Hi everyone.
I am (like a few I assume) still on marshmallow for xposed. So I was curious, are there any active developments in custom MM roms? And if not, which Rom is good even with current issues/abondoned? I was hoping to using fluenceuhd but cannot he the patch or Rom zip and was curious about trying cyanogen. Any ideas or feedback would be greatly appreciated.
If anyone could recommend a Rom that could replace the xposed modules I use then I might consider updating to N. The key xposed modules are:
Rootclock
Amplify
Bootmanager
Lucky patcher
G4 toolbox
Gravitybox
Youtube adaway
Youtube background playback
Greenify
Enhanced and burnt toast
No overlay warning
Thanks
megatron_lives said:
Hi everyone.
I am (like a few I assume) still on marshmallow for xposed. So I was curious, are there any active developments in custom MM roms? And if not, which Rom is good even with current issues/abondoned? I was hoping to using fluenceuhd but cannot he the patch or Rom zip and was curious about trying cyanogen. Any ideas or feedback would be greatly appreciated.
If anyone could recommend a Rom that could replace the xposed modules I use then I might consider updating to N. The key xposed modules are:
Rootclock
Amplify
Bootmanager
Lucky patcher
G4 toolbox
Gravitybox
Youtube adaway
Youtube background playback
Greenify
Enhanced and burnt toast
No overlay warning
Thanks
Click to expand...
Click to collapse
Id say Res rom best for nogut. Most customizable. But that situation is up in the air because developer no longer working on it. But there's others trying. I do miss xposed too, wish it was on nogut already. Youtube is so annoying with all the adds.
Nick216ohio said:
Id say Res rom best for nogut. Most customizable. But that situation is up in the air because developer no longer working on it. But there's others trying. I do miss xposed too, wish it was on nogut already. Youtube is so annoying with all the adds.
Click to expand...
Click to collapse
Cool thanks for the advice, ill check it out
I was in the same problem some time ago, but i finally went to nougat.
Fulmics rom works great, lucky patcher works in the same way that it does with Xposed.
I've replaced YouTube background play with yMusic(try OGYoutube, its also very good)
So, almost all the Xposed modules that you're using are can be replaced: almost but GravityBox.
Anyway, the rom have some mods that can do some of the things that GravityBox does...
To finish, i think you should move to nougat.
Hi Skrb, thanks for the reply, that is exactly the sort of review I needed.
I am not desperate to move to Nougat, just getting bored of not having much to do with MM; but I shall certainly consider the upgrade.
The only thing I am uncertain about is the possibility of downgrading from N to MM> I understand that to do so you need to also downgrade recovery/boot? Anyway, I'll look into it - just so I have a safe way of returning to my TWRP MM Nandroid
I dont know, but i think that for downgrade you will have to flash the boot.img from a PC... But i cannot guarantee that
You only have to flash mm boot.zip and mm modem.zip via twrp from autoprime
Then you can restore TwrpBackup
And also flash N boot.zip and N modem.zip before flashing Fulmics Rom
http://downloads.codefi.re/autoprime/LG/LG_G5/H850
I've just switched back to MM from nougat purely for xposed! Also seem to be getting better battery life too even though it was great on nougat, seems to be even better on MM. Although it might be just me imagining it.
Related
anyone willing to build up this post on what modules do work on the g3 without putting the phone into a boot loop? yesterday i got xposed alpha 3 installed and had the g3 tweakbox. tried to install a couple other modules that i had on my nexus 4 (kitkat) and that put my device in a boot loop.
here are the list i got:
gmail app attachment size
playstore changelog
wa/wa+ theme
xgpm
xinstaller
youtube background playback
on the nexus, when i installed xposed framework, i got a file that i could flash from twrp in case phone got into a boot loop (it disables the modules or the whole framework i think) but didn't get that on lollipop. anyone knows of a way to get rid of a boot loop other than a factory reset? (had to do that yesterday so asking for future reference).
is it a trial and error to find out if a module will boot loop the phone on lollipop? or is there some other method?
RockyAJ said:
anyone willing to build up this post on what modules do work on the g3 without putting the phone into a boot loop? yesterday i got xposed alpha 3 installed and had the g3 tweakbox. tried to install a couple other modules that i had on my nexus 4 (kitkat) and that put my device in a boot loop.
here are the list i got:
gmail app attachment size
playstore changelog
wa/wa+ theme
xgpm
xinstaller
youtube background playback
on the nexus, when i installed xposed framework, i got a file that i could flash from twrp in case phone got into a boot loop (it disables the modules or the whole framework i think) but didn't get that on lollipop. anyone knows of a way to get rid of a boot loop other than a factory reset? (had to do that yesterday so asking for future reference).
is it a trial and error to find out if a module will boot loop the phone on lollipop? or is there some other method?
Click to expand...
Click to collapse
Yes in twrp you can go into file manager and under apps delete the xposed app that is causing the bootloop wipe the caches and you should be good
Working Lollipop modules:
For the sake of good camera, I'm using stock based CloudyRom. So the results are for stock based ROMS. Will be updating the post after future tests
Working:
Obviously G3 Tweakbox
GravityBox (I have it for the volume button cursor control)
AppSettings (Surpisingly it works great. Just dong go below 540 for stock LG apps)
ChromePie
Greenify
Not Working:
klukiyan said:
For the sake of good camera, I'm using stock based CloudyRom. So the results are for stock based ROMS. Will be updating the post after future tests
Working:
Obviously G3 Tweakbox
GravityBox (I have it for the volume button cursor control)
AppSettings (Surpisingly it works great. Just dong go below 540 for stock LG apps)
ChromePie
Not Working:
Greenify (I don't need it, just know it doesnt work)
Click to expand...
Click to collapse
and here i thought gravitybox works only for nexus devices.hah.i ended up buying tweakbox. don't regret it though. greenify works flawlessly for me. am running stock rom that came with phone. didn't flash any custom ones. i use app ops instead of appsettings though i just looked that one up and has a few more options. also lucky patcher works fine
let's keep the lists coming
klukiyan said:
For the sake of good camera, I'm using stock based CloudyRom. So the results are for stock based ROMS. Will be updating the post after future tests
Working:
Obviously G3 Tweakbox
GravityBox (I have it for the volume button cursor control)
AppSettings (Surpisingly it works great. Just dong go below 540 for stock LG apps)
ChromePie
Not Working:
Greenify (I don't need it, just know it doesnt work)
Click to expand...
Click to collapse
what you mean sir greenify not working? i installed it then activated modules...then no bootloop..but for technicalities you found out why its not working.please explain..so that i will change to servicely
chacho_2me said:
what you mean sir greenify not working? i installed it then activated modules...then no bootloop..but for technicalities you found out why its not working.please explain..so that i will change to servicely
Click to expand...
Click to collapse
I mean the greenify as Xposed module. As the app it works perfect. Sorry for confusion.
klukiyan said:
I mean the greenify as Xposed module. As the app it works perfect. Sorry for confusion.
Click to expand...
Click to collapse
Greenify as a xposed module works perfectly for me on both latest Cloudy and CM
4ndroid99 said:
Greenify as a xposed module works perfectly for me on both latest Cloudy and CM
Click to expand...
Click to collapse
Thank you for the info. I saw it totally red here https://docs.google.com/spreadsheets/d/10vutBHBlPtEFtnqNQBuz-IzStlXNGbVS6K0BRpwz7n0/edit#gid=0, so was afraid to try.
klukiyan said:
Thank you for the info. I saw it totally red here https://docs.google.com/spreadsheets/d/10vutBHBlPtEFtnqNQBuz-IzStlXNGbVS6K0BRpwz7n0/edit#gid=0, so was afraid to try.
Click to expand...
Click to collapse
i can confirm it works fine for me too. module and app.
I personally use and can confirm they all work; Greenify, Amplify, Flat syle bar indicators , G3 Tweaksbox and Gravitybox without any issues.
Hello.
I just need to ask something. Is there any custom ROM based on stock LG firmware (Android 5.0) which allows you to use Xposed modules, but keeping all the functionality of QuickCircle case?
Ćwirek said:
Hello.
I just need to ask something. Is there any custom ROM based on stock LG firmware (Android 5.0) which allows you to use Xposed modules, but keeping all the functionality of QuickCircle case?
Click to expand...
Click to collapse
Not for now... To install Xposed Framework you have to delete/freeze Quickcircle... But, in beggining weather apk was also necessary to freeze... Not anymore. There are some mods to use xposed and weather. Probably, some day, circle case will also be available with xposed
Delgadovsky said:
Not for now... To install Xposed Framework you have to delete/freeze Quickcircle... But, in beggining weather apk was also necessary to freeze... Not anymore. There are some mods to use xposed and weather. Probably, some day, circle case will also be available with xposed
Click to expand...
Click to collapse
Can you elaborate on that? Earlier i got into a bootloop and had to factory reset phone and i lost the backup xposed made for weather and the clock thingie. A guy sent me the apks that the app created for him. Weather and clock, etc. You think it would be safe to just install the weather ones from within the phone(not flash from recovery) and make them system apps to have it working again? If not, can you advise please? Thanks
Sent from my LG-D855 using XDA Free mobile app
Please let me know if someday Xposed and QuickCircle case will work together without freezing anything in Titanium Backup
Ćwirek said:
Please let me know if someday Xposed and QuickCircle case will work together without freezing anything in Titanium Backup
Click to expand...
Click to collapse
as far as I know xposed new version (69) works.
vassagout said:
as far as I know xposed new version (69) works.
Click to expand...
Click to collapse
Yes it does. I'm using it on my D851 now.
Sent from my LG-D851 using Tapatalk
well, THE man himself said it:
So here it is, framework version 69 with support for LG's encrypted apps (LGCover, LGWeather, maybe more). Please make sure to clean your Dalvik cache after flashing the ZIP if you have an LG device and had issues with these apps.
Click to expand...
Click to collapse
good to know our device is still gettin' some love
i'm still on ver68 & attached is a list of my working modules. btw, do we still need the LP mem fix?
You mean that the version 69 could work with the quickCircle?
Hmm, I will backup and test it, it's very interesting...
Edit: Ok, I confirm that the 69 is ok with the QuickCircle and weather. That's great
(tested on Cloudy 2.5)
Envoyé de mon LG-D855 en utilisant Tapatalk
This is a collection of small changes to fix things on my Moto G4 XT1626 that others may find useful.
ElementalX 1.02 with DTV driver:
This is the great and stable ElementalX Kernel from flar2, without any code changes, but with the ISDBT TV kernel driver that he didn't include in the official version, useful for XT1626 owners that want root but need the DTV receiver working.
Disable esdfs:
This is a magisk module (can also be flashed if you don't use magisk) to disable ESDFS and use FUSE instead, so apps like apps2sd work properly on the moto G4 or G4 Plus.
MotoG4 incall record enabler:
This is a magisk module (can also be flashed) that changes the mixer controls mapping to allow incall recording using any playstore app(even without root). Tested with ACR, works fine. This was made for Stock Nougat, untested on other roms.
I will add more quirks and mods I develop in the future to this thread.
Working Fine ?
_wyrm said:
This is a collection of small changes to fix things on my Moto G4 XT1626 that others may find useful.
ElementalX 1.02 with DTV driver:
This is the great and stable ElementalX Kernel from flar2, without any code changes, but with the ISDBT TV kernel driver that he didn't include in the official version, useful for XT1626 owners that want root but need the DTV receiver working.
Disable esdfs:
This is a magisk module (can also be flashed if you don't use magisk) to disable ESDFS and use FUSE instead, so apps like apps2sd work properly on the moto G4 or G4 Plus.
MotoG4 incall record enabler:
This is a magisk module (can also be flashed) that changes the mixer controls mapping to allow incall recording using any playstore app(even without root). Tested with ACR, works fine. This was made for Stock Nougat, untested on other roms.
I will add more quirks and mods I develop in the future to this thread.
Click to expand...
Click to collapse
Anyone tried the call recording on custom room?
Waycloud said:
Working Fine ?
Click to expand...
Click to collapse
On stock ROM?
How can I get the DTV driver or the last ElementalX with DTV driver?
brunopio said:
How can I get the DTV driver or the last ElementalX with DTV driver?
Click to expand...
Click to collapse
I want to know too. My model is XT1626
Doesn't the last ElementalX has the DTV driver included already? I believe flar2 started including the DTV driver a couple weeks after I created this thread.
_wyrm said:
MotoG4 incall record enabler:.
Click to expand...
Click to collapse
Thank you very much, in particular for the call recording. Although the recording app I had been using (CallRec) did not detect the new VOICE_COMMUNICATION stream, as you mention in the OPs it works fine with ACR. I'm running it in recent LOS 14.1 Athene builds on an XT1625.
One (somewhat off topic) question: I switched from LOS SU to Magisk in order to install this module. Except for a few other apps that seem to prefer LOS SU I'm happy with Magisk managing SU but in case I want to switch back to LOS SU ...is there a way to get this installed while using LOS SU. Perhaps this is a question for the Magisk thread but I've found no answers by searching so I'm starting here. Thanks again!
---------- Post added at 05:56 PM ---------- Previous post was at 05:48 PM ----------
optionalmgrr.la said:
Anyone tried the call recording on custom room?
Click to expand...
Click to collapse
Lineage OS as described in previous post section.
IronTechmonkey said:
One (somewhat off topic) question: I switched from LOS SU to Magisk in order to install this module. Except for a few other apps that seem to prefer LOS SU I'm happy with Magisk managing SU but in case I want to switch back to LOS SU ...is there a way to get this installed while using LOS SU. Perhaps this is a question for the Magisk thread but I've found no answers by searching so I'm starting here. Thanks again!
Click to expand...
Click to collapse
All this modules does is replace/bind (mount -bind), /system/etc/mixer_paths.xml with a custom version. You can do the same with a shell script, luckypatcher, or any other root app that alows you to selectively replace files in the system. You can also simply replace the file directly in LOS's /system/ if you want to make it permanent and don't care about keeping /system untampered.
Hope we can have call recording on LOS
hello plz help me in to enable call recordings in moto g5 plus
please friend
_wyrm said:
This is a collection of small changes to fix things on my Moto G4 XT1626 that others may find useful.
ElementalX 1.02 with DTV driver:
This is the great and stable ElementalX Kernel from flar2, without any code changes, but with the ISDBT TV kernel driver that he didn't include in the official version, useful for XT1626 owners that want root but need the DTV receiver working.
Disable esdfs:
This is a magisk module (can also be flashed if you don't use magisk) to disable ESDFS and use FUSE instead, so apps like apps2sd work properly on the moto G4 or G4 Plus.
MotoG4 incall record enabler:
This is a magisk module (can also be flashed) that changes the mixer controls mapping to allow incall recording using any playstore app(even without root). Tested with ACR, works fine. This was made for Stock Nougat, untested on other roms.
I will add more quirks and mods I develop in the future to this thread.
Click to expand...
Click to collapse
Please friend, you could include the DTV XT1626 driver in this kernel Vegito:
mega.nz/#!1R8XSRCD!L1pQiukRxflWfdPfiKmO13rIRdUn1RLaXUhFeGsIsuU
This kernel works best with the XT1626
yeah would be great
I can use DTV drivers on xt1625?
Sent from my [device_name] using XDA-Developers Legacy app
hope these modules get update to magisk 16, because here when i tried to flash over magisk manager or twrp, shows an error saying that magisk is not installed on system
nodio said:
hope these modules get update to magisk 16, because here when i tried to flash over magisk manager or twrp, shows an error saying that magisk is not installed on system
Click to expand...
Click to collapse
I desperately needed call recording feature on my Moto G4 Plus so I updated it myself to work with the latest version of Magisk (17.1). Here the file if you need it : drive.google.com/file/d/1fcO6FqFVXCUtwrFVTEijUG3LDaOWRmBP/view?usp=sharing
mithleshjs said:
I desperately needed call recording feature on my Moto G4 Plus so I updated it myself to work with the latest version of Magisk (17.1). Here the file if you need it : drive.google.com/file/d/1fcO6FqFVXCUtwrFVTEijUG3LDaOWRmBP/view?usp=sharing
Click to expand...
Click to collapse
I gave your version a try because I'm also running Magisk 17.1 and it trashed my system, wasn't expecting that much fun to happen.
After I installed module and rebooted the phone it just went to recovery mode, was forced to do a full reset.
Others be warned, try at your own risk...
lin_ux said:
I gave your version a try because I'm also running Magisk 17.1 and it trashed my system, wasn't expecting that much fun to happen.
After I installed module and rebooted the phone it just went to recovery mode, was forced to do a full reset.
Others be warned, try at your own risk...
Click to expand...
Click to collapse
FWIW I once used this on a Moto G4 Athene XT1625 running LOS 14.1 and Magisk 16x with no problems. Don’t know about Magisk 17 as I use LOS SU except when specifically testing something else but it's a simple mod which really "should" not cause that much trouble. In any event once you get your device back in shape you could try to enable call recording manually: https://forum.xda-developers.com/showpost.php?p=73603492&postcount=9.
[EDIT] Added details about device on which I had tested this in Magisk.
IronTechmonkey said:
FWIW I once used this on a Moto G4 Athene XT1625 running LOS 14.1 and Magisk 16x with no problems. Don’t know about Magisk 17 as I use LOS SU except when specifically testing something else but it's a simple mod which really "should" not cause that much trouble. In any event once you get your device back in shape you could try to enable call recording manually: https://forum.xda-developers.com/showpost.php?p=73603492&postcount=9.
[EDIT] Added details about device on which I had tested this in Magisk.
Click to expand...
Click to collapse
Thanks for your reply!
I agree that the mod should not have caused so much trouble, which is why I was a little shell shocked when it refused to boot to anything other than recovery. I'd just got the device set up nice and hadn't done a TWRP backup yet, so getting it back up and running again was a little painful, but perhaps good in a way as I'd learnt what didn't work well first time round, so this time it's lean and mean...
I've taken a look at the files enclosed in the mod (I know, I should have done that before installing it ... doh! ) and discovered that the location of mixer_paths.xml is different on my system, it's in /vendor/etc/ so I went ahead and swapped the modded file (I have root access) with my one and rebooted, phone came up with no sound output at all, so it looks like my newer system (and device, it's a Moto E5 XT1944-6) are not compatible with the modded mixer_paths.xml file.
I'd like to know which elements of the modded mixer_paths.xml file were change to make it work on the G4, I could then try to add/edit those particular ones in my mixer_paths.xml file to see if it works.
I have a backup of my original file so no pain in trying new settings....
For reference I'm running this ROM on my phone,
[GSI][8.1.0][OFFICIAL] Resurrection Remix O v.6.1.0 [08/18][ARM/ARM64]
it's quite impressive...
https://forum.xda-developers.com/pr...si-resurrection-remix-o-6-1-0-t3811299/page11
lin_ux said:
I gave your version a try because I'm also running Magisk 17.1 and it trashed my system, wasn't expecting that much fun to happen.
After I installed module and rebooted the phone it just went to recovery mode, was forced to do a full reset.
Others be warned, try at your own risk...
Click to expand...
Click to collapse
It shouldn't have caused so much trouble. It worked successfully on each of my friends Moto G4 Plus running stock ROM.
There seems to be a few different versions of xposed for nougat currently available. Lets use this thread to discuss what works and doesnt work for our device.
My setup
ROM: Nitrogen
XPOSED: https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Modules: minminguard, youtube adaway
works/doesnt work: so far both modules appear to be working. i have had a few app FC on reboot but nothing significant
Rovo says don't touch it.
https://github.com/rovo89/Xposed/issues/230?_utm_source=1-2-2#issuecomment-316623920
Face_Plant said:
Rovo says don't touch it.
https://github.com/rovo89/Xposed/issues/230?_utm_source=1-2-2#issuecomment-316623920
Click to expand...
Click to collapse
Was about to post a link to the same discussion.
nomisunrider said:
Was about to post a link to the same discussion.
Click to expand...
Click to collapse
Great minds think alike.
Haven't really missed Xposed on Nougat. Can't think of anything I used Xposed for that I'm not getting with current ROM (Screw'd) and Magisk modules.
Sent from my Nexus 6P using Tapatalk
I was preparing to switch to another ROM with a clean flash in mind so I decided to try this on my 6P running July security, RR ROM, Franco Kernel, and Magisk - even though it's not compatible with our device. Flash succeeded and device booted but immediately after a plethora of apps crashed. I was able to open the manager app and browse through the list of available modules but clicking on download yielded a microsecond download before failing in all cases. Pretty interesting at any rate. Apk confirmed that the framework had been installed. Hopefully, this helps push xposed development forward a little bit
Yeah, same here...gave it a try and multiple app crashes. Everything was fine after running the installer. Will try again when official support for the 6P is out.
Prey521 said:
Yeah, same here...gave it a try and multiple app crashes. Everything was fine after running the installer. Will try again when official support for the 6P is out.
Click to expand...
Click to collapse
yea having the same issues after installing the framework had to restore for now...
Installed v87 and seems to be working
so far enabled adblocker, youtube adaway, and greenify modules
greenify or youtube adaway modules don't seem to be working
running RR 5.8.3 - 7/8/17
I tried a version on Pure Nexus 7.1.1. Lots of FCs, some insignificant, some critical system processes. Turned the Greenify and 3C modules. 3C worked fine, but Greenify couldn't see that it's module was active. Xposed uninstall .zip worked fine for removal and return to no FC state. Sad.
running stock 7.1.1 N4F26T
working exposed version
xposed-v88.2-sdk25-arm64
no work:
xposed-v88-sdk25-arm64
xposed-v88.1-sdk25-arm64
xposed-v89-sdk25-arm64
Sup guys! I was finally able to find time to convert my previous patch for EPM to an Xposed module! This was not as simple as I expected, as it required dynamic XML generation/integration, which can be cumbersome to say the least. I tried to keep the code as generic as possible to support other models of the A2017, but there are no guarantees beyond the US model. I did add a configurable option to add a bootloader button, but as of this posting (B32), ZTE has disabled this functionality.
FAQ:
1. Can you add support for my model?
- Possibly, but at the minimum you would need to post your framework-zte-res.apk. Specifically, the files layout/global_dialog.xml and layout-land/global_dialog.xml are needed.
2. Does this support MiFavor 5.x?
- I cannot say, it's only been tested on A2017U B32, which uses MiFavor 4.x.
Thanks to wanam for the simple settings popup and apsun for the RemotePreferences library.
Xposed page: http://repo.xposed.info/module/com.none.epm_zte
very cool that you did a "port", have my thanks - even when I'm not running stock most of the time
Works xposed in Mifavor? 4.x or 5.0?
BaamAlex said:
Works xposed in Mifavor? 4.x or 5.0?
Click to expand...
Click to collapse
Only tested on B32 thus far, which runs MiFavor 4.2.
Works on Sl!m M!Favor 5.0 / 7.1.1 v 2.0. (A2017G).
Thanks man! Your the greatest! Any chance you can add the 3minit battery mod like last time
I would love to use this, however i don't want to install Xposed since i don't want to break safetynet...is there any way you can make this a magisk module as well?
Teet1 said:
I would love to use this, however i don't want to install Xposed since i don't want to break safetynet...is there any way you can make this a magisk module as well?
Click to expand...
Click to collapse
There's an Xposed magisk module tho
Choose an username... said:
There's an Xposed magisk module tho
Click to expand...
Click to collapse
It still breaks safetynet
Teet1 said:
It still breaks safetynet
Click to expand...
Click to collapse
Yes but the Xposed Installer app has a toggle switch to temporarily disable Xposed. So whenever you need to use an app such as Android Pay just disable Xposed and and then re-enable it when you're done.
bkores said:
Yes but the Xposed Installer app has a toggle switch to temporarily disable Xposed. So whenever you need to use an app such as Android Pay just disable Xposed and and then re-enable it when you're done.
Click to expand...
Click to collapse
Not worth it if i have to reboot my phone when I want to play games that require safetynet and use banking every time oh well, can't have all the pleasures in the world, but it would be nice to have this as a magisk module.
The thing is, I don't believe it's possible since you need to replace a small part of a file, not the whole file. I don't know how the Xposed module works (or Xposed itself) but I believe it somehow replaces that small part. If there was a Magisk module you wouldn't be able to further modify the framework and it would only work for one mifavor version.
I think this was already discussed but about a flashable zip version
Edit: Yeah, the dev talks about dynamic XML generation/integration
Choose an username... said:
The thing is, I don't believe it's possible since you need to replace a small part of a file, not the whole file. I don't know how the Xposed module works (or Xposed itself) but I believe it somehow replaces that small part. If there was a Magisk module you wouldn't be able to further modify the framework and it would only work for one mifavor version.
I think this was already discussed but about a flashable zip version
Edit: Yeah, the dev talks about dynamic XML generation/integration
Click to expand...
Click to collapse
This is correct. I went with Xposed for better compatibility across multiple h/w & s/w versions. ROM authors can likely cook it into their framework using the tutorial from the other thread :good:
Ah bummer. I was hoping to use this module but I'm running v87 Xposed (PurifyOS). EPM requires v88.x. I'm only on unofficial Xposed because Unicon works with it.
If I decide I don't need Unicon I'll definitely update and use EPM.
At the moment I'm using one of the many reboot menu utilities to popup on double press of the back button (using Button Mapper).
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
jeboo said:
This is correct. I went with Xposed for better compatibility across multiple h/w & s/w versions. ROM authors can likely cook it into their framework using the tutorial from the other thread :good:
Click to expand...
Click to collapse
I can confirm that this works on stock A2017G B09 with flashable Xposed. may also work with topjohnwu's Xposed but I couldn't manage to make the modded xposed installer find the xposed installation
The ROM is stock B09, from raystef66's flashable zips
Here's a screenshot where you can barely see the model below
So basically you can add that it's compatible with G-B09 somewhere
jeboo said:
2. Does this support MiFavor 5.x?
- I cannot say, it's only been tested on A2017U B32, which uses MiFavor 4.x.
[/URL]
Click to expand...
Click to collapse
Works on MF5.0 too (either SuperSu or Magisk). Only if you use the flashable xposed framework v88.2 SDK25 + xposed installer + your apk.
Thnx ! (does not work through Magisk module installing the framework. Installer error framework not installed)
works on B35
Works on B09 Nougat on A2017G, although it does not play nice when messing with screen dpi. I am currently on 500 and icons are misaligned.
WETAmod
Any issues need to be accompanied with relative info, I can't fix anything if I have no idea the module, firmware version, conflicting modules.. it'll drive me nuts if you just say something doesn't work and that's all you put
WETAmod is a control app that installs audio and ui mods over a stock system.
WETAmod, for the OnePlus 6, is now, the controller of WETA UI mods, such as 3Minit and NavBar etc. Audio mods are staying separate as independant Magisk Modules. It just makes more sense that way.
For my last 5-6 devices I've built roms based off stock firmware images, though I'm deciding this is kind of a pointless endeavor, for me anyway. Downloading and flashing a gb zip when most files are not modified is a waste of bandwidth. WETAmod is an evolution from my roms to something more compact. Existing files will be replaced and patched only where needed.
Included in the module folder..
3Minit battery - status bar + Home button
3Minit clock
Battery bar - navigation bar
Navigation bar height
Immersive modes
Audio (individual Magisk Modules)
- WETA selected audio modules
- V4a 2.3.4.0 + 2.5.0.5 + 2.6.*
- dual speaker mod
- some experimental things activated
See post #3 for operation notes
Thanks to @zhuhang (v4a), @gharrington (3Minit), @topjohnwu (magisk)
@Mentalmuso
--->
Downloads + links...
Telegram thread
t.me/WETAop6
Module Folder
https://mega.nz/#F!atFjxATC!PVM77k3NGB9jurmiN43XGw
--->
WETAmod instruction
1. Download and flash the appropriate installer zip for your firmware version.
2. Flash via TWRP (magisk modules can be flashed via magisk manager also)
3. Open WETAmod and Grant su permissions.
The app itself, is similar to rom control apps but the majority of mods are applied via shell scripts. If the page you are making selections on has an "execute" or "apply" bar on it, you need to press that for the mods to be applied. This may result in a sysui reboot, or in some rare cases a full reboot.
If you have more questions, then come visit the telegram thread. I am not the best at explanations via xda at times, and things are always evolving in my corner.
WETA Audio
Android audio. This can be a touchy subject with regards to driver and module ports from other devices. I'll be transparent here, and say this... drivers from other devices may prove useless. Though the drivers I use here, have been tested to be functional... Which is a good start I'd say, then using ears... have a perceived difference in the positive to stock audio. Use your own ears, be subjective, use or don't use this module.
--->
Mentalmuso said:
WETAmod Magisk Modules
This is a simple thread sharing modules I am using personally on DP3. While I decide what direction I am going to take with this device, I needed to be on the latest firmware with my favorite mods.
I am currently still working on the note 8 rom WETA, and am deciding whether a rom is actually something I want to do on this device considering there are already a few great options in this forum.
Thanks to @zhuhang (v4a), @gharrington (3Minit), @topjohnwu (magisk)
@Mentalmuso
--->
Click to expand...
Click to collapse
deleted i know it's a horrible idea but i wanted to give samsung expericence another try
Is this for android p only?
omar2005 said:
I am watiting for this note 8 rom
thank you
Click to expand...
Click to collapse
What?
Edit.. I have a Note 8 device.... And a Note 8 ROM. I'm not saying there is a note 8 ROM planned for this device. That would be a horrendous idea.
--->
vxkillswitchxv37 said:
Is this for android p only?
Click to expand...
Click to collapse
It is, as that is what I run as a daily driver
What is "WETA" ?
Can I use this modules on other roms?
Mar-cel said:
What is "WETA" ?
Can I use this modules on other roms?
Click to expand...
Click to collapse
It's a tag, it's a name, it's an identifier.
You can use them on any dp3 or upcoming Pie OOS based rom.
Though I'd imagine all the OOS roms once updated to pie will have these features. I'm just filling a gap.
I'm a Samsung and LG Dev mainly, that has become bored and annoyed with things surrounding those devices.
Thank you man !
Neil_Armstrong_ said:
Thank you man !
Click to expand...
Click to collapse
No sweat
Does the 3minit battery module also work with the official oreo?
cukisan said:
Does the 3minit battery module also work with the official oreo?
Click to expand...
Click to collapse
None of these will work with Oreo. Is 3minit not available anywhere? I only made these mods as I couldn't find anything for pie. Id be happy to make some Oreo versions as well.
I was sure but I wanted confirmation. I looked around but nothing for Oreo. thank you very much anyway
cukisan said:
I was sure but I wanted confirmation. I looked around but nothing for Oreo. thank you very much anyway
Click to expand...
Click to collapse
I'm on Oreo right now, and even though Pie is imminent, I'll make the 3min mods as I miss em
cukisan said:
I was sure but I wanted confirmation. I looked around but nothing for Oreo. thank you very much anyway
Click to expand...
Click to collapse
I've started adding Oreo modules to the mega folder. 3min and v4a so far
For people who require more instant gratification
Telegram thread
t.me/WETAop6
--->
So is this just straight up other modules you packaged up? Not sure I see the point.
EmRav said:
So is this just straight up other modules you packaged up? Not sure I see the point.
Click to expand...
Click to collapse
Is that a negative vibe I sense there?
I've had the op6 for just over a week, was on dp3 and made the modules for it. Because thats what I do. I didn't see any other dp3 modules out there so I thought I'd share... You know.. for the community.
What exactly are you getting at? And if you have "no point" then just move along.
Mentalmuso said:
Is that a negative vibe I sense there?
I've had the op6 for just over a week, was on dp3 and made the modules for it. Because thats what I do. I didn't see any other dp3 modules out there so I thought I'd share... You know.. for the community.
What exactly are you getting at? And if you have "no point" then just move along.
Click to expand...
Click to collapse
Nope! No negative vibe, I just see all the things you listed available on the Magisk download already so I'm wondering if there is any difference between your bundle and those. If there isn't a difference shouldn't we keep things to one source and move this to a purely discussion forum?