@superr
I'm having some trouble with ROM builds for the pixel XL. I made a bone stock ROM. It boots but has Bluetooth share force close. I think it's due to not being able to use sparse for perms. Currently trying with may build. I'm on Linux mint 18.1
toknitup420 said:
@superr
I'm having some trouble with ROM builds for the pixel XL. I made a bone stock ROM. It boots but has Bluetooth share force close. I think it's due to not being able to use sparse for perms. Currently trying with may build. I'm on Linux mint 18.1
Click to expand...
Click to collapse
It could be missing metadata. Are you starting with this fimware? I can unpack it and locate the files with unique permissions. It may help figure out what is missing. Not using sparse dat is not your issue. set_metadata will work once we track down the problem.
SuperR. said:
It could be missing metadata. Which firmware are you starting with? I can unpack it and locate the files with unique permissions. It may help figure out what is missing. Not using sparse dat is not your issue. set_metadata will work once we track down the problem.
Click to expand...
Click to collapse
Do you want a copy of the current project I have in kitchen. I can upload it to my drive. I just used the zip from the may factory image.
Edit
Wow I just realized that was a link lol. I totally misread lol. Yes I'm using that firmware.
toknitup420 said:
Do you want a copy of the current project I have in kitchen. I can upload it to my drive. I just used the zip from the may factory image.
Edit
Wow I just realized that was a link lol. I totally misread lol. Yes I'm using that firmware.
Click to expand...
Click to collapse
You did not misread, i changed it I will check it out when I get a chance. No need to upload your project.
toknitup420 said:
@superr
I'm having some trouble with ROM builds for the pixel XL. I made a bone stock ROM. It boots but has Bluetooth share force close. I think it's due to not being able to use sparse for perms. Currently trying with may build. I'm on Linux mint 18.1
Click to expand...
Click to collapse
Can you try this updater-script to see if it fixes the issue? There are actually 2 attached, with_vendor and no_vendor in case you extracted vendor too. If you replace it in the kitchen, make sure you zip the ROM manually because the kitchen will change it before zipping based on the files you have.
SuperR. said:
Can you try this updater-script to see if it fixes the issue? There are actually 2 attached, with_vendor and no_vendor in case you extracted vendor too. If you replace it in the kitchen, make sure you zip the ROM manually because the kitchen will change it before zipping based on the files you have.
Click to expand...
Click to collapse
so i cant zip manually because i dont have perms for one file in system. heres a pic. ill just add the script into an existing zip i built from kitchen.was
update
so i was able to move the script into the correct location and zip up the file. however when it flashes the updater script is somehow becoming merged with the original instead of just the new script. it still shows the original script text when flashing.
toknitup420 said:
so i cant zip manually because i dont have perms for one file in system. heres a pic. ill just add the script into an existing zip i built from kitchen.was
update
so i was able to move the script into the correct location and zip up the file. however when it flashes the updater script is somehow becoming merged with the original instead of just the new script. it still shows the original script text when flashing.
Click to expand...
Click to collapse
I will build a rom and upload for you to try. Are you building with vendor included or without?
SuperR. said:
I will build a rom and upload for you to try. Are you building with vendor included or without?
Click to expand...
Click to collapse
I built it without. Do you recommend to build it with vendor. Should that file be root like that. The one that's in that pic I sent.
toknitup420 said:
I built it without. Do you recommend to build it with vendor. Should that file be root like that. The one that's in that pic I sent.
Click to expand...
Click to collapse
Here is the marlin n2g47o test rom:
https://www.androidfilehost.com/?fid=817550096634774971
It is up to you about vendor. You must have matching vendor and system or the rom will not boot. If you inform users they must flash the corresponding vendor.img along with the rom you don't need to include it. The test rom does not include vendor so make sure you have the correct vendor flashed.
The root file you refer to is actually a directory symlink and should not be there at all. I have fixed this behavior locally and in this test rom. If all works, I will push the update.
SuperR. said:
Here is the marlin n2g47o test rom:
https://www.androidfilehost.com/?fid=817550096634774971
It is up to you about vendor. You must have matching vendor and system or the rom will not boot. If you inform users they must flash the corresponding vendor.img along with the rom you don't need to include it. The test rom does not include vendor so make sure you have the correct vendor flashed.
The root file you refer to is actually a directory symlink and should not be there at all. I have fixed this behavior locally and in this test rom. If all works, I will push the update.
Click to expand...
Click to collapse
OK I'll try it now. Good looks.
SuperR. said:
Here is the marlin n2g47o test rom:
https://www.androidfilehost.com/?fid=817550096634774971
It is up to you about vendor. You must have matching vendor and system or the rom will not boot. If you inform users they must flash the corresponding vendor.img along with the rom you don't need to include it. The test rom does not include vendor so make sure you have the correct vendor flashed.
The root file you refer to is actually a directory symlink and should not be there at all. I have fixed this behavior locally and in this test rom. If all works, I will push the update.
Click to expand...
Click to collapse
it flashes with no errors but it wont boot past splash screen.
toknitup420 said:
it flashes with no errors but it wont boot past splash screen.
Click to expand...
Click to collapse
Please try marlin n2g47o test rom 2:
https://www.androidfilehost.com/?fid=745425885120737663
SuperR. said:
Please try marlin n2g47o test rom 2:
https://www.androidfilehost.com/?fid=745425885120737663
Click to expand...
Click to collapse
flash went through without error but still boot looping at splash screen.
toknitup420 said:
flash went through without error but still boot looping at splash screen.
Click to expand...
Click to collapse
Moved to a dedicated thread as this issue is only about Pixel.
I will do more thinking on what could be causing it. I was pretty sure the last rom would fix it but clearly I was wrong lol
SuperR. said:
Moved to a dedicated thread as this issue is only about Pixel.
I will do more thinking on what could be causing it. I was pretty sure the last rom would fix it but clearly I was wrong lol
Click to expand...
Click to collapse
Lol good stuff. Keep me posted. I'll test whatever you throw at me.
toknitup420 said:
Lol good stuff. Keep me posted. I'll test whatever you throw at me.
Click to expand...
Click to collapse
Here is a new approach so I don't have to keep uploading full roms. Use the kitchen to extract the last rom I sent into a new project. In your file manager, navigate to your project directory and delete the 00_project_files directory. Extract the attached file into your project directory. Build rom with kitchen. Test rom.
Next time, you won't need to extract the rom zip again, just replace the 00_project_files directory.
edit: forgot to mention, after replacing the 00_project_files directory with the one in the zip, change perm types to something else, then back to set_metadata. Then build your rom
SuperR. said:
Here is a new approach so I don't have to keep uploading full roms. Use the kitchen to extract the last rom I sent into a new project. In your file manager, navigate to your project directory and delete the 00_project_files directory. Extract the attached file into your project directory. Build rom with kitchen. Test rom.
Next time, you won't need to extract the rom zip again, just replace the 00_project_files directory.
edit: forgot to mention, after replacing the 00_project_files directory with the one in the zip, change perm types to something else, then back to set_metadata. Then build your rom
Click to expand...
Click to collapse
flashing seemed to hang at setting perms. but it eventually went through. still looping at splash screen though.
toknitup420 said:
flashing seemed to hang at setting perms. but it eventually went through. still looping at splash screen though.
Click to expand...
Click to collapse
Can you send the original updater script that booted but did not have bluetooth?
SuperR. said:
Can you send the original updater script that booted but did not have bluetooth?
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B4VEhClrJEWpNnJNVUJTRFV4ODQ/view?usp=sharing
https://drive.google.com/file/d/0B4VEhClrJEWpTmlYWC1CQ0s3LVE/view?usp=sharing
thats the binary and the script. i converted script to binary when i was building rom. this rom boots and runs ok other than bluetooth. its not completely stock though. i have my modded framework settings and system ui apks in there. but they are all signed so i dont think they would mess with anything.
toknitup420 said:
https://drive.google.com/file/d/0B4VEhClrJEWpNnJNVUJTRFV4ODQ/view?usp=sharing
https://drive.google.com/file/d/0B4VEhClrJEWpTmlYWC1CQ0s3LVE/view?usp=sharing
thats the binary and the script. i converted script to binary when i was building rom. this rom boots and runs ok other than bluetooth. its not completely stock though. i have my modded framework settings and system ui apks in there. but they are all signed so i dont think they would mess with anything.
Click to expand...
Click to collapse
Did you convert the new one you just tried after swapping 00_project_files to update-binary? If not, try it please. If so, try without please
Related
Someone who has done the whole DI01 update, please dump their system for me, or just the framework folder, apparently the one given to me had the stock android lockscreen patch applied to it lol.
Aside from that, the DI01 deodex works perfect, I opt_png'ed and zip_align'ed all the apk's, as well as the framework-res and twframework-res.
I will also need someone who knows how to sign updater-scripts to open the one attached, and just save it again properly and upload it for me. I am trying to get a flashable CW zip but the darn thing always gives me a status 6 error, which means the CW cannot read the updater script.
Sorry for the n00b question, but what benifit does deodexing provide? Also if there is another software update will I have to readd any .apk's to my /system folder?
Why not just flash your own system back to stock, then run the update, then dump /system? If you'd like an update script that doesn't update modem.bin, I already have one.
Assuming you're updating via CWM, why are you signing the zip? You don't need any signature, just zip the file up.
Is there anything involved in a dump besides just copying the files in /system?
namebrandon said:
Why not just flash your own system back to stock, then run the update, then dump /system? If you'd like an update script that doesn't update modem.bin, I already have one.
Assuming you're updating via CWM, why are you signing the zip? You don't need any signature, just zip the file up.
Click to expand...
Click to collapse
Because I am too lazy to go through all that.
I don't need it signed per say. More like opened, edited, and saved properly. It is said it is best to edit the update script in s Linux based environment which I don't have, but that notepad should suffice, yet when I save it with my notepad, I get the error of cw not being able to read it properly.
I have a fresh phone that just got the D101 update. Just need directions on what if anything is involved beyond just getting the /system directory via adb.
s44 said:
I have a fresh phone that just got the D101 update. Just need directions on what if anything is involved beyond just getting the /system directory via adb.
Click to expand...
Click to collapse
That is all I need. The only things I deodex are the contents of system/app and system/framework.
frostman89 said:
I don't need it signed per say. More like opened, edited, and saved properly. It is said it is best to edit the update script in s Linux based environment which I don't have, but that notepad should suffice, yet when I save it with my notepad, I get the error of cw not being able to read it properly.
Click to expand...
Click to collapse
Try a real editor, like bluefish or something.. Those scripts look like sh#! in notepad.
If no one has done it by tonight, just grab me on IRC and I'll do it under Linux for you.
Make sure you've got the file/directory structure right too.. You can't just throw a script in a zip file, but I'm sure you knew that. Myself and and a few others had the wrong directory structure at first, don't remember what error number that gave us though.. I think it just froze.
OK, how can I get it to you? I can't post links or (I think) files yet.
s44 said:
OK, how can I get it to you? I can't post links or (I think) files yet.
Click to expand...
Click to collapse
You can just zip it up and upload it to mediafire.com
Just splice up the link like WWW. Website. Com and I will just delete the spaces.
Mediafire upload just not working for some reason. Hm.
s44 said:
Mediafire upload just not working for some reason. Hm.
Click to expand...
Click to collapse
http://multiupload.com/
J1HDKEGYAR at multiupload
I'm using nightly 123. The program seems to work just like it's suppose to, no errors, but after I run the program I use Show me my IMEI and it still doesn't show that I have an IMEI no. I'm using ADB wireless to update the EMEI. The program runs and and reboots my nook afterwards.
I don't know what else to do, and i can't post in the developer's thread yet so I thought I'd ask here. Hope someone can tell me what I'm doing wrong. Thx
Well I still can't post in the right forum, does anyone have any ideas what I'm doing wrong? Thx
Sorry... didn't see this thread....
If you are using in-place... as it seem you are by the reboot... check to see if you have a /framework/framework.jar.bak present... you might also look at /rom and see if a file called imei is created there...
I'd say you have to have the framework.jar.bak file or you'd get the error that it had issues updating your device.
Since you are on CM7... go to phone app and dial *#06# and see what it tells you for IMEI.
Lastly... you can update the rom zip file... and flash the rom "-IMEI.zip" file.
Sorry... but this is the first report I've seen of it not working... and it may be the app you're using to show it... thus try the phone app thing.
Did not workforce me either. Using the dialer to check returns no number. I do have a framework.jar.Bak though. I'd really like this to work so that I could use the xda app with out it fcing. What file were u saying to flash DD? Thanks.
If you are using in-place... as it seem you are by the reboot... check to see if you have a /framework/framework.jar.bak present... you might also look at /rom and see if a file called imei is created there...
I'd say you have to have the framework.jar.bak file or you'd get the error that it had issues updating your device.
Since you are on CM7... go to phone app and dial *#06# and see what it tells you for IMEI.
Lastly... you can update the rom zip file... and flash the rom "-IMEI.zip" file.
Sorry... but this is the first report I've seen of it not working... and it may be the app you're using to show it... thus try the phone app thing.
__________________
Always remember...
1. I have the framework.jar.bak file
2. In the /Rom folder there isn't an imei file, but there is one in the /rom/devconf folder
3. When I dial the command in the phone app it comes back with a box that says imei then an OK button. There is no number if thats what you wanted to know.
4. I'm not exactly sure on the steps to update the rom zip file.
Thanks alot for answering my post.
OK... and I did mean the bak file should be in /rom/devconf... sorry bout that... was responding from work and in a hurry....
To update the rom... just tell it no to in place... and then yes to updating a ROM zip file...
After it finishes patching the zip file... flash the ROM "-IMEI.zip" and any OC kernel you're using.
I'll look into what's going on... it could be the newer rom update is missing symlinks and busybox is not working correctly... researching the cause.
DizzyDen said:
OK... and I did mean the bak file should be in /rom/devconf... sorry bout that... was responding from work and in a hurry....
To update the rom... just tell it no to in place... and then yes to updating a ROM zip file...
After it finishes patching the zip file... flash the ROM "-IMEI.zip" and any OC kernel you're using.
I'll look into what's going on... it could be the newer rom update is missing symlinks and busybox is not working correctly... researching the cause.
Click to expand...
Click to collapse
Will try it After work. I'm assuming it prompts u for the path to a zipped rom, and then creates one with imei added in the name. Then flash like n e other rom. Thanx.
Thx for the quick reply's. I updated the rom.zip file like you said. I think I'll wait to try it to see if you can figure out how to get the in-place update to work. I just updated the recent nightly and hate to start over again . If I have to I will though. Thx alot for your help.
newellj79 said:
Will try it After work. I'm assuming it prompts u for the path to a zipped rom, and then creates one with imei added in the name. Then flash like n e other rom. Thanx.
Click to expand...
Click to collapse
If it finds zip files in current directory... it will attempt to locate the newest (by filename) and prompts you if it is the correct one... if you click no... it opens a windows open dialog to browse to the zip file you want to update... the "-IEMI.zip will be placed in the same folder as the rom.zip.
lemdaddy said:
Thx for the quick reply's. I updated the rom.zip file like you said. I think I'll wait to try it to see if you can figure out how to get the in-place update to work. I just updated the recent nightly and hate to start over again . If I have to I will though. Thx alot for your help.
Click to expand...
Click to collapse
If you flash the update... you don't have to start over... it retains your data... just like any other update. You just have to make sure you install the OC kernel also... it is the same process as updating any nightly... the only difference is you run the IMEI generator on it prior to flashing it so you will have the patched framework.jar as soon as you flash it.
I just flashed the file your program created and I still have no imei no. when running the phone app or with the program Show me my Imie. I don't know if I'm doing something wrong or not, but everything seemed to work as it was suppose to except getting an Imei no. Thx.
lemdaddy said:
I just flashed the file your program created and I still have no imei no. when running the phone app or with the program Show me my Imie. I don't know if I'm doing something wrong or not, but everything seemed to work as it was suppose to except getting an Imei no. Thx.
Click to expand...
Click to collapse
hmmmm.... trying to see what the issue could be.... if you flashed the "-IEMI.zip" file the patched framework.jar file should be the one it installed... so it SHOULD work just fine.
Try running fix permissions and try in-place again... it could be that your permissions are preventing /system/framework/framework.jar being overwritten.
You can open the "-IMEI.zip" file in a zip file manager (winzip, 7zip, winrar) and see if the /system/framework/framework.jar file has a different date than the rest of the files.
In the rom zip file your program made the date of the framework jar was modified to today's date. I ran rom manager and fix permissions and rebooted then ran in place from your program. I still don't get a number with either phone or show me my emei. I also don't get any errors while running your program.
lemdaddy said:
In the rom zip file your program made the date of the framework jar was modified to today's date. I ran rom manager and fix permissions and rebooted then ran in place from your program, all appears to be good, no errors.
I still don't get a number with either phone or show me my emei.
Click to expand...
Click to collapse
This is just crazy... if the zip had the framework.jar file with today's date... it should be the one installed.. and it should have the imei in it...
Do me a favor... extract framework.jar from your zip file... email it to me at [email protected] so I can look into it and ensure the edit to the file went as planned.... or wait and I'll give the option to not delete the TelephonyManager.smali so you can look at the file and ensure the edit took place.
try this...
adb shell ls -l /system/framework
See what the date and time on that file is.
Ok i sent the framework.jar file, thx alot for your help.
lemdaddy said:
Ok i sent the framework.jar file, thx alot for your help.
Click to expand...
Click to collapse
NP... I got the file... for some reason the patch seems to not be in the file... this is the framework.jar file from the -IMEI.zip file... right?
When you run the program... does it give you a pop up with your S/N, MAC and IMEI ?
yes it is from the updated emei.zip rom file. Yes it does show the numbers when i run your program after it pulls the file from my nook
lemdaddy said:
yes it is from the updated emei.zip rom file. Yes it does show the numbers when i run your program after it pulls the file from my nook
Click to expand...
Click to collapse
OK... check your pm... also if you will adb pull /rom/imei and email that... I will create a framework.jar for you until I can track down what is going on.
Phone call would probably be easiest to track down the issue... Gave you number in pm... or you can pm me your's if you'd rather me make the call.
I got it working by using the flash method. I'm finally able to use tthe xda app!
Sent from my NookColor using XDA App
I wish mine would have. Dizzy is looking into why mine still won't work. I'm glad yours is working. I appreciate all your help Dizzy
Lemdaddy... if we get a chance to make contact tomorrow... sat... I want to try a couple of things so we figure out why the smali isn't working on your computer...
Hello all you Triple-Booters out there! I would like to introduce to you:
Convert2Dualboot-SD Tool
What is this you ask?
This is a little tool that I've put together that will convert any standard flashable roms for our Nook Color to be DualbootSD compatible. No more waiting on my lazy arse to update you guys!!! I used APK manager as a base for my script. I've written 3 different versions that will run on Linux, OSX and Android. All neccesary binaries are included with each version.
Click to expand...
Click to collapse
Can I use any kind of flashable zips?
Yes and no. You could use any standard flashable "rom" or "gapps" zips only.
Click to expand...
Click to collapse
How do I use it?
You drop a standard rom .zip into a "rom-to-modify" folder. Then execute a shell script that will give you an option to convert it for flashing to Primary or Alternate boot on the DualbootSD.
Click to expand...
Click to collapse
Can I use any CWM Recovery for flashing?
Absolutely not! Only use the CWM Recovery that was included with the DualbootSD.
Click to expand...
Click to collapse
Will you be updating this to add new features and stuff?
Not sure what features I can add, but you can always check the CHANGE LOG in post 3.
Click to expand...
Click to collapse
Can you give us step by step directions on how to use this?
Of course! See second post for more details.
Click to expand...
Click to collapse
***Disclaimer: Usual disclaimer applies here as well... you use this at your own risk, I am not responsible for anything that happens to any of your devices. You assume all responsibility when using this tool.***
Credits:
Daneshm90 for the APK Manager Script I used as a base
Pinako/Inportb/Jyio/Boss! - for his Android binaries
DizzyDen - for porting this over to DOS and his many ideas to get the script to where it's at
HacDan - for some bash guidance
If I forgot someone else, please notify me.
Convert2Dualboot-SD Tool-README
Convert2Dualboot-SD-Linux v1.4
DOWNLOAD
*C2DSD=Convert2Dualboot-SD*
1-Extract the zip file you just downloaded anywhere on your system
2-In the C2DSD folder, there are 2 folders called "modify-for-pri" and "modify-for-alt". Copy your rom.zip and/or gapps.zip file into its respective folder. No need to rename the file as long as it has a .zip extension.
3-Open up terminal and cd into Convert2Dualboot-SD-Linux
4-At the termninal prompt execute the C2DSD script
Code:
$ sh convert*
5-This will give you a menu where you can choose to modify the "rom" and/or "gapps" for either Primary or Alternate boot. It will also give you an option to clear out recently modded zips. Now with option to mod both ROM & GAPPS on the fly. Just place both files inside either "modify-for-pri" or "modify-for-alt" and choose the option to modify both from the menu.
6-Choose your option and wait while it does its thing.
7-Once it's finished you can exit the program by choosing "0"
8-Now browse to the C2DSD folder and you can find your DualbootSD modded rom file either in "Primary-Mod" or "Alternate-Mod" depending on your earlier selection.
9-Copy that file to the /sdcard partition of your DualbootSD
10-Boot to CWM Recovery that is included with the DualbootSD
11-Flash and enjoy!
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------
Convert2Dualboot-SD-OSX v1.4
DOWNLOAD
*C2DSD=Convert2Dualboot-SD*
1-Extract the zip file you just downloaded anywhere on your system
2-In the C2DSD folder, there are 2 folders called "modify-for-pri" and "modify-for-alt". Copy your rom.zip and/or gapps.zip file into its respective folder. No need to rename the file as long as it has a .zip extension.
3-Open up terminal and cd into Convert2Dualboot-SD-OSX
4-At the termninal prompt execute the C2DSD script
Code:
$ ./convert*
5-This will give you a menu where you can choose to modify the "rom" and/or "gapps" for either Primary or Alternate boot. It will also give you an option to clear out recently modded zips. Now with option to mod both ROM & GAPPS on the fly. Just place both files inside either "modify-for-pri" or "modify-for-alt" and choose the option to modify both from the menu.
6-Choose your option and wait while it does its thing.
7-Once it's finished you can exit the program by choosing "0"
8-Copy that file to the /sdcard partition of your DualbootSD
9-Boot to CWM Recovery that is included with the DualbootSD
10-Flash and enjoy!
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------
Convert2Dualboot-SD-Android v1.4
DOWNLOAD
*C2DSD=Convert2Dualboot-SD*
1-This will allow you to modify the zip files directly on your Nook
2-Extract the zip file you just downloaded to the root of your DualbootSD /sdcard partition.
3-The folder should be named c2dsd
4-In the c2dsd folder, there are 2 folders called "modify-for-pri" and "modify-for-alt". Copy your rom.zip or gapps.zip file into its respective folder. No need to rename the file as long as it has a .zip extension.
5-Open up any Terminal Emulator and cd into the c2dsd folder which should be "/sdcard/c2dsd"
6-At the termninal prompt execute the C2DSD script
Code:
$ su
# sh convert*
7-This will give you a menu where you can choose to modify the "rom" and/or "gapps" for either Primary or Alternate boot. It will also give you an option to clear out recently modded zips. Now with option to mod both ROM & GAPPS on the fly. Just place both files inside either "modify-for-pri" or "modify-for-alt" and choose the option to modify both from the menu.
8-Choose your option and wait while it does its thing.
9-Once it's finished you can exit the program by choosing "0"
10-Now you can choose to boot to CWM Recovery that is included with the DualbootSD
11-Choose "install zip from sdcard" and browse to either "Primary-Mod" or "Alternate-Mod" depending on your earlier selection.
12-Flash and enjoy!
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------
Convert2Dualboot-SD-DOS v1.3
DOWNLOAD
*C2DSD=Convert2Dualboot-SD*
1-Extract the zip file you just downloaded anywhere on your system
2-In the C2DSD folder, there are 2 folders called "modify-for-pri" and "modify-for-alt". Copy your rom.zip and/or gapps.zip file into its respective folder. No need to rename the file as long as it has a .zip extension.
3-Open up command window and cd into Convert2Dualboot-SD-DOS or create a shortcut on your desktop
4-At the command prompt execute the C2DSD script
Code:
convert2dualboot-sd-dos
5-This will give you a menu where you can choose to modify the "rom" and/or "gapps" for either Primary or Alternate boot. It will also give you an option to clear out recently modded zips. Now with option to mod both ROM & GAPPS on the fly. Just place both files inside either "modify-for-pri" or "modify-for-alt" and choose the option to modify both from the menu.
6-Choose your option and wait while it does its thing.
7-Once it's finished you can exit the program by choosing "0"
8-Copy that file to the /sdcard partition of your DualbootSD
9-Boot to CWM Recovery that is included with the DualbootSD
10-Flash and enjoy!
Click to expand...
Click to collapse
And that's all she wrote... well he, being me.
If I've helped in anyway. Don't hesitate to hit the thanks button.
Change log:
v1.4 (6/8/2012)
-Fixed gapps being zipped with rom when converting rom & gapps together
-Added SDCacheMount to converted roms (see the SDCacheMount thread for more info)
-Fixed mkimage binary executing error for Linux version
-No DOS update yet.... DizzyDen?????
-Thanks goes to xda user "shumash" for the SDCacheMount addition into the script
v1.3a
-Mkimage error on Android Script fixed.
-Mkimage is dependent on 'libmusl.so' which I did not include and linked in the tools folder. I overlooked this tidbit because I had "BOTBREW" installed on my system so it never complained about linking to it.
v1.3
-I effed up on the script!
-RASTAVIPER kept asking me about issues with his gapps. Apparently the mod for Gapps Alt Boot had the wrong mount points inserted into the updater script. NOW I SEE IT!
-Also in the DOS version. Prep of ROM Alt Boot had the wrong mount points as well. Sorry guys.
-It's been fixed and uploaded. Please don't use v1.2 anymore. Thanks.
v1.2
-Changed up UI layout of script: Please re-read README from post 2 above for edited instructions.
-Edited script to speed up mod process (Thanks DizzyDen!)
-Added option to mod both "ROM & GAPPS" on the fly
-Android version now has a tool.img file. This makes modding quicker and safer.
-Added DOS version ported by DizzyDen! (Thank you sir!)
-Modding for EMMC dualboot version in the works???? (That's if you guys want it)
v1.1
-Added gapps option
-Cleaned up some scripting behaviors
v1.0
-Initial release
Well.. after some thought, it really didn't make sense to release this without an option to mod gapps for the DualbootSD. I mean what good is a rom without gapps?!
Convert2Dualboot-SD v1.1 is up if anyone wants to try.
Check post 3 for all changlogs.
Thanks,
Racks
Taking advantage of the opportunity to try something new, I made a dual-boot card for my sister-in-law.
This is cool. I actually haven't tested the card yet as I have my device flashed to internal and have modded the recovery some. I haven't backed up any of the changes I made (I know, I know) and don't want to have to do it again.
I may try updating the card now that you've included gapps, though. I hadn't made a bootable card since I first rooted this thing, and to be honest it was by accident even that time. So I was wondering how to get gapps, was thinking about setting an alt-recovery just for that.
But anyway, I hadn't looked at how to do the gapps yet, maybe it was easier than that. But this seems even easier.
Cool, man! I bet the dual/triple booters will love being able to make their own updates. The experience I had last night couldn't have been easier. My wife got me and her sister the Nooks at the same time, I am excited for her to see what I have been talking about the last six months.
I will be sure to try this once my NC gets here. Thanks!
Racks,
Works great but there's an odd 0 byte file in the DB zip called ^[email protected] Is that an artifact and can I just delete it?
shumash said:
Racks,
Works great but there's an odd 0 byte file in the DB zip called ^[email protected] Is that an artifact and can I just delete it?
Click to expand...
Click to collapse
DB zip? Sorry, but what are you referring to with that?
And could you also let me know which one you used? OSX, Linux, Android?
Edit: That might just be the stupid __MACOSX hidden folder that osx likes to include Forgot to exclude that and the .gitignore file when zipping. Although they aren't detrimental to running the C2DSD Tool, you can choose to delete them if you wish.
Thanks,
Racks
Thanks a lot Racks... great work... we'll get together and sort out the windows based version... can include it in your work here... or as another feature of the IMEI generator.
DizzyDen said:
Thanks a lot Racks... great work... we'll get together and sort out the windows based version... can include it in your work here... or as another feature of the IMEI generator.
Click to expand...
Click to collapse
Awesome to hear! Was hoping you would jump in.
We'll hook up and get the Windows based version here as well as incorporate it into your IMEI generator.
Thanks!
Racks
racks11479 said:
Awesome to hear! Was hoping you would jump in.
We'll hook up and get the Windows based version here as well as incorporate it into your IMEI generator.
Thanks!
Racks
Click to expand...
Click to collapse
Sounds like a plan... I just got in from work... and am off tomorrow.
DizzyDen said:
Thanks a lot Racks... great work... we'll get together and sort out the windows based version... can include it in your work here... or as another feature of the IMEI generator.
Click to expand...
Click to collapse
racks11479 said:
Awesome to hear! Was hoping you would jump in.
We'll hook up and get the Windows based version here as well as incorporate it into your IMEI generator.
Thanks!
Racks
Click to expand...
Click to collapse
+1 from a meathead windows user here.
Sent from my NookColor racks tripple boot using Tapatalk 2
racks11479 said:
DB zip? Sorry, but what are you referring to with that?
And could you also let me know which one you used? OSX, Linux, Android?
--SNIP--
Thanks,
Racks
Click to expand...
Click to collapse
Sorry for being vague. I meant the modded dualboot sd zip build. But I tried it again and it was fine, so let's say no more about it, eh?
On a related note, since you're so motivated now, how about creating those separate cache1 and cache2 partitions so that we don't have to wait so long to boot between the two?
Anyone who tried the new modding option and that would like to share with us which CM9 rom (nightly) did he convert and is working fine after conversion?
spdsl said:
+1 from a meathead windows user here.
Sent from my NookColor racks tripple boot using Tapatalk 2
Click to expand...
Click to collapse
Was hoping to have something before I had to go to work this morning... didn't get it completed...
to keep as close as Racks' I will have a DOS batch file available sometime tonight...
True Windows GUI version will be available early in the week.
Keeping with Racks' desires... both will be open source and stored on his github... I use AutoIT for windows programming these things.
shumash said:
On a related note, since you're so motivated now, how about creating those separate cache1 and cache2 partitions so that we don't have to wait so long to boot between the two?
Click to expand...
Click to collapse
Racks, I just sent you a PM that might help with this issue.
shumash said:
Racks,
Works great but there's an odd 0 byte file in the DB zip called ^[email protected] Is that an artifact and can I just delete it?
Click to expand...
Click to collapse
UPDATE: I converted the latest Mirage build, and when I tried to flash it, Recovery complained that it wasn't a valid zip file. Checked it and the same weird file was in the converted flashable zip. When I ran the conversion a second time, all was good and it flashed as expected. I had deleted all the extraneous _MACOSX and .gitignore file stuff prior to running it the first time. BTW, the problem in the quoted post was when I converted an ICS build the first time, too. Racks, do you think that there is something that occurs the first time the script is run that is different on subsequent runs that might account for this?
Just installed nightly 28.4 without Opengl and then gapps which appeared in the folder Primary Mod after conversion.
After that I cant get inside shop.I click to open it and it gets me back to main menu.
Any ideas?Reflashing of gapps didnt work.
RASTAVIPER said:
Just installed nightly 28.4 without Opengl and then gapps which appeared in the folder Primary Mod after conversion.
After that I cant get inside shop.I click to open it and it gets me back to main menu.
Any ideas?Reflashing of gapps didnt work.
Click to expand...
Click to collapse
Primary mod is for Primary boot. Default primary boot was CM7, so I'm assuming you formatted /system1 & /data1 before flashing?
Could you also unzip the contents of the converted gapps zip. And check the updater script. All /system variables should be /system1.
-Racks
I didn't format anything before flashing. I thought this as an upgrade, so after conversion I just proceed to flashing.
Finally, I flashed your own gapps that you have at your dualboot topic and now everything is back to normal.
Unfortunately, even after this upgrade, I still continue to deal with FC issues of mail, Facebook and of other random apps.I think there is some problem with my card and CM9, since CM7 runs perfect from emmc or from same mem card.
Unleashed from my Revolutionized Desire HD
From Sammobile new 4.4.2 P5210XXUBNH1
Luxor said:
From Sammobile new 4.4.2 P5210XXUBNH1
Click to expand...
Click to collapse
http://samsung-updates.com/device/
there is the download link i am downloading it right now.
will it work on my dutch tab 3 10.1?
damian312 said:
http://samsung-updates.com/device
there is the download link i am downloading it right now.
will it work on my dutch tab 3 10.1?
Click to expand...
Click to collapse
downloading now too, please report!
Downloading.
nowo said:
downloading now too, please report!
Click to expand...
Click to collapse
I am a little afraid to test it.
Do i have to flash through odin?
hey,
if you guys are hesitant, i'll test it. give me a couple of hours to get it and do the usual
@Restl3ss - dude OP look !
m
moonbutt74 said:
hey,
if you guys are hesitant, i'll test it. give me a couple of hours to get it and do the usual
@Restl3ss - dude OP look !
m
Click to expand...
Click to collapse
You are the man.
i wait for it
dead link bud!
RoninTPD said:
dead link bud!
Click to expand...
Click to collapse
http://samsung-updates.com/device/
not that hard to fix it:good:
Installing. can't wait to pull it apart.
CAG-man said:
Installing. can't wait to pull it apart.
Click to expand...
Click to collapse
cag,
when you are go can you pull the /system/vendor directory and post it?
also /system/bin/toolbox ?
my download just started , i can't wait !!
m
M,
I will do so.
Holy crap, finally!
damian312 said:
http://samsung-updates.com/device/
not that hard to fix it:good:
Click to expand...
Click to collapse
thanks!!:good:
CAG-man said:
Installing. can't wait to pull it apart.
Click to expand...
Click to collapse
Does it work?
The firmware works, but two things are proving to be very difficult.
one is extracting system.img, i dont know what's different, but the method i used for the 4.2 firmwares just crashes now.
two, and this is a big one
rooting it..
working on it
edit: super SU 1.9.4 zip from chainfire worked. No other method works though, the superuser apk will install but the binary doesn't stick
edit 2: successfully extracted the system image
notes
hey,
if the update with the t211 was any indication, be sure to only write boot.img and system.img
i am making a flashable zip and will post after i get it right and debloated and get the script correct.
realistically, sometime tomorrow, will update.
@Restl3ss okay so iam laughing at myself right now becuase i can not get the damned thing to write. i don't use windows
so no odin. i have tried dd writing the images but on boot i hang at logo and with no adb i can't get a visual on the problem.
i have a .zip put together to do the same and get the same. i have another zip set up ota style but can't script worth a damn.
can you whip up a script and post it?
an interesting note- in /sbin is a binary file named partlink. thoughts?
Restl3ss
@Restl3ss
okay so this is the joke
i am too poor to upload a large file to devhost. :laugh:
solution - i going to upload the otapackge for the firmware WITHOUT the system folder.
the package has the modified to unsecure boot.img and the updater script which just happens to be the
same one i am using for cm11 :laugh: :victory:
these are the instructions for converting, mounting and pulling the system image into an cwm flashable zip
to convert and mount sparse .img in terminal
simg2img system.img system.img.ext4
mount -o loop system.img.ext4 /a/directory
then nav to that directory in file browser, copy the contents of /system and insert in to package.
there is also a second step to correct issues with symlinks in vendor. drop that package into ota second
sorry for the inconvenience. it's in your folder with the patches.
but hey, i'm poor.
m
i'm running it right now and it seems very kitkatty
If i flash 4.4 can i still flash back to 4.2.2?
moonbutt74 said:
@Restl3ss
okay so this is the joke
i am too poor to upload a large file to devhost. :laugh:
solution - i going to upload the otapackge for the firmware WITHOUT the system folder.
the package has the modified to unsecure boot.img and the updater script which just happens to be the
same one i am using for cm11 :laugh: :victory:
these are the instructions for converting, mounting and pulling the system image into an cwm flashable zip
to convert and mount sparse .img in terminal
simg2img system.img system.img.ext4
mount -o loop system.img.ext4 /a/directory
then nav to that directory in file browser, copy the contents of /system and insert in to package.
there is also a second step to correct issues with symlinks in vendor. drop that package into ota second
sorry for the inconvenience. it's in your folder with the patches.
but hey, i'm poor.
m
i'm running it right now and it seems very kitkatty
Click to expand...
Click to collapse
got it system folder is properly extracted and what not, trying to deodex. About 10 apks are failing on every deodex attempt, can't figure out why. Gonna upload a 100% stock to xda anyway, deodexed + rooted will just have to come a bit later.
I have uploaded the OTApkg from my Verizon 10 downloaded 7/6/17. I have not been able to run it on my 10 because of customization issues.
I have also changed the suffix of the filename to "zip" so it could be uploaded. You may want to rename it before manipulating it. The default name is "OTApkg"
You can download it here and I welcome someone else's better ability to parse the file contents.
MD5 is: e684728237328c1a59c8c53ab2308467
I've now extracted the firmware.zip and created two update.zips, one without boot (but stock recovery) and one without both boot and recovery images. Someone reported to me that flashing the boot.img could be problematic -- I do not know the particulars, just reporting what I heard. I have not flashed these files, so you're on your own. If there are reports of problems, I'll pull the files.
2.41.605.20 firmware update (no boot) md5: 13b3461cbe2e1f9a8098d83115f501c8
2.41 605.20 firmware update (no boot; no recovery) md5: 97c1df3e7cbc9583b9916b4e1768f245
hgoldner said:
I have uploaded the OTApkg from my Verizon 10 downloaded 7/6/17. I have not been able to run it on my 10 because of customization issues.
I have also changed the suffix of the filename to "zip" so it could be uploaded. With past OTA's I've been able to extract the contents, but not so with this one. You may want to rename it before manipulating it. The default name is "OTApkg"
You can download it here and I welcome someone else's better ability to parse the file contents.
(Last OTA I actually ended up flashing with htc_fastboot partition-by-partition in download mode.)
Click to expand...
Click to collapse
I renamed mine also and was able to extract the contents. I have rezipped the files (Files only, not flashable) here is anyone wants them. Strange, 2gb ota but contents are 103mb. I did not install tho, just ran the update to pull the updated system img.
kc6wke said:
I renamed mine also and was able to extract the contents. I have rezipped the files (Files only, not flashable) here is anyone wants them. Strange, 2gb ota but contents are 103mb. I did not install tho, just ran the update to pull the updated system img.
Click to expand...
Click to collapse
NVM. Reread your post. Do you think the firmware would be flashable if renamed 2PS6IMG.zip?
hgoldner said:
NVM. Reread your post. Do you think the firmware would be flashable if renamed 2PS6IMG.zip?
Click to expand...
Click to collapse
I just tried it and it flashed. But remove the boot.img first. The. 20 boot.img won't work on. 18.
kc6wke said:
I just tried it and it flashed. But remove the boot.img first. The. 20 boot.img won't work on. 18.
Click to expand...
Click to collapse
Thanks, , my file may have been corrupted. Going to upload a file I could open on my workstation instead and re-link.
Original upload was corrupted; I've uploaded corrected file and added md5.
Added two firmware only update files, one without boot and one without boot or recovery.
Verizon getting Oreo ota
mattie_49 said:
Verizon getting Oreo ota
Click to expand...
Click to collapse
Yup.
hgoldner said:
Yup.
Click to expand...
Click to collapse
Can I now flash Maximum or Lee-Droid Oreo roms without having to do anything other than installing twrp first? That is correct isn't it?
mattie_49 said:
Can I now flash Maximum or Lee-Droid Oreo roms without having to do anything other than installing twrp first? That is correct isn't it?
Click to expand...
Click to collapse
I would go by the OP's in each of those ROM threads, but presumably you are now on Oreo firmware, so I don't see why not.
Maximus doesn't do vzw..