Paranoid Android 7.2.1 - AOSPA - Pixel XL - Google Pixel XL ROMs, Kernels, Recoveries, & Other

Paranoid Android 7.2.1 - AOSPA - Pixel XL - Google Pixel XL ROMs, Kernels, Recoveries, & Other

M new to XDA. Can any one tell me flashing guide for this rom.

Wow Paranoid Android is here

Runs great. Is there any chance of adding option to adjust navbar height?

As this is just a direct copy and paste from the op3/t sub your gonna need new install instructions for the pixel as it's totally different to any other device
jiexi said:
Flash-all May to slot A
Switch to slot B
Flash-all May to slot B
Switch to slot A
Flash April bootloader to slot A
Switch to slot B
Flash April bootloader to slot B
Switch to slot A
Fastboot boot TWRP RC1
Wipe Factory Reset
Flash ROM
Flash TWRP RC1
Reboot System, Let it get to the setup screen
Restart to Recovery
Flash SuperSu v2.82
Reboot System, Let it get to the setup screen
Flash EX
Reboot System, Let it get to the setup screen
Set your **** up
Click to expand...
Click to collapse

Have always loved this ROM. Any chance on flashing instructions. Thanks

buzz11699 said:
Have always loved this ROM. Any chance on flashing instructions. Thanks
Click to expand...
Click to collapse
Probably the same as any other rom here that doesn't come with Gapps.
Reboot to TWRP
Factory reset
Flash rom
Flash TWRP (flash VBS if on May BL)
Reboot recovery
Flash Gapps
Flash Vendor (if you need to)
Flash SU/Magisk
Flash TWRP (flash VBS if on May BL)
Reboot to System

Thx for bringing PA back.
Runs damn smooth for a first release.
Some off my key features are missing, but knew that. Maybe they come in time.
Am I blind or why I can't find any klick to turn on pie. Just find the pie themer.

mikaole said:
Thx for bringing PA back.
Runs damn smooth for a first release.
Some off my key features are missing, but knew that. Maybe they come in time.
Am I blind or why I can't find any klick to turn on pie. Just find the pie themer.
Click to expand...
Click to collapse
I can't seem to get this to boot. Did you just use the normal flashing instructions for any other May Pixel ROM?

First I am still on April bootloader.
Never flashed may stock.
Always flashing like this:
Boot to twrp
Wipe factory reset
Advanced wipe cache and system
In twrp reboot
Reboot to the not active slot
There will be a error message that you don't have system installed
Hold vol- and reboot
You are going straight to bootloader on the not active slot
Reboot from there to recovery twrp
In twrp flash rom and twrp
Hold vol- and reboot
From bootloader reboot recovery twrp
In twrp flash image O vendor as vendor
Then flash gapps. I used beans
Reboot
Once in system
Reboot to twrp and flash su
Because I never was on may image I still use sr3
Reboot
Be happy

mikaole said:
First I am still on April bootloader.
Never flashed may stock.
Always flashing like this:
Boot to twrp
Wipe factory reset
Advanced wipe cache and system
In twrp reboot
Reboot to the not active slot
There will be a error message that you don't have system installed
Hold vol- and reboot
You are going straight to bootloader on the not active slot
Reboot from there to recovery twrp
In twrp flash rom and twrp
Hold vol- and reboot
From bootloader reboot recovery twrp
In twrp flash image O vendor as vendor
Then flash gapps. I used beans
Reboot
Once in system
Reboot to twrp and flash su
Because I never was on may image I still use sr3
Reboot
Be happy
Click to expand...
Click to collapse
Why are you holding down volume and rebooting?
Just go to the reboot menu and select recovery, you reboot into recovery..
Im confused

Sometimes it doesn't worked for me. Don't know why.
So I got used to it.
And I didn't mentioned it because I think it's not necessary anymore.
I still Wipe 3 times because I am used to it from years before with clockwork

mikaole said:
Thx for bringing PA back.
Runs damn smooth for a first release.
Some off my key features are missing, but knew that. Maybe they come in time.
Am I blind or why I can't find any klick to turn on pie. Just find the pie themer.
Click to expand...
Click to collapse
You have to enable Immersive Mode on the quick settings toolbar.

mikaole said:
Am I blind or why I can't find any klick to turn on pie. Just find the pie themer.
Click to expand...
Click to collapse
It's actually a quick toggle up in the notification bar. Just turn on immersive mode and it should enable.
edit-oops im too slow

Google camera crashing...anyone knows some kind of fix?

Has anyone tested WiFi calling and VoLTE?
Great to see PA back, your contributions to the community have been very enriching and looking forward to seeing that continue now that the team is active again. Keep up the good work guys!

killerdude7777 said:
Google camera crashing...anyone knows some kind of fix?
Click to expand...
Click to collapse
Flash beans gapps from last month. Someone else said that worked. Or if you want to wait I will be flashing this rom here shortly with the mentioned gapps. I can report back

killerdude7777 said:
Google camera crashing...anyone knows some kind of fix?
Click to expand...
Click to collapse
I used aroma open gapps and left stock camera and it works.

killerdude7777 said:
Google camera crashing...anyone knows some kind of fix?
Click to expand...
Click to collapse
Beans gapps camera works fine

I have installed beans gapps. Can't sign in with my google account, having an error for Cannot connect with Google servers. Some people suggested 2 step verification was the problem. Turned it off and cleared the data for google apps. Still can't connect. Any suggestions ?

Related

[Discontinued][ROM][9.0.0_R8][PIE] PixysOS [BACON][OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Pixys is a butter smooth Android aftermarket firmware. We handpicked the best features around and are adding our own juice into it.
Get ready to taste the unique features it brings with itself.
We aim to deliver an experience with original ideas and features along with the useful things the community is accustomed to.
@Subinsmani
@rahul9999
@@ki
@kvijaya
@YashGarg10
Support Me if you like my work
[SIZE=+1]Got an issue or suggestion? Reach us at[/SIZE]
Telegram: https://telegram.me/pixysos_chat
Battery icon customization
- Portrait, Circle, Dotted circle, Text & hidden battery icon styles
- Hidden, Next to the icon & inside the icon battery % styles
- New charging animation Added to Battery Manager from Pixel Devices
Display settings customization
- Font size customization according to percentage
- Toast App Icon (Toggable)
- Lockscreen Charging Info (Toggable)
- DTS(Status Bar) (Toggable)
- 21 Accents Added
- Dark Theme Added
- Black Theme Added
Sound settings customization
- Short Cut to prevet Ring added(Pressing power + volume up)
- Screnshot Sound (Toggable)
- Charging Vibration (Toggable)
Security settings customization
- Auto Face Unlock (Toggable)
- fingerprint Authentication Viberation (Toggable)
- DTS on Lockscreen (Toggable)
Button settings customization
- Volume rocker playback control (Toggable)
- Volume rocker wake (Toggable)
- Volume key cursor control
- Clear All Button
- Navigation bar (Toggable)
- Navigation bar customization
Miscellaneous
- Pixel ringtones
- Powermenu customization
- Battery light customization
- Lockscreen shortcuts
- New Wallpaper Credits to @kvijaya
- OTA Updates support
Pixys: PixysOS
Pixys Device Sources: PixysOSDevices
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 27.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
The ROM should contain everything you need to enjoy Android. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
- Backup your personal data (Important)
- Download the ROM and GApps and transfer them to your device.
- Boot to recovery (TWRP recommended).
- Wipe the System, Cache, Data and ART/Dalvik cache.
- Flash the ROM + Gapps Zipfile.
- Flash the root solution of your choice (optional).
- Reboot your device.
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every update (= ROM Update)
Currently Supported Root Solutions:
Magisk stable
Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the device, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine
ROM: Download
GApps: OpenGApps
OP gestures are not working
HW remap and related things are still broken
- Google for AOSP
- AOSCP
- Dirty Unicorns
- Bootleggers
- Pixel experience
- AOSP extended
- LineageOS
- Nitrogen Os
- AICP & POSP Team for thread template idea
- Also many pro devs who all help us to bring this rom to you..
- Please let us know if we forgot to mention your name in credits..
XDA:DevDB Information
Contributors:
(mention all the devs who have contributed to your device tree, kernel, vendor, etc,
only mention the main ones though, probably the top four or so, otherwise this list will be a mile long unless if you're a huge kanger xD)
Kernel source:
https://github.com/PotatoProject
ROM OS Version: 9.x.x Pie
ROM Kernel: Linux x.x.y (EG: 3.18.y)
Based On: AOSP
Version Information
Status: Beta/Stable
Current Version: v2.x
Release Date: 09-10-2018

First.. any screen shots of ROM

tell us more about its features!

fahirrulez said:
First.. any screen shots of ROM
Click to expand...
Click to collapse
here are 2, to lure

agstn.tanmay said:
tell us more about its features!
Click to expand...
Click to collapse
Just read the OP. -> Pure AOSP until now, no extra features.

chris_stan said:
here are 2, to lure
Click to expand...
Click to collapse
is it really available???is adaptive battery is also available?

agstn.tanmay said:
is it really available???is adaptive battery is also available?
Click to expand...
Click to collapse
Good evening,
There must be a gap between the last O and one of the first P
My opinion is that you have to try, it rewards and encourages the person who has spent a lot of time trying to give the best of himself in this realization
So my answer, try

Just installed this ROM. Big up to the devs for bringing Pie to our bacon )
I am having trouble with the build.prop patching zip though.
Never mind, you can disable the software buttons by addin the line "qemu.hw.mainkeys=1" to build.prop.

when flashing the rom it is flashing with gapps pkg too which is giving me error in installation!

Works great. Is there a way to use the navigation pill?

Something in this ROM, (or actually @Agent_fabulous ROM) is causing abysmal Wi-Fi speeds.

Ruggerxpunk said:
Something in this ROM, (or actually @Agent_fabulous ROM) is causing abysmal Wi-Fi speeds.
Click to expand...
Click to collapse
Working fine in both Mine and posp

agstn.tanmay said:
when flashing the rom it is flashing with gapps pkg too which is giving me error in installation!
Click to expand...
Click to collapse
Don't flash ROM with gapps u may face fc and giving u error.... What error?

loperaster09 said:
Just installed this ROM. Big up to the devs for bringing Pie to our bacon )
I am having trouble with the build.prop patching zip though.
Never mind, you can disable the software buttons by addin the line "qemu.hw.mainkeys=1" to build.prop.
Click to expand...
Click to collapse
Cool.... Build.prop patching means that pixel theme one? What problem u faced?

agstn.tanmay said:
is it really available???is adaptive battery is also available?
Click to expand...
Click to collapse
See adaptive battery is a pixel exclusive feature but can be get by an overlay ... I'll add that animation too but for now adaptive battery is under Battery management in Battery section... Only diff is animation isn't present here

beingmishra said:
Cool.... Build.prop patching means that pixel theme one? What problem u faced?
Click to expand...
Click to collapse
One of the two supplied zips gave a message while flashing that it's use is to disable the software keys. That didn't work, so I disabled it manually in build.prop. Not a big issue. Have to say though, this ROM is running smoothly with no major battery drainage

Couldn't get root access even with Magisk 16.7 or SuperSU. Any luck for others?

Ruggerxpunk said:
Something in this ROM, (or actually @Agent_fabulous ROM) is causing abysmal Wi-Fi speeds.
Click to expand...
Click to collapse
When I'm near the WiFi router and signal is decent, speeds are up to par with Oreo, but when the signal drops WiFi is indeed very unstable and slow.

Open Gapps? Which one? Platform? There is no for Android 9

any screenshots share please thanks

[ROM][OP5T][9.0.0_r46] Candy9.0 Stable[OFFICIAL][SUBS][EOL]

See Post #3 for a list of what is working or not if you have concerns. Thanks!
ROM:
Candy-dumpling-9.0.Beta.1.0-OFFICIAL-20181109-1657.zip
Main ROM folder: AndroidFileHost Folder
GAPPS
NOTE: You need to use GApps that are compatible with your Android version (9.0,etc.) and platform (ARM, ARM64, etc.).
Open GApps (Smallest ARM package is recommended)
RECOVERY
TWRP v3.2.3.0 or newer
FIRMWARE + RADIO - FLASHABLES
[FIRMWARE/MODEM] Download Firmware

FAQ
What's not working:
You tell us... but, "Logs or it didn't happen!"

Download links are coming soon

Good to see a little of sweetness here, good work. :highfive:

Candy pie hmm ??

Link is up in Post 2

Sweet. :fingers-crossed::fingers-crossed::fingers-crossed:

Excellent work @NoSpamDan

wingedpanther said:
Excellent work @NoSpamDan
Click to expand...
Click to collapse
Thanks and nice to see you here... :highfive:

Candy Pie! I'm all set up and running smoothly with no issues so far, thanks for the rom. :good: I'm hoping some more customizations will be added soon. Is there an option for swapping the nav buttons that I am missing?? I can't find it if there is.....

mad4some said:
Candy Pie! I'm all set up and running smoothly with no issues so far, thanks for the rom. :good: I'm hoping some more customizations will be added soon. Is there an option for swapping the nav buttons that I am missing?? I can't find it if there is.....
Click to expand...
Click to collapse
Software keys is almost ready, with stock navbar, stock gesture navbar and SmartNav (SmartBar/Fling/Pulse). Hardware keys are next. I lost my SOGs with SmartNav but I think I know why... lol fun, fun

NoSpamDan said:
Software keys is almost ready, with stock navbar, stock gesture navbar and SmartNav (SmartBar/Fling/Pulse). Hardware keys are next. I lost my SOGs with SmartNav but I think I know why... lol fun, fun
Click to expand...
Click to collapse
That's why they call it "building" roms! It's very smooth and fluid, it'll be nice to see the progression. I like SmartBar and haven't really adopted "the pill" yet, so that will be a great add! Cheers

How do you get a auto face unlock?
Is that face unlock in oos or like the trusted face?

Lirchu said:
How do you get a auto face unlock?
Is that face unlock in oos or like the trusted face?
Click to expand...
Click to collapse
Same thing lol. Make sure you have a PIN or some device locking set up, then you need to allow it by going to Settings > Security > Advanced > Trust Agents and enabling Smart Lock (Google). Then, face unlock becomes available.

Hey there!
I know that this may sound like a silly question but I have been out of the flashing game for a couple of years now so I am a bit cautious. I am on OOS 5.1.7 (no root or custom recovery yet), after flashing twrp will this be a problem when flashing the rom?
Additionally can I also flash SuperSU instead of magisk for root access?
Thank you

shinn82 said:
Hey there!
I know that this may sound like a silly question but I have been out of the flashing game for a couple of years now so I am a bit cautious. I am on OOS 5.1.7 (no root or custom recovery yet), after flashing twrp will this be a problem when flashing the rom?
Additionally can I also flash SuperSU instead of magisk for root access?
Thank you
Click to expand...
Click to collapse
Uhhhh... lol Are you bootloader unlocked? If not, it will wipe your device. I'd suggest reading up on the process before diving in.
As far as SuperSU... I wouldn't. It was sold off to some Chinese company a while back... Magisk 17.3 is available and recommended if you want to root. You can use the Magisk app to not only manage root access but to hide root from certain apps (Android Pay, for example).

This ROM is nearly flawless. VoLTE works, SafetyNet pass with Magisk. There's some minor stutter here and there and for some reason I can't see Trusted Face in Smart Lock even after installing a full gApps package.
Also, is there a custom kernel available to use with Pie?

Hi! Nice Rom, I have a bug with volume buttons. Sometimes when I press up button or down button only change 1 value and when I press again change -1. I don't know why. Best regards

NoSpamDan said:
Uhhhh... lol Are you bootloader unlocked? If not, it will wipe your device. I'd suggest reading up on the process before diving in.
As far as SuperSU... I wouldn't. It was sold off to some Chinese company a while back... Magisk 17.3 is available and recommended if you want to root. You can use the Magisk app to not only manage root access but to hide root from certain apps (Android Pay, for example).
Click to expand...
Click to collapse
thank you, I have the bootloader unlocked from settings, but if I got you right since it will wipe the internal memory I will need an otg to hold the rom until the process is complete, right?

[ROM][9.x]ScorpionROM v2.4[Google Pixel/XL][marlin/sailfish]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Feel The Sting!
Downloads:
Marlin ROM
Marlin TWRP
Sailfish ROM
Sailfish TWRP
See Additional Info below for more information regarding GApps and ROM features.
Installation:
You should be using the most current factory images from Google
Reboot to TWRP recovery or fastboot boot TWRP
Wipe/Factory Reset
Flash the ROM zip
Flash the TWRP install zip (Optional)
If you want root, setup the device first, then boot back to TWRP and flash current Magisk
Updating:
Remove/Disable any Substratum Overlays
Reboot to TWRP recovery or fastboot boot TWRP
Flash the ROM.zip
Flash TWRP install.zip (Optional)
If you are not rooted with Magisk, reboot system
If you are rooted with Magisk:
Reboot recovery
Flash Magisk.zip
Reboot system
Kernel Source:
Marlin Kernel (Unicornblood)
XDA:DevDB Information
ScorpionROM, ROM for the Google Pixel XL
Contributors
NepoRood, Blackscorpion3
Source Code: https://github.com/ScorpionRom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.2.3-x
Based On: DirtyUnicorns/AOSP
Version Information
Status: Stable
Current Stable Version: 2.4
Stable Release Date: 2019-02-11
Created 2019-02-11
Last Updated 2019-03-12

Additional Info
This rom is not meant to be the most feature filled, nor do we claim it is the fastest, or most streamlined. This is just a fun project for us to release our daily irritability.
GApps:
GApps are included with the build
Features:
Buttons:
Hide the Navbar (Gestures)
Swap Recent and Back Hardware keys (if supported by device)
Navbar button Customization
Accidental Touch
Show Arrow keys while typing
Pulse
Gestures:
AOSP Gestures
3 Finger Swipe for Screenshot
OP Style Navigation Gestures
Lock Screen:
Shortcuts
Fingerprint instant unlock
Face auto unlock
Lockscreen Charging info
Full-screen media cover art
Notifications:
Heads up
-time out
-snooze timer
-blacklist
Battery light customization (if supported by device)
In-call Vibration options
Power Menu:
Restart
Advanced Restart
Screenshot
Quick Settings:
Brightness slider position (top/bottom)
QS Rows and Columns
Quick QS pull down (left/right)
QS footer (enable/disable)
Status Bar:
Choose Icons
Battery Bar
Brightness Control
Clock Options
Battery Options
VoLTE Icon
Weather:
OmniJaws
Lockscreen Weather
Misc:
Accent Colors (Fruity Pebbles v2.0)
Font Service
QS Tile Styles
Wake on Charge
Vibrate on Plug
Working:
Pretty much everything
Not Working:
Haven't found anything
Join us on Telegram for the latest news and discussion: Link
Credits:
@Blackscorpion3
The hard working teams at DU, GZOSP, Invictrix, and Lineage
And anyone I forgot...

Reserved

grateful to see how there are still people doing custom rom

Thanks for the extra content!
Also, what's the device tree?

kingbri said:
Thanks for the extra content!
Also, what's the device tree?
Click to expand...
Click to collapse
You can find all our devices on Github, we have a common Device Org

Thank you

Thanks always glad to see new development.

@NepoRood I found a bug, after a while device theme reverts to off

okay so i tried flashing this rom on sailfish and have been getting this after six times of trying can't post pic but it doesnt flash no matter what i do.

I tried all possible ways....which of course means I didn't do something right... Sailfish Scorpion v2.2 has a zip install error and fails. Tried with and with out twrp installed. No error logs I can try to get some if this will help. Yep I verified md5. No I didn't wipe system, yes after 3rd time figured wasn't suppose too. Just fails. What am I missing? the file is Scorpion-v2.2-sailfish-20190210-1314.zip..(901,969,904 size)

kkjb said:
I tried all possible ways....which of course means I didn't do something right... Sailfish Scorpion v2.2 has a zip install error and fails. Tried with and with out twrp installed. No error logs I can try to get some if this will help. Yep I verified md5. No I didn't wipe system, yes after 3rd time figured wasn't suppose too. Just fails. What am I missing? the file is Scorpion-v2.2-sailfish-20190210-1314.zip..(901,969,904 size)
Click to expand...
Click to collapse
so your getting the same thing i am i tried and tries until i gave up

"ROM Kernel: Linux 4.x"
it is only 3.18.xx. no system wide night mode so no google dark, or chrome beta dark. or any app that will use the night mode. SElinux is permissive. google play store doesnt see it as a pixel. i didnt open photos, so i dont know if it had unlimited pixel storage. cool fonts. but battery eater. too many overlays. systemui registered on the battery app. only other time i have seen that is with substratum. a few extra wallpapers i saw in there. boot screen was cool but didnt fit the screen. seemed too slim for the screen. started to log in to stuff but thought the wiser of it. when i see my battery tank in 2 hours, clean install. full wiped both systems, both a and b. adb over the rom and twrp installer to twrp fastbooted. also would of been better with a black mode. anyways would not of tried if it had not said linux 4. got me on that..

Zehlek said:
@NepoRood I found a bug, after a while device theme reverts to off
Click to expand...
Click to collapse
Hmm, mine says "Dark" and "LIght", and stays dark, unless I install Substratum

Supernoobsammyson said:
"ROM Kernel: Linux 4.x"
it is only 3.18.xx. no system wide night mode so no google dark, or chrome beta dark. or any app that will use the night mode. SElinux is permissive. google play store doesnt see it as a pixel. i didnt open photos, so i dont know if it had unlimited pixel storage. cool fonts. but battery eater. too many overlays. systemui registered on the battery app. only other time i have seen that is with substratum. a few extra wallpapers i saw in there. boot screen was cool but didnt fit the screen. seemed too slim for the screen. started to log in to stuff but thought the wiser of it. when i see my battery tank in 2 hours, clean install. full wiped both systems, both a and b. adb over the rom and twrp installer to twrp fastbooted. also would of been better with a black mode. anyways would not of tried if it had not said linux 4. got me on that..
Click to expand...
Click to collapse
Sorry you had such a bad experience. I copied the DevDB project from my Crosshatch thread and missed the kernel reference. Thanks for letting me know.

NepoRood said:
Hmm, mine says "Dark" and "LIght", and stays dark, unless I install Substratum
Click to expand...
Click to collapse
I never use substratum. Not sure. Other then that it is good

NepoRood said:
Sorry you had such a bad experience. I copied the DevDB project from my Crosshatch thread and missed the kernel reference. Thanks for letting me know.
Click to expand...
Click to collapse
Not a bad experience, testing it. Just what I found. I like the scorpion section. All the mods in one spot for UI. I know I had revert back a few times on theme. When I change font and display and when I ticked on immersive. And don't get me wrong, I am just reporting what I saw. Thank for the work. It is not easy.

MVNO DeSIngS said:
okay so i tried flashing this rom on sailfish and have been getting this after six times of trying can't post pic but it doesnt flash no matter what i do.
Click to expand...
Click to collapse
Sailfish comming soon
Don't Flash Marlin rom

See

mirketos said:
See
Click to expand...
Click to collapse
cool ill wait

[ROM][SM-T580][SM-T585][UNOFFICIAL][10.0] CrDroid-6.7 64bit 20200630

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
https://github.com/crdroidandroid/crdroid_features
Instructions
1. Install latest TWRP
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Known Issues
-
Notes
CrDroid Builds
SM-T580
3. 20200630: june security patch, review device tree, switch to samsung stock sound: https://drive.google.com/file/d/16Gj2-mVqfCX4CcWT2qIjvL3vdgvWcHzi/view?usp=sharing
2. 20191118: november security update, update video driver up to r28, update omx codecs, latest updates from @followmsi: https://drive.google.com/file/d/14A0ya79Z4dQNWV9K6fUHRRqW40ptwEWk/view?usp=sharing
1. 20191101: https://drive.google.com/file/d/1KVV2JRqmL41ziJlHoHVJP133Atxo4hvN/view?usp=sharing
SM-T585
3. 20200630: june security patch, review device tree, switch to samsung stock sound: https://drive.google.com/file/d/1JtiHCkM6D7jwAT20aHCjrwN8cYWz073K/view?usp=sharing
2. 20191117: november security update, update video driver up to r28, update omx codecs, latest updates from @followmsi: https://drive.google.com/file/d/1sqiNlEDkwXxrgDceRqhGLEsWJcBHvhYS/view?usp=sharing
1. 20191101: https://drive.google.com/file/d/1B2sFQyhxVlc3T4Gp8OtCvdjNbETb64vz/view?usp=sharing
Gapps
- For now i'm using gapps from: - For now i'm using gapps from: https://forum.xda-developers.com/and...0-0-0-t3968500
- or you can use gapps from: https://www.cyanogenmods.org/download-gapps-for-android-10/
still not available: https://opengapps.org
Platform: ARM64
Android: 10.0
Variant: any
Root
Install latest magisk from canary channel (version 20.1+): https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
TWRP
official twrp:
SM-T580: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html
SM-T585: https://twrp.me/samsung/samsunggalaxytaba101lte2016.html
Sources
Sources: https://github.com/crdroidandroid
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxllte and https://github.com/Valera1978/android_device_samsung_gtaxlwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxllte and https://github.com/Valera1978/android_vendor_samsung_gtaxlwifi
Thanks
Thanks to CrDroid team
Thanks to LineageOS team

Thanks for all your work and supporting our table

I see many great roms being unofficial. What is it needed to be official? And why some devs don't bother making it official?

Dev, thanks a lot! Great job! More better than LOS 17.:good:

Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
...
TWRP
1. you can use the recovery created by @followmsi: https://forum.xda-developers.com/galaxy-tab-a/development/rom-20181008-t3851915
2. or you can use my version (this is repack 3.2.3 recovery with new kernel and fix mtp in recovery, I used it for develop after flash latest 8.1 official firmware with new bootloader)
SM-T580: https://drive.google.com/file/d/1RitUyjk6gfYsilXRVHC-Wl_61RmqZ57g/view?usp=sharing
SM-T585: https://drive.google.com/file/d/1t8ImEBfqlbkE7oVru4YTVLXa-UEq4rZC/view?usp=sharing
....
Click to expand...
Click to collapse
@followmsi took down his Omni6 TWRP and advised us to use the new official 3.3.1-0 from the TWRP website - yours seems older, so which is better?
Does crDroid Q have all the great options already that Pie had? And do we have to flash any firmware/vendor or can we simply clean flash from any existing Pie rom?
Thanks for your work and this rom :good:

No Vulkan available, can you please fix it like in other Ten Roms ?
Great Rom with look & feel like crDroid Pie. :good:
I did a clean install.

please after install rom and go into system
is there any need to make system-as-root (SAR)
and which version of gapps work without any bugs
any bugs in this rom please, cause i use rr 5.8.5 without any bugs at all
any advises pleeeeeeeeeeeeeeease?

rapidm said:
I see many great roms being unofficial. What is it needed to be official? And why some devs don't bother making it official?
Click to expand...
Click to collapse
For a ROM to be called OFFICIAL, the developer needs to build the ROM from source and provide regular weekly updatesand has to stick to the guidelines the developer team have setup.
Like for example LineageOS, the dev can't include a hack or work-around for some bugs in the ROM with a certain device.
For example with the Redmi Note 3, while there was a mod present to fix the flashlight issue, the dev himself couldn't include it in the ROM as it didn't comply with the LineageOS guidelines.
Every developer community, for e.g., LineageOS, RR, DU, OmniRom, AICP, MOKEE,......., have there own guidelines.
---------- Post added at 04:52 AM ---------- Previous post was at 04:43 AM ----------
fadiiiiii said:
please after install rom and go into system
is there any need to make system-as-root (SAR)
and which version of gapps work without any bugs
any bugs in this rom please, cause i use rr 5.8.5 without any bugs at all
any advises pleeeeeeeeeeeeeeease?
Click to expand...
Click to collapse
I had no problem installing Open_gapps-arm64-10.0-nano-20191006-BETA.zip an was able to setup the tablet without any errors.
Didn't do the SAR thing as I don't need root, as I use the tablet for browsing and watching streams
---------- Post added at 04:55 AM ---------- Previous post was at 04:52 AM ----------
Nimueh said:
Does crDroid Q have all the great options already that Pie had? And do we have to flash any firmware/vendor or can we simply clean flash from any existing Pie rom?
Thanks for your work and this rom :good:
Click to expand...
Click to collapse
I flashed it directly with a full wipe, my previous rom was Bootleggers ROM 4.3 Pie and didn't incounter any problems.
It has allot of options just like the pie version, don't know if they are all there but there is enough to choose from.

is there any need to make system-as-root (SAR) to root with magisk 20?

fadiiiiii said:
is there any need to make system-as-root (SAR) to root with magisk 20?
Click to expand...
Click to collapse
I don't need root but I tried it for you.
I just tried to install magisk in the normal way and it didn't give any errors.
After it I tested to see if it past safety net and it did.
After that I installed adaway and that requested root like normally and I gave it access.
But when it tried to install the host files it failed.
When I try to read the buildprob with a root file explorer, that works like normally after granting rood.
So maybe adaway needs the sar method, or it doesn't work with android 10 yet.

RichyE said:
After that I installed adaway and that requested root like normally and I gave it access.
But when it tried to install the host files it failed.
Click to expand...
Click to collapse
Go into Adaway's settings and select systemless, then it works fine.
I flashed crDroid earlier and for a 1st build it looks pretty good. It has some of crDroid's options, but not all of them. For example no option for smartbar under navigation and no way to modify recents to have the rambar or at least the clear all button. I installed a couple of launchers (Lawnchair, Hyperion + OPLauncher2) to use with Quickswitch in an attempt to get different recents, but Quickswitch complained with all 3 of them that this version wasn't supported
Settings crash when trying to change the hardware button layout - I wanted to put Screenshot on long-press since there's no smartbar, but Settings wasn't having any of it
Oh and an oddity: When I plug the device in to charge the screen lights up like it should ... but if I simply walk away it will go dark after the 30 seconds timeout and then light up again, rinse + repeat. I had to actually turn off the screen with the power button to get it to stay off while charging ... I've never seen THAT before, so no idea what's causing it.
@Valera1978 - your link behind "For now i'm using gapps from" in the OP doesn't work, maybe you can fix it?
Wake-on-Home works, Volume wake didn't and then it did but that's the same behaviour we had on some Pie roms already.
That's it for now ... not sure if I'll stay on this one or go back to my Pie rom, but it's definitely usable already - thank you @Valera1978 :good:

Nimueh said:
Go into Adaway's settings and select systemless, then it works fine.
Settings crash when trying to change the hardware button layout - I wanted to put Screenshot on long-press since there's no smartbar, but Settings wasn't having any of it
Oh and an oddity: When I plug the device in to charge the screen lights up like it should ... but if I simply walk away it will go dark after the 30 seconds timeout and then light up again, rinse + repeat. I had to actually turn off the screen with the power button to get it to stay off while charging ... I've never seen THAT before, so no idea what's causing it.
Click to expand...
Click to collapse
Thanks that did the trick with adaway, but the setting doesn't stick.
Not a big problem just have to set it again when I want to update.
I can confirm the settings crashing when you try to change the buttons.
I just used my charger but I didn't notice the light going on and off.

RichyE said:
Thanks that did the trick with adaway, but the setting doesn't stick.
Not a big problem just have to set it again when I want to update.
I can confirm the settings crashing when you try to change the buttons.
I just used my charger but I didn't notice the light going on and off.
Click to expand...
Click to collapse
Thanks for pointing that out about Adaway, I hadn't noticed - but yes, it does it here too and for some odd reason adblocking was disabled again after a reboot.
I tried it a few times now - if I turn on the screen and then let the device sit there, the screen will go off after the selected timeout (30 seconds here), but then the screen will come back on after a second or 2. Then it goes off again after 30 seconds and comes right back on. This will keep going indefinitely unless I turn the screen off manually with the power button. Plus I just noticed that it isn't only when charging but all the time ... very odd, like something is waking the screen again right after it goes off. I definitely didn't have that on my previous Pie rom and my phone with crDroid Pie also doesn't do it. I'm stumped
Edit: I think I found the culprit that keep waking up my screen :victory:
On the tablet I use a free SIM card with free monthly data that's sponsored by advertisements. It has it's own lockscreen which doesn't even show up here on Q but did on Pie. If I "freeze" that app with TiBu my screen turns off as it should - but without that app installed I won't get my free data each month.
No idea if this is a Q issue or a crDroid one, but something must be blocking the app lockscreen and causing this odd behaviour. I'll have to see if I still get my free data allowance when the app is installed but not using it's lockscreen ... otherwise I'm going back to Pie. :fingers-crossed:

@Valera1978
After 1 Day of heavily testing Games, Videos, Youtube, Internet i can say, this is the Best 10 Rom for (my) 580's.
Big Thx again for your great Work. :good:
Please add Vulkan like in Lineage or RR Ten.

hello installing the rom but boot stuck on the crdroid logo
wipe / cache after installation however
an idea ?

33fcgb said:
hello installing the rom but boot stuck on the crdroid logo
wipe / cache after installation however
an idea ?
Click to expand...
Click to collapse
Did you install anything else to other then the rom?

is this rom very good for daily use pleeeeease?
any bugs please?

just the rom installed cleanly but remains stuck on the logo crdroid at startup

33fcgb said:
just the rom installed cleanly but remains stuck on the logo crdroid at startup
Click to expand...
Click to collapse
I would try:
- install the official TWRP page(Link: https://forum.xda-developers.com/showpost.php?p=80692007&postcount=672)
- save all my data
- wipe all partitons
- reboot into TWRP
- format (not WIPE!!) /data partition
- reboot into TWRP
- install only rom and boot
If rom boots normal, thenn install gapps...

installing the rom only cleanly starts works but when I want to add the gapps remains stuck on the logo cr droid
Why ?
ps: I tested with gapps indicated on this forum

[ROM][OFFICIAL][CrDroid][PIE]

crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
*****Disclaimer*****
Important note before proceeding!!!
The copy A/B partions zip is crucial in order to prevent bricks. It only needs to be done if your coming from the stock ROM or you recently restored stock firmware manually. Other wise without it you can brick due to Motorola's A/B partition scheme.
Preparation for A/B Roms:
01. Download TWRP.
02. Remove your google account under Settings > Accounts then factory reset your device as FRP is enforced.
03. Unlock your bootloader
04. Use terminal to boot latest twrp.img "fastboot boot twrp.img"
05. While on Slot_A Flash copypartitions.zip (This step only needs to be completed Once only after updating from stock factory firmwares.)
06. While in TWRP choose Reboot > bootloader
07. Now you're ready for ROM Steps below
ROM - Installation:
01. Download the ROM.
02. Use terminal to boot latest twrp.img "fastboot boot twrp.img"
03. Wipe data, dalvik, system and internal storage, then format userdata.
04. Flash ROM.zip + TWRP_installer
05. Reboot > Recovery
06.Install Gapps + Magisk (if you choose)
07. Reboot > System
Updating (AKA 'dirty flash'):
01. Download the updated ROM
02. Boot into recovery
03. Install ROM.zip + TWRP_installer
04. Reboot > Recovery
05. flash gapps + Magisk (if you choose)
06. Reboot > System
Notes:
Any time your internal storage aka "Userdata" is from a stock install you must "format data" in recovery before using ROMS
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
LIST-KNOWN-ISSUES-ON-YOUR-DEVICE-HERE
None
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- ENTER-SPECIFIC-THANKS-HERE-IF-YOU-HAVE-THEM
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Device tree: https://github.com/Rondeau79/android...motorola_ocean
Vendor tree: https://github.com/Rondeau79/proprie...g/lineage-16.0
Download Link: https://androidfilehost.com/?w=files&flid=302315
AB copy partitions Download Link: https://androidfilehost.com/?fid=4349826312261636295
XDA:DevDB Information
CrDroid Pie, ROM for the Moto G7 Power
Contributors
Rondeau79
Source Code: https://github.com/crdroidandroid/android/tree/9.0
Kernel tree:https://github.com/Rondeau79/android_kernel_motorola_sdm632/tree/lineage-16.0
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest bootloader and TWRP recovery
Based On: Lineage OS
Version Information
Status: Stable
Current Stable Version: 5.11
Stable Release Date: 2019-11-25
Created 2019-11-27
Last Updated 2019-12-23

Reserved

Thank you Rom is really stable and beautiful plenty of customization baked in. Been running it for 4 days no problems at all OTA is also working great two updates already love it

Thanks! I run it as my daily driver. My first official ROM! I have built plenty in the past, but decided to make the jump. As soon as a few bugs get straighten out I will be moving it to Android 10!

Just installed the rom a couple of hours ago, and damn it's good! Only a small problem though, when you make a screenshot the little menu that appears where you can edit and take extended screenshots closes after a few seconds on its own. Is this intended or a bug? If so I hope you can fix it in the next update. Thanks a lot for the rom!

badapple420 said:
Thank you Rom is really stable and beautiful plenty of customization baked in. Been running it for 4 days no problems at all OTA is also working great two updates already love it
Click to expand...
Click to collapse
Gabe29 said:
Just installed the rom a couple of hours ago, and damn it's good! Only a small problem though, when you make a screenshot the little menu that appears where you can edit and take extended screenshots closes after a few seconds on its own. Is this intended or a bug? If so I hope you can fix it in the next update. Thanks a lot for the rom!
Click to expand...
Click to collapse
You can change the animation speeds in developer options to slow down that screenshot options. That will allow that edit page to stay on your screen longer.

Rondeau79 said:
You can change the animation speeds in developer options to slow down that screenshot options. That will allow that edit page to stay on your screen longer.
Click to expand...
Click to collapse
I see, I set the duration scale to 0.5x so no wonder it closed so fast. Anyways is there a way to make opengl skia the default gpu renderer? Because it switches back to default after a reboot.

Gabe29 said:
I see, I set the duration scale to 0.5x so no wonder it closed so fast. Anyways is there a way to make opengl skia the default gpu renderer? Because it switches back to default after a reboot.
Click to expand...
Click to collapse
Flash the attached zip in recovery. It will take care of that.

Rondeau79 said:
Flash the attached zip in recovery. It will take care of that.
Click to expand...
Click to collapse
Thank you, it worked.

As it is getting regular updates I though I would give this ROM a try on my new G7 Power. To be honest it works much better than I expected, not seeing any stability problems and it has some nice features. Still testing, but will probably start using this ROM + phone as my daily.
I did however have a heck of a time installing and getting both the ROM and TWRP to boot on the phone. That mostly had nothing to do with this ROM and more to do with the A/B partitions thingy Google has done on recent phones (which I have grown to hate). Also the ROM's install instructions are a bit vague in parts, so there was a bit of a learning curve (for me at least).
One the upside everything I have tested so far works. Storage encryption is enabled by default and working, wifi works (even with hidden SSIDs), dual SIMS works, camera app works, fingerprint works , call quality seems good. SELinux is disabled, which is not good but I can live with.
A big thanks for the all the done work on this!!

joefidler said:
As it is getting regular updates I though I would give this ROM a try on my new G7 Power. To be honest it works much better than I expected, not seeing any stability problems and it has some nice features. Still testing, but will probably start using this ROM + phone as my daily.
I did however have a heck of a time installing and getting both the ROM and TWRP to boot on the phone. That mostly had nothing to do with this ROM and more to do with the A/B partitions thingy Google has done on recent phones (which I have grown to hate). Also the ROM's install instructions are a bit vague in parts, so there was a bit of a learning curve (for me at least).
One the upside everything I have tested so far works. Storage encryption is enabled by default and working, wifi works (even with hidden SSIDs), dual SIMS works, camera app works, fingerprint works , call quality seems good. SELinux is disabled, which is not good but I can live with.
A big thanks for the all the done work on this!!
Click to expand...
Click to collapse
Download terminal emulator
Su
setenforce 1
SeLinux will be enforcing

Hey @Rondeau79, thank you for the rom, this was actually the only one I was able to flash. (But I think the problem is on my side of the table
Is there any way to get rid of the google-parts of the rom (searchbar etc.)? Thx in advance!

[email protected] said:
Hey @Rondeau79, thank you for the rom, this was actually the only one I was able to flash. (But I think the problem is on my side of the table
Is there any way to get rid of the google-parts of the rom (searchbar etc.)? Thx in advance!
Click to expand...
Click to collapse
The search bar is apart of the launcher, it is based off the Lawn chair launcher. You could always not flash Gapps and use Aptoide as store for apps..

Any suggestions on the best way to use MicroG with this ROM? It's listed here https://forum.xda-developers.com/showpost.php?p=71042083 as having signature spoofing but I could not find it. cheers.

joefidler said:
Any suggestions on the best way to use MicroG with this ROM? It's listed here https://forum.xda-developers.com/showpost.php?p=71042083 as having signature spoofing but I could not find it. cheers.
Click to expand...
Click to collapse
Some ROMs have an option button built in. Others the option is just baked in, it will work.

joefidler said:
Any suggestions on the best way to use MicroG with this ROM? It's listed here https://forum.xda-developers.com/showpost.php?p=71042083 as having signature spoofing but I could not find it. cheers.
Click to expand...
Click to collapse
Go with the Xposed method. As of late CrDroid Pie dose not support it. That would have to be a custom build.

Thanks @Rondeau79 will try Xposed. MicroG's spoofing check does not detect signature spoofing.
---------- Post added at 02:56 PM ---------- Previous post was at 02:56 PM ----------
Thanks @Rondeau79 will try Xposed. MicroG's spoofing check does not detect signature spoofing.

This will be the first ROM I flash to my phone. Can wait to get it set up!

joefidler said:
Any suggestions on the best way to use MicroG with this ROM? It's listed here https://forum.xda-developers.com/showpost.php?p=71042083 as having signature spoofing but I could not find it. cheers.
Click to expand...
Click to collapse
WoofahRayet said:
This will be the first ROM I flash to my phone. Can wait to get it set up!
Click to expand...
Click to collapse
Any questions feel free to pm me!

Thanks again for this port o.p
Ive tried all roms accept omni and this rom by far exceeds expectations. The Best Gaming Rom ive used.
I dont know what changes were made from the kernel between the 11/19 build and the 11/28 build. But I got better performance with the 11/19 kernel so i lm using the 11/19 build boot.img on the 11/28 rom update.
Battery drain is less noticeable on the latest build as the 11/19 build was draining very fast.
Once one roots this rom with a few tweaks, one will see a huge boost in performance.
Resurrection Remix was my daily driver prior because of the Led Notification light in which i love on this phone. 
 @Rondeau79 can the notification light get added to CRDroid like on RR and Aospex...?cOther than that no bugs to report.
You rock o.p..!!!

Better Mobile App

welcome