matter for odin.
But if you are rooted then OTA update will not happen because Samsung will detect that you modified (rooted) the software.
~ RazorMC
RazorMC said:
About odin, yes you can flash the firmware and your phone will work normally. Rooted does not matter for odin.
But if you are rooted then OTA update will not happen because Samsung will detect that you modified (rooted) the software.
~ RazorMC
Click to expand...
Click to collapse
no i mean someone here said that my phone may be corrupted or something
\isn't the ability to root is sign that my phone is working fine
and about the ota i can replace it with kies or i just use a module to make the phone state normal
a7medabdou said:
no i mean someone here said that my phone may be corrupted or something
\isn't the ability to root is sign that my phone is working fine
and about the ota i can replace it with kies or i just use a module to make the phone state normal
Click to expand...
Click to collapse
Yes, your phone is ok. Maybe there was some confusion before about why firmware was not flashing. But it was same firmware so nothing wrong with your phone.
~ RazorMC
RazorMC said:
Yes, your phone is ok. Maybe there was some confusion before about why firmware was not flashing. But it was same firmware so nothing wrong with your phone.
~ RazorMC
Click to expand...
Click to collapse
thank you bro thank you very much for your help and every one else help here
I did the flashtool route of upgrading to 5.1.1 as I have in the past using this guide http://forum.xda-developers.com/xperia-z2/general/4-4-4-creating-rooted-update-package-t2933155
It goes through optimizing apps, then reboots, and repeats this process. I can get into the regular recovery menu with the options to reboots and factory reset by holding volume down, but can't seem to get into TWRP from ZXDualRecovery so I can restore the backup that I made.
Any help would be appreciated. Just want my tablet back up and running.
Where did u find 5.1.1 for spg561? Sorry for not having an answer
platynumx said:
Where did u find 5.1.1 for spg561? Sorry for not having an answer
Click to expand...
Click to collapse
Xperifirm. I got an email from Sony saying it was available.
Varekai said:
Xperifirm. I got an email from Sony saying it was available.
Click to expand...
Click to collapse
Care to link me?I can't find it anywhere. My tablet won't pull it and the Verizon update software says it's up to date.
May be best to wait. That update borked my tablet, but Xperifirm is software that you use to download it.
I've used xperitool,tried to ota,used verizon/Sony upgrade tool, got the same email from Sony, and Googled the hell out of this with no results. I'm convinced there is no 5.1.1 update for this tablet and it was confused with the 5.0.2 update going from verizon internal testing to official ota. The z3 phone and this tablet shared the build name. I don't believe it. With that in mind I think you flashed phone firmware and that's why you are bootlooping.
platynumx said:
I've used xperitool,tried to ota,used verizon/Sony upgrade tool, got the same email from Sony, and Googled the hell out of this with no results. I'm convinced there is no 5.1.1 update for this tablet and it was confused with the 5.0.2 update going from verizon internal testing to official ota. The z3 phone and this tablet shared the build name. I don't believe it. With that in mind I think you flashed phone firmware and that's why you are bootlooping.
Click to expand...
Click to collapse
No it's there. Spent some time with the tablet today, got it back up and running, and it's on 5.1.1.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Xperifirm finally showed it on my end. Fails flashing the last part. Tablet boots to a screen that says software update failed. Any suggestions?
platynumx said:
Xperifirm finally showed it on my end. Fails flashing the last part. Tablet boots to a screen that says software update failed. Any suggestions?
Click to expand...
Click to collapse
Try re downloading and remaking the FTF, also make sure your on the latest version of Flashtool.
Varekai said:
Try re downloading and remaking the FTF, also make sure your on the latest version of Flashtool.
Click to expand...
Click to collapse
Tried on 3 different pc's using 4 different cables. Same result. Flashed back to the leaked 5.0.2. Guess I'll wait for an ota...
platynumx said:
Tried on 3 different pc's using 4 different cables. Same result. Flashed back to the leaked 5.0.2. Guess I'll wait for an ota...
Click to expand...
Click to collapse
https://www.dropbox.com/s/vuadrd234on6fvr/SGP561_23.4.B.0.319_Verizon.ftf?dl=0
Here's the same FTF I used if you would like to give it a shot.
Thanks for sharing that.
Your welcome. Did it work?
platynumx said:
Thanks for sharing that.
Click to expand...
Click to collapse
OK if your using flashtool to to update then it's likely you are overwriting the custom recovery with the stock one from the ftf so you should flash twrp again after flashing a ota then I would recommend flashing a prerooted firmware from the general section
Varekai said:
Your welcome. Did it work?
Click to expand...
Click to collapse
Yes it did.first try. Thanks again
Varekai said:
https://www.dropbox.com/s/vuadrd234on6fvr/SGP561_23.4.B.0.319_Verizon.ftf?dl=0
Here's the same FTF I used if you would like to give it a shot.
Click to expand...
Click to collapse
Did this file end up working for you? I was on the 5.1.1 and then rooted and later ended up bricking my tablet...the only ftf file I can find is the 5.0.2 internal version and the 4.4.4 kit kat. I've tried making ftf files but whatever I get off xperifirm never shows in the available files box when I'm trying to decrypt. Do you by chance have a stock official 5.1.1 ftf file that is ready to flash? I'm going insane here lol I wish I could make my own files
Yes, and for the user above your post that I shared it for.
Anyone get the bootloader unlocked on the sgp561?
Sent from my SGP561 using XDA-Developers mobile app
We still need to make our own flashable.zip and then we can use the ftf above?
Hi,
just to share my experience on the problem I faced while moving to stock ( I know these are my mistakes and anyone can do this so wanted to share just to save other new users)
I was on one of the custom ROM yesterday but due to lag in camera and slight other bugs (or say due to my requirement), I wanted to go back to stock. I had all the files, TWRP backup but as TWRP doesnt work on Android 8.1 for V10 (except BKL-L04), it was much complicated.
While flashing my stock system.img, I didnt realize that I am on magisk and patched_boot.img rather stock (that was my mistake) and just flashed my system.img and then factory reset in stock recovery. My phone booted fine but then no service for SIM cards, checked in about phone and found that I have lost my IMEI. (no other bugs). My bootloader is still unlocked but FRP lock (I did factory reset remember and I had the google account on earlier custom ROM which I did not delete)..
If you come across this situation, you can boot few times but this will remain the same and factory reset will not help. I was unable to flash TWRP to restore my stock backup (android 8.0, TWRP works on this, right) as my FRP was locked. Even enabled google account and factory reset all but no luck. Then, I made another mistake of relocking the bootloader. Once re-locked, It was in bootloop and only fastboot and erecovery was accessible.
I had no other option but to only download the full file in erecovery and boot. It will be a different file which we do not get on firmware finder, in my case, it was BKL-L09C432B160- FULL file. It took me 4 hours to download the 3GB full file (was in office and was unable to connect to office Wi-Fi, no hotspot issue on iOS12 beta, no 4GB SD card or data card which I normally carry with in bag so burrowed a data card and used my sim and downloaded the 3GB file in 4 hours). Once file was downloaded and flashed, all were fine with IMEI and everything stock.
Just wanted to share this experience so that any other noob or new user do not repeat this and get into all these trouble ( I knew that I will be able to revive anyhow as I am familiar with Huawei/honor phones but it may not be the case all the time with you- its just we need patience with this).
You can share your experience if you come across such so that it will be helpful for others.
I will create a guide as well to get back to stock ROM from custom ROM based on my experience (will skip the dload method as it is already covered and I have not tested that on EMUI 8 - have done it more than 100 times on EMUI 3,4,5) .
Thanks for reading.
I don't think you can download full package from erecovery for Indian model.. it gave me some kind of failure error whenever I tried to download
Rommco05 said:
Im curious how u lost IMEI and FRP lock? I flash couple times system.img and then factory reset in stock recovery without issues. Google account doesnt lock FRP no different if u signed in account or not. It is related to OEM in Developer section. I never delete my account, (when I sell my View10 I also dont delete my account just make FR and another person sign in and have FRP unlocked). Sometimes after flashing/Factory reset switch OEM to disabled
Click to expand...
Click to collapse
I did flash system.img on magisk ramdisk that may be the issue here for imei lost or may be i was on b160 before RR but flashed b130 image, anything. When downloaded b160-full in erecovery, all fixed.
Narasimha12 said:
I don't think you can download full package from erecovery for Indian model.. it gave me some kind of failure error whenever I tried to download
Click to expand...
Click to collapse
If firmware is not available then possibly the error. But this should have it and error may be due to anything else corrupted, just a thought
Rommco05 said:
U use some tool/service for send fw to erecovery?
Click to expand...
Click to collapse
Nope. Via erecovery, it automatically downloals the latest one
Rommco05 said:
Interesting, just only Chines models was able install/download fw over erecovery. This is new! Huawei make some changes I think
Click to expand...
Click to collapse
Nope. I ahd the same behavior on my BLN-L22 Honor 6X. Initially it was China variant but post debranding, It was BLN-L22 and I was able to download the firmware via erecovery. Thats the purpose of erecovery, rescue tool
Rommco05 said:
Hmmm, for me never work erecovery maybe I do something wrong. After 6 yeats I swich from Huawei to OnePlus and life so easy
Click to expand...
Click to collapse
I never got updates on my Honor 5C in 2 years. Yesterday afetr trying for 12-14 hours of all trial, I was able to update to Nougat and 3-4 OTA updates together. It was tedious task.
Just did it. Debranded from EU version to India with VOLTE. will post a detailed guide soon. as usual, noob friendly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Only bug till now is - I can not unlock my bootloader.
remote: check password failed
shashank1320 said:
Just did it. Debranded from EU version to India with VOLTE. will post a detailed guide soon. as usual, noob friendly.
Click to expand...
Click to collapse
Can the Indian variant be rebranded to the US model?
mondalakash said:
Can the Indian variant be rebranded to the US model?
Click to expand...
Click to collapse
Yes. Need oeminfo and custom bin file. Someone on US version need to share both. I will rest.
shashank1320 said:
Yes. Need oeminfo and custom bin file. Someone on US version need to share both. I will rest.
Click to expand...
Click to collapse
OK waiting for your guide.... So anyone with an US model and twrp can share the required files?
mondalakash said:
OK waiting for your guide.... So anyone with an US model and twrp can share the required files?
Click to expand...
Click to collapse
Yes. I will post that as well.
mondalakash said:
OK waiting for your guide.... So anyone with an US model and twrp can share the required files?
Click to expand...
Click to collapse
Any issue with Indian variant or specific reason if i may ask.
shashank1320 said:
Any issue with Indian variant or specific reason if i may ask.
Click to expand...
Click to collapse
Can't flash roms majority roms support only bkl l04
---------- Post added at 04:02 PM ---------- Previous post was at 03:58 PM ----------
And I don't use volte
mondalakash said:
Can't flash roms majority roms support only bkl l04
Click to expand...
Click to collapse
No thats not true. As far as i seen, official twrp support Android 8.1 and that's for L04 only. But do support other devices with Android 8.
Openkirin ROMs does not support twrp. Which ROM are you trying
shashank1320 said:
No thats not true. As far as i seen, official twrp support Android 8.1 and that's for L04 only. But do support other devices with Android 8.
Openkirin ROMs does not support twrp. Which ROM are you trying
Click to expand...
Click to collapse
Omni du aoscp
Oeminfo can be backed up in twrp or manually copy the file and custom bin under /data to be backed up manually.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP RECOVERY FOR REALME 6/7/Narzo 30
RUI 2.0 ANDROID 11
by albatron34000
Build Type: test - unofficial
Build notes:
- This release has been tested only on Realme7, Narzo 30
Install:
- Flash with fastboot (no vbmeta flash needed)
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot recovery.
Credits :
- @HemanthJabalpuri, @dude_exe : for helping to build dt and build recovery.
- @pero_AF : for testing and reports.
for bugs : tell me.
Download : https://drive.google.com/file/d/1kRW11lYJJzSsOVNebf6eEb4c7rNuvtFo/view?usp=sharing
Link is borken, It says file expired
worked bro
This works too for RMX2151 - RUI 1.0 - A10?
Answer: Yes.
this is better TWRP unofficial build from Gofaraway. decryption works, not laggy
telegram link: https://t.me/realme_6_gofaraway/34782
immns said:
this is better TWRP unofficial build from Gofaraway. decryption works, not laggy
telegram link: https://t.me/realme_6_gofaraway/34782
Click to expand...
Click to collapse
when i try booting it, the phone just hangs and reboots into system after a while
jakaco said:
when i try booting it, the phone just hangs and reboots into system after a while
Click to expand...
Click to collapse
what device are u using? what method did u use for entering recovery? volume down + power won't work anymore on rui2 please use reboot recovery or some third party rebooter app on playstore. I can confirm that file is working on my Realme 7 rmx2151 runing RealmeUI 2.0 C.15 (see attachment, its fresh downloaded from xda, i guess it's not corrupted)
immns said:
what device are u using? what method did u use for entering recovery? volume down + power won't work anymore on rui2 please use reboot recovery or some third party rebooter app on playstore. I can confirm that file is working on my Realme 7 rmx2151 runing RealmeUI 2.0 C.15 (see attachment, its fresh downloaded from xda, i guess it's not corrupted)
Click to expand...
Click to collapse
ohh i thought it would work on rui 1.0 too, do i have to flash stock and update to rui 2.0?
jakaco said:
ohh i thought it would work on rui 1.0 too, do i have to flash stock and update to rui 2.0?
Click to expand...
Click to collapse
oh yes of course. then you can download twrp from it's website. there's official build for realme ui 1 good luck
immns said:
oh yes of course. then you can download twrp from it's website. there's official build for realme ui 1 good luck
Click to expand...
Click to collapse
i flashed rui 1.0 how do i update it to rui 2.0 theres no update in the settings
jakaco said:
i flashed rui 1.0 how do i update it to rui 2.0 theres no update in the settings
Click to expand...
Click to collapse
from my experience simply clear data and cache from com.oppo.ota or changing software region will fix that. but you have to use stock recovery for upgrade i believe
Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed.... original thread
Click to expand...
Click to collapse
immns said:
from my experience simply clear data and cache from com.oppo.ota or changing software region will fix that. but you have to use stock recovery for upgrade i believe
Click to expand...
Click to collapse
which region should i set?
jakaco said:
which region should i set?
Click to expand...
Click to collapse
it depends. first try your own region then check whether it give you update or not. try india region if the first one fail
immns said:
it depends. first try your own region then check whether it give you update or not. try india region if the first one fail
Click to expand...
Click to collapse
im trying to update to a91 but the updater crashes really soon and doesnt update
jakaco said:
im trying to update to a91 but the updater crashes really soon and doesnt update
Click to expand...
Click to collapse
did u use stock recovery or twrp? i guess twrp on rui1 can't update ota, so you have to use stock recovery. there's also ofp file for a91 out there that you can decrypt and flash it with spflashtool.
immns said:
did u use stock recovery or twrp? i guess twrp on rui1 can't update ota, so you have to use stock recovery. there's also ofp file for a91 out there that you can decrypt and flash it with spflashtool.
Click to expand...
Click to collapse
i successfully updated to a91 but theres still no android 11 update, i also relocked my bootloader
jakaco said:
i successfully updated to a91 but theres still no android 11 update, i also relocked my bootloader
Click to expand...
Click to collapse
just wait for awhile. or change the region again. i think locked or unlocked wont affect software update on this phone, my phone bootloader unlocked since a.71 A10 and now updated to c.15 A11.
immns said:
just wait for awhile. or change the region again. i think locked or unlocked wont affect software update on this phone, my phone bootloader unlocked since a.71 A10 and now updated to c.15 A11.
Click to expand...
Click to collapse
i unlocked my bootloader and it seems like my phone changed back to rmx2155 with the bootloader unlocked, is this significant?, i also changed the region to signapore ex since people seemed to have success with it
jakaco said:
i unlocked my bootloader and it seems like my phone changed back to rmx2155 with the bootloader unlocked, is this significant?, i also changed the region to signapore ex since people seemed to have success with it
Click to expand...
Click to collapse
i believe rmx2155 are europe only, so canging to Singapore region will not work. try other region that still in Europe. or.... if everything seems fail. just flash your phone with spflashtool. here's link for rmx2155 A11 c.15
immns said:
i believe rmx2155 are europe only, so canging to Singapore region will not work. try other region that still in Europe. or.... if everything seems fail. just flash your phone with spflashtool. here's link for rmx2155 A11 c.15
Click to expand...
Click to collapse
i dont know what happened but my region is set to singapore (i even have the theme store) the bootloader is unlocked (which is not possible on rxm2155) im gonna try some stuff with spflashtool
Hello everyone.
I bought a japanese Xperia 1 III (Softbank version A101SO) with Android 12 and I've searched for the 13 update but it turns out Softbank didn't release Android 13 on this phone yet.
So I decided to flash the KDDI version to it (with newflasher) and it worked.
But the problem is I got a very weak signal, a battery drain and the 4G rarely appears (always H or H+)
I tried to come back to the old original firmware but the phone won't boot after the flashing process (rollback protection)
The phone has a locked bootloader and it says it can't be unlocked so I wonder if you have a solution for me because I lost all hope right know.
If I can just go back to its original firmware (Android 12 from Softbank) that's all that I need right know.
Thak you for your answers.
Unless you unlock your bootloader, otherwise, you cannot go back to Android 12 again. If your phone's config name 'Bootloader unlock allow' is No, then you have to stick around with KDDI Android 13 fw.
FiDra said:
Unless you unlock your bootloader, otherwise, you cannot go back to Android 12 again. If your phone's config name 'Bootloader unlock allow' is No, then you have to stick around with KDDI Android 13 fw.
Click to expand...
Click to collapse
Thanks for your reply! I'll have to stick with it then...
But can I flash the Softbank modem to it to have a better signal coverage?
I think cross flashing is okay but you need to do some search to make sure you flash all needed files to prevent boot loop.
FiDra said:
I think cross flashing is okay but you need to do some search to make sure you flash all needed files to prevent boot loop.
Click to expand...
Click to collapse
crossflashing works but the problem is the Signal and the battery drain.
is there a way to flash other modem files to the phone?
Try newflasher, you can search the forum for the guide.
FiDra said:
Try newflasher, you can search the forum for the guide.
Click to expand...
Click to collapse
Newflasher is the tool to flash the roms.
I know how to use it since I've crossflashed my Xperia 1 III with another region FW using it.
My question is: is there a way to flash different modem files (and other important files) to the phone with a different region rom to fix the signal and battery drain issues?
Samuël_Fab said:
Newflasher is the tool to flash the roms.
I know how to use it since I've crossflashed my Xperia 1 III with another region FW using it.
My question is: is there a way to flash different modem files (and other important files) to the phone with a different region rom to fix the signal and battery drain issues?
Click to expand...
Click to collapse
Yes just keep the .Sin files that you fish to flash and remove the rest from the rom folder. And make sure when prompted by Newflasher to "keep user data".
bentree said:
Yes just keep the .Sin files that you fish to flash and remove the rest from the rom folder. And make sure when prompted by Newflasher to "keep user data".
Click to expand...
Click to collapse
ohh! thanks for your tip!
I want to ask you:
do you know the name of the modem files that control the network?
Samuël_Fab said:
ohh! thanks for your tip!
I want to ask you:
do you know the name of the modem files that control the network?
Click to expand...
Click to collapse
Modem.Sin is the file you are after.
bentree said:
Modem.Sin is the file you are after.
Click to expand...
Click to collapse
So I've successfully flashed the modem sin file but there's a problem with the camera.
It refuses to launch and the Telephoto lenses are moving all the time (with the noise of the lens moving).
But the signal is back at 4G.
Samuël_Fab said:
So I've successfully flashed the modem sin file but there's a problem with the camera.
It refuses to launch and the Telephoto lenses are moving all the time (with the noise of the lens moving).
But the signal is back at 4G.
Click to expand...
Click to collapse
no idea with that one... sorry
bentree said:
no idea with that one... sorry
Click to expand...
Click to collapse
I guess flashing it with other modem sin files don't resolve the issue.
I need to wait for the Softbank Android 13 (if it will be released one day...)
Thanks to you and people on this post, I've been able to flash fw 61.1.E.5.215 into my A101SO and fix mobile connection and camera by flash .sin file from A101SO android 12 fw. If you still struggle with the camera, let me know. I've seen improvement with battery life and mobile signal, the only let down is netflix wont install from playstore nor playback at full fidelity if I install with apk
Samuël_Fab said:
I guess flashing it with other modem sin files don't resolve the issue.
I need to wait for the Softbank Android 13 (if it will be released one day...)
Click to expand...
Click to collapse
Bachtran24 said:
Thanks to you and people on this post, I've been able to flash fw 61.1.E.5.215 into my A101SO and fix mobile connection and camera by flash .sin file from A101SO android 12 fw. If you still struggle with the camera, let me know. I've seen improvement with battery life and mobile signal, the only let down is netflix wont install from playstore nor playback at full fidelity if I install with apk
Click to expand...
Click to collapse
what file did you flash for the Camera?
Ainz_Ooal_Gown said:
what file did you flash for the Camera?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After I succesfully flashed a bootable fw (XQ-BC72_Customized SEA_61.2.A.0.447 for me), I flash these .sin files from A101SO_SoftBank JP_61.1.E.5.215 right after. The camera problem only rise if you also flash modem_X-FLASH-ALL-4BA8.sin
Bachtran24 said:
View attachment 5922171
After I succesfully flashed a bootable fw (XQ-BC72_Customized SEA_61.2.A.0.447 for me), I flash these .sin files from A101SO_SoftBank JP_61.1.E.5.215 right after. The camera problem only rise if you also flash modem_X-FLASH-ALL-4BA8.sin
Click to expand...
Click to collapse
Hi @Bachtran24 if i understood you correctly then you have installed a Dual XQ-BC72 to your single SIM A101so version and then flashed the modem files and it worked for you?.
Can you please exactly tell which modem files you flashed? in the ROM folder there are 3 modem files.sin.
When you flashed modem.sin filers which ROM folder did you use BC-72 or A101so.
I have the same issues i have updated to global Dual ROM and now my A101so is not getting any signals. looking for your help
crazycolor786 said:
Hi @Bachtran24 if i understood you correctly then you have installed a Dual XQ-BC72 to your single SIM A101so version and then flashed the modem files and it worked for you?.
Can you please exactly tell which modem files you flashed? in the ROM folder there are 3 modem files.sin.
When you flashed modem.sin filers which ROM folder did you use BC-72 or A101so.
I have the same issues i have updated to global Dual ROM and now my A101so is not getting any signals. looking for your help
Click to expand...
Click to collapse
Did you see the picture, just flash those 4 from A101SO_SoftBank JP_61.1.E.5.215 folder, delete other. Reply if you cant see the pic, i'll put it in context
Bachtran24 said:
Did you see the picture, just flash those 4 from A101SO_SoftBank JP_61.1.E.5.215 folder, delete other. Reply if you cant see the pic, i'll put it in context
Click to expand...
Click to collapse
thank you for your reply. i can see the picture and got the answer that i should use A101SO folder for secondary flashing. thanks!