Samsung galaxy ace 3 gt-s7270 stuck on samsung logo - Android Q&A, Help & Troubleshooting

Good day, so my phone just restarted then stuck itself in the samsung logo, at first it was running fine for about two days. My current firmware is the stock ROM and it is rooted. Then I tried to flash again the stock rom but it didnt solved the problem, I noticed that even though I flash the stock ROM the current bin: Samsung Official and the System Status: Custom. I find it weird that the system status is custom please help any kind of suggestions will do.
The things that I have done:
-I am on custom ROM before I flashed the stock ROM
-I've flash the stock ROM and rooted it via CWM
-Tried to troubleshoot it myself like reflashing the stock ROM but didnt work.
-Tried to wipe data/factory reset, wipe cache
-Tried to install cwm and wipe dalvik cache, wipe cache partition, wipe data/factory reset
-Tried to format /system

Related

[Q] Help with bootlooping Galaxy Player 4.0

Followed instructions to flash KlassicRom and am now bootlooping.
Installed Steve's Kernel and booted into CWM where I made a backup.
Then back to odin to install KlassicRom R5 - no errors but on reboot just bootlooped.
After waiting 15 minutes with bootlooping, I booted into CWM to restore. Restore indicated success but on reboot, now just get Samsung boot screen with Steve's android guy in the corner. Stuck on boot.
I can still reboot into CWM and Odin recognizes the player when in download mode, so I'm hoping it's recoverable.
Anyone available to guide?
Thanks in advance for any help!
DCoy
Boot into CWM and
wipe cache
Factory Reset
go to advance and Wipe Dalvick Cache
then exit CWM and reboot.
Tried the wipes before. Did so again.
No errors reported with Wipe Cache
No errors reported with Factory Reset
Wipe Dalvik Cache reports:
Dalvik Cache wiped.
E:unknown volume for path [/sd-ext]
Reboot hangs at Steve's Android guy and Samsung again.
R5 don't work with steve's kernel. It only works with klin kernel or terrasilent.
Sent from my YP-G1 using xda premium
zaclimon said:
R5 don't work with steve's kernel. It only works with klin kernel or terrasilent.
Sent from my YP-G1 using xda premium
Click to expand...
Click to collapse
Downloaded and Odin Flashed R3
Odin reported PASS
on reboot, bootlooping again.
Booted into CWM and Wiped Cache, Factory Reset, and Wiped Dalvik, then reboot.
Bootlooping still.
Same error messages as before when boot hung:
No errors reported with Wipe Cache
No errors reported with Factory Reset
Wipe Dalvik Cache reports:
Dalvik Cache wiped.
E:unknown volume for path [/sd-ext]
Then bootlooping.
US or international, if US there is a stock but rooted ROM on here somewhere (not the full restore using heimdall), i'll look for it later that you can use to flash back with odin then boot into STOCK recovery and wipe data and factory reset that is what got me out of the bootloops when I first started flashing.
here is the link if your running the US model http://forum.xda-developers.com/showthread.php?t=1512331&highlight=stock+rooted+4+0
Downloaded the stock rom. Odin flashed. Booted into stock recovery and did factory reset/wipe.
Rebooted to joy. Thanks!
Might wait a bit before trying to flash the custom rom again.
DavidCoy said:
Downloaded the stock rom. Odin flashed. Booted into stock recovery and did factory reset/wipe.
Rebooted to joy. Thanks!
Might wait a bit before trying to flash the custom rom again.
Click to expand...
Click to collapse
Flash the terrasilent kernel and use that version of CWM to make a backup, its a much newer version and backs up things the older misses, also don't have the USB cable connected to the player when your in CWM thats what seamed to throw me into the bootloop, As long as you stick to Klins ROMs only (not using any of those CM7's or anything based off CM7) what you just experienced and solved with the "stock" ROM flash is the worst case scenario when flashing only variations of Klin's ROM with Odin.

[Q] Inquiry i9300 about reverting and recovery and stuff

ok I went to cwm mode(power+vol up+ Home) and wiped the
Factory Reset/Wipe Data
Wipe Cache Partition
and finally wiped dalvik cache
now my phone reboots to stock but SuperSU and CWM app still there. Does that mean that my phone is still rooted? I also got Siyah kernel. Im using 4.1.2 firmware
You must flash stock ROM via Odin if you want to have stock recovery and no root

[Q] Samsung galaxy s3 neo i9301i stuck on Samsung Logo after flashing stock ROM

Help ! I Flashed CM12 and it worked good , but after some days i wanted to go back to stock ROM (KitKat 4.4.2) i tried to flash it with Odin3 everything went well .. i wiped data/factory reset , wiped Cache partition , wiped dalvik cache but im still stuck at Samsung logo Help Me pleasee
Bassel Atef said:
Help ! I Flashed CM12 and it worked good , but after some days i wanted to go back to stock ROM (KitKat 4.4.2) i tried to flash it with Odin3 everything went well .. i wiped data/factory reset , wiped Cache partition , wiped dalvik cache but im still stuck at Samsung logo Help Me pleasee
Click to expand...
Click to collapse
don't flash odin stock package over custom rom directly. do wip data/factory reset before flashing odin rom. the first boot will take several minutes so be patient.
don't forget to use last odin version 3.09 or 3.10
I Did and i formated my internal storge before using Odin3 and wiped data / factory reset and wiped Cache Partition and Dalvik Cache before and after using Odin3 but still stuck at Samsung logo help me please
Bassel Atef said:
I Did and i formated my internal storge before using Odin3 and wiped data / factory reset and wiped Cache Partition and Dalvik Cache before and after using Odin3 but still stuck at Samsung logo help me please
Click to expand...
Click to collapse
are you sur that you flash the correct firmeware. i think there is several galaxy s3 neo models. so cheek if it is correct firmeware. or just maybe your firmeware that you flash is damaged.
also you can cheek " nand erase all " option in odin . after flash is complette go to recovery and wip cache an factory reset (compulsory).

i9300 samsung logo loop after each flashing

Hi everybody, I have a serious problem with flashing my i9300. I tried flash stock rom 4.1.2 by several methods (Kies, Odin 3.07) but nothing worked. Each flashing procedure runs corectly, but after reboot occurs samsung logo loop unless I remove the batery. I can get into download mode or recowery mode, I tried wipe reset, wipe cache, wipe dalvik cache but nothing is worked. Thx for response guys.
Try 4.3 stock rom. I flashed via Odin and factory reset via recovery mode, and it works!
Thx It works.
Get the stock ROM from:
http://samsung-updates.com/device/?id=GT-I9300
Yes...it's work.
Thank you very much.

Unable to wipe data in recovery mode Samsung galaxy 10.1

Before I flashed twrp,l tried doinga hard reset through stock recovery. I wiped data and cache but after rebooting my personal data was left untouched. I flashed twrp and got rooted. I tried to flash custom ROM. After deleting cache,dalvik, system, I tried to wipe data it says fail. I tried to go ahead to install the custom ROM,it failed too. Please help.

Categories

Resources