Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Emotion nightly Kernel Note 4 -SM-N910V
Developed by Placiano and Pafcholini
Introduction
Introducing the Emotion Revolution Roms & Kernels for Android Devices.
Emotion Rom/Kernel is a modified, aftermarket firmware/Kernel distribution few Android devices (Note 2, Note 4, HTC M7, Newman N2). Based on the Android Open Source Project , Emotion Rom & Kernel is intended to increase performance and stability over Android-based Devices released by sellers, for example, Samsung, HTC and so forth. Emotroid additionally offers a mixed bag of features & improvements that are not presently found in stock variants of Android.
*** Disclamer***
Your warranty is now void.
We are not responsible for any damage or problems you may have!
YOU are choosing to make these modifications.
Click to expand...
Click to collapse
Thread IndeX
POST 1: Kernel Information, Changelog, Credits,Screenshots
POST 2: Synapse, Recommended settings, FAQ, etc.
POST 3: Know/Reported issues
Request new features here
Features:
Based on Samsung Open Source XXU1BOB4
Compiled with Toolchain Linaro GCC 4.9.3 2015.02 Cortex A15
Linux version 3.10.40
OC/UC -> 3072MHz / 268MHz
PowerSuspend Driver
Intelli-Plug V4.0
KSM enabled
Sweep2wake
Simple GPU Algorithm
Voltage Control
Intelli-Thermal
KCAL - Advanced color control
Led Control
CRC Settings
Advanced TCP control
S-View flip cover hack
Selinux Permissive
Sched: LOAD_FREQ (4*HZ+61)
Reduced wakelocks
Frandom number generator
Synapse full support
Governors: interactive_pro, intelliactive, bluactive, conservativex, alucard,darkness, nightmare, smartassV2, ondemandplus, umbrella_core, yankactive, dancedance, bioshock, lionhearth, conservative, interactive, ondemand,powersave, userspace, performance
I/O Scheldures: bfq, vr, fiops, zen, fifo, sio, test-ioshed, cfq, row, deadline, noop
Click to expand...
Click to collapse
April- 14 -2015 nightly r9
-Back to Linux 3.10.40 (For now, we are working to bring stable 3.10.73)
-Added Intelli-thermal v3.0
-bcmdhd4358: filter multicast packages while suspended
-fs/namei.c: fix potential memory leak in path_lookupat
-pinctrl: msm: fixed potential NULL pointer dereference
-usb: ks_bridge: by default debugging is disabled
-slub: fix kmem_cache_shrink return value
-mm: slub: fixed format mismatches in slab_err() callers
-power:Enable/Disable power collapse after camera open
-Implemented CPU Core Control by andip71
-tick: don't update idle time if cpu offline
-msm: kgsl: Only wake GPU on multitouch events
-Interactive: don't boost cpu if already boosted
-rtc: qpnp-rtc: Sets RTC time correctly
-rtc: qpnp-rtc: Set alarm control register properly
-Added Mobile Storage Analyzer
-soc: mbhc: Fix ID Tech card reader detection
-power: catch wake-up requests in suspend_again
-pinctrl: msm: prevent bogus wake up from suspend
-asoc: wcd9xxx: Improved headset detection
-Implemented Motorola MSM memcpy enhancements "memutils" (Faster memcpy performance for Krait)
-Improved Memutils
-Added CIFS as module
-Adde NTFS as module
-ASoC: msm: qdp6v2: handle proxy read failure
-ASoC: msm: qdsp6v2: Fix timestamp query during gapless transition
-mmc: core: Update PON (Power Off Notification) based on the system state
-mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support
-netfilter: IDLETIMER: fix invalid deference of timer
-Fixes and improvements in Synapse
-Added CPU Binning (pvs information) Synapse> CPU VOLTAGE
-Added CPU core control in Synapse> CPU DRIVERS
-For more info check our Github
March- 27 -2015 nightly r8
-Linux update to 3.10.71
-Powesuspend updated to 1.7
-Intelli-plug updated to 4.0
-OC/UC -> 3072MHz / 268MHz
-Added Hardlimit Control
-Added new governors
-Addeded new scheldures
-Added memcopy & string use glibc version
-Added quickwakeup driver (improve battery life)
-Optimized Kernel Samepage Merging (KSM)
-deadline: Optimized for non-rotational
-mm: Clear page active before releasing pages
-ARM: 8119/1: crypto: sha1: add ARM NEON implementation
-ARM: 8120/1: crypto: sha512: add ARM NEON implementation
-ARM: crypto: add NEON accelerated XOR implementation
-ARM: add support for kernel mode NEON and only allow kernel mode neon with AEABI
-Fixed failure to enter PS mode while roaming
-Sched: Set MC (multi-core) sched domain's busy_factor attribute to 1
-Disabled add_random for more performance on SSD's
-tcp: enabled tcp fast open functionality (franciscofranco)
-For more info check our Github
March- 5 -2015 nightly r7
-Added KCAL - Advanced color control (Thanks to @savoca for his great job) check this thread for more info
March- 3 -2015 nightly r6
-Based on XXU1ANK4 (KitKat version) and compatible with "F,G,T,V,W8"
-Based on XXU1BOB4 (Lollipop version) and compatible with "F"
-Lollipop version has all the features except mdnie control and S-View hack
-Kernel compiled with Linaro Toolchain 4.9.3 2015-02
-FauxSound updated to 3.6
-Fixed some issues in FauxSound and Synapse
-cpufreq: Introduced new relation for freq selection Introduce CPUFREQ_RELATION_C
-Interactive Governor: Use CPUFREQ_RELATION_C
-Added Gentle fair sleepers (Synapse -> KERNEL TWEAKS)
-Enabled Kernel SamePage Merging (KSM) (Synapse -> KSM)
-Added key disabler (Synapse-> SCREEN/MISC)
-Added userspace vibration strength control (Synapse-> SCREEN/MISC)
-Changed some stuff in Synapse
-Reverted some commits
-Another minor changes
January- 27 -2015 nightly beta r5
-FauxSound implemented
-FauxSound in Synapse
-Added high performance mode in Synapse->Sound
-Fixed battery drain on wifi (My fault)
-Reverted another commits
January- 16 -2015 nightly r4
-Fixed cpu voltage control (No more 0MHz frequency in cpu voltage table)
-ASoC: wcd9xxx: use hwdep node for codec calibration
-ASoC: wcd9320: use hwdep nodes to get calibration
-ASoC: wcd9xxx: Changes for High performance mode
-ASoC: wcd9xxx: Change PA on and VDDIO switch sequence
-ASoC: wcd9xxx: Avoid micbias glitches during audio playback
-In conclusion better quality sound on headsets
-Sched/fair: reduced latency
-Decreased DHD_PACKET_TIMEOUT_MS to 250 ms (Before 500ms)
-Drecreased time to enter sleep
-Net: wireless: Increased scan entry expiration to fit new scan time
-PM: devfreq: Use high priority workqueue
-Msm: kgsl: Report correct GPU frequency in sysfs
-Some minor changes
January- 11 -2015 nightly r3
-Added Frandom as module and set by default (Synapse>I/O>Frandom) "For more info check this"
-Network speed tweak
-Reduced wakelocks "wlan_rx_wake" and "wlan_ctrl_wake"
-dtsi: realigned voltages with userspace values (Thanks to twistedumbrella)
-cpu-boost more performance (Thanks to franciscofranco)
-sched: LOAD_FREQ (4*HZ+61) "For more info check this"
-Interactive governor imported from the Nexus 6 (No more lag on interactive)
-Added bluactive and interactive_pro governors
-Reverted some changes that made the kernel laggy in some cases.
-Selinux set to permissive by default
-Gpu: msm: for higher priority you want to use nice level of -7
-Now you can change the governor tunables from Synapse (Issue fixed) (Thanks for the tip to AndreiLux)
-Synapse shows all the available gpu governors (Thanks to my friend Friedrich!)
-Cleaned some things in Synapse
-Other minor changes
January- 4 -2015 nightly r2
-Fixed Ondemand governor
-mm: slub: Default slub_max_order to 0 (Improved performance)
-Increased io performance
-writeback: fix occasional slow sync
-Fixed min frequency (Finally!)
-msm: Fix high load average from uninterruptible waits
-Cpu boost sysfs to enable/disable it (Synapse>cpu drivers)
-S-View hack (Twistedumbrella) enable/disable (Synapse>miscellaneous)
-Minor fixes
January- 1 -2015 nightly r1
-Based on Samsung Open Source N910FXXU1ANIE
-Compiled with Toolchain Linaro GCC 4.9.3 2014.12 Cortex A15
-PowerSuspend Driver
-Intelli-Plug V3.9
-Stereo Call Recording Support
-cpufreq_limit: don't override cpu min frequency
-Fast Charge V1.2
-Sweep2wake
-Simple GPU Algorithm
-Sysfs interface to Enable/Disable Logger Android (Default disable)
-Voltage Control
-Intelli-Thermal V1
-mDNIe Hijack control
-Advanced TCP control (westwood default)
-Sysfs interface to Enable/Disable CRC
-Dynamic Fsync Control V1.5
-Added Intelliactive, Smartmax and SmartassV2 governors
-Led Control
-Panel Color Control
-mDnie mode adapter for Synapse
-Selinux Enforcing/Permissive
-Synapse Support
Click to expand...
Click to collapse
Installation instructions
You need to have TWPR, CWM o Philz Recovery.
Download the last kernel
Reboot in recovery mode
Make backup (recommended)
Flash the zip
Downloads
Strictly No Mirrors Please. In the event that you need to make one ask us first with purpose behind what valid reason.
Current Version
After flash the kernel (LL version) go to play store and download Synapse apk.
App to control your display : Color Control
Emotion nightly r9 LL (Mediafire)
Old version
Emotion nightly r8 LL (Mediafire)
Nadia nightly r7 LL (Mediafire)
Nadia nightly r7 KK (Mediafire)
Nadia nightly r6 LL (Mediafire)
Nadia nightly r6 KK (MEGA)
Nadia nightly beta r5 (Mediafire)
Nadia nightly r3 (Mediafire)
Nadia nightly r4 (MEGA)
Nadia nightly r4 (AndroidFileHost)
Nadia nightly r3 (Mediafire)
Nadia nightly r3 (MEGA)
Nadia nightly r3 (AndroidFileHost)
Nadia nightly r2 (Mediafire)
Nadia nightly r2 (MEGA)
Nadia nightly r2 (AndroidFileHost)
Nadia nightly r1 (Mediafire)
Nadia nightly r1 (MEGA)
Nadia nightly r1 (AndroidFileHost)
Click to expand...
Click to collapse
Source code:
Emotion kernel Github
Thanks To/Credits
Andip71, AndreiLux, apb_axel, Civato, Christopher83, DerTeufel, Faux123, Ffolkes, Flar2, Franciscofranco, Franlov, Friedrich420, Gokhanmoral, Infernum, LoungeKatt (TwistedUmbrella), savoca, _Sofos_, Vanito, Yank555.lu, ZaneZam.
I hope I have not forgotten anyone!
Hit the "thanks" button if you like our work.
You can follow new updates here (Spanish)
Recommended settings & FAQ Synapse and all available options:
- LIVE STATISTICS: Time in states, Uptime,etc.
- CPU - GOV: cpu scaling, cpu governor and governor tunables.
- CPU voltage: separate frequency voltage.
- GPU: GPU scaling min/max frequency, GPU governor, Simple GPU Algorithm.
- I/O: schedulers, internal storage read-ahead, externalSD read-ahead, Frandom Module, Scheldure Tunables Internal/External
- CPU DRIVERS: PowerSuspend and Intelli-Plug
- THERMAL: Intelli-Thermal Control
- MISCELLANEOUS: Dynamic FSYNC Driver, Logger Mode, CRC Settings, S-View bypass, Selinux Status, Optimize Database.
- BATTERY: Live Statistics and Fast Charge
- MDNIE/SCREEN: Panel Control, mDNIe Mode and mDNIe Mode Hijack
- LED: Led Control
- SCREEN WAKE CONTROL: Sweep2Wake Control
- KERNEL TWEAKS: low memory killer, kernel entropy, panic and panic on oops.
- NETWORK: tcp congestion control, hardering the TCP/IP stack to SYN attack,ignore pings,etc.
- VM-FS: dirty radio, swappiness,etc.
- BUILD.PROP: Build.prop Tweaks
- LOGS: Clearn Synapse, Logcat and Dmseg
- INFO-REBOOT: info about the kernel, reboots,etc.
Click to expand...
Click to collapse
Balance between performance and battery
Quote:
Above is what I use personally. MAY NOT be optimal for all. Share your settings.
CPU frequency: 2649MHz/300MHz
CPU governor: Intelliactive or Bluactive for performance/ Interactive for battery
CPU voltaje: -25uV ((Be careful!! If you low voltages much you can get bootloop or battery drain.)
GPU: default values
I/O schedulers: row for both
PowerSuspend: hybrid hook
MPDECISION for performance/ Intelli-Plug for battery
Intelli-Thermal: enabled
MISCELLANEOUS: fsync enabled, logger mode disabled, crc disabled (you choice), Selinux Permissive
TCP: westwood for both
Click to expand...
Click to collapse
Aukhan recommended settings
1.
2.
F.A.Q
Can I flash this kernel on Note 4 SM-N910C or other variant?
No, you can not. This kernel is only for SM-N910F, SM-N910G, SM-N910T and SM-N910W8.
When I switch to Ondemand governor I noticed that cpu-boost is disabled.
Exactly, Ondemand and cpu-boost doesn't work well together. When you switch to Ondemand governor cpu-boost will be disabled automatically. Don't re-enable cpu-boost if you are using Ondemand governor. (Synapse>CPU DRIVERS)
Which app can control this kernel?
By default, the kernel is controlled by Synapse, but you can use the app that you like (Trickster Mod, Kernel Tweaker, etc.).
I flashed the kernel and Synapse says: "No support UCI detected".
Reflash the kernel, since it was a bad installation and Synapse does not detect the scripts.
After flashing the kernel lost root what to do?
In case you loose root just flash SuperSU
Any recommended settings to follow using Synapse?
At the beginning of the second post.
After flash the kernel some apks give me FC.
Go to Google Play Store and reinstall those apks.
From where can I remove int.d script?
Go to /system/etc/init.d using any root based file manager and delete.
Note: There is an important one related to superSU and if you remove it by mistake you're gonna have trouble with root permissions.
My device doesn't show any reaction to undervolting (battery life is same as before) or gets unstable even on light undervolting?
Use DVFS disabler Module(standalone) (dynamic voltage and frequency scaling), this feature was kept in touchwiz for benchmark boosting purposes and will conflict with any undervolting and custom governors because it scales the voltages and frequency on regular intervals and is framework integrated, so gets a higher priority than kernel based voltage and scaling controls.
For people who don't know what is DVFS please refer Wikipedia.
Min/Max frequency don't stick?
If your frequency settings don’t stick, it's because on certain Qualcomm devices, there are certain system services (thermald/mpdecision/project butter) or kernel service that rewrite frequency settings based on current thermal status and/or touch input.
I made a logcat but my file is empty. How I can "fix" it?
By default Android logger is disable. Go to Synapse > MISCELLANEOUS and enable Logger Mode.
What is it PowerSuspend?
This new powersuspend PM kernel driver is a replacement for it and existing early_suspend drivers. It should give better battery life.
What is it Intelli-Plug?
Intelliplug is a replacement for mp decision. Intelli-Plug is Faux123 open source solution to Qualcomm's closed source mpdecision. Intelli-Plug is disable by default. It conflicts with mpdecsion, so is HIGHLY recommend turning off mpdecision when using intelli-plug! (If you use Synapse the change is automatic. If you enable Intelli-plug mpdecision will turn off).
What is it Intelli-Thermal?
an intelligent MSM thermal throttling kernel driver designed to replace the
closed sourced thermald(aemon) from Qualcomm.
What is it Frandom?
Frandom is a kernel random number generator, which is 10-50 times faster than what you get from /dev/urandom. And it uses very little (/dev/frandom) or none (/dev/erandom) of the kernel's entropy pool, so it is very useful for applications that require a handy source for lots of random data.
What is it CRC?
CRC is a mechanism aiming to prevent data corruption when is enabled (reduce the performance around 30%). So if you disable it improve the performance but your data can be corrupted. Use it at your risk.
/sys/module/mmc_core/parameters/crc
Know/Reported/Fixed issues Know issues
1. Synapse doesn't show CPU governor tunables.
I'm trying to fix it. FIXED
2. Sometimes Synapse (and others kernel control apks) show that the min frequency is 1190MHz (or other frequency).
Just cancel it. FIXED
3. Ondemand doesn't work well. FIXED
Thanks for the report @Vangelis13
Any other Issues you may Report us and we will fix it
Reserverd
Currently its confirmed that its runing fine on Developer Edition by @manbat thanks to him.
If anybody else has tried it on a non developer Edition please let us know since we do not have a V Variant Device We wont be able to test.
Kindly report.
First! Sweet my first...first.lol
Have been running for a few days on my DE...runs great !!!
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
manbat said:
Have been running for a few days on my DE...runs great !!!
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
Click to expand...
Click to collapse
Glad to know it's running rock solid.
Working great here. Only thing I noticed is that when battery is above 90% the led flickers very quickly. May be an interaction with Light flow.
JDevil said:
Working great here. Only thing I noticed is that when battery is above 90% the led flickers very quickly. May be an interaction with Light flow.
Click to expand...
Click to collapse
=======
No issues with LEDs here....
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
JDevil said:
Working great here. Only thing I noticed is that when battery is above 90% the led flickers very quickly. May be an interaction with Light flow.
Click to expand...
Click to collapse
Are you using any LED apps? I don't see any issues.
This isn't built using VZW source is it?
bobbarker2 said:
This isn't built using VZW source is it?
Click to expand...
Click to collapse
No...but everything works. Source is listed in OP.
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
R6_KK is up... http://forum.xda-developers.com/showthread.php?p=57886425
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.5.0.trltevzw
manbat said:
R6_KK is up... http://forum.xda-developers.com/showthread.php?p=57886425
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.5.0.trltevzw
Click to expand...
Click to collapse
I'll update the OP tonight.
Sent from my SM-N910F
Thread updated!
After flash the kernel go to play store and install Synapse apk.
Enjoy it!
Changelog
March- 3 -2015 nightly r6
-Based on XXU1ANK4 (KitKat version) and compatible with "F,G,T,V,W8"
-Kernel compiled with Linaro Toolchain 4.9.3 2015-02
-FauxSound updated to 3.6
-Fixed some issues in FauxSound and Synapse
-cpufreq: Introduced new relation for freq selection Introduce CPUFREQ_RELATION_C
-Interactive Governor: Use CPUFREQ_RELATION_C
-Added Gentle fair sleepers (Synapse -> KERNEL TWEAKS)
-Enabled Kernel SamePage Merging (KSM) (Synapse -> KSM)
-Added key disabler (Synapse-> SCREEN/MISC)
-Added userspace vibration strength control (Synapse-> SCREEN/MISC)
-Changed some stuff in Synapse
-Reverted some commits
-Another minor changes
I'm confused why there is a Lollipop version? Is that not for VZW?
Mibuix0r said:
I'm confused why there is a Lollipop version? Is that not for VZW?
Click to expand...
Click to collapse
My Bad I actually though LL was released for this device, I've made the changes now.
Kernel updated!
March- 5 -2015 nightly r7
-Added KCAL - Advanced color control
I'll update the OP later meanwhile you may download it from here
Nadia nightly r7 kk - http://www.mediafire.com/download/d2v2p5l68t4laz8/Nadia-nightly-r7-KK-SM-N910F-G-T-V-W8.zip
Color control - http://www.mediafire.com/download/xj8za53ia2njico/re.codefi.savoca.kcal-v1.1.apk
Sent from my SM-N910F
Sent from my SM-N910F
New Color setting which looks more better try this and post your results.
Make sure you set your Display mode from Settings to Basic and try this
Thanks to @Psycho_666
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BeliveKernel is a fully optimized kernel, with commits that will make the operation of your device something amazing, is compiled with SaberMod 4.7 which will give you a unique experience, with many more optimizations, constantly being updated on Github, performance is unique, with optimizations change your phone. BeliveKernel will offer many improvements on your phone, from better battery management to better manage processes. Thanks to BeliveKernel you will have the opportunity to give your device one more than incredible life. Enjoy BeliveKernel on your device.
Krizthian not liable for damage or loss of your device. Any claims will not be accepted.ONLY FOR CUSTOM ROMS, DON'T FLASH IN STOCK.
THE PERFORMANCE ON BELIVEKERNEL:
BeliveKernel performance was well done as you can see in the capture AnTuTu score, which you can see that the performance achieved almost equal to that of a Motorola Moto G 2013, almost reaching the 18,000 points. Therefore in performance issues BeliveKernel was made for you, BeliveKernel also has Intelliplug of @ faux123 integrated, which helps to better management of the CPU. other than BeliveKernel it incorporates optimizations as Graphite and is compiled with SaberMod 4.7.
-Features:
-Builded with SaberMod GCC 4.7.
-SELinux it's in PERMISSIVE.
-CRC check it's disabled.
-Kernel version it's 3.4.109(With the last Linux patches).
-Reclaimed RAM from Loggers.
-WiFi it's FULLY WORKING IN ALL ROMS.
-Pipe flag it's ENABLED.
-Lower Swappiness.
-Slub OPTIMIZED.
-Apply_Slack it's OPTIMIZED.
-Added optimized ARM RWSEM algorithm.
-Clock vote it's updated for improved performance.
-Lionheart governor.
-Smartmax governor.
-Wheatley governor - Removed in RELEASE 08.
-Xperience governor.
-Intelliactive governor - Removed in RELEASE 08.
-Conservative governor it's enabled.
-user_policy min/max is exported.
-Ext4 optimized.
-FEAT_PERCPU clockevent flag it's added.
-Battery check interval is increased from 5 to 15 seconds.
-Ratelimit is useles in irq.
-increased bdi_min_ratio to 5.
-add_random it's disabled.
-Optimized Sfck Compression.
-Optimized AES & SHA1 routines.
-Powersuspend it's added.
-Support for more ramdisks.
-Reclaimed virtual memory from each subsystem.
-Improve tweaks for responsiveness on CFS.
-GRAPHITE - MORE PERFORMANCE
-Optimize for size it's ENABLED.
-Kernel compressed with XZ.
-Added a Simple GPU Algorithm.
-Introduce tweaks for network.
-Cleaned up some dead code.
-Added API to allow limiting of min and max cpu frequencies.
-Lowered latency in VM to reduce lags.
-Optimized square root algorithm.
-Added a field to store names for private anonymous memory.
-Optimized memory allocation in check_partition().
-Disabled GFSleepers for ui performance.
-Deadline I/O tweaked for better performance on android.
-Allow zero ms latency in deadline.
-SIO I/O Scheduler - Removed in RELEASE 08.
-Disabled kernel-side mpdecision.
-Added fsync on/off support.
-Enabled fsync by default.
-Added missing return if fsync is disabled from userspace.
-Merged tweak tunables.
-Improved performance for FIOPS I/O.
-Improved tweaks for interactive governor.
-More faster Wakelock.
-Increased readahead to 1024kb.
-Improved tweaks from menuconfig.
-Intelliplug 3.7.
-Improved frandom support.
-Don't call writeback_set_ratelimit().
-Fix writeback cache thrashing.
-Speedup /proc/net/unix.
-Fix occasional slow sync(1).
-Fix race that cause writeback hung.
-Removed compressed copy from zram in-memory.
-Added performance boost option for Intelliplug.
-Added perf_boost sysfs entry and clean up permissions for Intelliplug.
-Enabled CONFIG_KERNEL_MODE_NEON.
-Introduced FastCharge..
-Enable ARCH_POWER.
-Added support for read_iter and write_iter for Ext4.
-Optimize defaults for KSM.
-Fixed dirty_balance_reserve.
-Sync on thread migration optimizations.
-Added hotplug enable toggle.
-Send events one packet at a time.
-Asynchronous I/O latency to a solid-state disk greatly increased.
-Optimize build_sched_domains().
-Lags are reduced absoluty!
-Screenshots:
-Changelogs:
-RELEASE 01:
-Initial Release(With all features mentioned previously).
-RELEASE 02:
-Lionheart governor added.
-Smartmax governor added.
-Optimized AES & SHA1 routines.
-Improve performance on Ext4.
-Powersuspend added.
-Optimize Sfck Compression.
-Disable add_random.
-Increase bdi_min_ratio to 5.
-irq: ratelimit is useless.
-Increase battery check interval from 5 to 15 seconds.
-Add FEAT_PERCPU clockevent flag .
-Export user_policy min/max.
-RELEASE 03:
-Add support for more ramdisks.
-Reclaimed virtual memory from each subsystem.
-Improve tweaks for responsiveness on CFS.
-INCLUDE GRAPHITE - MORE PERFORMANCE
-Enable optimize for size.
-RELEASE 04:
-Kernel compressed with XZ.
-Added a Simple GPU Algorithm.
-Introduce tweaks for network.
-Cleaned up some dead code.
-Added API to allow limiting of min and max cpu frequencies.
-RELEASE 05:
-Lowered latency in VM to reduce lags.
-Optimized square root algorithm.
-Added a field to store names for private anonymous memory.
-Optimized memory allocation in check_partition().
-Disabled GFSleepers for ui performance.
-Deadline I/O tweaked for better performance on android.
-Allow zero ms latency in deadline.
-Added Wheatley governor.
-NOW THE KERNEL IT'S BUILDED WITH SABERMOD 4.7.
-RELEASE 06:
-SIO I/O Scheduler.
-Disabled kernel-side mpdecision.
-Added fsync on/off support.
-Enabled fsync by default.
-Added missing return if fsync is disabled from userspace.
-Merged tweak tunables.
-Improved performance for FIOPS I/O.
-Improved tweaks for interactive governor.
-More faster Wakelock.
-Increased readahead to 256kb.
-RELEASE 07:
-Change numbers in FIOPS I/O Scheduler.
-Improved tweaks from menuconfig.
-Added Intelliplug 3.7.
-Readahead increased to 1024Kb and 32kb.
-Improved frandom support.
-Introduced Xperience governor by @TeamMex
-Introduced IntelliActive governor.
-Reduced swappiness from 45 to 40.
-Don't call writeback_set_ratelimit().
-Fix writeback cache thrashing.
-Speedup /proc/net/unix.
-Fix occasional slow sync(1).
-Fix race that cause writeback hung.
-Removed compressed copy from zram in-memory.
-RELEASE 08:
-Patched to 3.4.109.
-Added performance boost option for Intelliplug.
-Added perf_boost sysfs entry and clean up permissions for Intelliplug.
-Removed Wheatley Governor.
-Removed SIO I/O.
-Enable CONFIG_KERNEL_MODE_NEON.
-Introduce FastCharge.
-Enable ARCH_POWER.
-Removed IntelliActive Governor
-Added support for read_iter and write_iter for Ext4.
-Optimize defaults for KSM.
-Fixed dirty_balance_reserve.
-Sync on thread migration optimizations.
-Added hotplug enable toggle.
-Send events one packet at a time.
-Asynchronous I/O latency to a solid-state disk greatly increased.
-Optimize build_sched_domains().
-RELEASE 09:
-Reduced swappiness to 30.
-Reduced lags (Really, i love this change).
-Optimized Sfck Compression.
-Downloads:
BeliveKernel FOLDER - Download the most recent release .
-How to install:
-Boot in TWRP Recovery.
-Flash the ZIP(without wipes).
-Reboot your phone.
-Enjoy BeliveKernel .
-Issues:
-In OctOS ROM the autorotation doesn't work .
-Sources:
-BeliveKernel.
-CM Kernel by @squid2
-Optimus Kernel by @Flashhhh.
-UltraKernel by Anderson Alvarez.
-FrancoKernel by Francisco Franco.
-DonkeyKang Kernel by Fermasia.
-SrFarias Kernel by Eric Farias.
-Pink Kernel by Pinkflozd.
-Thanks to:
-Flashhhh(FOR THE BEST COMMITS) THANKS! THANKS! THANKS!
-squid2(FOR THE CM KERNEL)
-Motorola(FOR THE SOURCES)
-SrFarias.
-Anderson Alvarez.
-NV-Dev.
-YoshiShaPow.
-Faux123.
ENJOY BELIVEKERNEL
XDA:DevDB Information
BeliveKernel - Belive in the POWER, KERNEL for the Moto E 2015 3G(otus)
Contributors
Krizthian, Flashhhh
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-08-16
Last Updated 2015-08-16
Good work brother
Good work @Krizthian
Excellent work brother!
May be will build kernel for lte model?
Very good kernel but the autorotation fails v:
Enviado desde mi Moto E usando XDA Forums Pro.
BeliveKernel R02 - RELEASED!.
Changes:
-Lionheart governor added.
-Smartmax governor added.
-Optimized AES & SHA1 routines.
-Improve performance on Ext4.
-Powersuspend added.
-Optimize Sfck Compression.
-Disable add_random.
-Increase bdi_min_ratio to 5.
-irq: ratelimit is useless.
-Increase battery check interval from 5 to 15 seconds.
-Add FEAT_PERCPU clockevent flag .
-Export user_policy min/max.
You can download the new release HERE.
Greetings and Enjoy the POWER.
Thanks for added new governors, good work.
Sent from my Moto E using XDA Free mobile app
Make for stock working
Sent from my MotoE2 using xda app-developers app
Hello I found that apart from auto-rotation does not work the camera. As in ROM oct-l
Enviado desde mi Moto E usando XDA Forums Pro.
orbirixx said:
Hello I found that apart from auto-rotation does not work the camera. As in ROM oct-l
Enviado desde mi Moto E usando XDA Forums Pro.
Click to expand...
Click to collapse
What ROM have installed?
Sent from my condor using XDA Free mobile app
TechnoAnder said:
What ROM have installed?
Sent from my condor using XDA Free mobile app
Click to expand...
Click to collapse
there says, OctOS- OCT-L
is it works on stock rom? only in custom roms
Mahesh8348 said:
is it works on stock rom? only in custom roms
Click to expand...
Click to collapse
Only in Custom Roms...
Greetings.
BeliveKernel RELEASE 03 - RELEASED!
Changes:
-Add support for more ramdisks.
-Reclaimed virtual memory from each subsystem.
-Improve tweaks for responsiveness on CFS.
-INCLUDE GRAPHITE - MORE PERFORMANCE
-Enable optimize for size.
You can download the new release HERE.
Greetings and Enjoy the POWER.
OTG support?
Is it possible to get OTG support from this kernel????
BeliveKernel RELEASE 04 - RELEASED!
Changes:
-Kernel compressed with XZ.
-Added a Simple GPU Algorithm.
-Introduce tweaks for network.
-Cleaned up some dead code.
-Added API to allow limiting of min and max cpu frequencies.
You can download the new release HERE.
Greetings and Enjoy the POWER.
WLAN Driver Size
Hello Krizthian,
Great work on the kernel! One thing I've noticed is that your pronto WLAN kernel module is huge (40 MB). This is caused by debugging symbols being present in the driver. You can shrink it by adding the following step to your build process:
Code:
make -j10 modules_install INSTALL_MOD_PATH=your_directory_of_choice INSTALL_MOD_STRIP=1
This will place a stripped kernel module inside the directory you choose. Using the stripped kernel module will greatly reduce the size of the module (to less than 1/10th). You can take a look at my standalone kernel build script here: https://github.com/sultanqasim/android_kernel_motorola_otus/blob/flashable_cm-12.1/build_cwm_zip.sh
Cheers!
squid2 said:
Hello Krizthian,
Great work on the kernel! One thing I've noticed is that your pronto WLAN kernel module is huge (40 MB). This is caused by debugging symbols being present in the driver. You can shrink it by adding the following step to your build process:
Code:
make -j10 modules_install INSTALL_MOD_PATH=your_directory_of_choice INSTALL_MOD_STRIP=1
This will place a stripped kernel module inside the directory you choose. Using the stripped kernel module will greatly reduce the size of the module (to less than 1/10th). You can take a look at my standalone kernel build script here: https://github.com/sultanqasim/android_kernel_motorola_otus/blob/flashable_cm-12.1/build_cwm_zip.sh
Cheers!
Click to expand...
Click to collapse
Thanks @squid2 try to apply this in some future release.
Greetings.
BeliveKernel RELEASE 05 - RELEASED!
-Lowered latency in VM to reduce lags.
-Optimized square root algorithm.
-Added a field to store names for private anonymous memory.
-Optimized memory allocation in check_partition().
-Disabled GFSleepers for ui performance.
-Deadline I/O tweaked for better performance on android.
-Allow zero ms latency in deadline.
-Added Wheatley governor.
-NOW THE KERNEL IT'S BUILDED WITH SABERMOD 4.7.
You can download the new release HERE.
Greetings and Enjoy the POWER.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
The kernel is based off latest sources from Samsung and is compatible with all roms . Over stock kernel this kernel possesses following enhancements
Insecured
adb runnable as root
init.d support
Fsync On/Off switch.
Introducing SuperCharge control 1.0 - A driver to control charging current for both AC and USB wholly written by me.
Dynamic Fsync Control - A driver originally written by faux123- Disables Fsync when phone is being used causing significant IO boost.
Built Using GCC-4.8 by Google.
Frandom driver- Fast Kernel Number Generator..
Add support for CPU Voltage Control
Overclocked to 1.4 Ghz
Reduced VFS cache pressure for better battery
Upstream update to 3.10.104
Upstream ZRAM with lz4 compression
Rebase zram and zsmalloc from 3.15
Support for crc-toggle..
Wifi PM Toggle
Now powered by AROMA Installer.
Support for Gentle fair sleeper toggle.
SELinux set to permissive
Automatic busybox installation
Lock initial TCP window size to 64k (Improves network ping and output)
Improved filesystem mounting flags - NOATIME and NODIRATIME
IOScheduler
Disabled CRC check in MMC for 30% extra performance with IO
block: Added SIO IOScheduler
block: Add BFQ IOScheduler
block: Add fiops scheduler
Faux Sound Control 2.0 - A sound hack driver by faux123 ported to sprd codecs by me
Uses live Ramdisk patching during flashing, so need not worry about ROMs on which you are flashing on.
Optimized square root algorithm
Governors enabled: ondemand, interactive.
IntelliPlug- Great balance between battery life and performance
Optimizations to SLUB memory allocator
Disabled MMC CRC check for extra 30% boost in IO
zRAM compression algorithm
Optimized Console FrameBuffer for upto 70% increase in Performance.
Support for ARCH_Power to reduce Power-Consumption and increase Battery-Life.
Kernel Samepage Merging
F2FS Support ( Import from Motorola Source 7.0 Nougat )
Enabled arch power
Support for Larch Power feature (should improve Battery-Life).
Mali GPU cache Optimizations ( Thanks to varun.chitre15 )
Mali: Increase L2 cache max read size ( Thanks to varun.chitre15 )
Mali: Disable state tracking
Mali: Reduce GPU utilization timeout
Mali: increase kernel memory buffer size
Added bunches of TCP Congestion Algorithm
Aggressive multicore power savings
ARM: Removed various debug traces
Downloads
Vegito 5.8
Announcement
Introducing my own app to update my kernels within 1 click.
Get it from play store - Vegito Kernel Updater
Please Rate or give your feedback for this app.
Google+ Community (Beta testing and releases)
https://plus.google.com/u/0/communities/107248021342303532678
INSTRUCTIONS
Just flash the zip in twrp and you are good to go!
Source
https://github.com/nikitsharma15/Vegito_core33g
Reserved
Vegito 5.5 - 16th April 2017
Code:
- Introducing SuperCharge control 1.0 - A driver to control charging current for both AC and USB wholly written by me.
- Compatibility with Lineage OS 14.1
- Upstream update to 3.10.104
- Reduced VFS cache pressure for better battery
- Add support for CPU Voltage.
Vegito 5.2 - 1st March 2017
Code:
- Removed unnecessary hotplug drivers
- Removed fast charging ( Actually its not working for our device o.O )
- Fsync On/Off switch.
- Built Using Linaro- 5.2 Toolchain along with Cortex A7 compiler optimizations.
- Frandom driver- Fast Kernel Number Generator
- Now powered by AROMA Installer.
- Support for Gentle fair sleeper toggle.
- Lock initial TCP window size to 64k (Improves network ping and output)
- Improved filesystem mounting flags - NOATIME and NODIRATIME
- Huge update to kernel.org mainline 3.10.102
- Faux Sound Control 2.0 - A sound hack driver by faux123 ported to sprd codecs by me
- Uses live Ramdisk patching during flashing, so need not worry about ROMs on which you are flashing on.
- Optimized square root algorithm
- IntelliPlug- Great balance between battery life and performance
- Optimizations to SLUB memory allocator
- Disabled MMC CRC check for extra 30% boost in IO
- F2FS Support ( Import from Motorola Source 7.0 Nougat )
- Mali GPU cache Optimizations ( Thanks to varun.chitre15 )
- Mali: Increase L2 cache max read size ( Thanks to varun.chitre15 )
- Mali: Disable state tracking
- Mali: Reduce GPU utilization timeout
- Mali: increase kernel memory buffer size
Vegito 5.0 - 30th Oct 2016
Code:
- Added bunches of TCP Congestion Algorithm
- Added ZEN Scheduler support
- Some other changes which I do not remember.
Vegito 4.0 - 1st Sep 2016
Code:
- Updated now kernel supports in cm12.1
- Added bunches of Governors
- Added IOScheduler
- Added CPU Hotplug drivers from qualcomm devices ( Ported by doesntexits )
- Added USB Fast Charge Support
- Support for the new PowerSuspend algorithm
- Support for Swap and zSwap
Vegito 3.0 - 1st July 2016
Code:
- 1600 Mhz Overclock.
- Disable some debugging
Vegito 2.0 - 6th June 2016
Code:
- Added Governor
- Compiled Using GCC 4.8 toolchain
Vegito 1.0 - 2nd April 2016
Code:
- Initial release
Does it support loop devices as I want to install Debian ?!☺
Nope it wont
nice @Dreamstar . keep it up
its working fine thanx
seems so good ,when i rooted my phone was so slow but now it is perfect , thank you
Working fine. Thanks dreamstar.
thanks
worx on g360bt?
I have already rooted my phone. Do again I have to root?
No Need @dRbXDA
Dreamstar said:
No Need @dRbXDA
Click to expand...
Click to collapse
Thanks
Dreamstar said:
Today, I present you with my one of my latest works
Vegito Kernel ( Stock Kernel With Basic Features) For Samsung Galaxy Core Prime G360H.
Modified Kernel
Features :
1 .Compiled From Source Samsung Open Source
2. Swap Support
3. Init.d Support
4. Insecure Boot
5. Easy Root (complimentary to Insecure Boot) - You probably don't need root access to flash zips.
6. Debuggable by default.
7. Smooth Performance
Download :
Vegito Kernel
Click to expand...
Click to collapse
Does the kernel support OTG?
please add some features. like_ 1. add governors 2. add cpu frequency.
---------- Post added at 09:11 AM ---------- Previous post was at 09:08 AM ----------
dRbXDA said:
Does the kernel support OTG?
Click to expand...
Click to collapse
i think to support otg , it needs hardware chip in mobile. which h
asnot in core prime.
i will when i ll get free time
Yah please add governors @Dreamstar..
Update:
* Added Governor
* Compiled Using Gcc 4.8 toolchain
Thank you so much @Dreamstar.. how can i flash it with out pc? Im using cwm recovery..
you may change to TWRP and install boot.img
just install twrp via terminal emulator then rename boot.tar.md5 to boot.tar and open it via es file explorer and extract it then go to twrp and flash boot.img and choose boot
Sent from my SM-G360H using XDA Free mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
The kernel is based off latest sources from Samsung and is compatible with all roms . Over stock kernel this kernel possesses following enhancements
Insecured
adb runnable as root
init.d support
Fsync On/Off switch.
Overclocked to 1.6Ghz and Underclocked to 200Mhz
Built Using Linaro- 5.2 Toolchain.
Frandom driver- Fast Kernel Number Generator..
Support for crc-toggle..
Add LZ4 decompressor module
Add support for Zswap.
Upstream ZRAM with lz4 compression.
Now powered by AROMA Installer.
Support for Gentle fair sleeper toggle.
Dynamic Fsync Control - A driver originally written by faux123- Disables Fsync when phone is being used causing significant IO boost.
Power efficient workqueue
SELinux set to permissive
Automatic busybox installation
Lock initial TCP window size to 64k (Improves network ping and output)
Improved filesystem mounting flags - NOATIME and NODIRATIME
Huge update to kernel.org mainline 3.10.105
IOScheduler
block: Added ROW IOScheduler
Disabled CRC check in MMC for 30% extra performance with IO
block: Add BFQ IOScheduler
block: Add FIOSP scheduler
Faux Sound Control 2.0 - A sound hack driver by faux123 ported to sprd codecs by me
Uses live Ramdisk patching during flashing, so need not worry about ROMs on which you are flashing on.
Optimized square root algorithm
Governors enabled: ondemand, interactive.
IntelliPlug- Great balance between battery life and performance
Optimizations to SLUB memory allocator
Disabled MMC CRC check for extra 30% boost in IO
zRAM compression algorithm
Optimized Console FrameBuffer for upto 70% increase in Performance.
Support for ARCH_Power to reduce Power-Consumption and increase Battery-Life.
Kernel Samepage Merging
Enabled arch power
Support for Larch Power feature (should improve Battery-Life).
Added bunches of TCP Congestion Algorithm
ARM: Removed various debug traces
Download:
Method1:
Install Vegito kernel updater app from Play Store
Download and Install.
Free Version
Paid Version
Method 2:
You can download from here
Vegito 4.5
Google+ Community (Beta testing and releases)
https://plus.google.com/u/0/communities/107248021342303532678
INSTRUCTIONS
Just flash the zip in twrp and you are good to go!
XDA:DevDB Information
Vegito Kernel , Kernel for the Samsung Galaxy Core Prime
Contributors
Dreamstar
Source Code: https://github.com/DreamStar001/android_kernel_samsung_coreprimeve3g_vegito
Kernel Special Features:
Version Information
Status: Beta
Created 2016-09-08
Last Updated 2017-05-22
Reserved
Changelog
Vegito 4.2 - 11/April/2017
Code:
- Now powered by AROMA Installer.
- Faux Sound Control 2.0 - A sound hack driver by faux123 ported to sprd codecs by me
- Huge update to kernel.org mainline 3.10.105
- Support Fsync & Software CRC Control.
- Smart ramdisk patching mechanism- low size, wider compatibility
- NOATIME and NODIRATIME by default
- Compatible with all roms? ( Not tested yet )
Vegito 3.0 -09/Nov/16
Code:
-Upstream update to 3.10.102
-SELinux set to permissive
-Disabled Gentle fair sleepers
-Overclocked to 1.4GHz
-Added frandom driver
-Added ThunderPlug CPU hotplug
-Added lionfish governor
-Enabled arch power
-Dynamic Fsync Control
-Other Performance improvements
-ARM: Removed various debug traces
Vegito 2.0 - 20/Sep/16
Code:
-Added Bunches of TCP Congestion Algorithm
-Added Fiosp , Sioplus , Zen Scheduler
-Added CPU Hotplugs ported by @doesnexits
-IntelliPlug
-MSM Hotplug
-Bricked Hotplug
-Alucard Hotplug
-init.d support
-Automatic busybox installation
-Improved boot time
-Other optimizations
Vegito 1.0
Code:
- Initial Release
Wait
It's a kernel but we flash a Boot.img in boot sector?
Also can't i just use apps like Rashr?
ETheHedgehog said:
Wait
It's a kernel but we flash a Boot.img in boot sector?
Also can't i just use apps like Rashr?
Click to expand...
Click to collapse
Flashing via recovery is recommended as stated in OP. Don't bomb thread with stupid questions.
What app would you recommend so that we can further tweak, or adjust the settings?
Paolonicus said:
What app would you recommend so that we can further tweak, or adjust the settings?
Click to expand...
Click to collapse
Use kernel adiutor .
Gamersab said:
Flashing via recovery is recommended as stated in OP. Don't bomb thread with stupid questions.
Click to expand...
Click to collapse
Thanks for being so "polite" ._.
I'll test this when i can
There are no CPU Hotplugs.
Paolonicus said:
There are no CPU Hotplugs.
Click to expand...
Click to collapse
Hello sorry about the delay check thread again i updated link ( vegito 2.0 )
Regards
Hello! Thanks for your work. In the 2nd version as well as in the first time is not displayed in the use of frequencies CPU Spy Plus-Free. What can you say about this?
BoxaS said:
Hello! Thanks for your work. In the 2nd version as well as in the first time is not displayed in the use of frequencies CPU Spy Plus-Free. What can you say about this?
Click to expand...
Click to collapse
Use kernel auditor
Request:
Next build should include NTFS support too.
Gamersab said:
Request:
Next build should include NTFS support too.
Click to expand...
Click to collapse
You need OTG?
doesntexits said:
You need OTG?
Click to expand...
Click to collapse
OTG is already supported by our device.
V2.0 Update
Changelog
Added Bunches of TCP Congestion Algorithm
Added Fiosp , Sioplus , Zen Scheduler
Other optimizations
I tried your custom kernel v 3.0 but it made bootloop for me, plz fix it
my device is core prime SM-G361H
Thanks at all
magaedy said:
I tried your custom kernel v 3.0 but it made bootloop for me, plz fix it
my device is core prime SM-G361H
Thanks at all
Click to expand...
Click to collapse
Are you running stock? If yes then enable OEM Unlock in developer options.
I'm already enabled OEM unlock, but still make bootloop
magaedy said:
I'm already enabled OEM unlock, but still make bootloop
Click to expand...
Click to collapse
Are you sure your phone model is g361h?
V-3.0 Update
Changelog
Upstream update to 3.10.102
SELinux set to permissive
Disabled Gentle fair sleepers
Overclocked to 1.4GHz
Added frandom driver
Added ThunderPlug CPU hotplug
Added lionfish governor
Enabled arch power
Dynamic Fsync Control
Other Performance improvements
ARM: Removed various debug traces
You know where to get the latest stuff, dont you?
Also first post updated
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
Ahoy everyone,
I decided to share my personal custom kernel with all of you. The main reason i started developing this kernel is to balance performance / battery / security and also add features.
I believe i have included most of the usually requested features. If your feature is not included you can ask for it and i will try to include it as long as you don't ask for ETA's. I am a student and i do this on my spare time.
This kernel is based on LineageOS 16.0 sources for bullhead and has been upstreamed to version 3.10.108.
Moreover, it is compiled with GNU GCC Toolchain which is based on latest gnu.org changes and patched with AOSP and Linaro Android patches for optimal performance/battery.
So let's jump to the interesting part!
Sphinx Kernel Features
Upstream Linux version from 3.10.73 to 3.10.108
Compiled with GNU GCC Toolchain 8.2.1
Built with -O2 optimizations
Makefile Optimizations
Always Latest Security Patch (December)
Some CVE Patches
Overclock to 2150 MHz for the Big and 1747 MHz for the Little
Underclock to 302 MHz for Big & Little
Faux Sound Control
High Performance Audio
Adreno Idler
AdrenoBoost
Adaptive Low Memory Killer
LazyTime Support for ext4
Qnovo Charging Interface
Boeffla Wakelock Control
Input Boost Driver
USB Fastcharge
Power Efficient Workqueues
Dynamic Fsync v2.1
sdFAT Support
Overclocked SLIMbus
WiFi Channel Bonding
mac80211 Injection Patch
Thermal Threshold Control
WireGuard Support
ARCH_POWER Interface
Voltage Control (A53) - (A57)
Frandom Support
Hima Hotplug
MSM_Hotplug v2.4
MSM Thermal Patches by @jollaman999
New Square Root Algorithm
Powersuspend v1.7 Support
Earlysuspend Support
Process Reclaim (Enabled by default)
UKSM Support (Disabled by default)
CRC Toggle - 30% Boost
Kcal Advanced Color Control
TouchBoost Control (Disabled by default)
Backlight Dimmer
Vibration Control
exFAT Support
WakeUp Boost Driver
Does NOT force encryption
Fingerprint Boost Driver
DoubleTap2Wake
Sweep2Sleep
Sweep2Wake
Camera Launch Gesture
Pass SafetyNet without Root/Magisk
Gentle Fair Sleepers Control
NetFilter Advanced Options
TTL Target
Governors : relaxed, chill, Intelliactive, blu_active, interactive, ondemand, userspace, powersave, performance
I/O Schedulers : noop, deadline, row, cfq, maple, fiops, sio
TCP Options : bic, cdg (default), westwood, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois
Atheros 9 Wireless Cards Support
Ralink 27xx / 28xx / 30xx Wireless Cards Support
BLOD Support
Pie 9.0.0 Support
ext4 Upstream Commits from 3.18 and 4.1
Zipped up with AnyKernel2 from @osm0sis
Special Thanks
@razorloves, @nathanchance, @mr.ace, @flar2
Notes
I bear absolutely no responsibility. If you brick your device. If you are not sure what a kernel is, how to flash it or how to restore your phone in case something goes wrong then do NOT proceed.
Morever, you should flash this kernel only over the stock kernel that came with your Rom.
Downloads - Version 3.6
Sphinx 3.6 : https://www.androidfilehost.com/?fid=6006931924117911438
Sphinx 3.6 : without OC : https://www.androidfilehost.com/?fid=6006931924117911451
Note: The ONLY difference is Overclocking.
/-----------------------------------------------------------------------------/
I have dedicated countless hours developing this kernel so if you like my work consider buying me a coffee to help me stay awake an keep improving Sphinx. Click Here for Coffee
/-----------------------------------------------------------------------------/
XDA:DevDB Information
Sphinx Kernel, Kernel for the LG Nexus 5X
Contributors
milouk
Source Code: https://github.com/milouk/Sphinx-Kernel-Bullhead
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.6
Stable Release Date: 2019-07-07
Created 2018-05-07
Last Updated 2019-07-07
Changelog
Version 2.1
- May Security Patch
Version 2.2
-Dynamic Fsync
Version 2.3
- Software CRC Toggle - 30% Boost (Disabled by Default)
- Maple IO Scheduler by @frap129
- Chill Governor by @frap129
- Intelliactive Governor
- Power Efficient Workqeues
- Quick Wakeup
- Cleaned AnyKernel script
- SafetyNet Pass
-Patched the following CVEs :
CVE-2018-7480
CVE-2017-18193
CVE-2017-18174
- Improved msm_thermal
- Improved adreno_idler
Version 2.4
- Added FIOPS I/O Scheduler
- Added SIO I/O Scheduler
- exFAT Support
- Improved adreno_tz
- Improved power efficient workqueue
- Cleaned AnyKernel script
- Migrated to new github repo
Version 2.5
-Created AnyKernel2 script from scratch
-Overclock default values are stock 1824 Mhz for the Big and 1440 Mhz for the Little.
-TouchBoost is disabled by default now.
-Does not force encryption (for non-rooted users)
Version 2.6
-Enable KSM
-Support UKSM
-Now Compiling with UBER Toolchain 4.9.4
Version 2.7
-Merged June Security Patch (OPM6.171019.030.B1)
-Patched the following CVEs :
CVE-2018-10124
CVE-2018-10087
CVE-2018-10021
CVE-2018-6927
CVE-2017-18255
-Added WireGuard Support
-Added Gentle Fair Sleepers Control (Disabled = More Responsive UI)
-Added Lazyplug Hotplug (Disabled by default)
-Added Frandom Support
-Added CDG Congestion Control
-Enabled TCP Algorithms : bic, cdg (default), westwood, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois
-Drop Caches every time screen goes off
-Disabled by default UKSM
-Removed test-iosched from IO Schedulers
-Improved Fingerprint Boost Driver
-Improved UKSM
-Improved Power Efficient Workqueues
Version 2.8
-Enabled ARCH_POWER
-Ensured GENTLE_FAIR_SLEEPERS are disabled
-Removed Lazyplug
-Ported Hima-Hotplug to Bullhead
-Added More Frequencies - Further OC
-Added Voltage Control for Little (A53) and Big (A57)
-Entropy Adjustments
-Updated WireGuard Backend to version 0.0.20180613
-SafetyNet improvements
-Fixed Big Core Frequencies not sticking after a reboot
Version 2.9
-Added Wake Up Boost
-Default Thermal Threshold is now 43
-Prioritize Fingerprint unlock when screen is off
-Display Optimizations for better battery
-Workqueue Improvements
-Merged a "hack" that can improve internet speed
-Fixed the bug that didn't let UnderVolting the highest frequency of the A57
-Update WireGuard Backend Module to version 0.0.20180625
-sdFAT Support for vFAT and exFAT
-Added Relaxed Governor
-Adapted Chill Governor to Little.Big Architecture
-Overclocked SLIMbus
-Now Compiling with UBER Toolchain 8.0.0
-Makefile Optimizations for better performance
Version 3.0
-July's Security Patch (OPM6.171019.030.E1)
-No more LED Animations when charging
-Charging BUG Patch
-Patched the following CVEs :
CVE-2018-11232
CVE-2018-10940
CVE-2018-10675
Version 3.1
-USB FastCharge
-ext4: Support Lazytime
-Added MSM_HOTPLUG v2.4
-New Square Root algorithm which is 3x Faster.
-Adreno improvements
-Added AdrenoBoost Parameter
-Further disable Gentle Fair Sleepers
-Added ARCH_POWER interface
-Disable add_random
-Numerous ext4 upstream commits from 3.18 and 4.1
-Thermal patches
-Many Low Memory Killer Improvements
-Added Adaptive Low Memory Killer
-SdFAT Upstream improvements
-Added Process Reclaim (enabled by Default)
-UKSM Improvements
-MSM8992 (Snapdragon 808) Upstream improvements from 4.10
-Qnovo Charging Interface
-SLIMBUS OC Fix
-Added PowerSuspend
-Added EarlySuspend
-Merged August Security Patch
-Updated Wireguard - 0.0.20180802
Version 3.2
-Merged September Security Patch
-Updated Wireguard
-Updated Toolchain to 8.0.1
-Added TTL Target Control
-Enabled Mangle
-Enabled Netfilter Advanced
-Set default Thermal Threshold to 43
Version 3.3
-Merge October's Security Patch
-Update WireGuard
-Mac80211 Injection Patch
Version 3.4
-Update WireGuard
-Merge November's Security Patch
Version 3.5
-Merge Lineage 16.0 Branch
-Updated WireGuard
-Now Compiling with Uber 9.0.0 Toolchain
Version 3.6
-Merge Lineage 16.0 Branch
-Merged Latest Security Patch
-Updated WireGuard
-Add Support for Atheros 9 Wireless Cards Support
-Add Support Ralink 27xx / 28xx / 30xx Wireless Cards Support
-Now Compiling with GNU GCC 8.2.1 Toolchain
Previous Versions
Sphinx Kernel v3.5
3.10.108 : https://www.androidfilehost.com/?fid=11410963190603867183
3.10.108 non OCed : https://www.androidfilehost.com/?fid=11410963190603867184
Sphinx Kernel v3.4
3.10.108 : https://www.androidfilehost.com/?fid=11410932744536996486
3.10.108 non OCed : https://www.androidfilehost.com/?fid=11410932744536996487
Sphinx Kernel v3.3
3.10.108 : https://www.androidfilehost.com/?fid=1322778262904018923
3.10.108 non OCed : https://www.androidfilehost.com/?fid=1322778262904018924
Sphinx Kernel v3.2
3.10.108 : https://www.androidfilehost.com/?fid=1322778262904007553
3.10.108 non OCed : https://www.androidfilehost.com/?fid=1322778262904007554
Sphinx Kernel v3.1
3.10.108 : https://www.androidfilehost.com/?fid=5862345805528067884
3.10.108 non OCed : https://androidfilehost.com/?fid=5862345805528067905
Sphinx Kernel v3.0
3.10.108 : https://www.androidfilehost.com/?fid=5862345805528043411
3.10.108 non OCed : https://www.androidfilehost.com/?fid=5862345805528043412
Sphinx Kernel v2.9
3.10.108 : https://www.androidfilehost.com/?fid=11050483647474829955
3.10.108 non OCed : https://www.androidfilehost.com/?fid=11050483647474829898
Sphinx Kernel v2.8
3.10.108 : https://www.androidfilehost.com/?fid=674106145207495299
3.10.108 non OCed : https://www.androidfilehost.com/?fid=890278863836293765
Sphinx Kernel v2.7
3.10.108 : https://www.androidfilehost.com/?fid=674106145207491233
3.10.108 non OCed : https://www.androidfilehost.com/?fid=674106145207491235
Sphinx Kernel v2.6
3.10.108 : https://www.androidfilehost.com/?fid=818222786056033324
3.10.108 non OCed : https://www.androidfilehost.com/?fid=818222786056033322
3.10.73 : https://www.androidfilehost.com/?fid=890278863836289054
Sphinx Kernel v2.5
3.10.108 : https://www.androidfilehost.com/?fid=890278863836286578
3.10.108 non OCed : https://www.androidfilehost.com/?fid=890278863836287556
3.10.73 : https://www.androidfilehost.com/?fid=746163614322265715
3.10.73 non OCed : https://www.androidfilehost.com/?fid=746163614322266775
Sphinx Kernel v2.4
3.10.108 : https://www.androidfilehost.com/?fid=818222786056031224
3.10.73 : https://www.androidfilehost.com/?fid=674106145207487712
Sphinx Kernel v2.3
3.10.108 : https://www.androidfilehost.com/?fid=962339331458992112
3.10.73 : https://www.androidfilehost.com/?fid=890278863836285317
Sphinx Kernel v2.2
3.10.108 : https://www.androidfilehost.com/?fid=818222786056029670
3.10.73 : https://www.androidfilehost.com/?fid=674106145207486155
Sphinx Kernel v2.1
3.10.108 : https://www.androidfilehost.com/?fid=962339331458991065
3.10.73 : https://www.androidfilehost.com/?fid=818222786056029267
This kernel must be so good it needs 3 threads! Gosh darn it's gonna be good
Phalanx7621 said:
This kernel must be so good it needs 3 threads! Gosh darn it's gonna be good
Click to expand...
Click to collapse
Yep haha, just a mistake due to his internet connection probably.
Phalanx7621 said:
This kernel must be so good it needs 3 threads! Gosh darn it's gonna be good
Click to expand...
Click to collapse
francos21 said:
Yep haha, just a mistake due to his internet connection probably.
Click to expand...
Click to collapse
Hahaha yeah guys sorry. I submitted it once but it took hours loading and it got submitted 3 times. Since then i deleted the other 2 but they still show up. Hopefully one moderator will fix this!
I'm excited to try this kernel, thanks a lot for the hard work ?
Phalanx7621 said:
I'm excited to try this kernel, thanks a lot for the hard work
Click to expand...
Click to collapse
Since its my first kernel i am currently waiting for androidfilehost to grant me developer access. If this does not happen the next few hours i will upload the files manually.
Do you know that lowering CPU frequencies on this device is useless as it's running on the same voltage.
francos21 said:
Do you know that lowering CPU frequencies on this device is useless as it's running on the same voltage.
Click to expand...
Click to collapse
Yes i do know it. But some users still request it so who am i to disagree? ? Its a harmless feature that brings joy to some users
Flashing this kernel it show as Zestkernel. May you send a screenshot ? To be sure.
zurik said:
Flashing this kernel it show as Zestkernel. May you send a screenshot ? To be sure.
Click to expand...
Click to collapse
That is impossible...are you sure you flashed the correct zip? I have not even cherry picked a single commit from Zest Kernel
milouk said:
That is impossible...are you sure you flashed the correct zip? I have not even cherry picked a single commit from Zest Kernel
Click to expand...
Click to collapse
It's based on LineageOS kernel, right? I flash it on AOSiP but it don't want to flash.
zurik said:
It's based on LineageOS kernel, right?
Click to expand...
Click to collapse
Yes you can see the source code. Its base on Lineage 15.1 source. Also im Greek too so if you have anu further inquiries you are more than welcome to DM me. :laugh:
Version 2.1
* May Security Patch
Version 2.2
* Dynamic Fsync
Cool. Thanks
jugoslavpetrovic said:
Cool. Thanks
Click to expand...
Click to collapse
You are welcome! Did you try it? :laugh:
Is there an option to change the thermal throttling temperature for the CPU with your kernel?
dogedoge said:
Is there an option to change the thermal throttling temperature for the CPU with your kernel?
Click to expand...
Click to collapse
Of course, with any kernel manager app if rooted.
---------- Post added at 03:41 PM ---------- Previous post was at 03:35 PM ----------
milouk said:
You are welcome! Did you try it? :laugh:
Click to expand...
Click to collapse
Well, first I forgot to flash supersu together and my device automatically got encrypted which Im not fan of.
I like the idea having Adreno Idler, almost forgot about the feature, lol.
I think you could add cpu workque feature, just suggestion.
So far, it acts a bit laggy but its still too early to say and it could be from thermal which I keep at 42 and its hot today where I am now but will see later.. i will run this kernel for some days to see. Thanks